Each file shows '?', which means 'the item is not found.

Similar Questions

• Find out the window of the item was not found when click on the button in the toolbar.

  Hello!
  I use RH8.
  I use the small button of glasses 'Display the item' in the toolbar of the project all the time because I have problems with gaps around "BOLD" characters.
  All of a sudden, when I click on show the item opens the window is no longer and I don't see what the subject really looks like unless I have compile and view it.
  When I click the button I see iin 'Fact' the status bar. So I guess that the window is there somewhere.
  The button show the item was working at the same time.
  I still have 1 million windows open when I'm working and I slide around. I think I finger-checked and hid the window or made very small and I just can't do.
  Here's what I've tried...
  Closed all my windows and then tried Cascade Windows.
  Tried to reset the toolbar to find. I also tried to do a ctrl-w. Opens the window menu to see if I could activate it from there, but it was not listed. I saw that the tabs I had open at the time.
  Try closing and opening of the HR.
  No luck. I really need the window display the rear element!
  Anyone have any suggestions? Is there somewhere in the HR GUI where the window can hide?
  Thank you!
  Deb
  
  

  Hi Deb, see if these discussions helps:

  Thread 1
  If this does not work: 2 wire

  -Ben

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• Y at - it a keyboard shortcut, which moves the item target upward and down channels?

  Y at - it a keyboard shortcut, which moves the item target upward and down channels?

  Open KBSC and type UP (or DOWN) in the search.

• 14 Photoshop. I'm trying to merge (do a panorama) 2 photos.  The 'automation tools are grayed out', which means that I can not select this option.

  I just upgraded from photoshop 10 to 14. I'm trying to merge (do a panorama) 2 photos.  It was very fast and easy in Photoshop 10.  In photoshop 14 the 'automation tools are grayed out', which means that I can not select this option.  I do something wrong or my installation does not work?

  In the 14 PES Editor, adobe has moved the Photomerge features to guided.

  Photoshop elements help | What's new in Photoshop elements 14

  Photoshop elements help | Guided - mode Photomerge edits

• Try to download firefox beta on Sony Ericsson X 10 reveals the message "the requested item is not found. What can be the problem?

  I try to download and install Firefox beta 3 for Android 2.3 on Sony Ericsson X 10. I am able to access the site of the Chamber of combustion/m well but when to download, I get the error message "not found - the requested item is not found."

  The link to download Firefox for the Android Market does not work on phones with incompatible equipment. You can check if your phone is compatible here:

  https://wiki.Mozilla.org/mobile/platforms/Android

  Even on some devices supported, a bug in the software of the market prevents Firefox from appearing. This may be linked to the fairly recent Android Market app update. If you go to settings/Applications/market and choose "Uninstall" you can uninstall the update and then seek out and install Firefox on the market.

  Or, if you have a compatible phone, you can download the application directly from here:

  http://FTP.Mozilla.org/pub/mozilla.org/Mobile/Releases/4.0b3/Android-R7/multi/

  (Note: to download the app directly to an AT & T phone, you will have to search for 'sideloading' instructions in the APK file, because AT & T disables the option to install non-market sources.)

• When I look for a file in Win Explorer, I get a list of files in the search results. But some of the files seem to be missing. I get a message that the directory is not found when I try to open the search results.

  I wonder if what's on my hard drive and if what Win Explorer is on my hard drive are two different things.

  If I do a search in Win Explorer to "purple", I get a number of results.
  (To search for a file, I am in the word "Purple" in the search field in the upper right Win Explorer and pressing the "Enter" button).

  There are a couple of JPG files that I wonder about the search results.
  One example is called "purple_flowers.jpg".
  When I double-click this file in the search results to open it, my paint program opens and gives me a message that the directory is not found. If I use MS Paint to try and open it by double-clicking on the file and selecting "open with...". MS Paint", I get a message that the directory is not valid.

  The location of the directory on the error message is the blue 'Images' folder for my user. But, when I opened this file, I don't have a file with that name in this directory. The same thing happens with another JPG file, called "octopus.jpg" when I search the word 'Octopus '.

  Is this something messed up between what I have on my hard drive and think what Win Explorer is on my hard drive?
  How can I fix?
  Something must be reset in Win Explorer?

  I could have the JPG files with these names at the same time. I had a large library of images for a project, but I deleted it.
  (I tried to turn on the option to show hidden files in this directory, but that did not help).

  Imane:

  I thank very you much for that answer.
  But it seems to have stumbled on the solution:

  Strangely, this worked:

  (Maybe you know why).

  I moved the files in my blue images folder in another folder, delete the folder images blue, emptied the Recycle Bin and rebooted my computer.
   
  When my computer has finished its startup routines, my folder of photos blue was there! And he had the shortcut to the folder 'Sample Pictures' inside.
   
  When I searched "the Octopus" and "purple", I no longer saw these JPG files in the search results.
   
  I don't really know what happened, but I thought that after these results just in case someone else knows this.

  I'll read and watch in your information. I don't want to know more about what is happening in my computer.

  Marz

• Error when the appellation newly created folder: this item is not found

  Hello

  I found the thread when people are struggling to remove the folder.  However, I have the opposite problem.

  When I create a new folder, type to replace the name "New folder" and then on enter, I get this error:

  This item is not found

  It is no longer in C:\folder1\folder2.  Check the location of the item and try again.

  Two options: retry and cancel.

  I did Try Again and it works.

  How can I fix it?

  Thank you

  Found the thread with replies

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9?page=1

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Why my .jpg files open more.  The message is not supported or damaged in any way?

  Why my .jpg files open more.  The message is not supported or damaged.

  It depends on what you normally do with the latter. JPG files.  If you just want to view them, Photo Viewer Windows is fine.  If you want to change, then you will need to assign to a program on your computer of image editing.

  If you open them normally with Photo Viewer, but sometimes want to change, then you can right click on the file and then select open with...

  To change the association of file on Windows see http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

• "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

  I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

  I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

  I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

  "Method 1:

  To resolve this problem in Internet Explorer, follow these steps:

  a. Quit all programs that are running.

  b. Click Start and then click Run.

  c. type regsvr32 urlmon.dll, and then click OK.

  d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

  ('DllRegisterServer in urlmon.dll' received successful)

  If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

  ·         Shdocvw.dll (failed)

  ·         Actxprxy.dll (failed)

  ·         Oleaut32.dll (failed)

  ·         Mshtml.dll (received no response)

  ·         Browseui.dll (failed)

  ·         Shell32.dll (managed)

  Method (step 2):

  I suggest you to start in safe mode and test the question.

  Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Method (step 3):

  I suggest you perform a SFC Scan and check if it helps.

  The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

  (SFC Scan completed successfully)

  Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

  DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

  http://1drv.Ms/11PQ3dm

  I hope this will help you to find me a solution to my problem.

  First of all lets run a startup repair.

  This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

  After return from the logs generated.

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

• I can not even open FF because the profile is not found, even after using the profile in order to create a new profile.

  I've recently upgraded to version 40 39.0.3. The first upgrade was not so I removed FF using the control panel (uninstall program). I reinstalled again, but I got the messages that FF was already running, etc. as other users have noticed. I open profiles (Open firefox.exe - p) and tried to open FF with the "default" profile that did not work. I created a new profile ("defaultuser") and FF open. (I have the box checked to use the new profile on startup). I have created FF as I wanted it, and then exit. When I started later FF, the profile is not found. The profile did not have the "defaultuser" profile, does not open with the "default" profile, but would a new profile must be created and FF to open and run. Quit FF and reopen produces the same sequence (profile not found, etc.) I uninstalled 40 and reinstalled version 39.0.3 and I have the same problems with this version (39.0.3), plus he's starting the upgrade to version 40, and soon as I complete the installation again. I uninstalled the 39.0.3/40 version and reinstalled 40 using the Profiles page to write this question.

  I removed the version FF 40 using the Panel of control/uninstall. I deleted all the files that have been "* firefox *" and "* mozilla * ' (and there are some). I rebooted, and then reinstalled FF version 39.0.3. I could we FF immediately (without having to create a new profile). I have not had any problems with a bad certificate of Google, Yahoo, etc.. I went to all the web sites open very well. I could restart, then restart FF several times without problems or issues of certificate. Meanwhile, I made no changes to Kaspersky, and as far as I know, Kaspersky works as he usually does. I am almost sure that FF 40 version has a certificate problem that I can't fix. I'm less sure if the original upgrade to version FF 39.0.3 to 40.0.0 (then 40.0.2) played a role in my profile questions. Regardless, I have a version of FF that works and auto-updated to FF is off (and it will remain like that until I gather a few of this blog and other insurance which emits 40 FF are ironed out). I appreciate the help that you (and jscher200 in another thread) has attempted to provide. While the issues are not fixed, the thread can be closed.

• Item was not found. 0 X 80070490 (WIN32: 1168)

  Greetings,

  I received this error message after I watched the .req file that was published by the visual svn file. This is intended to create a certificate. I used the preparation by the visualsvn certificate request tool. And then filled the queries inside the .req file, and then save.

  After that, I ran the certreq.exe administrator and travelled to the published .req file. After pressing enter or open this message appears

  ---------------------------
  Certificate request processor
  ---------------------------
  Item was not found. 0 X 80070490 (WIN32: 1168)
  ---------------------------
  Ok
  ---------------------------
  I'm on the wrong track here?

  What exactly are the steps you perform to get / reproduce the error?

  I see you want to sign the certificate using Active Directory Certificate Services. However, it seems that you don't have the Services of certificate AD deployed in your environment.

• I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

  Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

  Assoc .exe = exefile

  Assoc .lnk = lnkfile

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

  I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

  Jim

  You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

  If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

  MowGreen Services update - consumer safety