With what tools/plugin can I do a similar drawing? With this plugin / tools can I do a similar design?

Similar Questions

• Can what tools I use to get rid of a virus?

  Original title: need a simple answer of Windows professionals only... So please help! Its driving me crazy!

  Hi there, if you are a Geek of MS Tec, I hope I get this response has you :) cos I look on the net and if you don't find an answer. My Question is... I also like to know what tools do a computer expertise use too find and get rid of the virus? Thank you. Dion ;)

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• On a Linux operating system, what tools need to developed a real-time application that communicates with FPGA?

  On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?

  It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.

  Is this possible at all?

  Thank you

  Michel

  Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.

  1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:

  Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014

  2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian).  The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:

  Linaro Toolchain for Cortex-A

  3. I installed the linux drivers from NOR-RIO 15:

  Driver OR RIO 15.0 for Linux

  4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:

  Example of API Interface FPGA C OR real time Linux and Eclipse

  Michel

• We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use? _ ___Windows IPod XP compatibility

  We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use?

  If you can install and run iTunes correctly, then I'm sure that sync with an iPod will work as well.

  What do you mean exactly with "add to iTunes"?

  Tim Baets
  http://www.BM-productions.TK

• WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

  WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

  WindowsUpdate_80246007 - cannot install Service Pack 2 for Vista. Can someone help me with this error message? What di I do to solve it?

  2 forums: you can go:

  1 Windows Vista IT Pro forum, section of Windows Vista service packs:
  Section of Windows Vista service packs:

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  2. Windows Update section:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• What tool so that I can make of the colored rectangles?

  What tool so that I can make of the colored rectangles?

  The rectangle tool, the rectangle roundeded tool or the Rectangle tool.

• Hello team, I'm NBNCo and we trueup contract with adobe. Please let me know what all software can be downloaded and used under this contract

  Hello team, I'm NBNCo and we trueup contract with adobe. Please let me know what all software can be downloaded and used under this contract.

  Hey Ashok,

  Please contact support for details of the software, as the same cannot be provided without any detail of the Ordinance on public forums.

  Contact the customer service

  Kind regards

  Sheena

• What a blog can integrate with Muse

  What a blog can integrate with Muse

  I tried tumblr and disqus, I need to know is there any good widget that can be used to achieve the same.

  Also bought qooqee tumblr widget but better to use the iframe...

  I also want to make an area safe for a client connection, it is desirable that any advise.

  Ashraf Ali

  Sounds like you might want to take a look at the host plan Web Marketing Business Catalyst. Blogs and secure areas are simple enough with Business Catalyst.

• [tools help] what tool can be used to move files? and update the row in table?

  I need help to find out what tool can help me in the next task:
  #1 moving file
  situation: after the extraction of a file, the file is moved to another directory.
  
  Update SQL #2
  Situation: what mapping tool can be used to update existing record / execute sql
  as UPDATED VALUE TABLE WHERE... or REMOVE...

  Take the employee data form table and connect name, id, "incative" (from constant) to the target table.
  Replace the update target property, and then set the properties of column-level.

  Find out what

  Update/Insert into mapping

  See you soon
  Katia

• When I try to open a bookmark I get a box that says: "that should make firefox with this file? When I try to change the 'open with Internet Explorer' I can't find firefox? This bookmark has worked well in the last week.

  When I open a bookmark a box appears that says "what should firefox with this file?" open with Internet Explorer? When I browse I don't find firefox to change. Last week this bookmark worked perfectly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• What updates I can delete?

  my laptop of filling with Microsoft updates and let me know if there are some that can be erased and whether I could erase a whole lot of them.

  my laptop of filling with Microsoft updates and let me know if there are some that can be erased and whether I could erase a whole lot of them.

  If your laptop is close to filling, it is NOT likely to be updates on a modern machine with the drive check the size C - especially with Windows XP.  You should not uninstall updated unless they are at the origin of the questions (and they would settle later unless already manually update you your computer) because they are there for a reason, and when we replace an old one - it REPLACES the old...

  What makes you think it's updates of your machine filling and not your stuff?  ;-)

  What is your primary hard drive (total and currently free) (c: usually)?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 15 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can remove the uninstall files for patches that installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Camileo P10 - what tools are needed?

  Hello

  first of all, I wanted to ask what codec is needed to edit the footage shot with a Camileo P10. I wanted to edit videos with Adobe After Effects, but it went all * files, indicating something preblems with audio and played the video chopped and cut. NA not having any problems, even corrupted video files worked better than the sh * this camera grows out of its sd slot.

  NO, I don't want to convert the files.
  NO, I do have solutions workaround.
  NO, I won't buy an another Toshiba cam.
  NO, I do have links of old threads that lead me no hand.

  What I want to hear is what Codec is needed, because there must be a mistake with it. Pieces very well with VLC, but not with WMP, winamp, quicktime, nothing else.

  Alternatively, you can suggest some tools that I use. I would have preferred a sledgehammer, but maybe a buzz saw is fine too. Unfortunately, I can't make a video to destroy the cam. You should know why.

  Hello

  > btw, I thought that it out by myself
  You can also post how you set for yourself? I think it would be interesting for other users.

  In addition, I put t understand your problem. Here he s a user to user forum where you can talk with people like you and me. This means that there is no guarantee that you will get an answer to your question. Not all questions can be answered users then sometimes it s advisable to contact an official authorized service provider. Guys can provide truly professional assistance.

  And I doubt that other manufactures have a better support. From my experience, I can say as I m satisfied with this forum and my authorized service provider and as you can read here, that can confirm many other users as well.

  Finally and above all the door here in the forum is portable because it s a Support Forum of computer systems that you see under the Toshiba Logo. Do you know what that means? This means that most discussions and users are in the notebook section research and software only.

  In any case, I m glad to hear the problem is solved. :)

• What key combination can be used to capture a screen to the Clipboard? __

  What key combination can be used to capture a screen to the Clipboard?

  http://en.Wikipedia.org/wiki/screenshot

  In Microsoft Windows, pressing the button print screen capture a screenshot of the whole office and put it on the Clipboard. Pressing the combination Alt - Print Screen captures only the current active window. In most versions of Windows, captured screenshots do not include the mouse pointer.

  Video content in the programs using a hardware overlay video converter is not captured by the method described above. Windows Media Player on Windows XP in its default configuration on supported hardware is affected by this. However, some third-party applications can capture overlay images.

  By default, Windows does not record the screenshot to an image file; the user is required to paste the image into a separate program (such as Microsoft Paint, which is integrated) imaging for the economy. Some programs, however, especially online multiplayer, will automatically save screenshots in a specified folder. From Windows XP (or any version based on Windows NT), it is no longer possible to take screenshots of windows DOS full screen without other software.

  Windows Vista and Windows 7 include a utility called Snipping Tool, first introduced in Windows XP Édition Tablet PC. This is a screen capture tool, which allows you to take screenshots (called snips) of windows, rectangular areas, or a free-form area. Shears tinsmith can then be annotated, saved as an image file or an HTML page or by e-mail. Unfortunately, it does not work with uncompressed, XP versions but represents an XP compatible equivalent.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://en.Wikipedia.org/wiki/Print_screen

  In Microsoft Windows, pressing print screen will capture the entire screen, while pressing the alt key pressed in combination with the screen print will capture the selected window. The captured image can then be pasted into an editing as a word-processing, electronic mail, or graphics softwareprogram. On the keyboards that have a caps lock key, you may have to press lock first. Pressing print screen, with the alt key and the SHIFT key pressed, turns on a mode of high contrast for people with visual impairments.

  See you soon.

  Mick Murphy - Microsoft partner

• What tools to download

  Hi I'm Riou of the India... can someone help me what tools to download for the blackberry application development and its links? Please help me...

  You can also use following link to downlaod eclipse and eclipse plugin for blackberry.

  http://NA.BlackBerry.com/eng/developers/javaappdev/javaeclipseplug.jsp

• What tool would you use to create optical fiber cables?

  I created which, I hope, will be appropriate brushes to create what must be an accurate picture of vector of optical fiber.

  My question is, what steps you would use to make realistic fiber in adobe illustrator cc 2015?

  I tried the tool brush and pen. However, I found cutting an ellipse in half and using her own path is a good source.

  Thank you

  So two thoughts here. According to Visual processing, there are many approaches to making it. However, here are two things of Foundation that I consider important for you after your Visual processing is established.

  1. create the appearance you want. Below you can see I used a single path with several properties top STROKE in the appearance Panel. Press the button Add race in the pane appearance with this selected path and modify each stroke to get the look you want. Here I use 3 stroke properties. One is black and thick, the second is more thin and grey, and the last is a gradient on an attack of apoplexy that reflects the gradient on the path. Once you have created, select it and press the new button in the Panel of graphic Style. When you draw something, now click that graphic Style and it will make it the path for you.

  

  2. create an Art Brush with scale between the guides. In this way he traces a path with the art brush and always finish by the fibers of the end of your thread unaffected. Draw your image and drag it in the Panel forms. Choose Art Brush as the type, and then click OK.

  

  When the following options come up, then opted to evolve between the guides and drag the guide so you flush the part you want to not scale or adjust.

  

  Now, whenever you draw a path, choose this brush in the brush Panel and it will automatically draw with the part between the guides and add the endpoint without scales or distorted.

  

  Good luck

  Bunch of brand
  lifebypixels