My audio stutters constantly during playback of dvd, but not on the timeline. With the help of computer GOV and exporting to Quicktime. Need help

Similar Questions

• Satellite P100-188: his stuttering & distortion during playback of DVD and CD

  Hello

  My laptop has developed for the second time, what I can only describe as "stuttering and distorting" during playback of dvd and cd try to burn or rip a cd does not work either.

  The first time this has happened was a few months ago and PC World did a reinstall of windows that solved the problem. It is now again.

  Any help would be much appreciated.

  and why you n t try to reinstall the OS again?
  Seems to some operating system files or registry entries are corrupted.

• I can listen to music when I play the DVD, but not what the people say.

  I'm running an Inspiron 1525 with Vista. When I put the DVD to play in Windows Media Player, I can hear the music on the DVD, but nothing that people say. I tried to plug in headphones and readjust the speakers, but I can still hear nothing but the music. This happens on every DVD, but I have no problem with the CD.

  Thank you

  Kathleen

  Hi Kathleen,.

  I suggest you try the following steps:

  Step 1: Change the settings in Windows Media Player volume and control; Follow the steps mentioned in the link below

  Change-volume-settings-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-volume-settings-in-Windows-Media-Player

  Step 2: Check if you have all parameters related to playback of DVD in the software Sound\Audio that may have installed you.

  Step 3: check if you can play DVDs in Windows Media Center

  Play-a-CD-or-DVD-in-Windows-Media-Centre

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-a-CD-or-DVD-in-Windows-Media-Center

  Step 4: Check if the DVD work fine on another computer to eliminate any problems with the DVD itself.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have picture but no dsound during playback of dvd videos.have checked the computer volume levels in system tray - everything ok

  Help!

  Picture but no sound when playing dvd videos - have checked volume levels-all seem ok any ideas?

  Hi silverfox16,

  (1) is this problem limited to DVD videos?

  (2) you get an error message?

  (3) what is the file format of the video?

  (4) who application\player you use to play the video?

  Method 1:  Run the troubleshooter of reading, then check

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2: Download and install codecs, see the link below
  How can I find a codec?

  You can see the article below for file types that Windows Media Player supports

  Information about the media file types supported by Windows Media Player
  http://support.Microsoft.com/kb/316992

• No sound during playback of DVD in Windows Media Player

  1. No sound during playback of DVD in Windows Media Player.

  Media Center recently stopped working altogether, the message alleges a solution will be found, but he never comes to the top with one and there seems to be no resolution right ahead of internet, I can see others too have a similar problem.

  So I would try Media Player, no joy it is thinking.

  It reads the dvd no sound, I go into options and make sure the external emu sound card is set, yes all well, but as soon as I put it on youtube videos sound turns off by train to play media player so a sort of conflict, if I close Opera / chrome browser and reopen his is back.

  Update or reinstall the drivers for the sound card in Device Manager, checking the PC or Support Downloads Web page of the card for more recent or different driver.

  Physically, reinstall the sound card to make sure that the contacts and the slots are clean and tight connections.

  If you have an audio chip embedded, try to use it to compare.

  Try the VLC media player to see if it has the same problem.

  Have you updated flash player for your browser?

  Try another browser to compare.

  Establish a clean boot, check for infection and then run the System File Checker of the steps in troubleshooting for Windows 7

  For irreparable system files, run a repair facility.

  It's much lower plant?  If so Clean Up Factory Bloatware and consider to go from worst to best with...

  Maybe it's time for a clean reinstall Windows 7?  The steps in the link provide the best possible installation.

  Report on the results of other ideas.

• Windows Media Player Version 11 does not properly during playback of DVD

  Original title: Windows Media Player Version 11

  Windows Media Player has developed a jitter during playback of DVD, I have not modified parameters.

  Hello

  1. what exactly is the problem you are experiencing with Windows Media Player?
  2. you receive an error message?
  3. don't you make changes on the computer before the show?

  Method 1: Fix the term.

  Solve the problems of Windows Media Player video and other media or library:
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2: If the problem is not resolved, you can try the procedure in the below mentioned link and check if it helps.

  Read CDs and DVDs:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/play-CD-DVD

  Hope this information is useful.

• Windows Media Player-audio tracks overlap during playback

  Behavior of strage in WMP from the application of SP1 Win7

  Since the Windows 7 (32 bit premium) with SP1 upgrade, Windows MediaPlayer exposes a stange problem.  With WMP set to auto-repeat during playback, I double click an MP3 file from Windows Explorer.  WMP is launched and the MP3 starts playing.  Seconds from the end of the track, it seems that the track starts again, but then only the first instance of the track is still playing.  It's looks like I'm the same way playing on another media player and from reading about the second, just before the first finishes (so the end of the path of departure of caterpillars are bunk with each other).  Funny is when the trial ends, playback will be stopped all together, WMP that outputs a brief explosion of noise, and then the track starts again from the beginning.  If the track repeats once again, it does not repeat this behavior.  He manages at the end and restart normally. Did not have this before SP1 was applied.  I have a Sony VAIO VGNFZ21S's fully patched.  Thought you would like to know...

  Thanks for the tips.  Unfortunately, it did not apply to my laptop (no improvement is tab ' sounds / Speakers').

  Inspired by your advice however, I started to turn on & off Audio enhancements directly in WMP.  It seems that the fade function is causing my problem.  More I put it, the more noticeable the overlap between the beginning and the end of the track.  Turn off Cross Fade, solved the problem.

  As I said, this behavior has not happened before I applied the SP1, then maybe something related to WMP has been included with SP1 that revealed the problem.

  Once again, thank you for the reply.

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• A60: Work of the Audio Conference on laptop but not on the car radio CD/home

  Hello
  I tried a number of blank disc CD - R and CD - RW, but none of them work with record Sonic to burn music from an audio disc on a blank CD. Music plays on laptop, but not in the CD drive or the car home. Anyone know what the problem is. Really is tired of the use of different brands. nothing works!

  Hello

  You burned the CD and this CD works fine on your laptop, but it of not possible to play in the drive of the car and on your cd player. Is this good?
  Well, in this case there no problems with your laptop.
  I guess that the other players cannot read the CD because they don t supports the support or the audio file format.
  Which audio format you used and you burn music from the original CD?

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• Creation of DVD could not decode the files

  Hello world. Another new guy!

  I also discovered DVD Maker. But I had all the problems in sucsession. First creation of DVD does not recognize the files, but with the help, as I arrived here, I overcame. Then, he did not find the DVD burner, but you guys saved me once again on this one. Now, once I have start burning .avi on DVD, after 1% weird files, it gives me a biggie, saying that one or more of the files that have been added can not be decoded properly. I know there are other people who had simmular problems, but I'm still at a loss. I have download a codec (just the codecs) package to solve the original problem, I myself for example not recougnizing files in the first place. I thought that would be enough.

  Please someone save me! :-) . I'm SO close from there...

  Hello

  Method 1 : give the Movie Maker clearly run by temporarily disabling all startup programs and Services of third party (non-Microsoft).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Method 2 : try the system restore and the System File Checker program.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Method 3 : you can also install a codec pack and check if the problem is solved or not.

  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

  WARNING of THIRD PARTY SOFTWARE : Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also, check out the following links and see if the problem is resolved or not.

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  Do you have enough space on the DVD for the file, and you have the same amount of free space on the hard disk for the temporary work files (maybe even a little more)?

  This is a FAQ on the Codecs it's Vista related and interesting to read.

  Windows Vista codecs
  http://www.Windows-Vista-update.com/Windows_Vista_codecs.html

  Hope that helps.

• To play DVD but not CD

  I can play DVD but not CD, what's the problem?

  I can play DVD but not CD, what's the problem?

  ===============================================
  It looks like your optical drive may must be repaired or replaced.

• A VCR tape was copied on a DVD. Play on TV, but not on the computer. Can it be fixed?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  ==============================================
  Can successfully play you commercial DVDs on this computer?

  IF you go to... Start / computer... and left click of the drive letter
  the DVD player is he will play?

  Media Player freeware at the following address may be worth a try... it will be
  play anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

• I installed 4 times Photoshop elements 14 in french a dvd or an online version: the Organizer menu, but not of the editor is always in English: where is the problem?

  I installed 4 times Photoshop elements 14 in french a dvd or an online version: the Organizer menu, but not of the editor is always in English: where is the problem?

  Try this Photoshop Elements forum