Similar Questions

• With the help of an old sim card in the iPhone?

  I finally convinced my MOM to get an iPhone.

  Here, is the fun part. It is 1200 miles away so I can't be there to help him with this. She lives in an abdelkader * town so not Apple store or engineering support. I do this anywhere in the phone. She bought a reconditioned 5 or 6 for storage AT & T probably will not be that useful.

  It is on AT & T. I'm on Verizon. His current phone is so old that she cannot yet use AT & T cloud backup. It's something Huawei. It has a sim card. My phone does not have a sim card, so I'm flying blind on this one.

  My questions are these. It is theoretically possible for her to use the old phone sim card in an iPhone? I need to identify the card for me, I know. It seems that if it's an AT & T card, it should work.

  Is this what is causing problems for her? She wants to use the card so that it will not lose its photos and will not have to enter all its numbers again. Once the info is in the iPhone, I'll put it up with iCloud so that she should not rely on the map.

  If she can not use the old sim card, what is the best way to get the data of the card and on the phone? It has a Dell laptop. I have not persuaded to get a Macbook yet. I read that I can get a converter any for the card to be used with a USB port. Would it not easier to import the data on his laptop computer, and then in iCloud? Then once she has the iPhone, hover over the address? I'm assuming the pictures import as jpg files. Does anyone know how to import the addresses? I Team Viewer if I can take her cell phone if I need to.

  My other thought is to try to connect his phone to his laptop computer. I'm not sure she can find a cable with USB on one side and everything that will connect on the phone on the other. I'm not sure that it will work at all, but I think it's worth it.

  Ideas, tips or tricks to help me help my mother would be greatly appreciated.

  Where exactly she buys this iPhone "reconditioned"? Apple does not sell reconditioned iPhones and if it has been refurbished by a 3rd party, he will be untouchable as far as Apple is concerned.

  That said, if it is AT & T, she can get an AT & T Nano from AT & T SIM. They charge him for it. Her old SIM does not fit into a new iPhone. Heck, he probably does not take in an old iPhone unless you want to track an iPhone to original iPhone 3G or 3GS, which are obsolete.

  Get photos off the old phone is based entirely on what type of phone is and what kind of data transfer utility (and special cables) are available. If fact, she buys a new iPhone, someone at the AT & T store can help with this and contact transfer.

• I can't install 64-bit Windows Vista with the help of an old license of a dead computer?

  Old license Windows Vista on the new computer

  I have a Windows Vista Ultimate license that came with my 32-bit laptop and I have a new 64 bit laptop. Can I install Windows Vista 64-bit using the old license? I already threw the old laptop, and so I won't use the license in addition to a laptop computer.

  You can tranfer commercial versions, but not the OEM versions. An OEM version is only intended to be used on the computer that it is installed first. It is likely that the old license is an OEM version.

• With the help of DirectX 11 with older hardware

  Hello, I have a question about DirectX 11. I have a graphics card that is designed for DirectX 9, I was wondering if DirectX 11 will work at all with my card. From my understanding, fine, but not with the new advanced features that would have a DirectX 11 compatible card. Is this correct? Would be using DirectX 11 with a so-called "not compatible" graphics card slow down performance? Thanks for the info, XPAero

  Features of DirectX 11 works on a DirectX 11 compatible card. But you can use your DirectX 9 card anyway. DX11 is hardware compatible DX9. Although you may miss DX11 performance improvements is to wait. a downturn with the help of an old card, however, would be surprising (not to get improvements is not the same as obtaining a downturn). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Thank you!

  File-> open recent. Lists the catalogs you have opened and will allow you to choose one of the previous catalogues.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  You can just copy/paste the enchilada itself on another page, pretty easy!

  If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.