Works fine until I restart my computer!

Similar Questions

• I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail, I click on it but do not change it and it works fine until I restart. That is what it is? Thank you!

  I put the e-mail shortcut key to open Gmail, but it turns into Hotmail whenever I start my computer. I go to options and it is on Gmail.  I click on it but do not change it and it works fine until I restart. Everything else works fine. That is what it is? Thank you!

  gezer2u,

  Try to record your username, then back in then try to restart your computer and see if the problem still persists.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• NVIDIA GeForce GT 220 M this device cannot work properly until you restart your computer. (Code 14)

  NVIDIA GeForce GT 220M
  This device cannot work properly until you restart your computer. (Code 14)

  Click on reboot to restart your computer

  The restart does not solve their same message reappears.

  Have you tried reinstalling the drivers from here? (they can be more recent)
  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-gt-220/

  I hope this helps.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows vista-internet connection is only local. Worked fine until Vista has been reloaded.

  Internet connection is only local. Worked fine until Vista has been reloaded.

  Choose the manufacturer of your computer in the list and get them from there.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

• My repertoire is not now responsible to the vehicle (VW Golf GTI MY08 with BT fiscon system) all work fine until I received the watch

  Hi all, very much has been said about the Apple Watch and the changes it makes or should I say priority, she resumed vehicle Bluetooth system.

  Since owning the Apple Watch I have has problems of Bluetooth, more with my directory does not not upward. All other functions appear to work correctly. My repertoire is not now responsible to the vehicle (VW Golf GTI MY08 with BT fiscon system) all work fine until I received the watch.

  Counsel there or just wait for an update?

  I look forward to hear from you

  < re-titled by host >

  The issues raised in your vehicle only persist when your watch is paired / with you in the car?

  I suspect either a material limitation / bandwidth here, or perhaps a software update for BT to your car system may be necessary.

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• 5210 kodak printer, when I print the document runs through the printer, but nothing prints, suggestions. worked fine until today after a move

  everything looks ok, but when I print the paper passes through the printer but nothing prints, suggestions. worked fine until today after a move

  Check with Kodak support or website to see if there's a test or a diagnostic process that you can run to identify the problem with the printer.  It is not likely to be a problem of Windows at this point.

• Windows Media Player cannot burn CD - R music. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.

  Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.  What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!

  Hello

  You got the C00D10BA error message when you use Windows Media Player. The following information
  might help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BA

  Don't forget to click on the four " + " to see more help.

  Support for Windows Media Player
  http://support.Microsoft.com/ph/7763

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my wireless was printer was working fine until what I used it to scan - and needed to use a cable for s

  Hi, can anyone help? My wireless was printer was working fine until what I used it to scan - and needed to use a cable to do so. I can no longer print wireless, Iv'e disconnected from the PC to the printer as cable seemed reasonable. What should I do? Thanks in advance

  What printer you are using?

• Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.

  I use Windows 7 Pro.

  I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.

  Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.

  Please guide me.

  Thank you

  Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory.  Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:

  AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84

  I hope this helps...

• In the 14 elements - everything works fine until I hit theTEXT tool of "T". Then the program hangs and I have to use the TASK MANAGER to close it. I have 7 previous elements that goes back to the beginning of the 2000s and am very familiar with the elemen

  In the 14 elements - everything works fine until I hit the TEXT tool "T". Then the program hangs and I have to use the TASK MANAGER to close it. I have 7 programs above, which dates back to the early 2000s and am very familiar with the elements. I did the update - but still the same. Anyone got any suggestions?

  A simple reset will often do the trick. Go to this link:

  Difficulty of tool

• I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I ha

  I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you

  Hello

  Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.

  You can do it from the control panel as well.

  This would make CD player as default PDF Viewer.

  Concerning

  Sukrit diallo

• My computer open all my programs perfectly just a few. They were all working fine until recently. What should I do? __

  All my programs work well, but a few. I installed a few programs for school and I know people that they will work perfectly. Two of them have recently begun to take a time very very long to open and we'll just get stuck loading of the title page. They worked fine a few weeks ago. I don't know what to do about it.

  Hi 321gogirl5,

  What programs are there?

  Without knowing what are the applications of problem, we can only suggest generic solution that would be in this case system restore. System Restore helps the PC Restore retroactively at the time when it was working properly without any problem. Therefore, this seems applicable in your case.

  Take a look at this option. For more details, see:

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I have the latest version of lightroom. It works fine until last night when I tried to import some files in lightroom. It will come out with a message "could not copy a file at the location requested. (113)

  Hi could someone help me with this problem.

  I tried to import pictures to destination Macintosh HD or my external hard drive but it continue to go out with the same message "could not copy a file at the location requested. (114) items 1-100: articles 101-114.

  Interestingly, it was working fine up until yesterday.

  I tried restarting computer, I have the latest version of lightroom, I use Mac Os x Yosemite 10.10.4

  Thank you very much

  Hi josepht,.

  Looks like your destination folder does not have a full read and write permissions.

  Try to set the destination as a specific folder that contains all the permissions on your local or external drive, then, check.

  Kind regards

  Claes