My printer which is connected to a home group to not communicate with the computer laptop and Netgear is not connected to my computer

Similar Questions

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Photosmart 6520: printer/scanner cannot communicate with the computer

  Attempt to analysis I get the message that the scanner cannot communicate with the computer. I found a 'solution' of Provost. followed the instructions, i.e. cleaned-uninstalled, downloaded the recommended download, but when I tried to install it I get the message: this volume does not meet the requirements for this update. So now I find myself with a softwareless and so unusable printer. Help, please. OS is Snow Leopard 10.6.8

  I messed around with it a bit nd git to work, finally. So startrekker, I give you a thumbsup kudos.

• Dell V313 printer cannot communicate with the computer

  When I try to print from my Acer Aspire Windows 7 on my dell v313, I get the message "communication not available - the printer cannot communicate with the computer. It's already happened, but when I restarted the computer it would print. Now, it won't. I replaced the USB cable and downloaded the last Cabinet V313 - and the software. Ink cartridges are filled. I am holder of a horse's hoof and a 4 leaf clover; but nothing works. What can I try now? Thanks for any help,

  Mike

  Mike,

  You can try to disable the ToolTips of printers. If the printer is wireless, try channel 11 in your wireless router. You can also try to remove computers printer scan list and then restart the computer and see if it prints.

  Start, Control Panel, devices and printer, your printer, printing preferences, advanced, more control options. Tell him to never show. The problem with this setting is that you can not tell if you are weak of ink, printer jams, etc..

  

  Rick

• I can't print anything; check wireless connections, etc. I get the message: Communication not available - not able to communicate with the computer-printer

  The printer is listed under devices.  Help

  Hello
  1. If it works well before?
  2 did you change on your computer before this problem?

  3. is the printer connected to a computer network?

  4. what operating system is installed on your computer?
  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
  5. how to connect the printer with your computer?

  You can follow the suggestions and see if it helps.
  Method 1
  You can run the printer troubleshooter.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  You can follow the procedure in the article.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  Note: The article is also applicable to Windows 7.
  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer
  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

• SE error message saying the printer cannot communicate with the computer cause of blocked files.

  Original title: DRIVER of PRINTER BLOCKED

  A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

  I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

  SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

  I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

  http://support.Microsoft.com/mats/printing_problems/

  If the problem is not resolved, contact Dell customer service.

• Trouble Shooting basic steps if the printer cannot communicate with the computer.

  Here are the steps to follow if your printer has problems to connect to a computer for basic troubleshooting.

  USB:

  1. Make sure that the USB cable is connected sucurely at both ends.
  2. Make sure that the USB cable is connected directly to your computer.  If you have a USB hub between the printer and the computer, it can cause communication problems.
  3. Make sure that your do not plug the USB key into a USB 3.0 port.  HP printers do not work with USB 3.0 connections and can prevent the computer to see the printer.
  4. Make sure that the USB cable is less than 6 ft.  No more 6 ' can generate signals lose who will cause problems of miscommunication.
  5. Have a backup USB cable.  The truth is USB cables are good markets for be sold at low prices.  Sometimes they last for years without any problem.  Sometimes they are bad when buy you them.  It's really just a matter of chance.  The chances of getting a bad store fees are quite low, but it happens and it never hurts to prepare.

  Wireless and Ethernet:

  1. Follow all the steps in this document.  Do step in the document will ensure that your printer on the network and has a stable connection.  The only thing to change is under the fifth step.  Under the fifth step, it tells you how to set DNS information on your printer.  It tells you to use the IP of your router.  Do not.  Use the public DNS to Google for favorite 8.8.8.8 and 8.8.4.4 for the alternate.  The reason why I use Google DNS is twofold.  (1) HP printers seem to connect better with Google DNS.  (2) If your printer has web services, web services have a better chance to connect with Google DNS.
  2. If your anti-virus software has a firewall, disable it.  Anti-virus firewall can block network communication between devices on the same network, and disabling the firewall may allow communication to flow normally.  If the firewall is the problem, there are ports you need to open once you activate the firewall again.  These ports will be listed at the end of this post.

  These are the basic things that you can do if you think you have problems with the printer and computer to communicate with one another.

  HP printer ports
  UDP	TCP	Acronym	Definition	Used for
  137	137	NetBIOS	Network Basic Input/Output System - (basic communication)	UDP: Card printing, Photo Upload
  138		NetBIOS	Network Basic Input/Output System - (basic communication)	UDP: Photo card download
  	139	NetBIOS	Network Basic Input/Output System - (basic communication)	TCP: PhotoCard Upload
  161		SNMP	Simple Network Management Protocol - monitoring network devices	UDP: print
  427	427	SLP	Service Location Protocol (know what things can do on the network)	UDP: Card printing, Photo Upload, scan, fax, Installation
  	9100	PDL	page description language - print control language (how the printed page you want to watch)	TCP: print
  	9220			TCP: Scanning, fax
  	9500			TCP: scanning

  I hope this helps.

• says printer can't communicate with the computer, but used to work

  also says: check the firewall settings to ensure dleacoms.exe is not blocked
  

  Hello

  In order to quickly provide a solution, please answer these questions:

  1. what version of Windows operating system is installed on the computer?

  2. What is the brand and model of the printer?

  3 did you do changes on the computer before the show?

  I suggest you follow the steps in the link to allow a program in the firewall.

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Note: By default, most programs are blocked by Windows Firewall in order to make your computer more secure. To work correctly, some programs may require you to allow them to communicate through the firewall. Before allowing a program make sure that you have got this information from a reliable source because it can affect the security of your computer.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Printer will not communicate with the computer.

  Original title: printer nocomunicate

  my printer Lexmark4200series Mod.x4270 and my compurete Compaq Presario5300no communicate

  Lexmark confirms that the version of your installed printer software is supported in IE9 (yet)?

• HP All in One printer will communicate with the computer.

  Original title: HP PHOTOSMART ALL IN ONE PRINTER C4480

  MY COMPUTOR KEEPS TELLING ME IT IS THERE HAS NO COMMUNICATION WITH MY PRINTER, I TRIED TO DOWNLOAD AND INSTALL FROM THE NETWORK DRIVER INSTRUCTIONS TO FIX THIS PROBLEM WITH NO NO SUCSESS I SHOULD THROW THIS PRINTER AND BUY ANOTHER

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the exact error message that you receive?

  I suggest that you follow the steps in the link and check if that helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also check: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-C4480-All-in-One-gives-error-from-HP-Solution/td-p/105711

  Printing problems? Try the HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&DLC=en&LC=en&product=3418705

• printer not communicating is not with the computer

  I have v310w dell printer and it does not communicate with the computer that is running windows 7

  Make sure that the printer is turned

  Disconnect & reconnect the printers power cable

  Disconnect & reconnect the cable USB or network

  Check your firewall settings to ensure the communication of the printer is not blocked

  Restart your computer

• Printer/scanner and CD/DVD drive do not communicate with my computer.

  My printer/scanner and CD/DVD drive do not communicate with the computer.  A message reads: command line compiler Visual c# has stopped working. All the drivers for my devices are updated and current. Exclamation points are noted in these devices in Device Manager. This seems to be a registry or a motherboard problem. While in the Device Manager, I clicked and uninstalled devices and then restarted the computer, hoping that the pilots would be automatically reinstalled correctly. It did not work, and nothing has changed. I've never had a problem like this before. Any suggestions?

  Problem has been resolved by removing the UpperFilters registry key.  Both the old and new readers are working properly. Thanks for the help and time.

  Ed

• Aspire laptop will not connect to the wireless printer, he said: he can't communicate with the printer

  I have a laptop sucks and when we first put in place it would print to the printer wireless, but now he says that he cannot communicate with the printer. I know just enough to get me in trouble with computers. Any suggestions?

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. which version of the Windows operating system is installed in the computer?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you use Windows 7, then I suggest you to go through the steps in the link and check.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.