XControls: Options for change "Unique identifier" and the "localized name Long' properties has disappeared

Similar Questions

• Change the default profile for networks not identified in the register.

  Hi, I recently installed a copy of Windows 7 Home Premium. Recently, I tried to share files on a network computer to computer without router. I ran into problems with this, however, because Windows will just recognized here a network not identified, set its profile to the public and turn off sharing. I am aware that the default profile is editable through the local security policy editor, but being on the House, I am unable to access it, so my question is this:

  Is there a way to change settings of network profile for networks unidentified somehow outside the local security policy editor? (via the registry)?

  Hi Konaa,

  1. Click Start, type Regedit

  2. find hklm:\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318}

  3. find your network card adapter and create a dword value named "* NdisDeviceType" and change the value between 0 and 1 and enable/disable network cards.

  You can also try this:

  1. the Registry Editor open, if you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  DhcpConnEnableBcastFlagToggle click 5.right, and then click on edit.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  How to back up and restore the registry in Windows XP: http://support.microsoft.com/kb/322756

  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry

  =================

  Find the Hello service by typing "services.msc"... START-> "search box" and Enter.

  This service is installed by Apple, if you have iTunes or adobe applications.

  ===========

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• the zoom browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  # zoom the browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  I haven't seen good eye.

  Install the extension to Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• For now I use PSE 8 and the adobe bridge for classification, stars, keywords can I keep all my work on the bridge if I change to PSE14 and the Organizer?

  Hello

  For now I use PSE 8 and the adobe bridge for classification, the stars, the keywords

  can I keep all my work on the bridge if I change to PSE14 and the Organizer?

  Thank you

  Exit the bridge and try to revive all by pressing the three keys Cmd + Shift + Optn (Cmd + Shift + alt)

  Choose to re - set prefs.

• Unique identifier of the display.

  Hello

  Is it possible to display the unique identifier for the step instead of or in addition to the name of the step?

  How to display this unique identifier in the sequence editor?

  K.

  Hello

  If you use 4 TestStand, you can customize the configuration of list step.

  You can customize the columns to display what you need.

  You can change the column type of the step name in the Expression and the expression of the value Step.UniqueStepId.

  Step of the column should display the id unique step instead of the name of the step.

  Bruno

• How to build a unique identifier of the XML?

  I have a fairly simple XML structure as in the example below. I'm storing XML data in XMLTYPE table without changes and the construction of a set of views for XML SQL data in addition to this access. It is very basic and indicated for example in Breaking Up several levels of XML data: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e23094/xdb03usg.htm#autoId58
  
  The problem is that the XML data is missing an identifier for the order items that could be used as a primary key when document splitting audit (items) relational perspective.
  
  Currently I intend to construct such an identifier by combining a high level (which is unique) identifier to the ordinal position of the elements of order. Unfortunately I do not know how to do (see below). My second question is if it's a good idea at all or if something's substitute.
  
  I'm under Oracle 11.2.0.1.0.
  

  create or replace view orders_view as
  with xmldata as (select xmltype('<batch id="batch1">
  <order>
    <orderer>Joe</orderer>
    <items>
      <item>Standard widget</item>
    </items>
  </order>
  <order>
    <orderer>Jack</orderer>
    <items>
      <item>Regular widget</item>
      <item>Cooling widget</item>
    </items>
  </order>
  <order>
    <orderer>John</orderer>
    <items>
      <item>Super+ widget</item>
      <item>Super+ widget</item>
    </items>
  </order>
  </batch>') object_value from dual)
  select x1.batchid,
         (select x1.batchid || '-' || x2.orderid from dual) as orderid,
         x2.orderer_name,
         x2.nbr_of_items
  from xmldata,
  xmltable('$doc/batch' passing xmldata.object_value as "doc"
           columns
           batchid varchar2(10) path '@id',
           orderlist xmltype path 'order') x1,
  xmltable('/order' passing x1.orderlist
           columns
           orderid varchar2(20) path '"?"', /* What to put here to get expected results ? */
           orderer_name varchar2(10) path 'orderer',
           nbr_of_items number path 'count(items/item)') x2;
  
  column batchid format a10
  column orderid format a10
  column orderer_name format a10
  
  select * from orders_view;

  Expected results:
  

  BATCHID    ORDERID    ORDERER_NA NBR_OF_ITEMS
  ---------- ---------- ---------- ------------
  batch1        batch1-1   Joe                   1
  batch1        batch1-2   Jack                  2
  batch1        batch1-3   John                  2

  Where ORDERID is built like BATCHID + '-' + the position of the < order > element in the batch.

  Hello

  The clause for ORDINALITE does exactly what you want:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/functions253.htm#SQLRF06232

  select x1.batchid,
         x1.batchid || '-' || x2.orderid as orderid,
         x2.orderer_name,
         x2.nbr_of_items
  from xmldata,
  xmltable('$doc/batch' passing xmldata.object_value as "doc"
           columns
           batchid varchar2(10) path '@id',
           orderlist xmltype path 'order') x1,
  xmltable('/order' passing x1.orderlist
           columns
           orderid for ordinality,
           orderer_name varchar2(10) path 'orderer',
           nbr_of_items number path 'count(items/item)') x2
  ;
  

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  Hello

  In slideshow options, please enable 'Show lightbox parts while editing', under the editing section.

  Thank you

  Sanjit

• can someone change my WZC and the setting of security through the internet?

  can someone change my WZC and the setting of security through the internet? I was watching a video on youtube when my stop comp. and restarted on its own. start and my security program was not able to start, had to uninstall and reinstall to turn back. He told me has encountered a problem and that you must close the program and the program would not close. It comes in a loop. Security found nothing. WZC to capture multiple signals, but now I can't pick up a. right extremist to the modem.

  It seems that if you picked up some malware.  What is the full error message on "antimalware executable?

  I would like to cancel the restoration ago 2 months... it's really too long to rely on system restore.  Too many things have been added in the meantime who is affected negatively by the restoration.

  It is very difficult to say anything from the limited information you provided, but I suggest starting by download, install, update and run a full scan with MalwareBytes Anti-Malware.

  In your answer, in addition to providing the full text of the error messages, provide all of the following:

  What version of Windows, including service pack, do you have?
  What antivirus application do you use?  Is up to date? Have you ever let her subscription lapse?
  What other antimalware applications do you have?
  What is the brand and model of your computer?
  What is the brand and model of your wireless router?

• I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Original title: problem e mail

  I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Suggestions;

  1. make sure that your e-mail program is your default program.

  2. make sure that your Internet Explorer, or your main browser has all its faults.

  You can do both of the above by following these steps...

  Start button > right column, click default programs > click Set Your Default programs...

  1. click on your e-mail program > it doesn't say "this program has all its defaults"?
  If not, click on choose by default for this program > check all boxes below the list > click on save when finished.

  2 do the same as above for your Internet Explorer, or your main browser.

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• The Start button and the taskbar on my computer has changed and I don't know how to get back to its original look, I have windows vista

  The Start button and the taskbar on my computer has changed and I don't know what to do to get back to its original state. I have windows Vista

  Hello

  Have you changed the desktop theme?

  Change windows to Classic view

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-to-Classic-view

  Refer: Change Desktop Theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Why are some Visual elements will automatically turn off?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-are-some-Visual-elements-being-automatically-turned-off

  Thank you

• where can I download center solutions HP for 32-bit vista and the deskjet all in a f 2180

  Hello

  where can I download center solutions HP for 32-bit vista and the deskjet all in a f 2180

  Hi dredgard

  You need to download the driver from the link below and the full features software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3177562

• I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code.

  I need help to activate my computer but I don't have the code. I bought a computer that has been renovated and the owner said that he has updated the computer with Windows 7, but the computer is now ask for an activation code. I tried to contact the guy but he won't answer. Is it possible to check the activation without the code? I need help and do not want to pay a hundred dollars more.

  Is there a COA sticker that is attached to the machine?

  If so, check to see what edition and version of Windows machine is licensed to:

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  Also:

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• I bought a license for Adobe Stock photos, and the watermark. What should I do?

  I bought a license for Adobe Stock photos, and the watermark. What should I do?

  By pouring, I got a high resolution image but still Astock watermark. I don't know how to get in touch with the company, I don't know how to solve the problem. Can someone help me?

  By pouring, I got a high resolution image but still Astock watermark. I don't know how to get in touch with the company, I don't know how to solve the problem. Can someone help me?

  Krzysztof salvation,

  Are you saying that you have followed the instructions provided by Brad, I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?  and you are unable to download images without the watermark? Please provide the steps that you use to better we can help you with your problem.

  EBQ