[WLAN controller] Unplug the PC Client in AP

Similar Questions

• WLAN controller redundancy

  What is the method to provide redundancy to the WLAN controller

  the function?

  The unified access point allows a backup controller WLAN? In this case, the configuration of the two controllers is automatically synchronized?

  Hi Andres,

  The world of WLC is how an AP is covered in case of failure of a WLC. It is not without some "down time" in case of failure, but two controllers are active. You must keep in mind that the AP cannot be certified a WLC both so it of the best you can do when a WLC fails AP then must re - register with the backup, it is not a process completely seamless.

  This has some really good info;

  WLAN controllers to access tipping points light Configuration example

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#C4

  For more recent versions of release WLC (there are also)

  Controller LAN wireless and lightweight external Tipping Points access the sample Configuration of mobility group

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a00809817ca.shtml

  See you soon!

  Rob

  Thank you to support CSC helps Haiti

  https://supportforums.Cisco.com/docs/doc-8895

  https://supportforums.Cisco.com/docs/doc-8727

• Re: Satellite A100-638 has a stuck key even when I unplug the keyboard.

  I have a Satellite A100-638 with a stuck tab button, up to now, I got around the problem by using a USB keyboard and keytweaking program.

  Unfortunately recently I got problems of coherence on the disk. I installed Win XP on and I can't do a consistency check due to the cancellation scans if no key is pressed. I tried to unplug the keyboard of the laptop motherboard, I think I made the success, but the Tab key always records as being pressed.

  The USB keyboard is fine and has no problem whatsoever.

  If someone could help, I'd appreciate it.

  Looks like the keyboard on the motherboard controller may be defective.

  Are you sure this isn't a driver/software problem? Have you recently installed a USB mouse?

• Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7

  HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1

  Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012

  Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.

  I tried the things:

  Call support HP - not useful at all. It is under warranty.

  IPv6 disabled

  Disabled wireless

  Disabled network card stopcock energy saving

  Definition of recovery CLIENT DHCP on:

  First failure = restarting the Service

  Second failure = restarting the Service

  Subsequent failures = restarting the Service

  Reset Fail Count after = 120

  Restart the Service after = 0

  But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.

  I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.

  Any help greatly appreciated,

  Larry

  HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!

• Cannot add Windows Vista PC to Windows 2008 domain. Error message: an attempt to resolve the DNS of a domain controller in the domain being joined has failed...

  When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field.  I don't know why I can't add my new Windows Vista computer.

  I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP)  I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.

  After initial search for information, I found the following error message when you do a nslookup from my new vista box.

  Nslookup mydomainname

  Server: hqserver64.mydomainname.net

  Address: 192.168.0.99

  hqserver64.mydomainname.NET cannot find mydomainname: Server failed.

  I do not understand why I suddenly get these error messages when I was able to reach this area in the past.

  Hello Stan Smith,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Can built-in DHCP of WLC provide IP addresses for the wired client?

  Hello

  We have a WLC running on 7.0.98.0. It provides IP addresses for users without comment thread. Now, we would like to put a couple of wired posts for customers who do not bring mobile no. I wonder if I put these workstations on the same vlan without comment thread, they can always get IPs of the WLC. If this isn't the case, I put the static IP on these workstations.

  Thanks in advance.

  Robert

  Rob:
  The answer is simply "no". WLC cannot provide clients wired on the same VLAN wireless whose IP address if DHCP is configured on WLC.

  Fbarboza above metnioned is a 'very' special configuraiton on wireless LANs where the WLC is configured to support some wireline customers and he needs to have two WLCs (the show is called Wired comments). This particular case does not apply to your situation.

  With your situation, my answer above apply.

  Note 
  A internal DHCP server pool will only serve the wireless clients of that controller, not clients of other controllers. Also, internal DHCP server can only serve wireless clients and not wired clients.
  

  Reference: http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70wlan.html

  HTH

  Amjad

• WLAN controller download

  Hello

  I bought a new controller (model 2500) Cisco wlan and a point of access from a provider certified Cisco. Can I register the controller on the

  Site Web of Cisco to enable access download software associated with this controller? I want to download the latest version of the software "AIR-CTVM-K9-8-0-100-0.aes".

  but I'm not allowed according to my profile.

  So, how can I access the latest version of the software for my 2500 WLAN controller?

  Concerning

  Gideon

   Can I register the controller on the Cisco website to enable access to download software related to this controller?

  Yes and no.

  The quick answer is no. your authorized reseller of Cisco should be able to "join" the serial number of your WLC in your Service Agreement and your Service agreement is attached to your CCO login.

  If you go direct to Cisco, it will take time to get to the bottom of the details, you need to provide a lot of information so it's best to get your Cisco reseller to contact them.

• Inconsistent WLAN controller with AP 'AIR-LAP1142N-E-K9.

  Hi all

  We have awireless LAN Controller "Cisco 4402 with software version 3.2.150.10" we use the Access Point 'AIR-LAP1242AG-E' and his works fine, we bought the new APs with the model "AIR-LAP1142N-E-K9" but its not working with our controller and restart continuously. I connected the console and checked the logs from the console that is given below. Please let me know is this controller WLAN is compatible with the APs new or not, or do I need to upgrade the operating system of the LAN Controller and if I upgrade the operating system of the WLAN controller it will support the old APs or not.

  Thank you in advance for your response and support.

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: C4:7 D: 4F:3 A: 9E:D0
  Part number: 73-11451-08
  Kit numbered PCA: 800-30554-06
  Revision number of PCA: A0
  Serial number of PCB: FOC14080B1U
  Top Assembly part number: 800-31273-04
  Top of page the Assembly serial number: FCZ1414W1X5
  Top of page revision number: A0
  Product/model number: AIR-LAP1142N-E-K9
  % Please first set a domain name.

  Press RETURN to get started!

  * 00:00:06.561 Mar 1: * CRASH_LOG = YES
  MAC Ethernet address of base: C4:7 D: 4F:3 A: 9E:D0

  * 00:00:06.749 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized event AP log (contains 82 messages)

  * 00:00:08.794 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to
  * 00:00:08.810 Mar 1: % SYS-5-RESTART: System restarted.
  Software Cisco IOS, C1140 Software (C1140-RCVK9W8-M), Version 12.4 JA (21 a), RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2009 by Cisco Systems, Inc.
  Updated Tuesday 8 June 09 16:28 by prod_rel_team
  * 00:12:08.010 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
  * 00:12:08.982 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to
  * 00:12:18.211 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.20.20.228, mask 255.255.255.0, hostname APc47d.4f3a.9ed0

  * 00:12:28.972 Mar 1: % CDP_PD-2-POWER_LOW: all disabled radios - WS-C3560G-48PS NEGOTIATED (0026.98a6.2786)
  Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)

  Translate "CISCO-LWAPP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)

  * 00:12:37.968 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.
  * 00:12:37.971 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
  * 00:12:37.973 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROLLER
  * 00:12:47.974 Mar 1: % 3-CAPWAP-ERRORLOG: go join a lwapp controller
  * 00:12:47.974 Mar 1: % LWAPP-3-CLIENTERRORLOG: put AddressCalled of Transport
  Writing of the
  * 00:12:47.981 Mar 1: % LWAPP-5-CHANGED: CAPWAP changed State to ADHERE
  * Jun 29 16:32:00.616: % SYS-4-PUPDATECLOCK: periodic update clock with ROMMON failed because size left in ROMMON (4294967295), large (29), error code (- 1).
  * Jun 29 16:32:00.616: % SYS-5-RELOAD: reload LWAPP CUSTOMER the request. Reason for charging: CONTROLLER INCOMPATIBLE VERSION.
  * Jun 29 16:32:00.616: % LWAPP-5-CHANGED: CAPWAP changed state at the bottom of the event log in NVRAM...

  using the values from the eeprom

  WRDTR, CLKTR: 0 X 86000800 0X40000000
  RQDC, RFDC: 0X8000003B 0X0000020F

  init done DDR

  IOS Bootloader - start System.
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0 X 86000800, 0 X 40000000
  RQDC, RFDC: 0X8000003B, 0X0000020F

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIEx: initialization done
  flashfs [0]: 5 files, 2 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 32385024
  flashfs [0]: bytes used: 2271744
  flashfs [0]: available bytes: 30113280
  flashfs [0]: flashfs fsck took 16 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: c4:7 d: 4f:3's: 9e:d0
  Ethernet speed is 1000 MB - FULL duplex
  Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#######################################################################################################################################################################################################################

  File "flash: / c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" unzipped and installed, point of entry: 0x4000
  execution of...
  ENET stopped

  If you have login valid ORC, go to Support > download software > > Cisco Wireless LAN Controller 4402 Wireless > Wireless LAN Controller Software

  Release notes for the controllers wireless LAN Cisco and Points of light access for version 7.0.98.0

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html

  Upgrading to a new version of the software

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp472449

  Remember messages useful rate.  Thank you.

• Activation of RADIUS Auth/Acct on WLAN controller 4402

  Hi all

  Just need to activate authentication RADIUS and accounting on Cisco 4402 WLAN controller, so this controller WLAN what admins can be authenticated through a RADIUS server.

  I want to assure you that I could connect via the console or the local user account, if the RADIUS auth/acct on WLAN controller does not work for some reason any. I don't want me locked out if RADIUS auth/acct does not work.

  I have set up RDIUS for switches cisco 3750 and works very well.

  any suggestions please.

  Thank you very much.

  Keita.

  You must set the order

  Security > priority > user management

  Network user is for wireless authentication.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• 2112 WLan controller and Point of access LAP1042n issue

  Hello

  I recently bought a 2112 a Wlan controller a number of LAP1042n Ap of the AP will not join the command and the message I get in the console of the AP, it is that the AIR-WLC2100-K9-6-0-199-4.aes firmware does not support this model?  Can someone please verify that this is the case?

  Firmware AIR-WLC2100-K9-7-0-98-0.aes to overcome this problem?

  Thanks in advance

  David

  Yes, 7.0 doesn't suppoert he...

  CHECK THE RELEASE NOTES for more details...

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html

• Impossible to access host 4.0 U2 of the VI client to the DC operation

  Hello

  I have a single ESXi host 4.0U2. I have a virtual computer that acts as a domain controller. I can't see the host using the VI Client if the domain controller does not work, it says that the connection is refused, even though I can ping the host. I can't access the host viat its IP address in a browser too. This has happened since the upgrade of U2. Maybe the host should the domain controller, how can I remove that so I can access it with market no VM. This only occurs after a host reboot. I can stop the DC and not lose the connection, as long as the host is powered.

  Tony

  Try entering the host ESX information C:\Windows\System32\drivers\etc\hosts and try

  This should solve, if the problem exists because of the resolution of host name problem

  Thank you

  Nithin

• Half the Office disappears when you unplug the external monitor

  I have a MacBook (early 2011) with a single office shared between two monitors - with one hand on the internal screen and the other half on a Dell 23 inch. The Dell is my first when I use both at the same time. Until a few months ago, when I unplugged the external monitor, all windows automatically appears in the monitor to the laptop, including the menu bar and dock.

  After an operating system upgraded a few dos systems (I'm on version of El Capitan.6), when I unplug the screen seems not to register - in other words, the left side of my office, including the menu bar and the dock, and all the apps that were there just to disappear. So my laptop seems to think that the other view is always connected and direct, unless I restart with the detached monitor. (I unchecked 'Displays have separated spaces') in Mission Control.

  Is that what I can do to force the Office to redesign the internal screen? (Note that the display is a Dell S2330MX, which seem not to support any Mac OS - so who could answer the question here.) Thank you

  I've known who issues from time to time, try to close and reopen the lid, which needs to redraw your office.

• If you use firefox for linux, I'm unable to open the game client for a called flash browser game darkorbit.

  I'm using Linux Mint 17.2 xfce.
  The Firefox I use is 42.0 Mozilla Firefox for Linux Mint Mint - 1.0.
  Shockwave Flash is 11.2r202.
  The browser Flash game is DarkOrbit ( www.darkorbit.com ).
  The game was working fine until about 2 months ago.

  I log in the game (as before) and get on the last page without any problem.
  When I click on 'Start' to go to the game client, the screen is black. The browser tab written game client will blink twice.
  Please note that everything works fine when I use the chrome Web browser.
  DarkOrbit works very well with Firefox on Windows.

  Is there a way to use the pepper Flash used in Chrome/chrome using the freshplayerplugin wrapper.

  Your Linux distro may have related packages for it.

  Alternatively, you can use Chrome or chrome for that one site and use Firefox for everything else.

• Folders that I create in Thunderbird do not arise outside of Thunderbird (on the web client for my emails)

  Hello

  It's my first post because I can usually find supported using google, but I can't see any advice on this.

  Lets say I create a folder and name it 'sites' in Thunderbird, I created a rule for every email I get from stores online on their promotions go in this folder, so they do not distract the important emails, but I can view them later if I want.

  When I then log in my account outlook through their web client or if I check on my phone (which is where I'm mainly going through emails), the folders that I created in Tbird, do not show on my phone or the email provider webclient.

  I tried logging in and out of my web client and Tbird but records do not update, they remain in the Tbird but do not show in the web client or on my phone, which means that I can not read the messages held except when I home on Tbird.

  I appreciate your response.

  When your problem has been fixed, please mark the thread as "resolved".
  Thank you.
  Have a complete backup of your profile folder is strongly recommended in all cases.

• Hi, I just got a second generation ipod nano, and whenever I have unplug the charger a line crosses the screen. Help, please

  Hi, I just bought a used second generation ipod nano and whenever I have unplug the charger a line crosses the screen and I can't do anything with the ipod. Help, please.

  When you do a Reset (reboot) on the iPod

  Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

  do you see this line on the screen when the Apple logo?  If you do, it is probably a hardware problem.  If the line is not there at the start, but returns after the iPod starts, you can do a restore of the iPod using iTunes.  This d erases the IPO, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem persists after the restore, the cause is likely to be hardware problem.