With the help of QuickBooks 2011 and having installation problems.

After working for 3 hours was advised to run sfc/scannow. Same message re:cbs.log-> corrupted files found but impossible to access and read the CBS.log newspaper

Looks like your system is quite incoherent - and given the details to date...

Backup your stuff (anything you want to keep/need to keep) and all have the installation media you'll need * loan * and restore to the factory settings. Then update Windows Vista with the latest service pack. Then update the drivers of the hardware device to the manufacturers of your hardware. Then install your software. Then all the other updates.

Tags: Windows

Similar Questions

EXTRACT DATES WITH THE HELP OF TWO DATES AND THE BOX

Hello

I HAVE 2 DATE PICKER ITEMS
: P1_ARRIVAL_DATE AND: P1_DEPARTURE_DATE

AND I HAVE 7 ITEMS in BOXES DAY it return values are 'Y '.

: P1_MON
: P1_TUE
: P1_WED
: P1_THU
: P1_FRI
: P1_SAT
: P1_SUN

as I choose date: P1_ARRIVAL_DATE AND: P1_DEPARTURE_DATE
AND THE DAY, AS: P1_MON, ONLY THE DATES HAVE TO RETURN WHO HAVE MONDAY AS DAY BETWEEN: P1_ARRIVAL_DATE AND: P1_DEPARTURE_DATE.

FOR EXAMPLE IF I CHOOSE THE DATE: P1_ARRIVAL_DATE AS 07_NOV_2011 AND: P1_DEPARTUE_DATE AS: P22_NOV_2011 AND IT HAS 3 MONDAY BETWEEN THESE DATES
RESULT SHOULD BE DISPLAY AS
======================================

 ARRIVAL DATE-------ARRIVAL DATE+6
============================
 07_NOV_2011 ---     13_NOV_2011       // THESE ARE MONDAY DATES
14_NOV_2011 ---     20_NOV_2011     
21_NOV_2011 --      28_NOV_2011

CAN I CHOOSE MORE THAN ONE CHECK BOX AT THE SAME TIME
FOR EXAMPLE IF I CHOOSE: P1_MON AND: P1_TUE, THE RESULT SHOULD BE

ARRIVAL DATE-------ARRIVAL DATE+6
============================
 07_NOV_2011 ---     13_NOV_2011   
 08_NOV_2011 ---     14_NOV_2011      
14_NOV_2011 ---     20_NOV_2011      // MONDAY AND TUESDAY DATES
15_NOV_2011 ---     21_NOV_2011  
21_NOV_2011 --      27_NOV_2011
22_NOV_2011 ---     28_NOV_2011

HOW CAN I DO THIS? PLEASE HELP SOLVE THE PROBLEM.

THANKS and GREETINGS
CORINE

X the problem you see is a misunderstanding on my part about what is the date of arrival date of departure... it's inverse reasoning: at your arrival is before departure (and I got it on the other hand, the departure before arrival (:-))

But there is also a flaw in the code (instead of the Date of arrival by using the select sysdate).

Please run the code like this:

with dates as
(select to_date(:P1_ARRIVAL_DATE,'DD-MON-YYYY')+level-1 as day from dual
 connect by level <= to_date(:P1_DEPARTURE_DATE,'DD-MON-YYYY') - to_date(:P1_ARRIVAL_DATE,'DD-MON-YYYY')  +1
 )
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Mon' and :P1_MON = 'Y'
union
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Tue' and :P1_TUE = 'Y'
union
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Wed' and :P1_WED = 'Y'
union
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Thu' and :P1_THU = 'Y'
union
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Fri' and :P1_FRI = 'Y'
union
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Sat' and :P1_SAT = 'Y'
union
select day, to_char(day,'Dy') from dates
where to_char(day,'Dy') = 'Sun' and :P1_SUN = 'Y'

for the period from 01 to 15 November 2011, with P1_TUE and P1_FRI, flag in there, I got this result:

DAY      TO_CHAR(DAY,'DY')
11/01/2011     Tue
11/04/2011     Fri
11/08/2011     Tue
11/11/2011     Fri
11/15/2011     Tue

To simplify (can only test inside the apex report, could not run code in SQL Wkshop):

with dates as
(select to_date(:P1_ARRIVAL_DATE,'DD-MON-YYYY')+level-1 as day from dual
 connect by level <= to_date(:P1_DEPARTURE_DATE,'DD-MON-YYYY') - to_date(:P1_ARRIVAL_DATE,'DD-MON-YYYY') +1
 )
select day, to_char(day,'Dy') from dates
where v('P1_'||to_char(day,'DY')) = 'Y'

Published by: Kléber M on November 14, 2011 05:06

With the help of several classes and create an object of a class and calling its method in a different class.

Creating a new class, I need to move my main method class SaveDate DynamicTest class. Below I've listed the code of both classes. The goal is to be able to run my class DynamicTest program. I need help to understand the process of moving my main method of a different class and creating an object of a class and calling its method.
public class {SaveData
private public static final map < String, Object > myCachedTreeMap = new TreeMap < String, Object > ();
public static final List < String > getLines (final String resourceParam, final Charset charset) throws IOException {}
System.out.println ("please:" + resourceParam);
If {(myCachedTreeMap.containsKey (resourceParam))
Use the file cached, to avoid a further reading.
System.out.println ("found in memory:" + resourceParam);
}
else {}
Load the file from the disk
System.out.println ("found in memory:" + resourceParam);
}
Returns a null value.
}
Public Shared Sub main (String [] args) throws IOException {}
String target_dir = "C:\\myfiles\\config\\en";
Line = "C:\\myfiles\\config\\en\\output.txt";
File dir = new File (target_dir);
File files [] = dir.listFiles ();
If (file == null: files.length < 1) {}
System.out.println ("file list is empty...");
return;
}
Open the Printwriter
PrintWriter OutputStream = new PrintWriter (output);
try {}
for (textFile file: files) {}
If (textFile.isFile () & & textFile.getName () .endsWith (".txt")) {}
readFromDisk (textFile);
}
}
}
{Finally
outputStream.close ();
}
String fileNameFromCache = "en_synonyms.txt";
Sheet1 = myCachedTreeMap.get (fileNameFromCache) object;
System.out.println (fileNameFromCache + ": \n" + "Sheet1");
}
@SuppressWarnings ("resource")
private static Sub readFromDisk(File textFile) throws FileNotFoundException, IOException {}
BufferedReader InputStream;
inputStream = null;
String content = "";
try {}
inputStream = new BufferedReader (new FileReader (textFile));
content = readFile (textFile);
System.out.println ("bytes read =" + content.length ());
Save the content
FileContentsObject Sheet1 = new FileContentsObject (System.currentTimeMillis (),
textFile.lastModified (), content,
textFile.getName (),
getLines (null, null));
Add to the map
myCachedTreeMap.put (textFile.getName (), Sheet1);
}
{Finally
If (inputStream! = null) {}
inputStream.close ();
}
}
}
private static String readFile(File f) throws FileNotFoundException, IOException, UnsupportedEncodingException {}
Text of StringBuilder = new StringBuilder (1024);
read int, N = 1024 * 1024;
char [] buffer = new char [N];
BufferedReader br = null;
try {}
BR = new BufferedReader)
(new) InputStreamReader
(new FileInputStream (f), 'UTF8'));
While (true) {}
read = br.read (buffer, 0, N);
If (read > 0)
Text.Append (new String (buffer, 0, read));
if(Read < N) {}
break;
}
}
}
{Finally
If (br! = null)
Br. Close();
}
Return text.toString ();
}
private static final class FileContentsObject {}
private long cachedTime; currentTime
private long lastModifiedTimestamp;
private string content
List < String > lines;
private String fileName;
public FileContentsObject (long cachedTime, long lastModifiedTimestamp,
Content string, String fileName, List < String > lines) {}
this.cachedTime = cachedTime;
this.lastModifiedTimestamp = lastModifiedTimestamp;
This.contents = content;
this.fileName = filename;
This.Lines = lines;
SimpleDateFormat sdf = new SimpleDateFormat ("MM/dd/yy hh: mm :"); ")
System.out.println ("time & Date:" + sdf.format (cachedTime));
System.out.println ("' last modification timestamp:" ")
+ sdf.format (lastModifiedTimestamp));
}
/**
*
* @return the lines of the file
*/
List < String > getLines() {}
Return this.lines;
}
public String toString() {}
"return"Sheet1 {}"+" fileName =' ' + filename + '------"+", content = "" "
+ content + "\"+ ", lastModifiedTimestamp ="
+ lastModifiedTimestamp + ', CurrentTime & Date ='
{+ cachedTime + '}';
}
}
}
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
public class DynamicTest {}
Public Shared Sub main (String [] args) {}
Game characters charset = Charset.forName("UTF-8");
try {}
List < String > = CacheData.getLines lines ("en_synonyms", character set);
If (rows! = null) {}
System.out.println ("number of rows:" + lines.size ());
for {(String ligne: lines)}
System.out.println ("DynamicTest:" + line);
}
}
} catch (IOException e) {}
e.printStackTrace ();
}
try {}
List < String > = CacheData.getLines lines ("en_stopwords", character set);
If (rows! = null) {}
System.out.println ("number of rows:" + lines.size ());
for {(String ligne: lines)}
System.out.println ("DynamicTest:" + line);
}
}
} catch (IOException e) {}
e.printStackTrace ();
}
}
}

I have read and watched videos about the creation of an object of a class and calling its method in a different class. I'm still confused on how to do it properly. By using the code below if someone can explain how to properly call the method of objects from my hand.

Huh? You have NOT posted any 'hand' or any 'method of objects '.

If you need help with the code, you need to view the code.

The Java tutorials has dozens of trails "Classes and objects": what they are, how to create and how to use them.

https://docs.Oracle.com/javase/tutorial/Java/javaOO/classes.html

1. create an instance of a class

2. call to one or more of the public methods of this class

If the class has public static methods, you don't need to create an instance first.

I suggest that you work your way through these tutorials. They include the WORKING example code.

With the help of RIGHT, LEFT and replace it and get really strange results! Help!

Hi all -
I need help with this one. I am writing a script that analyzes the header and the footer of a HTML document saved well enough, so I have only the middle of it (this is a quote from folder) and then re-recorded it in a new file. The header parsing (left) works perfectly, but when I get to the foot of the page (to the right), it rips everything except the header for some reason any! So I end up getting a file that is more or less the header and the footer, but not meat the citation record.
Here is my code:
<! - read file - >
< cffile action = "read" line = "" #filestoragelocation #/ #cffile.serverFile # "variable ="quotecontent">"
 write file
< cffile action = "Write" line = "" #filestoragelocation # / m #cffile.serverFile # "output =" #quoteedit #">"
Pretty much what I've done with BannerOld and OldFooter is a tag in the code that is in the document once (with the banner, its an image, with the footer, text ("the terms of the CO")... and hypothetically, to the left, I should be selecting the banner image and its replacement) , and entitled, I should be select all after the text and its replacement.
For some reason, instead, I just get the new banner and footer in the final document. If I remove the code to the footer, it works perfectly (with, of course, the old foot to still be here).
I'll probably just have some silent monitoring here... but little help would be amazing. Thanks as always guys!
I

You say that the first part works so I'll take your Word for that, although it does not look good.

The second need party probably does not work because youre calculate the right of X characters, but you count tanks by finding the index of your discovery early on. So imagine you replace the first 10 characters of your new head. Your doc is total 100 characters. You want to replace the last 10 characters. Your search returned 90 because you started from the beginning. You take the right 90 tanks, taking you at the end of the header, and you replace it with the footer.

What you want is replace (quoteedit, RIGHT (quoteedit,Len (quoteedit)- find (oldfooter, quoteedit)), newfooter). It should work.

With the help of linux deepin and Thunderbird does not pick up time correct system.

The system time is set correctly for my time zone, but it turns out that no matter what I put the time system; Thunderbird ignores and default time is GMT. I am fully updated both deepin and Thunderbird.

that shows the TZ environment variable you Linux distro?

With the help of a page and write to two tables?
Request Express 3.1.0.00.32

I have 2 pages each point at their own separate table. All things considered, the two pages can be combined into a single, but the structure of the table must remain intact.

I copied the region of page 2 on page 1, them flowing properly so that the user does not have a problem, enter the information in the form.

However I'm unable to have the information entered to engage in two different tables.

All the information in table 1 (page 1) will save however will not be the information in the region on the page 2 (table 2). I've referenced the source as the page element (P3_EMP_ID), as well as the name of table.column and have had no luck.

Is this possible and how?
Hi Leland,

You should look into the clause of the insert statement VOTE: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9014.htm#i2171131

Or, on a line of the XXX process on a form, you also have a key to return to the setting of the article - if you have this process, you can enter P23_PK_PROJ_MASTER_ID
in there.

Andy

Foxit Reader does not work with the help of laptop HP and support Guides, suggestions?

New HP Pavilion with Windows 7 x 64 I downloaded Foxit Reader and installed and then uninstalled Adobe Reader to save space. Then, although it will open my PDF in 'My Documents', it will not open the Guides or learning PDF in HP help and Support files. Is there someone with more experience to use Foxit Reader that may suggest a work around? If I reinstall Adobe PDF then everything works again.
John

http://www.foxitsoftware.com/support/

help I INSTALLED WINDOWS 7 32 BIT on a DELL MINI WITH the help of 7 GB AND IT has TAKEN ALL the DISK SPACE

I installed WINDOWS & HOME PREMIUM 32 BIT on MINI DELL A WITH 7 GB OF DATA AND IT has TAKEN ALL the DISK SPACE. I HAVE A SEAGATE 90 GB USB DRIVE BUT CANT PUT ANY can I FILE ON IT help

Windows 7 requires 8 to 10 GB of disk space, the larger page file. Cannot move files off Windows storage on the site. Try the release of disk space by using the following:

Strategies to free disk space - Windows - Microsoft

Try to send the word and received this error msg. With the help of widows 8 and Word 2013. Also using Windows Live Mail to my gmail account. How to set the default value? Thank you!

error: there is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel

On Saturday, May 30, 2015 15:23:22 + 0000, sherylc_822 wrote:

Well, I found this region earlier but am not sure what file extension to select under associate a file Type or Protocol with a specific program (selection which I believe I should open default programs). Can you help me? Thank you.

On the control panel. Default programs screen, choose ' define your ".
default programs". Scroll down to Windows Live Mail, click it, and then
Click on "Set this program as default."

With the help of Master pages and blocks of text

Hello
I created a text frame on a master page and you have specified a style
Can I add my custom text on the text block by pressing ctrl + Maj + text block.
If I change the style, it applies to all pages. But if I move or resize the text block on the page master it does not apply to all pages because it has become its own layer on this page.
What do you do before you can change the text block and the master page and still be able to add your own content in pages that depend on the master page.
Thanks a lot for your help

Why do you need to replace the title of the page?

Use either a text variable, a section marker or create another master page based on this master page with a different text in the placeholder. Only the content will appear on the pages, everything else, like running headers or page numbers or artifacts have a place on the master page without replacing them.

When you later create accessible PDF or EPUB this difference is important. You can read high voice content in Acrobat for accessibility, that text on the page, not the master is used for this, and when you export an EPUB page only elements, not the master are included as it should.

If you need text to expand, when something changes, create your page with margins and borders that will help to make changes later.

With the help of TransformGestureEvent.GESTURE_SWIPE and TOUCH_TAP

Hello
I'm trying to create a slide in as3 for mobile with a different Touch events, but my experience does not allow me to finalize the script.
This is a slide that moves from left to right and I would like to redirect on a picture of the scenario when TOUCH_TAPE or click

Can you help me

My script
Multitouch.inputMode = MultitouchInputMode.GESTURE;
var currentGalleryItem:Number = 1;
var totalGalleryItems:Number = 4;
stage.addEventListener (TransformGestureEvent.GESTURE_SWIPE, fl_SwipeToGoToNextPreviousFrame);
function fl_SwipeToGoToNextPreviousFrame(event:TransformGestureEvent):void
{
if(Event.OffsetX == 1)
{
If (currentGalleryItem > 1) {}
-currentGalleryItem;
slideRight();
}
}
ElseIf (event.offsetX == - 1).
{
if(currentGalleryItem < totalGalleryItems) {}
currentGalleryItem ++;
slideLeft();
}
}
}
var slideCounter:Number = 0;
function slideLeft() {}
gallery_items.addEventListener ("enterFrame", moveGalleryLeft);
}
function slideRight() {}
gallery_items.addEventListener ("enterFrame", moveGalleryRight);
}
function moveGalleryLeft(evt:Event) {}
gallery_items.x = 48;
slideCounter ++;
if(slideCounter == 10) {}
gallery_items. RemoveEventListener ("enterFrame", moveGalleryLeft);
slideCounter = 0;
}
}
function moveGalleryRight(evt:Event) {}
gallery_items.x += 48;
slideCounter ++;
if(slideCounter == 10) {}
gallery_items. RemoveEventListener ("enterFrame", moveGalleryRight);
slideCounter = 0;
}
}
Stop();

Thank you

Thank you for all

I appreciate your help

Sincerlly

With the help of text boxes and radio buttons

Hello!
I tried to make a small Manager application where the user writes his name is on a TextBox and selects her sex between the two options in radio buttons (female or male). These information apears inside a text on another screen. I tried desperately to organize the code to make this work, but I haven´t successful. Anyone of you Director community could help me with this give me an idea of how do to solve this problem?
Thank you very much!!!
Philippa

I have downloaded a file that shows what you are trying to do - feel free to use all or part of it. Sorry, but I was not taking the time to comment the code for you - if you have any questions, ask at your

Why isn't my Thunderbird allows me to go to my web browser (Google) from a link in a message? With the help of Windows XP and the Google browser

For the last two day I did not got to the Thunderbird links to my web browser. I use the Google browser, it's with all my e-mail providers, Google, Yahoo and Windstream. I don't know when the update has been installed.

https://support.Mozilla.org/en-us/KB/hyperlinks-in-messages-not-working

With the help of Lego sensors and motors through the LabVIEW and NI PCI card

I want to connect a card PCI NI Lego motors and sensors and drive motors and the data of sense using LabView. What card PCI can I use? Thanks for a great site and fantastic community online.

Hi Tom,

Looks like a great app. NXT with LabVIEW Migration will be a big intermediate step before joining more industrial and better sensors with a PCI, PXI, cDAQ or cRIO. We have a lot of options when it comes to vision and control and acquisition of movement, and we have dedicated forums for all of these products as well.

Machine vision: http://forums.ni.com/t5/Machine-Vision/bd-p/200

Motor control and motor control: http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/bd-p/240

Programming LEGO Mindstorms LabVIEW Guide: http://digital.ni.com/manuals.nsf/websearch/93B7EC451C8DEEC68625762B005380FE

Getting started with LEGO Mindstorms: http://digital.ni.com/manuals.nsf/websearch/80456522F9BE87FB8625746400540977

Good luck

My audio stutters constantly during playback of dvd, but not on the timeline. With the help of computer GOV and exporting to Quicktime. Need help

Can someone help me? My unit set up a video memorial to a deceased soldier. The audio and video play fine on the timeline, but when the rendered and serious on a DVD-audio stutters constantly. My soldier exports to QuickTime using a GOV'T computer.

You need to export from Premiere Pro using predefine the MPEG2-DVD and import the TWO files (audio and video) in yet for the creation of

When you export the body using any other codec, you have created a layer of compression... and since then still must re - encode the video to make it legal for a DVD, you just create a 2nd layer of compression

CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

With the help of QuickBooks 2011 and having installation problems.

Similar Questions

Maybe you are looking for