Work well with Photoshop CC 2015 PHOTOMERGE (assemble two photos by doing a last picture with my iMac it's doesn't work!)

Similar Questions

• Photoshop CC 2015.5 - Ctrl + A, C & V does not

  This has been resolved in an hour and a briefings with Adobe support, but since I couldn't find a good answer online before this session, I thought I'd post this in case where someone of other experiences similar strangeness...

  This happened in the few days I had CC PS, from the beginning. After the tech guy looked all kinds of things and I was able to use these shortcuts in safemode, tech wanted to remove part of my software. I suggested Dreamweaver CS3 I had installed just before installing PS CC. "No, which would not cause a conflict," he said. But, while he watched, I uninstalled Dreamweaver, came back to PS and my job now shortcuts!

  Interesting. Troubleshooting is a risky business, especially through user forums. It has stock answers that work, but its factors outside of Photoshop that are hard to find.

  It could be a third-party utility "trap" the key combinations. In my case, my graphics card "hotkeys" caused problems.

  It's not so much knowing that there is a problem, but discover that the property is the problem.

• Photoshop cc 2015. Photomerge does not open Pentax PEF files in Bridge or Photoshop.

  I use a Mac Pro with El Capitan. It wasn't a problem for me until the last update of photoshop. Pentax PEF files does not open Photoshop CC 2015, Photomerge. I tried to open Raw Pentax PEF files to my 645Z in bridge-tools-photomerge both file-automate-photomerge in photoshop. Neither the program recognizes the Raw PEF file. Instead, I get this message that Photomerge is in need of at least two selected files. The files the other cameras RAW always opens in photomerge.

  Curiously, the Pentax PEF Raw files open in Adobe Raw Converter and open molten at panorama in Adobe's Raw Converter.

  I uninstalled creative cloud including my preferences and reinstalled creative cloud with photoshop and bridge. I have reset the bridge preferences.  I checked under the bridge, Healt folder as photoshop cc is selected for the Raw of Pentax PEF file. None of these actions corrected the problem.

  A solution would be much appreciated.

  Mike

  Well I finally understood why photomerge did not work on my PEF files. Through a process of elimination, I narrowed the issue down, not a problem in photoshop or bridge, but the way I scored a record believe it or not. When I created and marked a record of a recent meeting of nipples raw files, I added a slash between the digits of the date as this 09/11/15. Once I removed the slashes that everything was back to normal photomerge was able to recognize raw PEF files in this folder.

  For some reason, the slash prevented photomerge to recognize raw files in this folder. Yet these same files could still be addressed to panorama of in camera raw. Go figure.

  I searched for the answer to this problem without success it's just by chance and a lot of reading that made me try to rename the folder up and down. I hope that this solution will help other people who may come across this problem in the future.

  Mike

• Update to Adobe Bridge CC to work with Photoshop CC 2015

  I've just updated Photoshop CC 2014 and 2015. Which works very well. I then applied the update to the bridge. Bridge will now launch fine, but when I try to open an image I get an error message saying that Windows cannot find Photoshop. The path, there need is C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit) \Photoshop.exe. It's really weird because does not point to CC Nevermind 2014 2015 CC.

  I tried to uninstall bridge via the creative cloud Panel and then a reinstall. Still the same problem. Before I updated to 2015 bridge CC worked very well with CC 2014. It is only since the update of 2015 the redone problem surface.

  Any suggestions?

  Hi Dwight,.

  I'm a Mac guy I can only give you a guess.

  Not sure what happened to cause this but one thing you might try is to go to the preferences of your Bridge and go to the file type Associations tab. Now scroll through the different types of files and select some more frequent for the PS (JPEG, TIF, etc..) Check that the track of the bird to the PS goes to the right place and if it is not reset it.

  Let us know if that does or not.

• Adobe Photoshop CC 2015 is compatible with Windows 10. The mine opens, but does not seem to work correctly... INCREDIBLY slow. Does not. Must I return to Windows 8?

  Adobe photoshop cc 2015 is compatible with windows 10? Just upgraded Windows 8 and PS opens but does not work properly. INCREDIBLY SLOW. What I can do or should I return to Windows 8? Windows love 10. Disappointed.

  Hi Ravenm,

  Could you please check and make sure that Photoshop is updated to the latest version 2015.1.2

  Also, please try the steps in the following article: Optimize performance Adobe Photoshop CC

  Let me know if it helps.

  Concerning

  Tanuj

• I've just updated to Photoshop, CC 2015.0.1, and I can't do 'Quick export in PNG' with several plans to work more? Any ideas?

  Update Photoshop CC 2015.0.1, I can do is no longer the 'Quick export in PNG' with several work plans more.

  I currently work with about 10 + work plans and I normally ' file > export > rapid export in PNG ", I had no problem in the previous version of Photoshop, but since I updated yesterday to the latest version, is no longer shows the pop-up asking where I want to save the png and instead" does nothing?

  Any ideas?

  Thank you

  Rob

  Please try and reset the default Photoshop preferences, if you do not customize your Photoshop after the last update.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• I'm a bit confused. I registered for the creative cloud this morning. The installation process has worked well.  I did Download Photoshop CC 2015 but when I lunch the program - it's just the track version... I try to activate my Adobe ID, but the

  I'm a bit confused. I registered for the creative cloud this morning. The installation process has worked well.  I did Download Photoshop CC 2015 but when I lunch the program - it's just the track version... I try to activate my Adobe ID, but the pop-up window told me, that I'm not allowed to use this program. I also did the update of the CS6, but I paid for the update and I want to use the CC2015!  Someone in the community can help me? Thanks in advance!

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• Adobe Android 5.0 CC brush works only with Illustrator and Photoshop CC 2015

  Why do I create brushes with mobile app Adobe brush CC on my Samsung Galaxy 3 with Android 5.0 doesn't work with Illustrator and Photoshop CC 2015 for OSX Imac, retina desktop application 5 k 10.10.5 Yosemite? Says: the format is not supported!

  Hi Chris,

  I said to you earlier through reactions in app. But just in case you look here first...

  None of the Adobe tools use the same rendering template, each tool has its own format of brush and the brush characteristic, so not every brush works in all applications.

  You cannot use a brush in Illustrator into Photoshop or sketch, or a drawing brush in Photoshop or Illustrator. Photoshop rendering template just can't manage that made the sketch, it works in a very different way. That's why when you create a brush brush, you must choose which tool you will target. If you are ultimate goal is to use the brushes in Ps rather than in the skit, then you need to limit yourself to the brushes Ps targeted when you get to the Style section (look for the Ps icon in the upper left section, after the Sketch in Photoshop brushes).

  When you save a brush, you are redirected to a screen (where it can be edited/nameed). This is also where you can see which brush to work with each application. The first three are sketches of Photoshop. If you scroll down you will see the brushes for PS and AI. When you save, except for the application in which you will use it. Let me know if that clears things up for you.

  Try this with one of your brushes:

  Go to your library and choose a brush

  Tap the change (square with a pen). This will open a Visual list of brushes

  If you want to use a sketch brush, choose one of these brushes (tap the circle to check), name it and save it. It will save in your library as a brush drawing, and as soon as it syncs you should be able to open in the skit. Once on the sketch, now a pressure on the fifth brush in the toolbar and your library of brushes should be there. The same process works for brushes for Photoshop and Illustrator CC.

  Let me know if you're still having problems.

  Sue.

• After downloading... photoshop cc 2015 does not open, remove the previous version, so I'm stuck with the work.

  Could someone help me please?

  Hi Sheena your indication to the forum has been decisive. Solved by installing SP1

  ..... Thank you thank you thank you

  2015-06-23 16:07 GMT + 02:00 Sheena Kaul [email protected]>:

  After downloading... photoshop cc 2015 do not open, removed the

  earlier version so I'm stuck with the work.  created by Sheena Kaul

  https://forums.Adobe.com/people/Sheena+Kaul> in * Creative cloud download

  & Install *-see complete discussion

  https://forums.Adobe.com/message/7680606#7680606>

• Update Photoshop CC 2015 and now it does not work!

  Hello

  I've been avoiding updated Photoshop CC 2015 for some time now, because I was afraid that by updating the software, I ran into the problem RIGHT I am now because I have finally given and updated.

  Photoshop CC 2015 won't work.  It starts ok, but as soon as I try and create a new document it crashes and then stops with the error message below.  It's driving me crazy because I really need the program to work!  I've updated all other programs Adobe CC I (first, After Effects, etc.) and they all work very well... it's just Photoshop that is not.  I am running Windows 7.

  Help!

  Here is the error message:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.1.2.355

  Application timestamp: 56961fa0

  Fault Module name: ig7icd64.dll

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 4f4c8e39

  Exception code: c0000005

  Exception offset: 0000000000010d8b

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: 677f

  More information 2: 677fce526d09885e3067171afff96f9b

  3 more information: a1c0

  Additional information 4: a1c07f5131c69a73494b283c2eda7b2d

  Means of ig7icd64.dll module failing it are a mistake with your Intel graphics module not PS, you need to update the site of manufacturers of windows update no.

• Action does not work in Photoshop CC 2015

  Last updated Photoshop CC 2015 / 8.1 Windows 64 bit / Core i7 3.5 / 32 gig ram

  I have a simple action to flatten an image resize, sharpen and save it that works well for a long time. Now in Photoshop CC2015 when I try to run the action I get this error message "the image to flatten command is currently unavailable" if I click on continue, the same error pops up listing the next step. Can someone explain how this happens in the clear blue sky? I rewrote the action, and the same thing happens again.

  Thank you

  Joe

  Try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  Benjamin

• Drop Shadow problem with Photoshop CC 2015

  When I batch process drop shadow actions using Photoshop CC 2015, the decline in the shadows seem to completely mess up on some images, either hardly appear or enlarge much too big.

  All images are 184 x 184 with canvas 192 x 192, the installation program the shadow effect to use the available space.  And I even returned to CS6 using for now which works very well and CC 2014 worked very well, it happens only in CC 2015.

  What is even more strange, I have manually scroll actions step by step until I get to the drop shadow error, and if I double click on the action of the shadow, it applies perfectly well. But then, when I come back and perform the action it always creates the wrong shade.

  In my view, there is a known bug with the layer effects not putting the correct numbers in situations where you copy and paste the layer styles and executing actions, as you do. If all goes well there will be a fix soon.

• Photoshop CC 2015 has stopped working

  Hello

  I have a problem which seems to be snowballing in recent times. CC2015 (trial version) does not run, it gives the error message "Photoshop CC 2015 has stopped working". This happens also with Corel Painter 2015 and a few plug-ins for Photoshop, namingly "" Topaz"Impressions" 64-bit. I'm at my wits end with this one. The common factor is that they are all graphics applications, so my research has led me to believe that there is a graphics driver issue. But I've been through as many suggested fixes as I can, including running in safe mod, etc, and nothing works. I even tried to reset the prefs CC2015 trying to load up (hold SHIFT, etc.) - but not good. Here are my specs:

  -Windows 7 Ultimate 64-bit, 16 GB of RAM

  -Motherboard: Asus Z87.-a.

  -Graphics card: integrated graphics 4600 set of drivers (the most recent version has been installed - also restored to the original shipped with the motherboard CD; drivers none of them does not work)

  (Infact, when I try to run the Intel driver update utility, the same error message and it won't work)

  -NET Framework 4.5.2 (latest version) is installed

  .. I don't know what to do at this point other that wipe out my hard drive and reinstalled Windows - something I really would rather. I have CS6 installed and it works perfectly - but it has been installed for more than a year. It seems that no recent data won't work if it's linked graphics. But my graphics drivers are current.

  Someone at - he never encountered this before?

  Good news: I have solved the problem, I hope that my solution works for everyone who is having this problem also.

  Fault Module name: MSVCR120.dll

  the name of the file above is what seemed to be planting Photoshop CC2015.

  My solution was to install Service Pack 1 for Windows 7.

  For anyone having problems with similar crash, have not installed SP1, first CC2015 to uninstall, then install SP1, and then reinstall CC2015.

  Good luck, I hope this works for others as well

• Photoshop CC 2015.5 has stopped working error

  When I try from PS I get the message "Adobe Photoshop CC 2015.5 has stopped working" no other information or number error message is presented.

  Yesterday, I upgraded to Windows Pro 10 for updates later, all the CC app to the latest version and update of Norton anti-virus and PS has worked all day.

  Today (24/09/16) I had to update Norton AntiVirus with an update that requires a restart.  I don't know if it's related to Norton (I don't) and I now GET the message that it has stopped working.

  I took the measures following, based on suggestions from the forum

  -re-installed PS

  -disabled graphics card

  -run cccleaner.exe

  s ' install sniffer.exe desktop

  -rebooted PC many times.

  -ran creative cloud as an administrator

  -Rename the file librarylookup

  -tried to start in safe mode with network

  -connected with the new user account

  Any of these would start the PS eventually.  Any suggestions?

  Have you tried disabling Norton?

  Go to the Windows search bar and type "Reliability monitor" and choose "view reliability history" (control of configuration\systeme and Security\Security and Maintenance\Reliability monitor). Find the most recent crash of Photoshop, then choose "show technical details." Copy and paste the report here in its entirety.

• Adobe Photoshop CC 2015.5 has stopped working!

  Hi friends

  I need to help you!

  Open Photoshop ok!

  Open the file and after > > Adobe Photoshop CC 2015.5 has stopped working!

  Windows 7 edition update

  HP = updated graphics = ATI Radeon 6770

  I have tried opening run as administrator. Not

  Malware. Not

  

  Thanks and greetings

  Claudio

  Hi HAL,.

  The failed module name: LavasoftTcpService64.dl

  Please see the article P Digital.Anarchy.backdrop.Designer.v1.1.for.adobe.p crashes with Lavasoft Chrome installed extension below

  Kind regards

  Assani