Similar Questions

• Pasted text does not inherit existing format

  See this screencast:

  http://screencast.com/t/ZDZkYTk3YmQt

  Isn't this awkward I am paste plain text and it does not inherit the existing format?  My experience with publishers of documents the pasted text inherits always the existing format, in that it is glued.  If you accept it, it is recorded as a bug or I'll do the honors?

  Thank you.

  Aaron

  It's a bug known, said - but thanks for the report.

• PrPro CS6 does not see model Ae incorporated in an imported video file markers

  Hello! I use Ae and Pr CS6. EI, I have a comp with markers of the model. When I visited this composition in a mp4 file, all the markers of the model are integrated successfully in there, as you can see in the attached image where I import report file in Ae. But when I import the file into the first or Prelude - none of them show these markers. I need these markers of Ae comp in first to continue working. How to transfer?

  Thank you!

  

  

  

  

  Hi X-RUST,.

  Hello! I use Ae and Pr CS6. EI, I have a comp with markers of the model. When I visited this composition in a mp4 file, all the markers of the model are integrated successfully in there, as you can see in the attached image where I import report file in Ae. But when I import the file into the first or Prelude - none of them show these markers. I need these markers of Ae comp in first to continue working. How to transfer?

  That method of markers peacekeeping does not appear to be supported: https://helpx.adobe.com/premiere-pro/using/markers.html#sharing_markers_with_after_effects _encore_and_flash

  Do not hesitate to request a feature/bug here reports: http://www.adobe.com/go/wish

  Thank you

  Kevin

• Replacement drive DVD open/close button does not reach (model HP p6110f)

  Hi all

  I replaced my DVD drive on my P6110F desktop with a model from Asus. Everything works fine * except * the fact that existing teeth of the open/close Panel button do not reach the real button on the disc itself, me leaving no option but to use a desktop widget to open the CD tray.

  I searched on the net and can't seem to find a solution. Any ideas on how to make this work? Thanks for your suggestions.

  Czar

  I had the same problem with my P6-2371ea, so what I did adjust the screw until it touches, then tighten them, if it is not an option due to too much of a gap to take the front off the PC and put a match with adhesive tape double sided on the DVD button or something similar it has worked for me in the past

• Incident rule does not for model OEM 12 c of the Golden Gate (12.1.0.5 window)

  Hi gurus,

  I practice OEM 12 c, I created Incident the rule for the target database Type that works well.

  Today morning, I created model extracted and Manager, GoldenGate and applied on the GG target, after created Incident rule with properties below

  Targets: Oracle GoldenGate. Oracle GoldenGate extract; Oracle GoldenGate Manager

  Article: incoming events and events updates

  Type: Alert metric (selected option button: all events of type alert metric)

  
  

  Add Action: Condition: always perform the actions

  Notice: E-mail me
  

  But I do not have the mail, even I kill or stop the process of mgr/extract

  When I check in the ENTERPRISE > SURVEILLANCE > INCIDENT MANAGER

  I can see the target are down and event showing her stockings.

  If someone body worked on this case. Please help me solve this problem.

  Thanks and greetings

  Jamsher Khan

  Try to use the button simulate rules in the window Incident rules.  It will show you the actions for different types of measures/events.   One thing I see here could be that the target down, will not appear in the alert metric type, this is a category of its own called target availability

• Master page text frame does not appear on the pages of the child of the master

  Why a block of text on my A-master (indicated under control) does not control the size of the blocks of text on the pages of the children of this master? Is a likely answer that I placed the text on the pages of the child until I entered the text block on the A-master. But even at this stage, when I create a new A-master, there is no block of text at all, in order to recreate and redo the problematic child pages appear not to be a solution. Thanks in advance.

  Hello

  When you click on the Plus sign next to a master page to create another master page, it does not inherit the master page objects. It simply creates an empty template. If you want the new master page to inherit the objects, then right-click on the desired master page and choose 'duplicate page.

  As child pages are concerned, Yes, they should inherit all objects and properties of the master page. It's really weird if his past is not for you. What happens when you right click on the page child and apply desired master for this menu?

  Kind regards

  Aish

• Round trip for formatting does not

  My problem is that when I open an XML file in FrameMaker, the formatting does not use my application that I put in place. I don't know where this is controlled.

  That's what I did. I made a copy of the folder Structure\xml\DITA to create Structure\xml\MyDITA. I converted my documents to DITA and updated the application model and ESD (formatting only) in the MyDITA folder. I did not the DTD.

  When I save my file in XML format I get no errors, but when I open the XML file on the FM band, the formatting does not my model of the MyDITA.

  When I open the selected file XML in FM and StructureTools > structured Application set and it has the value DITA_1.2_topic. When I put in MyDITA has no effect on the formatting.

  What is control what application to use when the XML file is opened? I have a custom XML application that works very well. The Doctype in my XML file is:

  <! Topic DOCTYPE PUBLIC "-//OASIS//DTD DITA topic / / IN" "topic.dtd".

  I hope it's an easy question to answer. Thank you!

  Gman

  HEY gman...

  Using the command set the structured Application is not "permanent", when used on an XML file. You can use it to check the application currently assigned to a file, but don't bother setting it.

  You must assign the appropriate on the open file application. This is done by ensuring that you have a valid structure for your application application definition (in the definition of Application Structure file) AND ensuring that this application definition is correctly configured in the dialog box Options of DITA (section mapping of the application). It seems that the DITA 1.2 app is still selected in the Options.

  In Options of DITA, select the "DITA v1.1" option, then click the button «...» "to the right of the associated drop-down list. In the mapping Manager dialog box, choose new mapping in the mapping of tag list, give it a name ("MyDITA 1.1 Mapping') and choose APP_MAPPING_DITA_1.1 from the mapping Type list. Now, in the mapping Manager dialog box, enter the doctype for your app... "section" (according to your example), then enter the name of the "MyDITA" application, then select the "CATEGORY" Type (in this case). Now, choose Add/Edit. If your application supports other types of items, you will need to add them to the list of mapping. When you are done click OK. Options of DITA, you can now select your application mapping in the list (or it may already be selected).

  In theory it should "work"... you will need to exit and restart FM to do properly defined.

  Yes... It is not easy or straight forward, and the docs are pretty weak.

  No pressure... but have you looked in (or heard of) DITA-FMx? It simplifies the whole process considerably (although the application development is still a bit of a learning curve) and makes DITA book.

  http://leximation.com/DITA-FMX/

  See you soon,.

  .. .Scott

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• Workflow "Add organization" does not return a vCLOUD:Organization object

  Hello everyone!

  I just started to work with Orchestrator and meet some disappoint the situation.

  When I use standard workflows 'Add an organization' (version 0.0.43) everything works well and the organization is created, but on the next step I receive no vCloud:Organization object.

  I have reproduced this standard workflow and add two lines for debugging in the last element «back organization»

  So now it has 3 rows:

  org = adminOrg.toUserObject ();

  Server.Log (org);

  System.Log (org);

  Now, if I run this double created workflow organization and I got this error:

  TypeError: Cannot find the default value for the object (Workflow: test_add_org / back Organization (item3) #1).

  Also I see tab Variables variable adminOrg is "Not found" and variable org is "undefined".

  I really want to learn how to use orchestrator and I hope that the community will help me learn how to debug these problematic situations.

  Iliann, new version of the plugin does not help.

  I realized that was a mistake. That the error on the url of the api.

  I have 2 node of vcd that I added to the plugin.

  {url} - cd1. {prefix}

  {url} - cd2. {prefix}

  Two of them have been published on lbs - {url}. {prefix} and this address is registered at home as a path to the API.

  So, when I add just a URL {}. {prefix} to the configuration of the plugin and use it in the workflow - everything works fine.

  Sorry, that trigger the buzz around workflow. But they are exceptions and really not clear errors.

  And Iliann thanks for the help and for your advice and guidance to the newspapers.

• vCloud add a Workflow network card does not have a mac address

  Good day to all,

  I'm trying to add a network adapter to a vCenter orchestrator vcloud vm by using the built-in workflow, however it does not generate a mac address on the new network adapter. Does anyone know if I need to run another method in order to generate the MAC?

  It is a strange question. You must report this to the GSS so this can be checked / fixed.

  In the meantime, you can try this in an action in return for a vcloud:Task:

  vm.updateInternalState();
  var networkConnectionSection = vm.getNetworkConnectionSection();
  var networkConnections = networkConnectionSection.networkConnection.enumerate();
  
  if (networkConnections.length == 0) throw "No network connection for this VM";
  //System.log("previous Mac was " +  networkConnections[0].mACAddress);
  networkConnections[0].mACAddress = null;
  networkConnectionSection.networkConnection.remove(0);
  networkConnectionSection.networkConnection.add(networkConnections[0]);
  return vm.updateSection(networkConnectionSection);
  

  Christophe.

• E-mail notification of workflow does not

  Hello

  We need to inform all users of the workflow. There is no 'NotifyAllParticipants' in Admin-> Actions-> Actions step workflow. But users don't receive any notification by email.

  Is there a required configuration?

  We tried to modify the futuretense.ini also, but it still does not work.

  Any help in this matter is appreciated.

  Thank you!

  Hello

  I tried this in my local machine and am able to send the notification to the participants (users).

  Check if you set the following properties.

  First of all:

  In futuretense_xcel.ini file set xcelerate.emailnotification = true.

  Second:

  Set the following properties in the futuretense.ini file.

  DSI EmailAccount = specifies the user account name that you want to use for outgoing mail. Is the name of the account (just the username) on the SMTP server.

  CS.emailpassword = specifies the password for the e-mail account used by the WebCenter Sites (specified by cs.emailaccount above property).

  DSI EmailHost = defines the host SMTP (mail server) which is used by the servlet ContentServer to create and deliver e-mail messages.

  CS.emailreturnto is specified, the e-mail address from which mail is sent to all participants in the workflow.

  Note: by setting the properties make sure that 'no. spaces' before and after the value.

  If above properties are set correctly, still no mail. Thanks for upload your Sites.Log.

  Please let me know if you have any questions.

  Kind regards

  Delphine Pilli.

• Notification message by e-mail message workflow does not work

  Hello
  
  
  We are implementing "workflow" for approval in h when I get the mail notification of workflow, I get error instead of the message below:
  
  
  Error
  
  You have enough privileges for the operation. Please contact your system administrator.
  
  I also tried the metalink # 372493.1 note, but that also does not work.
  
  What can be the reason?
  
  Grateful if someone can help.
  
  Thank you
  CAH

  PL post Details of the operating system, database and versions EBS. You can reproduce this mistake systematically? I assume you mean that you get this message when you click the email notification. If so, pl see if these MOS Docs can help you

  Workflow notifications: you have enough privileges for the operation in progress (Doc ID 445170.1)
  WF MAILER: "you have insufficient privileges for the current operation" (Doc ID 1071894.1)
  "You have enough privileges for the operation" on Reqapprv Notif (Doc ID 414376.1)

  HTH
  Srini

• Configuration of the workflow for the warehouse does not work

  Hello
  I m trying to create a workflow for a data warehouse, but for that I need to set it up.
  When you go to the Workflow Configuration Wizard, it does not work. any idea?

  Be a little more specific. What is the error you get?

• vCAC 6.0 selected clone - model Action Plan has been updated, now, it does not appear in the vCAC

  Hi all

  I have been playing with vCAC 6.0 for quite awhile (now updated vCAC 6.0.1) and have created a plan that will clone with Windows Server R2 model 2012. Comments agent has not been installed because I wanted only to lift the machine up and running with customization specifications created in vCenter.

  The plan was working as expected after I created the service, part of the catalogue and clearances. After that, I converted the virtual computer model to update the model with new Windows patches, and then convert back to model. Now when I try to create a new master plan, selected the workflow of clone and search for the model, the model that I've updated does not exist in the list. Curious, too, I went to change the blueprint and attempted to review for the model, and it does not appear on the list more. In fact, I created a model of linux (CentOS) at some point after the installation of the vCAC, and I don't see the list as well.

  
  

  No idea on what is happening? Newspapers in the Infrastructure tab-> monitoring-> Log was not showing errors, and I tried to restart all the components of vCAC, including a restart of all services on the server of IaaS.

  Probably, you have to manually kick off the collection of inventory data on computing resources where the model.

• Wrong try again Workflow activities

  Hello
  
  2 questions:
  
  (a) if I run the "Retry Errored Workflow activities" program, will be forcefully advance blocked even if the reason for the error has not been taken care of? Otherwise, it throws another error?
  
  (b) an order set up, if one of the lines is in error, will be all of the stuck lines? I'm sure they will, however, I wanted to just a confirmation.
  
  Thank you!

  (a) if the error is not supported, the line will not advance.
  (b) all lines in this configuration remains stuck.

  Hope this helps
  Sandeep Gandhi
  Independent consultant

• iPhone 6s does not 'AirPlay' 07 model Apple TV, why?

  iPhone 6s does not 'AirPlay' 07 model Apple TV? Why?

  PS Both connected to the same network

  Apple TV 1 models did not support Airplay.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support