Withdrawal of a button event listener.

Similar Questions

• Button event listener get deleted?

  I'll keep this simple (I hope). There is a button with an event listener on an image of the main timeline. You click on the button to go to the next section and play a clip. The instance of this button does not exist on the following image. The event listener for the button get deleted automatically when you access this framework since there is no button?

  The clip is set up to send the main timeline to the previous image, when it's over and my event listener seems to disappear when I return to this framework.

  Thank you

  Jeff

  The button and everything which are entrusted to him is lost when you move a picture where it does not exist.  If the event listener is assigned in a frame earlier than where you click on the button, then it will not find the listener if you return to this image.  You must visit the frame where the first assigned listener.

• ERROR: Adding an event listener to a button in the main scenario

  I'm trying to get a simple script to work temporarily to show features. This file is a menu.swf file that loads below content.swf.
  
  There are 4 buttons on the main timeline and a stop at frame 40. On the same layer that my button is and frame 40, I have this code under actions. dineContent is the instance name of the button that I am referencing.
  
  However, I get access error 1120 property undefined.
  
  I know that I can add an event listener to an instance name. I have to create a film about all these buttons and then reference the instances of button inside the movie?
  

  I started playing with a bit more and found the solution.

  SOLUTION:
  in the property inspector to my instance of dineBtn named "dineContent", there is a contextual list under the "instance of: _" txt where you can choose between the track as button or Menu item.

  You must use the track as Menu item. the default value is button.

• [noob] Help understand why the event listener continues even after the withdrawal.

  Hey again,

  I'll try to do my best to explain. I can get this to work properly, but I'd like to understand why what I did before was not working.

  I have a little trouble understanding why an event listener continues listening to even after that I delete it. I have a facility where a Parent MovieClip ("CampScene") is established and an event listener is added to the look for a function ("walkUpToCampfire") to see if a condition is true ("comingFromAx is true", that won't be true until later).

  If it is true, an animation plays, an event listener is added to see if the animation is made and if it's an event listener is added to listen for a click ("campScene.goToAx") to a new animation to play and other events. (It won't be true until later.)

  If this isn't true (which is the situation that I work with at the start), the event listener said listening for a click on "campScene.goToAx" is implemented immediately. The function following removes the event listener, so it is supposed to stop listening to a click and let an animation play throughout.

  The problem is a continuous click to be listened to and if you keep clicking on the reboot of animation every time, which is what I don't want to happen.

  --------------------------------------

  I'm able to resolve the problem by adding the line "campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; or in mouseEnabled affecting false for "campScene.goToAx", but I try to understand what is happening.

  It is, even if I'm deleting the listener ("campScene.goToAx") in a function ("goToAxScene"), "campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; continues to wait for a mouse click, unless it is removed also?

  Again, I am trying to understand how it works.

  --------------------------------------

  This should be all ACEs. Of course, I would like to know if you need more information. (I can post the FLA / AS files if need be.)

  public void practice_adventure8() {}

  ...

  initial event listeners

  addEventListener (Event.ENTER_FRAME, CampScene);

  }

  public void CampScene(event:Event) {}
  
  remove the event listener
  removeEventListener (Event.ENTER_FRAME, CampScene);
  
  Add the first camp scene
  campScene.x = - 120;
  campScene.y = - 10;
  addChild (campScene);
  setChildIndex (campScene, 0);
  
  Add the event listener to see if guys works with camp fire or not
  campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  }

  IF RETURNING TO CAMPSCENE
  public void walkUpToCampfire(event:Event) {}
  
  If the guy is walking back to axe
  If (comingFromAx == true) {}

  event listeners
  campScene.guyAtCampScene.gotoAndPlay ("guyComingFromAx");
  campScene.addEventListener (Event.ENTER_FRAME, ifGuyDoneWalking);
  
  otherwise if initial creation
  } else {}
  
  remove the old event listener
  campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  trace ("comingFromAx = false");
  event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  campScene.goToBridge.addEventListener (MouseEvent.MOUSE_UP, goToBridgeScene);
  }
  }

  IF RETURNING TO CAMPSCENE FACT
  public void ifGuyDoneWalking(event:Event) {}
  
  If the guy ended up in foot
  If (campScene.guyAtCampScene.currentLabel == "guyAtCampSceneNormal") {}
  
  reset the Boolean values of scene
  comingFromAx = false;
  
  Add event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  
  }
  }

  GET READY FOR THE NEW SCENE

  public void goToAxScene(event:MouseEvent) {}
  
  delete movement event listeners
  campScene.goToAx.removeEventListener (MouseEvent.MOUSE_UP, goToAxScene);

  
  stop all sounds
  SoundMixer.stopAll ();
  
  play the clip of guy walking to AxScene
  campScene.guyAtCampScene.gotoAndPlay ("guyGoingToAx");
  
  check the label to see if axScene must appear
  campScene.guyAtCampScene.addEventListener (Event.ENTER_FRAME, addScene);
  }
  

  Your best bet to solve why things happen is to make use of the trace function.  In this case, you may have a trace run every time this listener can addedand any time it is deleted.  In this way, you should be able to see if it was added in after he deleted.  If there are several places where it is added, then adjust your tracks to indicate which line is involved as well.

• Global keyboard event listener?

  Is it possible to create a global keyboard event listener that is unrelated to a window, button, or other user interface element?  The best I could get to add the event to the window listener.  This only works if the window is active.  If the user clicks outside the window and then the receiver for the keyboard does not work.  In addition, when the dialog box appears first of all, it won't work until after the user has made some type of interaction with the window.  I want is to have keyboard shortcuts for users that work regardless of the place where they clicked on the screen, even if the dialogue window is not 'active'.  Is this possible?

  Here is the code I use to the receiver of keyboard for the window.

  mywindow.addEventListener ("keydown", function (k) {keyListen(k)});
  function keyListen(k){if(k.keyName=="Z"){alert("Do stuff here");}}
  

  I don't think that you can create listeners of world events, as for the first appearance of the dialog box, I solved this problem in my script: scripts buliarca BCM_ExtendShortcuts UI by a button activates the event listener to this button. A problem with attach listeners to window, it's in CC2015 events can only be attached to controls and not windows. Setting for windows works in CS6...

• Tween event listener does not

  Hello

  In a frame script, I have an event listener that must call "onFinish" function when the motion tween is completed. (See the relevant parts in red below). I never see this output "done the interpolation. It fails silently. I tried the addEventListener method in different places... nothing helps. What Miss me?

  Thank you!

  Fl.transitions import. *;
  Fl.transitions.easing import. *;
  Import fl.transitions.Tween;
  Import fl.transitions.TweenEvent;
  
  

  var currentFrameMC = animImg;
  
  var scaleXTween:Tween = new Tween (animImg, "scaleX", Bounce.easeOut, 1,2,2.4, true);
  var scaleYTween:Tween = new Tween (Bounce.easeOut, 1,2,2.4, animImg, "scaleY", true);
  var alphaTween:Tween = new Tween (animImg, "alpha", Strong.easeOut,.5, 1, 11, true);
  
  

  Put a listener on the MC I can't tell when it's interpolation of the scale.
  currentFrameMC.addEventListener (TweenEvent.MOTION_FINISH, onFinish);
  
  

  This is another event listner put a button:
  (The button, when clicked, will raise the narrowing of the MC animImg)
  reverseTween1.addEventListener (MouseEvent.CLICK, shrinkFrameMC);
  
  

  Retractable / scale down the anImg by interpolation
  This shrinkFrameMC(e:MouseEvent) function evolves down playback video clip
  {
  scaleXTween = new Tween (currentFrameMC, "scaleX", None.easeNone, currentFrameMC.scaleX, 1, 3, true);
  scaleYTween = new Tween (currentFrameMC, "scaleY", None.easeNone, currentFrameMC.scaleY, 1, 3, true ");
  Interpolation of the alpha of the clip again, this time to reverse state
  alphaTween = new Tween (Strong.easeOut, 1,.5, 11, currentFrameMC, "alpha", true);
  }

  
  onFinish(e:TweenEvent):void //This function performs an action when the MC frame interpolation
  {
  trace ("tween completed");
  NEVER SEE THIS OUTPUT
  }

  You set the event listener Tween interpolation, not of the object being interpolated.

• How to add an event listener to another window Native air

  Hello

  Anyone know if it is possible to add and event listener to a button created in another class.

  Basically, I create a save window with yes/no choice and the response must be returned to the window called the class to create this window.

  Note I have a save yes / no windows, so it must be accessible to the other windows that is created in it's own class

  Thanks in advance.

  It works very well, such a simple solution...

  			Import as_files.confClass;
  			var conf:confClass = new confClass();
  			CONF. Win ("save this test")
  			CONF._btn2.addEventListener (MouseEvent.CLICK, noFunc);
  			function noFunc(event:Event):void
  			{
  			trace ('NO')
  			}
  			CONF._btn3.addEventListener (MouseEvent.CLICK, yesFunc);
  			function yesFunc(event:Event):void
  			{
  			trace ('YES')
  			}

• remove event listener using.

  im making this app and I plug the twitter api, but then tell the button facbook or one of them is pressd tweets are always displayed. I'm sure its easy to remove an event listener, I know there are but I never did, so I have no idea how do... Can someone show me please?

  This is my code (don't worry too much on top, his twitter buttons just is near the bottom):

  Stop();

  import flash.events.MouseEvent;

  import flash.net.URLLoader;

  import flash.net.URLRequest;

  import flash.events.Event;

  import com.adobe.serialization.json.JSON;

  import flash.text.TextFieldAutoSize;

  import flash.text.TextField;

  Backbtn.addEventListener (MouseEvent.CLICK, goBack1);

  function goBack1(event:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 1");

  }

  TFbtn.addEventListener (MouseEvent.CLICK, goFacebookFromTwitter);

  function goFacebookFromTwitter(e:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "Scene 3");

  }

  TGbtn.addEventListener (MouseEvent.CLICK, goGalleryFromTwitter);

  function goGalleryFromTwitter(e:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 4");

  }

  TUbtn.addEventListener (MouseEvent.CLICK, goUpdatesFromTwitter);

  function goUpdatesFromTwitter(e:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 5");

  }

  TPbtn.addEventListener (MouseEvent.CLICK, goProfileFromTwitter);

  function goProfileFromTwitter(e:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 6");

  }

  TMbtn.addEventListener (MouseEvent.CLICK, goMoreFromTwitter);

  function goMoreFromTwitter(e:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 7");

  }

  FollowMebtn.addEventListener (MouseEvent.CLICK, goFollow);

  function goFollow(event:MouseEvent):void

  {

  MovieClip (this.root) .gotoAndPlay (1, "scene 6");

  }

  Twitter api //twitter api //twitter api //twitter api //twitter api //twitter api

  var loader: URLLoader = new URLLoader (new URLRequest ("https://api.twitter.com/1/statuses/user_timeline.json?screen_name=ScottMitchell"));

  loader.addEventListener (Event.COMPLETE, loadComplete);

  function loadComplete(e:Event):void {}

  processData (e.target.data);

  }

  function processData(data:String):void {}

  var tweets: Array = JSON.decode (data) in the table.

  for (var i: int = 0; i < 7; i ++) {}

  var tf:TextField = new TextField();

  var positionA:Array = [[20,90], [20 140], [20 190], [20 240], [20 290], [20 330], [20 380]];

  addChild (tf);

  TF. Multiline = true;

  TF. Width = 100;

  positionA.wordWrap = true;

  positionA.width = 280;

  tf.wordWrap = true;

  TF. Width = 280;

  TF. Height = 40;

  tf.textColor = 0xFF530D;

  TF. Text = tweets [i] .text;

  tf.autoSize = "left";

  TF.x is positionA [i] [0];.

  TF.y = positionA [i] [1];

  }

  }

  Stop();

  but I want only to delete the event at one of the other buttons is pressed, then I'd put it in the function button?

  exactly.

• Why this event listener stops listening?

  I built a flash animation that can be found here:

  http://faithkealadesign.com/get_files/blueflairphotography/index.html

  For some reason after that the timeline plays through completely (after the slide 'headshots and potfolios') the listener on the "child and family portraits" button stops listening and responding. Why is this? All other event listeners are are themselves except this one?

  Any advice?

  
  The following actionscript code:

  McChild.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler);

  function fl_MouseOverHandler(event:MouseEvent):void
  {
  gotoAndStop (65);
  trace ("Moused over");
  }

  McChild.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler);

  function fl_MouseOutHandler(event:MouseEvent):void
  {
  gotoAndPlay (71);
  trace ("Moused over");
  }

  McChild.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://blueflairphotography.com/index2.php?v=v1"), '_blank');
  }

  McMaternity.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler2);

  function fl_MouseOverHandler2(event:MouseEvent):void
  {
  gotoAndStop (81);
  trace ("Moused over");
  }

  McMaternity.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler2);

  function fl_MouseOutHandler2(event:MouseEvent):void
  {
  gotoAndPlay (100);
  trace ("Moused over");
  }
  McMaternity.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage2);

  function fl_ClickToGoToWebPage2(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://blueflairphotography.com/index2.php?v=v1"), '_blank');
  }

  McSeniors.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler3);

  function fl_MouseOverHandler3(event:MouseEvent):void
  {
  gotoAndStop (110);
  trace ("Moused over");
  }

  McSeniors.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler3);

  function fl_MouseOutHandler3(event:MouseEvent):void
  {
  gotoAndPlay (131);
  trace ("Moused over");
  }
  McSeniors.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage3);

  function fl_ClickToGoToWebPage3(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://YouNIQUEbyBlueFlair.com"), '_blank');
  }

  McBlog.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler4);

  function fl_MouseOverHandler4(event:MouseEvent):void
  {
  gotoAndStop (141);
  trace ("Moused over");
  }

  McBlog.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler4);

  function fl_MouseOutHandler4(event:MouseEvent):void
  {
  gotoAndPlay (162);
  trace ("Moused over");
  }
  McBlog.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage4);

  function fl_ClickToGoToWebPage4(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://blueflairphotoblog.com/"), '_blank');
  }

  McBoudoir.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler5);

  function fl_MouseOverHandler5(event:MouseEvent):void
  {
  gotoAndStop (172);
  trace ("Moused over");
  }

  McBoudoir.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler5);

  function fl_MouseOutHandler5(event:MouseEvent):void
  {
  gotoAndPlay (193);
  trace ("Moused over");
  }
  McBoudoir.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage5);

  function fl_ClickToGoToWebPage5(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://HAUTEbyBlueFlair.com"), '_blank');
  }

  McWeddings.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler6);

  function fl_MouseOverHandler6(event:MouseEvent):void
  {
  gotoAndStop (203);
  trace ("Moused over");
  }

  McWeddings.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler6);

  function fl_MouseOutHandler6(event:MouseEvent):void
  {
  gotoAndPlay (222);
  trace ("Moused over");
  }
  McWeddings.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage6);

  function fl_ClickToGoToWebPage6(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://blueflairphotography.com/index2.php?v=v2"), '_blank');
  }

  McHeadshots.addEventListener (MouseEvent.MOUSE_OVER, fl_MouseOverHandler7);

  function fl_MouseOverHandler7(event:MouseEvent):void
  {
  gotoAndStop (232);
  trace ("Moused over");
  }

  McHeadshots.addEventListener (MouseEvent.MOUSE_OUT, fl_MouseOutHandler7);

  function fl_MouseOutHandler7(event:MouseEvent):void
  {
  gotoAndPlay (253);
  trace ("Moused over");
  }
  McHeadshots.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage7);

  function fl_ClickToGoToWebPage7(event:MouseEvent):void
  {
  navigateToURL (new URLRequest ("http://blueflairphotography.com/index2.php?v=v1"), '_blank');
  }

  If the event listeners work first, then it probably isn't a problem with the code, although it could be a problem with a lack of code.  Change management such as new instances of the button are meet in keyframes?

• Cannot remove the Image event listener

  I'm clearly missing something and would be grateful for the help.  I'm trying to run an event handler when a full picture of loading, then remove the Manager so that it does not once again the image needs to be reloaded later.

  The problem I'm having is that the event handler simple custom ' disappear, despite the call removeEventListener on the Image object.

  The following example illustrates the problem (the example do anything useful... it's just the shortest example to demonstrate the problem).  (To run the application, you will need to provide any file JPEG ol ' named 'myImage.jpg' in the directory 'src' to your project).

  What to expect to happen is:

  (1) at startup, the image loads and runs of loadComplete().

  2) loadComplete removes the event listener so that subsequent re-loads don't get re-triggers the Manager.  I want only the Manager to run once.

  3) 'loadComplete' should appear in the debug console.

  (4) a click on the button should display only 'change picture' in the debug console

  What I get instead is that Manager loadComplete is not removed, and whenever I click on the button, loadComplete runs when the image is re-load (i.e., each button click results in the showing in the debug console 'change picture' AND 'loadComplete' ).

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "
  "<mx:Image width ="655"height ="181" source =" myImage.jpg" id ="MyImage" autoLoad ="true"="true"scaleContent complete =" loadComplete () " ="100"x ="100"/ >
  < mx:Button = "100" x = "341" label = "Button" click = "click (event)" / >
  < mx:Script >
  <! [CDATA]
  private void loadComplete(): void
  {
  trace ('loadComplete');
  myImage.removeEventListener ("complete", loadComplete);
  }
  private void click(evt:Event):void
  {
  trace ("change Image");
  myImage.load ("myImage.jpg");    Reload image even; This is just an example
  }
  []] >
  < / mx:Script >
  < / mx:Application >
  

  Hello

  You can only remove event listeners you added with the addEventListener() method in an ActionScript block. You cannot remove an event listener that has been defined in the MXML tag, even if it has been registered by using a call to the addEventListener () method that was made within an attribute of the tag.

  Check this page for reference.

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_05.html

  You can change the code a bit get it works

  
  
  private function myImage_creationCompleteHandler(event:FlexEvent):void
  {
       myImage.addEventListener("complete",myImage_completeHandler);
       myImage.load("myImage.jpg");
  }
  
  private function myImage_completeHandler(event:Event):void
  {
       myImage.removeEventListener("complete",myImage_completeHandler);
  }
  

• On the motion tween event listener

  Hi all

  I have worked with Flasg CS4 HAVE 3.0 for a few weeks now, and I touched something that left me open-mouthed all by building a portfolio site.

  Staging:

  In order to maintain the low initial file size, I currently use UILoaders to control the content that is currently viewing.  I have five total UILoaders that change the source in that based on what the user clicks on the button.  Each UILoader is nested inside two clips so that I can control the transition animations and so they do not overlap.   Example:

  I.Index/Stage

  A.Parent Movie Clip

  1. nested Movie Clip with custom entering and leaving the motion tweens on the UILoader child.

  a. UILoader

  So far, I was able to use the buttons on the main to shoot to the top of the UILoaders eco-friendly stage.  When you click a button, an event listener calls the UILoader, sets its source and anime 'in' thanks to its parent movie clip.  When you click a different button to replace the source of the UILoader, the original source is anime 'out' with the same parent movie clip.

  Here's the problem:

  I can't understand how to change the source of the UILoader that after the custom motion tween is completed.  I know how to configure a listener of events on each button to change the source of its respectful UILoader, but I need the animation 'out' motion tween to complete to the UILoader before the new source is caught.

  It seems to me that there should be an event listener to attach to button, listen to an interpolation of specific movement at the end and attach a function to change the source of the UILoader only at this time there.

  Here's a sample script that toggles the IULoader source:

  content_mc.profile_btn.addEventListener (MouseEvent.CLICK, profileClick);

  
  function profileClick(e:MouseEvent):void {}
  profile_mc.profile_mc.profileLoader.source = "Profile.swf";
  profile_mc.gotoAndPlay ("Enter");
  }

  content_mc.work_btn.addEventListener (MouseEvent.CLICK, workClick);

  function workClick(e:MouseEvent):void {}
  profile_mc.gotoAndPlay ("Exit");
  }

  Any ideas?

  I would really appreciate it.

  Yes, you might have a function coded everywhere where he would be executed better and you could call this function at the end of the Tween.  If interpolation is inside a movieclip, then you can precede the function call with MovieClip (parent).  or MovieClip (root).  Depending on how deep you are on children...

  MovieClip (parent) .callFunction ();

  You can also assign an event listener personalized to the movieclip that listen to the parents.  At the end of the Tween in the mc, you might have...

  dispatchEvent (new Event ("imDone"));

  In your parent assign you a listener for the event to the mc.

  youTweeningMC. addEventListener ("imDone", eventHandler);

  function eventHandler(event:Event):void {}
  Regardless of your intentions
  }

• How can I add an event listener

  I tried to add an event listener for this object:

  < mx:Button id = "calculateButton".
  label =""
  toolTip =""
  styleName = "enable".
  Click = "swapToResultsState ()" "
  rollOverEffect = "{glowButton}".
  = Red "-100" horizontalCenter = "0".
  tabIndex = "85" / >

  by using this code:

  calculateButton.addEventListener (KeyboardEvent.KEY_DOWN, swapToResultsState);

  who gave this error:

  Several markers to this line :-1120: access of undefined property calculateButton. -1120: access
  undefined property swapToResultsState.
  

  What I am doing wrong?

  Keyboard events spread so you do not need to forward.  Just can't do anything if keyCode is 9

• the click event listener smile ActionScript 3.0 works only once

  I am a newbie. I use actionscript 3.0 and I have a file .as separated with all my action script code. I have 2 buttons called myBtn1 and myBtn2 in my .fla including the base class file is two flash.display.SimpleButton.
  The event listener for myBtn1 (buttonClickHandler) always fire correctly. But the eventHandler for myBtn2 (textClickHandler) fires once and only if myBtn2 is the first button click. (I know that these event handlers and instructions switch sounds pretty ridiculous with a single element of each, but I removed the code).
  Why textClickHandler only seems to work once?
  Any help would be greatly appreciated!
  
  

  According to one of the Adobe Technical Notes sometimes the event mouse move is missed by the DisplayObject, thus, rather than attach the listener to the stage. Which works very well. So now instead of
  
myBtn1.addEventListener(MouseEvent.CLICK,buttonClickHandler);
myBtn2.addEventListener(MouseEvent.CLICK,buttonClickHandler);

  I have
  
stage.addEventListener(MouseEvent.CLICK,buttonClickHandler);


  Read all about it:
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=69a2ae4b

• URGENT: Problem of EVENT listener

  Hi all
  Thanks for your time. I am facing a little problem with the event dispatcher and the event listener to be added. Well, I'll explain the problem.
  
  I have a MovieClip named BUTTON_SET and I gave "ButtonSet.as" class link.
  Inside this BUTTON_SET, I'll have a few buttons and they also have "UIButton.as" as a binding class
  
  UIButton expedition press and release events, but unable to capture it using the button class. Here, I enclose the Code and I gave the URL Source too.
  
  to my knowledge: UIButton class is not triggered when the button is ready for addListener.
  Please help me solve this problem.
  
  If I can't find a solution, I need to change all my class structures.
  
  CLICK HERE TO SEE THE SOURCE CODE
  
  

  According to your Code, when you call the InitHandler Functionction buttons may or may not be launched. Then use the Enterframe to check if its charging or not.

  Note that in the button to replace the Manager call init.

  this.onEnterFrame = Delegate.create (this, initHandler);

  a_l'_interieur_de this initHandler, remove the function that will help you if you do not use any Enterframe for any other manipulation)

  delete this.onEnterFrame;

• How can I create an event listener for the change of variable shared or similar?

  Hello

  I have a 'big' 6 devices communicating measurement system via the TCP protocol. The system is designed to use REST (the representative State transfer) with JSON (JavaScript object notation).

  Now, I need to add labview program to this environment. I've implemented a solution to 'work' with the help of this forum. Thank you for this! Now, I need to do better (currently no timestamps, large delays, etc.).

  I currently have a web service deployed using http-get as input. My web service .vi is just passing the web entrance to shared variables that are then questioned in real measurement program. Reason is that when I put the measurement program directly to the web service, it does not (something about rights and dependencies). Measurement program includes one third of the owners (Instron) drivers. Also I would not direct access via the network to our mechanical testing device potentially dangerous.

  Now, I want to change the message from the web services .vi commensurate .vi. Currently I have a loop of 10ms to query for changes in the shared variable. Is there a better way to do this? I thought create a listener to the shared variable change events.

  In addition, if you have any ideas (preferably, working code example) how to make the interface between labview and TCP-JSON I would really appreciate it.

  BR,

  Juha

  Currently in LabVIEW, the only way to create an event listener or event NSV is to use the DSC toolkit.  Most of the time the DSC is a very expensive tool that simply encapsulates the functionality that is built into the motor of the PSP and OAS and which is accessible to anyone who can program in LabWindows/CVI.

  http://zone.NI.com/reference/en-XX/help/370051P-01/CVI/libref/cvicnvcreatesubscriber/

  If you want to collaborate, I would like to create a small library of LV that would create a base SV events using a vi LV reminder or possibly passing return user LV event which is how works the DSC toolkit.  I asked OR several times to explain how do this and they're very tight discreet about it.  I guess that they do not want to give users LV less reason to buy the DSC.