With the help of old gear series noon on El Capitan

Similar Questions

• With the help of old Windows CD to install the optional component deleted Outlook Express and I need to get it back!

  We have received a Windows XP laptop from a friend and use Outlook Express for e-mail. We had a number of other things such as pilots with the laptop but not the Windows CD.  Then we wanted to reduce the size of a jpg image and I wanted to use MS Photo Editor to do what I then read on the Microsoft site that I could get by installing from any Windows CD.  Therefore, I used an old Windows XP CD from another PC, choose to install an optional component and chose as accessories to the next screen, ensure that all other options were struck down, assuming that so they would simply not be installed.  One of them was Outlook Express and Internet Explorer.  Instead of THIS the wizard DELETED Outlook Express and Internet Explorer.  When I tried to get him back by checking these options, asked me for the 2nd day of the original installation CD - which of course, I did not!  I have managed to re - download IE8 from Microsoft Download site, but of course do that for Outlook Express - and we don't have Office on this computer: (.)  Help!  (a) is it possible to reverse this process to remove/uninstall Outlook Express? (b) we now lost all our emails? (c) I already tried to go back to a previous good configuration, but that has not worked.

  Thank you in advance for advice, answers or help.

  First, make sure that OE has actually disappeared.  Go to start | Run and paste this and see if OE starts:

  "c:\program files\Outlook Express\msimn.exe".

  Including the quotes and see if OE starts.  Very often "withdrawal" OE removes just the shortcut to it.

  If this does not work, you can try reinstalling XP SP3 (http://windows.microsoft.com/en-US/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3), but you should probably uninstall IE8 first and then reinstall it later.

  You can also go to the c:\windows\inf directory and locate the msoe5.inf file and right-click on it and choose Install and see if that fixes things.

  See if that works.

  Steve

• With the help of old VI´s in newer versions

  Hello

  I have a few old VI´s. They are written with LabView 5.0, on our system running LabView 8.6 and it is possible to open the old VI´s isn´t.

  Is there possibility to rebuild the old VI´s? And if it is possible how can I convert the old VI´s in the most recent.

  THX

  Post here. Someone will convert it for you

  [Edit: or there are discussions for the conversion of 5.0 to 8.x. Post here, so that will bring together similar requests in one place.]

• With the help of old computers

  I recently purchased 3 computers with OS 8.1 Windows and MS Office 365 to replace my computers in 2005, which took place from the XP operating system.  My old computer still works well, but they are not all the material was updated to use the Windows 8 operating system.  So I want to disconnect them from the internet and use it only for writing files and financial records.  I have the original CD until Service Pack 3 installation. So I want to re - install the operating system to get rid of old programs I need is no longer.  My question is how to do it of updates from Microsoft, I need to re - install for OS the most reliable and effective, in my opinion, there are several updates only slow down the operating system and are not necessary if the machine is not connected to the Internet?  Your contribution to this issue would be appreciated thanks.

  Installation of updates does not cause all more or less the programs to run. Only, it updates the logic that a running program would use if he had ever run.  It is never good to ignore updates, even those that you may not think are associated with online components, because the system uses still common components for video rendering, audio, PDF, print, graphic display and processing files of... this. Updates are also cumulative and build with each other. Any particular update is assuming that all previous ones have been applied. Having gaps in these can be an attack vector important feat. As much as you are using Windows XP, I recommend to get fully updated running a good antivirus that has a subscription of active update (if required for updates) and using a non administrator account for daily use. In this way any attack that never happens to compromise your profile can take administrative measures.

• With the help of old Windows 2000 laptop. Some of the keys by typing numbers instead of letters

  Original title: Sub-cles in Windows 2000

  I have reactivated a portable windows 2000 pro. I find that some of the keys produce a number rather than the letter, as 6 instead of o. That's if for a long time that I have used W 2000 I forgot how to reset the keyboard to letters only.

  In fact, this is not a function of Windows (2000 or another). It is a function of material of your laptop that remaps several keys to duplicate a NUMPAD on a smaller keyboard. In general, the feature is enabled or disabled with a Fn + NumLck key combination or (more rarely) a button dedicated to the NumLck .

  Not knowing the make/model of your real hardware makes it difficult to be more specific.

• With the help of old Signature with BB10 keys

  Hello

  I used to develop applications for the former BB OS (for example OS 7). Can I use old signing keys to sign BB10 apps?

  If the answer is Yes, where can I find my .csj files?

  If the answer is no, and I need to request new keys, I still be able to use the old Signature keys to develop applications for the former BB OS?

  Thank you!

  Just to clarify, you cannot use your current for BB10 keys, if you need to request new keys.  In fact, the signing process is completely different.

  When you ask for the keys, you can ask BB10 keys, keys BBOS or both, it's your choice.

  I'm sorry, this link missed my last post.  If all goes well he will provide details too:

  https://www.BlackBerry.com/SignedKeys/Codesigning.html

• Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Thank you!

  File-> open recent. Lists the catalogs you have opened and will allow you to choose one of the previous catalogues.

• With the help of DirectX 11 with older hardware

  Hello, I have a question about DirectX 11. I have a graphics card that is designed for DirectX 9, I was wondering if DirectX 11 will work at all with my card. From my understanding, fine, but not with the new advanced features that would have a DirectX 11 compatible card. Is this correct? Would be using DirectX 11 with a so-called "not compatible" graphics card slow down performance? Thanks for the info, XPAero

  Features of DirectX 11 works on a DirectX 11 compatible card. But you can use your DirectX 9 card anyway. DX11 is hardware compatible DX9. Although you may miss DX11 performance improvements is to wait. a downturn with the help of an old card, however, would be surprising (not to get improvements is not the same as obtaining a downturn). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  You can just copy/paste the enchilada itself on another page, pretty easy!

  If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.