With the help of mark up tools on the second laptop

Similar Questions

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• HP Deskjet 3050 a J611 series. I have used this printer before with the same laptop. Error message #5

  I have a HP Deskjet 3050 a J611 all-in-one. I have used this printer with the same laptop that were purchased together.

  He was works fine, but now when I try the CD to install, an error message comes up with cannot load drivers or cannot find the port to monitor? I tried everything to implement without change.

  Have you tried to download the drivers from the Web site. Here is a link that will help you with it. http://goo.GL/BVOOg

• How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  original title: operating system

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  If the installation provided with your Windows computer discs was preinstalled on the computer - it is OEM and cannot be moved. You can move Windows to another computer if you buy the retail version.

  You can move the windows on a new computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade the new Windows computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

• with subscription can I download on the second laptop?

  With my monthly subscription of CC with Lightroom and Photoshop, I can download to the second laptop?

  Of course, you can install and activate the product on two computers as long as they do not work at the same time

  You can download the products link below

  Explorer Adobe desktop applications | Adobe Creative Cloud

• The license to use Photoshop Lightroom 4 with the second computer or not?

  I bought the lightroom version 4. For use with my computer last year. Now I have to buy a newer computer. I'm not sure. The license to use this program with the second computer or not ? only 1 computer . gold

  
  

  Details of the program
  
  

  AUT YOMYAI,

  
  Purchase of the end-user

  Yes, you can install and activate LR on 2 computers.

  Mylenium

• install master collection on the second laptop without cd player

  Hello experts,

  How can I install the master collection that I bought on the second laptop, which doesn't have a cd player?

  I do not download the product, but I have CD fpr licensed teacher.

  Your help is very appreciated!

  Best, Christiane

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -Membership questions and problems https://forums.adobe.com/thread/1146459

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  -for Lightroom https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• interruption of the wireless connection with the computer laptop and printer

  We have a printer HP6500 we lost the connection Wireless to our Dell laptop.  Whenever we need to print to bring the laptop to the floor and connect it with a cable to print.  I tried to close the printer downstairs next to the laptop and the router but it would not print wireless.  Any other suggestions?  Thank you. CK

  Hello

  Check with HP, their drivers support and online documentation and ask in their forums on any
  known issues. As OEM HP is responsible for the good operation of the printer and provided them with
  drivers.

  More than one 6500 printer
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Try resetting the printer with the latest drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My printer which is connected to a home group to not communicate with the computer laptop and Netgear is not connected to my computer

  Original title: 305 lemark printer s device

  My printer will stillnot communicate with the laptop.  It is in the homegroup?  Help

  In addition, my netgear will not or connect to my computer?

  Thanks in advance for your help

  Gary

  Hi Gary,

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Open the troubleshooter group living:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• How to pass a single form filed with the second shape parameter

  Hi all,
  I get the custom form a requirment.already one, just added the button when the button on a new form opens, this form with a logical filed.here is the first form a single block dat filed pass the second shape parameter
  
  
  Kind regards
  Sandrine

  994418 wrote:
  Hi, HAMID

  Hi stephane
  Good here we solve you your problems. If you share the solution other people can get the same kind of help from you.

  Also when you check the option add any thread as a response, if it solved * [SOLVED] * to the left of your subject line.

  Hamid

  Mark correct/good to help others to get the right answers. *

• Firefox won't let me copy the web address of the bar using the context menu with the second mouse button or trackpad to address

  Hello!

  I am writing to report a problem I have with the new patch v35 and v35.0.1 Firefox address bar

  With the new version 35 of Firefox on Mac OSX Yosemite, clicking with the right mouse button in the address bar to copy the web address, a context menu DO NOT allowed to copy the link, he shaded in grey, inactive... you click on an other browser zone before returning to click a second time and be able to copy the link in the context menu

  I mean, with the first right click on the menu bar that appears to address do not allow me to copy the link directly, you must click another area and then click again with the right mouse button in the address bar to copy the Internet address (happens to all pages)

  I tried to open Firefox plugins and completed inactive and reset Firefox on first use (as the first installation) and the problem is here again... The problem with or without add-ins and plugins is here

  What happens before and then when I format my computer

  Here I put a screenshot that explains the problem better than my words
  http://i.imgur.com/QxKd8P1.gif

  I hope you can help me

  Hello

  I want to just inform you that with the new version 36 of Firefox, this problem has been corrected in my browser
  Now I can access the copy option in the context menu directly in the address bar
  Thanks for the replies

• Will be performing tasks VISA with a data acquisition (Dev1) in a VI block tasks with the second DAQ (Dev2) VISA in a second VI?

  Hi all

  I have two functional screw a loop a set of read and write tasks with device 1 (NI USB-6008).  The second loop a set of writing with device 2 (another NI USB-6008) tasks.  2 VI has a massively slower than VI 1 time scale, which means that it must run in a separate loop.  Otherwise, VI 2 was created by copying and modifying 1 VI and variable names actions with him (though not, for example, global variables).  The two screws are meant to run at the same time on the same PC.

  However, if VI 1 is running at the same time as VI 2, any read operations or in writing to 1 VI 1 device are executed - but the VISA read and write operations to a serial device work.  When VI 2, all VI 1 functions work fine.

  Although I configured channels for tasks using the GUI DAQmx, I execute tasks using reading DAQmx write commands and have correctly defined the task 'create' and 'stop the task' live out the beginning and the end of my loop, respectively.

  Does anyone have suggestions for what could be the cause?  My thoughts so far:

  a. maybe it's some conflicts in the names of variables in memory between the two screws?

  b. LabVIEW for some reason any cannot read and write two devices on two separate screws?

  should c. I avoid to use DAQmx to configure these tasks (a sort of memory)?

  I know I can make it work if I have all together in a single massive VI, but for my application, it is much easier and better to do them in two separate screws.

  Thank you in advance for your help!

  In case anyone wondered, I found the solution:

  When I copied the original code for a new VI, it turns out that the structures of loop timed in the new VI had the same object name in the delivery structure of LabVIEW as timed in the original VI loop structures.  This prevents effectively regardless of the VI was executed the second execution of the timed loop.  (The serial number read/write suite to work because he was in a different timed loop.)

  I found this error when I ran the VI in execution of highlight mode and noticed that the output of 'error' on the timed loop flashed.  When I plugged it on my error stream, I found error-808, which explains the above problem.

  I have it set by right-clicking on the timed loop, change to a while loop, then change to a timed loop and plug the broken wires.  LabVIEW gave the new timed loop object a new name, and all was well in the universe.

• HP 15-r011dx noteboo9: no audio when with the second monitor attached and Extend mode, duplicate or second screen only

  When I attached a second monitor via a HDMI cable and try to use the duplicate, extend or second screen display modes only, I can get the video to view and run but I get no audio unless I put the laptop display settings to p / only mode.  I really want to use the second screen for PowerPoint/Presenter and play a video (with sound).  Even if I try to play a video on YouTube, I can't get audio only mode p / screen.  Any help would be greatly appreciated.  Thank you.

  Hello

  Please disable the HDMI to force audio to the laptop or use different such as VGA or DVI conection. To hell with its HDMI, please click right "speaker" icon > playback devices > right click and disable the HDMI sound.

  Kind regards.

• HPL2208w of the problems with the new laptop.

  Hello

  I have a 22-inch HPL2208w monitor, which seems to play on my new laptop Dell upward. The laptop has only a HDMI port, so I connect the monitor's vga cable to the Dell via an adapter.

  The display shows for a few minutes and requires only the range (I guess resolution) be changed to 1680 x 1650. For some reason I can't change the setting of the laptop to that. When I do not change the resolution (only if the monitor is unique and not dual output) the warning message remains on the screen and the screen is not at its best (wise clarity).

  Series Dell Win 7 64 bit, but the monitor was working on my previous Dell with the same version of Windows (with a VGA connection).

  Kind regards

  HA9005

  Hello HA9005,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with the resolution on the HP L2208w 22 '' monitor and a Dell laptop. Unfortunately, as the monitor don't has no options that you can change in what concerns the resolution (it is passed by the laptop), I suggest that you try the Dell Forums for an answer.

  I know maybe it's not the answer you are looking for, but at least you know where to look for the answer now. Thanks for posting on the HP Forums. Have a great day!