PRE10 project burn as blu - ray but will not burn on DVD.

Similar Questions

• Blu Ray player can not read the DVD. It can read CDs and Blu Ray discs, but not DVD.

  Recently, I lost my hard drive.  Dell sent me a new disk with the drivers that came with the computer.

  I just noticed that my Blu Ray player is no longer playing DVDs.  I don't know if the hard drive crash has nothing to do with it, or if it's a coincidence.

  Windows says I have the latest driver.

  The computer is a Dell XPS 8300.   Is the Blu Ray player: bd - re bh30n hl-dt-st.

  The player has not served almost at all.   I read that there are the eyes for the Blu Ray vs DVD, then maybe the DVD part has failed.

  I'm always suspect that miss me a piece of software or a changed value.

  Any ideas?

  For all of you, the poor souls who shared my problem on the internet, I got beyond that.   Even though all said I had the latest driver, I found someone who said that they had downloaded a newer driver form the LG site and it fixed the problem.   Well, BH30N wasn't a model # on the LG site, but I found here: http://www.firmwarehq.com/download_1703-file_BH30N-A103.zip.html Norton said it was OK, I clicked on the EXE file, he said that he had me upgrade from A101 to A103 and suggested that I reload.   Once I did, my Blu Ray player will read the DVD fine.

• Blu - ray disc will not play with Windows 7 installed on the computer hp laptop pavilion g6

  Although the non - Blu Ray discs play fine on my HP Pavilion laptop with Windows 7, discs Blu Ray will not be. How a computer model does this work?

  Hi, John:

  It's the hard drive.

  You need to go to Device Manager, and then click to expand the category of DC/DVD player.

  If the name of the dvd player does not have a BD in the model, it is just a standard dvd player and cannot play blue ray discs.

• Re: Blu Ray drive will not play Blu Ray

  Hello world

  I bought a HP Pavilion Slimline s5395a, with a blu - ray player. However when I tried to play Harry Potter and the relics of death part 1 blu ray using HP mediasmart dvd, he came with a message saying you want to search for updates. If I pressed no or Yes, nothing happens. I also tried to reinstall it to no luck and go to the settings icon on the bottom of program updates, where there is a critical update available, but nothing happens when I try to download it. Hope you can help me with this.

  Thanks, Luke

  Hi Luke,.

  This assumes that you are running Windows 7.

  Download and install Revo Uninstaller from the link below.

  http://www.revouninstaller.com/download-freeware-version.php

  Run revo and use it to uninstall your HP MediaSmart DVD software.  Make a right click on the program icon you want to remove and select uninstall.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once the uninstall is complete, reboot the PC.

  Then, download the latest installer for MediaSmart DVD on the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50935.exe

  If you do not have an extraction utility installed, download and install 7-Zip.  Right click on the installation program you download, select Extract 7 - Zip, select the files, and then click Ok.  Open the newly extracted folder, open src and scroll down until you see the application setup ( 6th in the background with a size of 310 KB ).  This Application Configuration right click and select "Run as Administrator" to launch the installation.  Once the installation is complete, restart the computer and see if you can now read your Blu - ray discs.

  Kind regards

  DP - K

• My Windows 7 will play a DVD, but will not play the DVD-ROM of the drive section.

  I can play a DVD movie disc, but when I get to the DVD-ROM portion of the disc I can not get this article to play.  Any suggestions?  I have Windows 7.

  It happens within WMC only? Have you tried the same thing with VLC Player?

• I bought an album and it shows in iTunes, but will not let me burn to disc

  I have a 6splus iphone I bought an album on my music and it shows in my lap top and plays ituneson but will not let me burn to disc says its icloud in music? and download to pc? Help

  < re-titled by host >

  In iTunes, go to view > show iCloud music purchases. If the cloud beside her icon, click on this icon and download on your computer.

• Chapters change in the preview, but will not change after burning disc.

  When making a DVD with separate playlists chapter by chapter,-"project and an overview of the work" works perfectly.

  However, when the disc is in the drive at the time the arrow will hit the second button, playback begins immediately and when

  finished, he returned to the menu chapter as planned, but will not move past the second button to play anything.

  Is this something I'm doing wrong or the submenu would be defective?

  Select the menu (not a button), departed 'auto routing', then drag it as you wish.

  If the buttons are in good condition, you can use the automatic routing. If it's the only button behave strangely, I would just do the manual setting.

• I have Windows 7 I can't get one say Blu Ray to play with HP MediaSmart DVD.

  I have a Pavilion DV7, but I don't have any idea of other number that you want.  I can't find another number from anywhere.  The problem is with the HP MediaSmart DVD player.  It will not play a Blu Ray disc.  It will load then wants to do an upgrade.  However it won't do it.  I have open the setting and try to update manually.  It shows not anyupdates.  How can I get Blu Ray to play once AGAIN.  I have Windows 7 Pro.  The version of the MediaSmart drive is 4.2.2.5122

  Hello

  As you use HP MediaSmart DVD to play Blu ray discs, I would suggest trying the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu ray disks will now play OK.

  Kind regards

  DP - K

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• HP Pavilion dv6-3259wm: CD / Blu - ray player does not open / working properly

  My CD / Blu - ray player does not open. I can force it with a paper clip and put in a disk in this way, but it does not turn on and play the disc. The drive does not appear as a file selection as part of my hard disks in my computer section.

  With that I guess my optical drive is broken, so I tried looking for a replacement. I looked up the name of the optical drive in the HP PartSurfer and he says it's called SPS - DRV DVD SATA BD Combo 12.7. Just to make sure, is this the right part I'm looking for? If so and say that I should go ahead and order this part, how do I go about removal of the optical drive in my labtop and its replacement by the new drive?

  Hello

  Yes... It is the right part for your laptop.

  HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001

  You can follow the instructions from the links below:

  Removing and replacing the CD/DVD drive

  Or,

  HP Pavilion dv6 Entertainment PC - Maintenance and Service of Guide

• VAIO F Series 3d - Blue Ray 3d does not work

  Hello

  I just got the laptop Vaio Fseries 3D and when I tried to play Blue Ray 3d Disney's "Tangled". corel DVD player - the image is pixelated and the noise we very nervous. I tried to adjust the parameters of performance and 3d setting, but does not work.

  Does anyone else have this problem? Help, please!

  
  

• Cannot open my emails. they are there but will not open

  I can access my screen page.but I click on email address and it goes blue but will not open.down in the left hand corner it displays http://sn 127w.snt127.mail.live.com/mail/#

  Hi ronaldorser,
   
  As this problem is specific to Live mail, I recommend you to post your query in the instances of Windows Live Mail for assistance on this issue.

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Firefox shows upwards on the taskbar but will not maximize when clicking on window

  I tried re installation, but when I click the icon it will appear on the taskbar but will not maximize.

  It is a more detailed explanation of the above.

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or Windows 8.1 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• I tried to make a donation of $20, but will not accept your use of my personal details according to the rules of confidentiality year so my 20 bucks always in my pocket... what to do?

  tried to make a donation of $20, but will not accept your use of my personal details according to the rules of confidentiality year so my 20 bucks always in my pocket... what to do?

  Hello onjay, what is the part that bothers you? There are also several other ways to donate to mozilla than to go through the donation form: https://wiki.mozilla.org/Ways_to_Give

  and of course there are also non-financial ways you can contribute to mozilla:
  https://www.Mozilla.org/contribute/