Working with multichannel sound in hearing

I am fighting to get my head around what appears to be a multi-channel workflow rather restrictive in Adobe Audition (CC2015). I produce a soundtrack multichannel for a film, which in this case is likely to end up as 5.1, but I'm also going to require stereo mixes. I also sometimes works in other multichannel formats as standard 5.1 - so sometimes I produce compositions in 8 channels for example.

Hearing seems to allow the outputs Master to put in place such as mono, stereo or 5.1, when you create a new sequence. This cannot be changed after the fact at all. With the output value Master 5.1, the individual titles in the multitrack session have miners instead surround sound stereo Pan controls. For this reason, it seems to me very tedious to produce a stereo mix of a project built in 5.1 - because I really want to use a traditional stereo miners when mixing in stereo (of course, you can assign sounds to the left and right speakers only with the surround panner, but the surround panner is not simplicity and ease of use of a traditional pan for a stereo mixer designed for 5.1).

Also, I started often 5.1 mixes by building my calendar first in stereo, before later "extrusion" my stereo composition in a field surround sound.

Further on the issue, I often make you use the two miners stereo and surround sound miners of the same project, depending on where I want to put a sound in multi-channel and what kind of movements in space may be required. It seems to me that you can work with one or the other in a multitrack project, I'm good?

The best compromise I can find at the moment involves the implementation of new sequences with the stereo master outputs but creation then bus to L, R, C, Ls, and Rs (if I wanted to produce stereo and 5.1 mixes). At the mix to the forefront, I think you can export each bus independently, so it's a way to get a multi-channel output (exporting stems for each channel bus) exported from a multitrack stereo project.

The Audition Installer seems to make these workflow of stereo stereo - multichannel - very difficult, and I was wondering has anyone found ways to work around that? As is - this something that could be dealt with in future updates of the program? I worked for years in Logic Pro and this type of workflow is easy to achieve.

Thanks for your response-

""I don't know if it will help, but if direct you the output of a track of output rather than the 5.1 master stereo panning and then converted to a standard stereo one.".

Contributing to a Yes measure - on the work plan a stereo mix of a session multitrack 5.1. Right now I'm working around the problem by setting up projects stereo and then bus within this project - a mono for the C bus, stereo for LR and then a stereo bus DSL. It is not ideal, but it works. This implementation of the bus for the outputs discrete also works for me if I brought to dial in for example a multi-channel space of 8 channels, but what I do have with this method is a master fader (and meters) for the whole of the bus.

"Also in the Surround panner, you can activate the destination off by clicking in the C. Ls and Rs boxes so that the letters light up blue white inxtead." "The Pan then moves only outputs through the normal stereo field"

Yes, I played with it for a while but the control is not the same - it is complicated by the presence of RADIUS, angle etc, so you know exactly what she is doing in comparison to simple pan pot from left to the right balance. I understand the same thing could theoretically be achieved, but I find it needlessly tedious to do what can be done with a pot of pan.

See you soon

Tags: Audition

Similar Questions

  • I would like to know, if the first 14 elements still work with Smart Sound? Thanks for a response!

    Hello, I love to give the music to my videos with Smart Sound Sonicfire. It works perfect in first 11 elements. So before buying 14 items first, I would like to know, if this still works with Smart Sound.

    Sorry for my bad English!

    First 14 elements has no interface directly with SmartSound, like older versions of the program. The program now includes Scores, that is Adobe tool for the creation of custom music titles.

    However, if you copy a piece of music for SonicFire as a WAV, you will be able to import that WAV in your Premiere Elements project.

  • Its exterior (my headphones) no longer works with premiere pro. Only the internal speakers in the mac.

    So, I love working with the sound in my headset when I am doing a project in first pro.

    Now, the blurry part is that speakers headphones does not work with premiere pro and first pro only? Another sound source is working with my helmet when I am setting the sound on the mac or play music. But when I press the play button on my premiere pro project, the sound comes from the speakers internal mac.

    I have no idea what is wrong, I tried two different helmets, but it does not help.

    UPDATE

    Solved the problem! But if someone gets the same problem, I had just went preference-audio output mapping and then you choose your sound source.

  • I am tring to install the Manager of multichannel sound, which is on XP Home, in a laptop with windows Vista. and can't seem to make it work. Can anyone help?

    Manager of multichannel sound from / to windows XP Home Edition. Installed on Vista.

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    If this is not Vista compatible, read the info on the link above.
    It works for some programs, but not all.

    This applies to software programs, NOT hardware drivers.

    If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

    If the above fix, try the Vista programs Forum:

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • Equium P300: no sound from speakers but work with headphones

    The speakers on my P300 Equium seem to have stopped working?
    I checked the card its an all and them seem to no errors.

    Sound bar at the bottom right to move as it should when I play music, but it just doesn't come out of the speakers.
    However, it does work with headphones.

    Any ideas on how to solve the problem?

    Hello

    Hmm. You can hear the sound using headphones but you can't hear speakers that well it looks really a speaker problem, but it s really strange that both speakers are dead at the same time

    In your case I would remove the sound card driver and would update with that of the European driver Toshiba page.
    Check what's happening after the update

  • Sound does not work with headphones

    I have to attend an online presentation. We have checked all the settings of the sound card, but all I can do with my helmet is talk, but I can't hear anything in my headset if someone speaks. I need to first unplug the headphones to hear anything in the boxes of two speakers. I bought a new headset, but that did not help. I was looking for some drivers etc but can't find anything. Anyone know what I need to do to talk and hear the other participants at the same time with my helmet?

    Thank you very much

    Nicci

    Hello Nicci

    You already end solution? I put t know which model of laptop, you have, but they all work on the same path. Please check the volume control if it has disabled mute box (control volume and waves).

    In device manager there is no problem with the sound card, it should work properly. Check please properties of sound and Audio devices in Control Panel. I'm sure that some settings is not set correctly.

  • Audio sounds bad after having worked with her

    I used to use Audacity for my voice recordings and working with the audio seemed to work fine, but now, when I work with the hearing, as I work with audio (noise suppression and compression), voice ends up sounding terrible, and sometimes the audio can get rough. I record with a blue Yeti Pro, if that helps. I just started using the program, I appreciate all the help I can get.

    To be effective, it is best to have background noise less than or equal to-42dB and song about riding 15/18 dB to get this clear separation expected of a piece.

    Look for the two second minimum deviation during your record that has just the inside noise in order to capture a sample (right click, print capture noise).  I usually record 10 seconds of the ambience of the rooms just for that purpose.

    Much will depend on your initial capture and settings will vary, and while the example below is a good starting point for tweaking from there

    It is preferable that you plan to use a log curve and add points of outline trace noise print to follow.

    Loosen reduction settings and use a small number of smoothing and transition width to avoid burrs survey results / aqueous or metal.

    As mentioned SteveG, using multiple passes in subtle steps works for many.  Experiment and let your ears guide you.

    Depending on the situation, its best, leaving a slight noise in and then try to delete everything and may degrade the singing or the creation of unnatural sound, abrupt transitions from the ground to the voice.

    Especially if you are going to mix in a bed of music or winds the end result as a file compressed on the net and that little extra effort is lost anyway.

  • The NI9423 will work with Sound and Vibration VI

    Will be that the NI 9423 mounted on a chassis cRIO work with the NO audio and vibration of VI?

    I have an optical encoder of 10-30 V 100 pulses/revolution and would like to make angle field order analysis with her.

    is the NI9423 a card appropriate for this purpose or is something else better suited, I'm open to change the type of encoder if necessary.

    Hi Bodger

    How fast do you think the tree to turn to? The speed of switching module is able to pass to the 1uS extremely quickly. This means that you should be fine unless you are turning the tree at a ridiculously fast speed of approximately 600000 RPM.

    Regarding the reading of signals with the sound and vibration screw, you should be able to do this using the digital tachometer functions.

    Thank you very much

    Dan.H

    NIUK Applications Engineering

  • Impossible to get a sound, message no Audio output device is installed, download message that some adapters do not work with error 31.

    Original title: get a message "No Audio output device is installed".

    Worked very much later than last night - pop up on the taskbar during the night - had earlier this week, but a reboot can fix this - now stuck - Machine is HP Pavilion dv2736us - I tried to reload the sound driver from the HP site - says NO Available MEDIA - device also device manager says 6TO4 and a bunch of other "adapters" works do not (Code 31) - is this a MS or HP problem? -Help appreciated - Tks - has

    Hello

    1 did you do changes on the computer before the show?

    2. What are the other devices for which you receive the error code 31?

    Addressing the issue with the sound:

    Method 1:

    See the site:

    Error in Vista: No Audio output device is installed

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01695430&cc=us&LC=en

    Deal with the issue with message on 6T 04:

    Method 2: Update the wireless drivers

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

     

    Method 3: Install the latest drivers wireless

    You can get the latest driver wireless on the site:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3650837

    If the problem persists, I suggest you obtain help on the site of HP support forum: http://h30434.www3.hp.com/t5/Notebook-Computers/ct-p/Notebook

  • Manager of multichannel sound on windows XP desktop. Tring to install on laptop with windows Vista.

    Manager of multichannel sound.  This program is not a windows product?

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistamedia/threads

    Manage your music and other sounds: stream audio, burn, rip and more.

    They will help you in the music of Vista and its Forum above.

    See you soon. Mick Murphy - Microsoft partner

  • integrated sound card does not work with windows7

    Hello!
    I have the following and problem that you have not yet found a solution.
    I have a very old pc with a gigabyte GA-8I915P Duo Pro with integrated sound card (c-media 9880).
    I recently installed Windows 7 and it does not start the sound card... (everything else works perfectly fine)
    Please could someone tell me were to find the drivers for the card (gigabyte or c-media have win 7 drivers for my card) or what else to do?
    THX

    See http://www.sevenforums.com/sound-audio/26835-c-media-9880-driver-windows-7-a.html

    If drivers intended it work do not, you will need to install a sound card.

  • Problems with my sound doesn't play not even though the settings say that the audio does not work properly

    recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work.  I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found.  So I restored by computer back to before I left on vacation, but still no sound.  No pop up with the dll is not found though.  I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance.  said the task of event 20 116.  I have an ACER one with windows. the computer has HDMI dolby and realtek.

    -
    -
     
      20
      0
      4
      116
      0
      0 x 800000000000000
     
      3490
     
     
      Microsoft-Windows-Audio/PlaybackManager
      LorrainesPC
     
     

    -
      3
      48000
      fake
     

     

    Judy Hello,

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.

    Certainly, I understand your concern and will try my best to help you.

    I appreciate all your efforts really to try to solve this problem.

    This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

    I would suggest trying the following methods and check if that helps.

    Method 1:

    I suggest you to refer to the procedure described in the article below and check if it helps.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

    Also try to install the latest drivers from the chipset in the system and check if it helps.

    If the problem persists, follow method 2

    Method 2:

    How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • Windows 8 Pro update replaces Conextant sound installed with a sound THAT DOES NOT WORK Microsoft! How do you get the Conextant reinstall

    Installed Win 8 Pro on a Lenovo ThinkPad (SL500) #2746BKU with Vista.    Everything seems to work, but no sound except unplug the power Pak.  I downloaded all driver Conextant kits & Microsofts drivers without result.  When you check the Device Manager it shows a Microsoft sound in the SOUND VIDEO AND GAME CONTROLLERS properties.  The two see the Lenovo & Microsoft Research unanswered who worked.  Under speaker system it shows no driver installed BUT THAT WORKS WITH a BEEP when you start the machine.

    HAS ANYONE FIGURED THIS OUT?  I downloaded & installed large files that don't work.  8 win changed the name of the sound chip Conextant to a manufacturer of Microsoft.  So when you try to install the drivers conextant he can't find it.  If you uninstall it still can't find it because that win 8 it changed a Microsoft legacy.

    Help I sold it but not without noise.

    Hello

    Try to uninstall the Microsoft drivers and resettlement the Conextant...

    While you are in Device Manager try to disable the device, restart, then try Conextant drivers...

    I don't know that win 8 has actually changed your device. First of all, it is not physically possible to

    'replace it with one made by Microsoft', but he might have changed its identifier...

    I think that what you see is a VIRTUAL Microsoft device... My machine has one of these...

    A normal RealTek audio chip and an imaginary Microsoft chip. lack of a better description.

    Probably your Conextant is simply not appear, what makes things appear weird...

    Try to install your Conextant in Compatibility Mode drivers\software, or right click on the installer and select troubleshoot compatibility...

  • Problem with the sounds and animations working together...

    Hi all

    I learned how to use Adobe InDesign recently (as in...) Today).  I adapt well to the format after only a few hundred moments of pulling hair.  I create an interactive document and there is a place where I want an animation and sound to play at the same time when you hover over this task.  I figured out how to add a button to the region and I used that to the sound.  Then I discovered that I could add an animation to the button as well.  However, when the button is hovered over, the sound is played, and then, once it's done, the animation occurs.  I discovered that if I put first animation online, then the opposite is true.  I get the animation, then the sound.  I need them to play at the same time as the sound IS the sound effect for the animation.  SOOOO... I tried to put the two buttons, two of them wired to turn off when you move the cursor over them, but that didn't work.  All I get is any button is on top.  They are not both work with a hover.  Is there a way to make the sound and animation to play together, in the sink with the other?

    You will see your animation and sound in the distribution panel. Shift-click to activate both and click play together on the bottom of the Panel.

  • iTunes 12 sound does not work with ac3 passthrough

    I have an Intel DX79/Xeon 2, CPU 0GHa with a NVidia GTX680 graphics card.

    I use an HDMI output directly to a Denon surround amplifier. Everything had been working well for a few years but recently I reinstalled Windows 8.1 and I found the passage of in surround AC3 stopped working with iTunes.  Movies of the source that I use have 5.1 channels and used to work.  Nothing the silence I fear when "Prefer AC3" is now selected.   The material has not changed - just a re-installation of Windows with the latest version of iTunes 8.1 and NVidia version 359.06.  The installation is completely vanilla flavored outside these two packages being installed.

    So, I added PowerDVD and tested with a couple of BluRay discs.

    PowerDVD works well with AC3 pass by - the problem seems to be limited to iTunes.  Stereo mode in iTunes works fine.  I tried the "Old video card" version iTunes without success and I tried without downgrading the video version card / audio driver for NVidia 344.75 (a version I know that used to work for about a year back) all to nothing does not).  I also tried version 12 iTunes and encountered exactly the same problem. I think that maybe iTunes and the driver NVidia do not play well together.  All the world is this problem?  I tried to contact Apple support, but it generates an error with a hexadecimal error code large enough and said "try again later...". ', Useful suggestions are welcome!

    Hey there,

    I just saw your post - I had the same problem and posted my fixed on a different thread, here: AC3 Passthrough works does not in 10 - bug and workaround windows

    I hope this works for you

Maybe you are looking for