Word no longer works after Vista automatic update
It is now the third time that I had this problem. When Word is open and my computer automatically applies an update to Vista, Word doesn't work more once the computer restarts. Word opens, but it is not functional. It does not, will not answer even the scroll bar. I checked and the latest updates (13 August) have nothing to do with the word: they are all Vista and Outlook related. I managed to lose access to the resolution I found the other two times this happened and would appreciate an overview of how to solve this problem. I am also concerned because it happened with each update of Vista.
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of Word
They will help you with your Word problem in the Office discussion groups above.
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Microsoft Word no longer works after Vista update
Hello
MS Word has stopped working immediately after Windows Vista updates automatic.
When I try to run Word, it opens, but I can't perform tasks of hormaux in the document and when I try to close (or save) I get the message "Microsoft Word has stopped working". The system diagnostics are unable to solve the problem.
I have a Dell Inspiron 1525. 32-bit operating system. Windows Vista Edition Home Premium.
Thank you
DoraHi Aldous and others
I have the same problem and resolved to mark a change in the registry as indicated in this article, http://support.microsoft.com/kb/921541/en-us
I restart and open and reopen and it works fine so far.
Hope it help you too.
Best chance
Kenneth
Sorry for the bad spelling :-(
-
Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014
Things no longer work after the update are:
1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)
2 finger three windows
3 Thre finger of several files and text selection.
I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@
It was just beautiful in yosemite please give a solution.
Please read this message before doing anything.
This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.
Step 1
The goal of this step is to determine if the problem is localized to your user account.
Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.
While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.
Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?
After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.
* Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.
Step 2
The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.
Please take this step regardless of the results of step 1.
Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.
Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.
The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.
Test in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.
-
All browsers stop working after the automatic updates
* Original title: Windows 8 - all browsers stop working after update
Hi, I have a Dell 14R with Windows 8, standard configuration. After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website. Home page only on a browser worked. Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem. Then I disabled the updates for windows, just in case. Did you anyone has a similar experience lately and was able to locate and solved the problem?
I've updated for Windows 8.1 over the weekend, it seems to work great so far.
-
The Styles of bindings are no longer works after the new update. (2015.1)
The Styles of bindings are no longer works after update of the MUSE 2015.1.
Hello, would you be able to send your Muse file so that we can investigate more? When I tried to reproduce the problem, I am not able to see it with a whole new file of Muse.
Please send your application to [email protected], with "attn:Jason" in the subject line and a link to this forum topic. If it is greater than about 20 MB, please use a sharing as Dropbox service.
-
HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP
I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!
Hello @MAlex_B,
Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!
I understand that you have a problem with the display and wanted to help you! I see only after an update, the external monitor no longer works.
Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state? If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly? You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca
Please post back with the results. Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
Goggle Chrome stopped working after an automatic update of Windows
Hello
I have WIN7 Home Premium upgrade of VISTA. Goggle Chrome had been working great, until a updated Automatic sneaked in this morning and updated on its own.
I have uninstalled and reinstalled google chrome several times and did a scan full antivirus and no viruses were found. Chrome is currently at the
computer... it opens a blank page and that's it.
Some time ago I had this problem and I wish that I got my notes because an analyst suggested to remove a particular service with a 'C' early and as soon as
as it has been deleted, chrome worked.
Can someone advise how to correct my problem and google chrome issue.
Thank you.
Havanese
Hi, this is really a problem for the next forum: https://support.google.com/chrome/table/3097302?hl=en&ref_topic=3421642
-
Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G
Hello
Code 39 means that the driver is corrupted or missing.
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
These however is a possibility depending on which and how many you have installed.Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
allows the reader to work (not re - install until the issue is resolved).-------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Notifications no longer work after the latest updates.
As the title suggests, notifications for email, applications, pop etc. is no longer at the top right and no audio playback. He grew up in another forum, so I'm posting here too.
And before ask you, yes notifications are turned on and the audio clips are selected in the sound theme.
Hello
You are facing problems with notifications on Metro and audio applications after installing the updates.-Updates you installed recently?-You have all updates are installed on your computer?Method 1: I suggest you run the troubleshooter App from the link and if it helps.
http://go.Microsoft.com/fwlink/?LinkId=268423
Method 2: I also suggest you to follow the steps from the link and check if the problem persists.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-appI hope this helps. -
Several features of Firefox do not work after the automatic update
I got an update for firefox to 8.0 today (I had tried 8.0 beta a few weeks earlier, but returned to 7.0 after I found that some essential Add-ons didn't work). Here I have the following problems:
Web sites - does not display correctly
-None of my addons work, I can't get the buttons or menus to work.
-My addons page is white with a "Loading...". "stuck. I tried waiting for 5 minutes, without change.
-When I run firefox, my favorite bar is empty. If I delete and add new, it appears normally
-I can not restart Firefox in safe mode
-I can't access anything: configYou are welcome
-
Some parts of GMAIL no longer work after a recent update.
Until recently I couldn't answer/compose emails on my gmail account.
Also, the "Chat" box would be.I believe that after the 3.6.12 update unless I go to the BASIC HTML view, I can't answer/compose emails. Or watch the CHAT option.
I tried both machines - each with FF (latest version) and both "fail". Using a machine with IE, I can answer/dial emails, and I see the DISCUSSION list on the left of the screen.
Honestly, I hope that's not something I've done, because it did not work and I do not remember changing anything to stop functioning.
Check the dom.storage.enabled pref on the subject: config page and make sure that the pref is set to true.
To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
If you see a warning then you can confirm that you want to access this page. -
Control of Toshiba Satellite A100: Buttons no longer work after the Xp update
Toshiba satellite A100 iOwn and use Windows XP Edition family.
After installation of windows update a few days ago from the functional buttons on the left side of the keyboard stop working - I can use the top running internet explorer or windows media player, but the other 3 buttons do not respond.I tried to run the system in the previous point, but it gives me error...
Utility Toshiba for the buttons has been downloaded and reinstalled but still not resultDownload and install CCleaner tool. This windows registry repair tool. It s for free. Repair you the OS.
Download the right modules common to you notebook series from Toshiba page, then reinstall it.After new control restart if the Toshiba control buttons functions!
-
Satellite P200 - Webcam no longer works after Vista upgrade
Since the upgrade Vista Home Premium, Vista Ultimate, the built-in webcam did not work. I have re-installed the software camera which proceeds to driver software update point. Process to fail with the message "Windows has encountered an installation problem the software of the driver for your device. "Windows found driver software for your device, but has encountered an error trying to install it." Chicony USB 2.0 Camera ". «The driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.
Download from Toshiba site does not contain the drivers for this device. only the Camera Assistant Software. Chicony Electronics site contains some drivers for cameras, but is not described cameras and refers to model numbers that are consistent with the references of Toshiba. I tried the latest model, but the driver installation completed with no termination message and the camera still does not work. Running the installation again recognized that something had been installed and proceeded to remove it, once again no completion message. A real class act!
Can anyone suggest where I might find a solution?
Hello
> Download from Toshiba site does not contain the drivers for this device. only the Camera Wizard Software
The pilot what s * and * software! This is a set that you need for the webcam!Before installing the latest version of the software, you must remove the old one first of all. Then, restart your laptop and use CCleaner to clean your registry and Windows. A reboot, and you can install the latest drivers from the Toshiba site.
Check this box!
-
DRAC5 remote console no longer work after 51 Java Update
Hello world!
After the usual Java (at 51 update of Java 7) update the remote console does not start no more. The java application launcher shows a "unable to launch the application" - error. Here are some details:
The DRAC firmware version: 1.65 (12.08.16)
java.lang.SecurityException: missing required permissions manifest attribute in the main container: https://drac.example.com:443/plugins/vkvm/avctDRAC5Viewer.jar
at com.sun.deploy.security.DeployManifestChecker.verifyMainJar (unknown Source)
at com.sun.deploy.security.DeployManifestChecker.verifyMainJar (unknown Source)
at com.sun.javaws.Launcher.doLaunchApp (unknown Source)
at com.sun.javaws.Launcher.run (unknown Source)
at java.lang.Thread.run(Thread.java:744)I hope that Dell will provide a fix as soon as POSSIBLE.
OK - there is a work around:
The DRAC5 systems add to the 'Site Exception list' (this can be done in the Java Control Panel in the "Security" section).
However, it would be nice if Dell would fix this in any upcoming firmware version.
-
Saved passwords do not work after the automatic update
Firefox Auto-setting to update itself on a windows 8.1 machine 35.0. But none of the saved passwords work, I see all the passwords in options-> Security-> saved passwords, but when I go on a website he fills the username, but does not have the password. If I manually enter the password that it does not offer to 'save' (so of course that he knows it's a password for this site)
Very annoying.
Should I just back up and reinstall 35.0 from scratch?
I keep backups separated from all my files so I was able to restore passwords support. Apparently during the auto-update feature that something has been corrupted into logins.json or keys3.db cause no amount of re - install firefox on the existing files worked.
Maybe you are looking for
-
I know it's a long question/suggestion, but I wanted to give my use case. I have an iPad 2 Air right now, that I use for personal work content and limited content is mainly. I'm certainly interested to go to the Pro 12.9 inches because it has a lot m
-
How can I download emails in subfolders of yahoo mail Thunderbird?
I use Thunderbird 31.3.0. Is there a way to download the emails in subfolders of yahoo mail, not only from the Inbox?
-
IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly cor
-
OfficeJet all-in One 8600 impression 110lb hardcover
I try to print 110lb notecards on this printer, which replaces a 8500 all-in-one who has never worked with my mac. It did not work the first time I tried it. Anyone got this to work or have any suggestions on the acquire to work?
-
Scroll the probs gel and script
I can't stop the error for long running script as one disappears from the Web page. I also scroll freeze! Help!