With the help of trigger to copy lines without specifying the column names

Similar Questions

• Display of the results of the query with the column names unknown

  I use this code to grab the headers of columns in a select * statement. (I never know what table is queried out of 12 000 or more.) I want to make a loop on the column headers, then the query results in a web page table.
  
  < cfoutput >
  < cfset colHeaderNames = ArrayToList (recordset1.getColumnList ()) / >
  #colHeaderNames #.
  < / cfoutput >
  
  Is there a similar method or suggestions for the release of the results of the query - now that I know the column headings?

  If I understand correctly, you can do something like the code below.

• Anyway, to remove the column names in the result of the query of SQLPLUS

  Hello
  
  I am using sqlplus to run a script that returns results with the column names.
  
  Anyway is to omit the names of columns in the result of the sqlplus query?
  
  I would like to have only results with their column names in the output.
  
  Thanks in advance!

  Hello

  Maybe your LINES (IZE) is not defined?

  SCOTT>set lines 130
  SCOTT>select status, machine, module
    2    from v$session
    3   where upper(username) = 'SCOTT';
  
  STATUS   MACHINE                                                          MODULE
  -------- ---------------------------------------------------------------- ------------------------------------------------
  INACTIVE PFAE3\VPC4894-03                                                 TOAD 9.7.2.5
  ACTIVE   PFAE3\VPC4894-03                                                 SQL*Plus
  
  2 rows selected.
  
  SCOTT>
  

  As an alternative to the linesize parameter, you can format the columns:

  SCOTT>set lines 80
  SCOTT>col status for a8
  SCOTT>col machine for a30
  SCOTT>col module for a30
  SCOTT>select status, machine, module
    2    from v$session
    3   where upper(username) = 'SCOTT';
  
  STATUS   MACHINE                        MODULE
  -------- ------------------------------ ------------------------------
  INACTIVE PFAE3\VPC4894-03               TOAD 9.7.2.5
  ACTIVE   PFAE3\VPC4894-03               SQL*Plus
  
  2 rows selected.
  
  SCOTT>
  

  Concerning
  Peter

• Rename the column name of the view

  Suppose I have an employee of the table with the column name. Now, I want to make a view of the employee to the table with the name of the First_name and Last_name column. Is this possible?

  You can also use aliases in the view definition:

  CREATE VIEW employee_view (
    first_name,
    last_name
  ) AS
    SELECT first,
           last
    FROM   employee;
  

  However, you can rename a column in a view. You would have to DROP and CREATE or to CREATE or REPLACE.

  Concerning
  Peter

• Help! Need a script to automatically open files with the same name but in another location.

  Good morning friends,

  So for my work, I need a script to open files with the same name but located in a different folder. But since I'm a total noob when it comes to programming, I can't understand how do. That's what I have in mind:

  -J' I manually open an image.

  -The script will look for a file with the same name in another folder that I've specified.

  -The script will then select the channel CMYK of the second file and copy and paste it into the first file.

  -The second file is then closed without saving the changes.

  I have problems with the part where the script searches for a file with the same name as the opened file. I would really appreciate help. Thanks in advance.

  If (app.documents.length > 0) {}

  myDocument var = app.activeDocument;

  var Nomdoc = myDocument.name;

  try {var basename = docName.match (/(.*)-.)} [ ^\.] +$/)[1]}

  catch (e) {var basename = thedoc.name};

  var path = / * path of folder to insert as a string here * / + ' / ' + base name + / * insert file extension, including the period as a string here * /;

  If (queue (path) .exists == true) {var otherDocument = app.open (File (path))};

  };

• DISABLE "there is already a file with the same name to this place.

  Window 7. 64 bit. How do you turn OFF DISABLE, CANCEL, DELETE, STOP the pop-up 'MOVE the FILE'?

  As a user since the days of DOS command lines and having had a routine all the way through to XP, this new window is one of the most annoying pop ups for an experienced user. If it isn't a swith toggle check box or an other power selection for this message, there must be. And if there is, you did it quite hard to find.

  The dialog box that appears in Windows 7 that starts with "there is already a file with the same name to this place. It lists then the three choices - "Copy and replace", "Do not copy" and "copy, but keep both files.

  I managed several libraries of forms which oblige me to replace the files throughout my day. I make a copy of the file I replace first of all, for archival purposes and this pop-up box is, well, it's boring. There must be a way to disable.

  This box comes up to move files and to copy the files.

  Any help in these turn off would be appreciated.

  See you soon.

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• How to register multiple files with the same name with different num revision

  Hello
  
  Can someone please tell me, how to register several different files with the same name with the revision number using the RIDC API.
  
  For example:
  First of all I will be saved in a file (TestFile.txt) in a content server with revision number 1 using the RIDC API in application of the ADF. Then after awhile, will change the same line (TestFile.txt) check-in and once again. I tried to check the same file several times, however first Check-in correctly in server showing revision 1, so that Check-in same file again, her gives no error message, and also its not reflecting only not to the server. Single file (TestFile.txt) reflecting on the server.
  
  How to implement this feature using the RIDC API? Any suggestions would be helpful.
  
  Concerning
  REDA
  
  Published by: 887680 on March 6, 2013 10:48

  (1) get the content ID (dDocName), call CHECKOUT_BY_NAME
  (2) call check-in service with dRevLabel = previous dRevlabel + 1

• OPW-00005: file with the same name exist - please delete or rename

  I deleted the password file and trying to create a new.
  But it gives me
  
  OPW-00005: file with the same name exist - please delete or rename
  
  But the file is physically not there.
  
  Help, please.
  
  Thank you

  864312 wrote:
  Thanks for the reply.

  It gives me always the same error.

  It's really, really, REALLY hard to solve a problem that can not be seen.
  use COPY it PASTE & so that we can see how & how Oracle responds.

• where to save the files under options the file name is duplicated how to remove an additional folder with the same name

  Under Options in Firefox, I clicked on save the files under downloads, but the file name twice and an additional file with the same name is created in the folder, i.e.:

  G:\Akbar's Songs\HAMARA DOWNLOADS\HAMARA FORUMS DOWNLOADS FORUMS

  As you can see the file repeats, how can I fix it?

  Also the music files, I download from a site of downloads as a WinRar file and I need to open it. Y at - it an option where the file opens automatically in the folder I chose?

  Thanks a lot for your help.

  Hi Akush, when you install 7 - zip, make itself the default application to open .zip and .rar files. So if you double click on the .rar file, it should open in 7 - zip. If you prefer to decompress immediately, right click the file and look for new 7 - zip items in the menu. I can't think of a way to do this automatically, however.

• How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  I find easier to use this copy separate Automator Service (download Dropbox).

  To install in your numbers > Services, double-click menu just the package downloaded .workflow and if necessary give permissions in system preferences > security & privacy.

  To use, just:

  1. Select the cells in the column with duplicate names.
  2. Choose separate copy in numbers > Services menu.
  3. Click once in the upper cell where you want the deduplicated values appear.
  4. Command-v to paste.

  SG

• [.ini files] Get the value of multiple labels with the same name

  Hello!

  In an ini.files, I need to get the value of each tag named in a certain way in a section, but unfortunately, I have 3 or 4 tags with the same name in several sections. I don't know how to retrieve these values, the program always consider that the first tag and not others, I tried to remove each tag after obtaining its values, that he did not.

  Does anyone have an idea to solve the problem?

  Thank you!

  As you can read in my last post, you must read and throw 'x' lines:

  OpenFile)

  Skip lines

  for (i = 0; i< x;="" i++)="" readline="">

  Start reading the useful lines

  ReadLine () / / read a line

  ... / / Interpret the line

  Don't forget to add a control during i/o operations of robust error and to check the end of the file.

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.