Working with video in Lightroom

Similar Questions

• Work with videos of different quality in Photoshop

  Hello.

  I started to edit videos in Photoshop CS 6 Extended version recently.

  work with it's pretty easy and fun.

  I had to do a video combining lots of other videos, which are obviously different qualities, namely 1080 HD, 720 p, which are high-quality, while others are rather small quality like 480 p, 240 p & 360 etc.
  When I made the video made & hit games, videos that have been more small quality narrowed in the final window rather size while the best quality videos were good enough to cover the entire frame.

  What is the procedure to make all equal coverage videos edited without reducing the smaller size of quality videos and poor area image?

  I hope I'm clear here.

  I can post the video anywhere to explain it clearly.

  Kindly help.

  You can consider using instead of the Premiere Elements or Premiere Pro.

• Problem working with video

  I have problem in working with opening and video editing

  When I tried to open:

  Could not complete your request because it is not just some sort of paper [for all video formats]

  When I import video:

  It creates as many layers there are frames in the video

  Help, please

  Thank you

  The video is as formats of Image, but on steroids. Also, many formats, such as AVI may have 100 different codec inside of them. It's almost like having a JPEG, that contains a TGA or a TIFF image, or a PCX, a number any of what we see in other formats. It can be intimidating, but let's start at the beginning.

  For a discussion on formats such as AVI, MOV, WMV, etc., see this article: http://forums.adobe.com/thread/440037?tstart=0

  CODEC is the "bricks" of AV files, this article is good too: http://forums.adobe.com/thread/546811?tstart=0

  As you see from the first link, the format is just a 'wrapper' and can contain all kinds of "stuff". This FAQ entry will tell you how to "look" inside the wrapper. That's what we need, like Mylenium the request. If you can let us know all files failed, maybe someone can help you.

  Also, the PS has limited a little video support, decode and encode, so, and depending on what you have, you may need to convert files that/those.

  Good luck

  Hunt

• PE4 crashes when working with videos MP4

  Hello everyone - just got a new Samsung HMX20 camera - shoot in full HD and creates clips in MP4 format.  I did some tests on cam before shooting to about 111 clips today, for a total of about 30 minutes of video.

  The test worked great, looked CLEAR and fabulous.

  I started PE4 and captured all the clips very well.

  However, when I try to import more than about 10 clips in a new project of PE4, he takes (no warning or message) and goes to a blue screen, then restart my computer.

  System Specs: 1 month, HP Pavilion DV7, AMD Turion Dual Core 2.10 GHz 4.0 GB, 64-bit system, 184 GB free of 284.

  I have a backup drive I could use if necessary, but do not know if this can help - I thought it would be better to have everything on the C drive...  Although it is perhaps naïve of me.

  Any thoughts?  It is a client project, so any help would be GREATLY appreciated!  If you have any questions to help your understanding of the issue, feel free to ask.

  I used successfully the PE4 with my old Panasonic cam (not HD), and this question has never been so far, when you try to work with many clips.

  I'll also post this to movipix.

  Thank you!!

  It's probably MP4 video format that gives you the questions, it is a variant of H.264 (MPEG-4. STROKE) that is similar but not identical to AVCHD. Infact I'm surprised that you can work with clips in PE4. Full HD AVCHD support was introduced in PE7... PE4 supports HDV MPEG2 format. Infact Adobe had to do some work to "optimize" the memory management to get the AVCHD to work.

  What project preset are you using? And you plan to export high definition or standard definition? Your best bet would be to convert to DV - AVI clips, if you plan to export SD or HDV MPEG2 if you plan to export as HD.

• DMA2100 pause, fast forward and resume won't work with video files.

  Hello

  I have the extender DMA2100 working with and Win7 media center movies streaming absolutely perfect.  The problem I get is when I try to pause for more than a few minutes or go out to a movie and try and resume, which until the beginning of the film! It's so frustrating to anyone can help?

  Hi Scottking69,

  There are questions about the compatibility of Windows 7 and DMA (as a few years ago). Linksys/Cisco, it has been verified that it is NOT officially supported. But some do work but not at full capacity. Hope that this would settle the question whether it is supported or not.

  See you soon!

• to add to my previous question, bright room told me "there is an error in working with video" someone you suggest a fix?

  It worked a few days back but not yesterday or today and there was a patch ot two since then?

  Hi people I solved the problem by restarting light room under Ctrl Shift Alt (as recommended by both the Adobe people chetna and?) Sorry I can't see his name and reset all default preferences. This gave me the options to play the video and to solve the problem of export... .in the export under the video tab window, I put the file type 'File not edited original' and iron out the last of my problems.  I have to say that it's nice to adobe to provide the software so unstable that so many users have similar problems.in respond to what precedes by Claes, next time lightroom, stops, I will try your solution but for now it is sorted, if I get more problems, then maybe I'll go on another software provider and see if they have a program that works all the time every time.

  Best regards

• Working with video...

  Can someone provide me with some information on how to capture video in actionscript and save it in the database and then display it in a mxml component... Thanks in advance...

  "Oh I see what you want, you want the full video, the: capture in Actionscript" part threw me off the coast.

  So in this case, it is easy, just use the CameraUI class:
  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/Media/CameraUI.html#launch (...)

  When the video is finished, you will get a complete event with a path to the video.

  Displaying in MXML is as simple as the definition of the source of a component.

• Problem working with tiff from Lightroom CC upgrade files

  Since upgrading to LR CC when I make changes using another editor/plugin called since lightroom .tiff files when the file is saved in LR content is not updated for when the item is exported in the plugin or PS CC. When LR is stopped and restarted the previous content changes become visible. It is very frustrating having to close and restart LR everytime I want to create an image of BW in PS since a .tiff or use DxO filmpack plugin. Note that this was not a problem in LR 5.

  I tried uninstalling and reinstalling various plugins and LR in a combinations. This does not solve the problem.

  I'm running Win 10, 64-bit LRCC 6.1.1 PSCC and all versions are the latest releases

  It's a problem for almost 3 months now. are there plans to fix this soon?

  After that a long lock of study and research I found the real solution to this problem. In the catalog settings, there is an option to automatically write changes into xmp files. If this box is that the changes are not captured by LR until the reboot. I noticed there was an occasional message on execution do not write the xmp file and it would complement the next time that LR has been restarted.

  Uncheck this option allows to change it be picked up immediately. Hope this helps someone else with similar problems.

  Under settings for the catalog in the file handling tab, you will see this option. If it is enabled, try unchecking it and see if it helps your changes to be picked up when applications closed third until LR.

• Working with video clips with audio 5.1

  Someone sent me a video file with 5.1 audio.  I'm going bonkers trying to figure out how to alleviate individual channels in this file.  My final draft stereo and I I want no sound from the rear speakers in my final mix.  I can't understand what search terms will lead me to the answer in the first help file.  Can someone help me with this one?

  J. D.

  You should be able to click with the right button on your source file, then select Edit-> Audio channels

  

  And then enable or disable channels that you want to use:

  

  Please note that this can be done BEFORE use of the clip.

  Hope that helps!

• How to work with video to rotate

  Hi all

  I have some video that was shot with a cell phone, put on a table on the side. The result is that all subjects are off by 90 degrees. I know that is not near the good way of filming, but it was given to me and I want to get the most out of it.

  I am able to rotate 90 degrees to the right in front. Then I created a test output file, an AVI file > DV-NTSC-Standard and output displays black bars on both sides. I don't know that I'll have to live with that. However, the sound is out of sync, too. My goal is to create something that will be played on a computer Windows, projected on a screen.

  Someone you will suggest the best of the project and the output settings? Here's what MediaInfo told me about the source files, which are .3gp files.

  Thank you!

  General

  Full name: C:\Users\...\VIDEO0051.3gp

  Format: MPEG-4

  Format profile: 3GPP Media Release 4

  Codec ID: 3gp4

  File size: 141 MiB

  Duration: 6 min. 30 sec.

  Overall bitrate: 3 029 Kbps

  Video

  ID                                       : 2

  Format: MPEG-4 Visual

  Format profile: Simple@L6

  The format, BVOP settings: Yes

  Parameters of the format, QPel: No.

  Parameters of the format, GMC: no warppoints

  Format settings, matrix: Default (H.263)

  Codec ID                                 : 20

  Duration: 6 min. 29 sec.

  Bit rate mode: Constant

  Bitrate: 3 000 Kbps

  Nominal flow rate: 256 Kbps

  Width: 800 pixels

  Height: 480 pixels

  Display aspect ratio: 1.667

  Frame rate mode: Variable

  Rate: fps 23,900

  Minimum frame rate: fps 1,996

  Maximum frame rate: 473,684 fps

  Color space: YUV

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 0,327

  Stream size: 139 MiB (99%)

  Title: VideoHandle

  Language: English

  Audio

  ID                                       : 1

  Format                                   : AMR

  Format/Info: Adaptive Multi-Rate

  Format profile: narrow band

  Codec ID: software

  Duration: 6 min. 30 sec.

  Bit rate mode: Constant

  Bit rate: 12.8 Kbps

  Channels: 1 channel

  Sampling frequency: 8 000 Hz

  Bit depth: 13 bits

  Stream size: 609 KiB (0%)

  Title: SoundHandle

  Writing library:

  Language: English

  For each Clip, go to the effects tab and with the Clip selected, choose Edit effects.

  You will see the fixed effects, Motion, opacity, and Rotation. Choose Rotation and then simply adjust as needed.

  Note: will then finish with portrait, in a horizontal framework in video so you probably want to use Motion > Scale and possibly move > position to fill the frame, or leave the black bars.

  Good luck

  Hunt

• Work with videos from Muliptle in the same flash file

  I'm trying to understand the best way (steps) to put 3 videos in one file and allow the user to select the one they want to play at any time. Is someone can you please tell me if I have this correct basically... (And please correct any terminology misadventures b/c I'm still confused when I hear a movie clip vs vs versus flash animation video flash video).
  
  1 convert original .wmv files to flash video files (.flv)
  2 create individual swf files that each contain a flv with its playback controls corresponding
  3. create the 'player' video that contain instances of symbols of film that are controllable from this file.
  4. create user control buttons to allow the user to select an active symbol of different
  
  Does make sense?
  
  Please help before I have to leave it just to make.
  
  Thank you
  Chris

  Adobe first is ideal for digital editing.

  In regard to the length of the buffer, to prgoressive broadcast you simply click on the playback controller and make up the properties of the control window. There is a buffer here setting where you can add a number that you want. The value default est.01 and good memory buffer can be anywhere from 3 seconds to 30 seconds depending on the length of the video and the end user modem is slow.

• Why don't Adobe make it clear that the Dehaze tool does not work with stand alone Lightroom 6?

  I upgraded to LR 6 because of the Dehaze feature only to find out after that I bought that is not available without subscription of the CC. Very disappointed. Why isn't this clearly from the beginning. ???

  It was clarified at the beginning, to the official announcement of Lightroom 6.1/Lightroom CC 2015.1 https://blogs.adobe.com/lightroomjournal/2015/06/june-updates-to-cc-photography.html

  It lists the features currently available in Lightroom CC (which isn't Lightroom 6), and there is an asterisk next to Dehaze, the asterisk is said "Please note that these features are not available in the stand-alone version of Lightroom 6.1."

  Is that clear enough?

• Working with video walls - create sections of video

  Hi all

  I'm new to the Prime Minister and I'm trying to understand how the article a video so that I can put on a video wall. Basically, I have a video wall of 2 x 2, each screen is connected to an independent source output 1080 p. This means that my content must be of 3840 x 2160. Then I need to take my unique content of 3840 x 2160 and divide it into parts 4 x 1080 p.

  What I can not for the life of me know is how to get first to create the files 4 x 1080 p, I need.

  I need basically:

  1 x file-> top left

  1 x right-> high file

  1 x file-> in the lower left

  1 x file-> bottom right

  Synchronize content is made by the management system that controls my sources, so it's not a matter of concern.

  Thank you!

  I never did, but you can try to make sequences of 3840 x 2160 and then using the feature of agricultural source export settings to crop the video up to 1920 x 1080. You will have to do this four times, once for each corner.

  

  If you look at the output you'll get this:

  

• I need a definite answer for the use of Premiere Pro CS4 to work with .m2ts and .mts files

  I have a Canon Vixia HF20 and a Sony HDR-XR350V.  The Canon gives me. The MTS files and the Sony product. M2TS files.  What should I do to be able to work with these files in Premiere Pro?  I sought and obtained that I'll need to buy a codec.  But there are two types of is going to be good with a codec files?

  Also, what are the steps to getting started?  Buy the codec, load the codec... Are there other measures to work with files in first?

  I'm sorry about the basic questions, I'm a photographer!  I've never worked with video before, and it's HARD!

  Thank you for your help,

  Michelle

  CS5 has native support for AVCHD... for CS4, I think that you must convert to HDV (or, perhaps, to buy a commercial CODEC to install)

  Do a search for

  convert AVCHD HDV

• Because flash player does not work with 17.0 what video player plugin replaces this function.

  Flash Player is on the black list for firefox version 17.0. For this purpose, it cannot be installed. I'm missing plugin screen or simply nothing when I click on the video on Web sites. Is there another plugin that can take place in Flash Player?

  For what it's worth, I couldn't videos to work on FF 17.01. Also, I tried to re-setup and updates for plugins Adobe FlashPlayer to work, but without success.
  . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
  Solution: after that I downloaded and installed RealPlayer with its plugins, my problems with videos went.