Worksheet to the next row.

Similar Questions

• Highlight cell when the value is different from the value of the cell in the next row.

  I have a requirement for a table (af:table, not a DB table), in cases where a cell value differs from the value in the row slot, the cell must be highlighted to indicate.
  
  the entire line can not be highlighted, only the cells with differences. For example, if the table contains data:
  

  90111    $1000    Widget
  90111    $1000    Cart

  The cell containing the value 'Widget' in the first row must be highlighted, other cells get no highlighting.
  
  The data comes from a DB, through VO table based on an OA.
  
  Is it possible to do this in the ADF (11g)?
  
  Thank you-
  -george

  There is no declarative way to do what the rows of the table are marked. This means that there is no way to access a value as a (+ 1) .attributename
  Here's a few codes. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html that might help you to implement your case.

  Timo

• Get the next row in the set of results under certain conditions

  Hello
  I have a result set with a column in ascending order of the numbers. Now, I want to compare these numbers to a value. If one of the numbers exactly matches the value then all is well and I use number < = value as a condition. If the value does not match exactly I want to get the next number in the result as well. A short example
  
  NB in resultset
  41
  82
  123
  164
  205
  246
  
  To compare with value = 200, I want to have
  
  41
  82
  123
  164
  205
  
  as a result.
  
  To compare with value = 164, I want to have
  
  41
  82
  123
  164
  
  Thanks for any advice.
  Carsten cordially

  You can use analytical functions for that. There are several options, here is one.

  with testdata as (select 41 num from dual union all
                    select 82  num from dual union all
                    select 123 num from dual union all
                    select 164 num from dual union all
                    select 205 num from dual union all
                    select 246 num from dual)
  /* end of test data creation */
      ,resulttab as (select num, nvl(lag(num) over (order by num) ,0) next_num
                     from testdata )
  select num
  from resulttab
  where next_num < 200 ;
  NUM
  ---
  41
  82
  123
  164
  205
  
  ...
  select num
  from resulttab
  where next_num < 164 ;
  41
  82
  123
  164
  

• The encapsulation of text in a classic report, bleeding in the next row with the report header template fixed.

  Hi all

  APEX 4.2.5

  XE 11.2

  Report Header fixed

  (25 and 26 theme)

  I have a classic report, and I use the fixed header template.

  If I set the width of a column unless the width of the text in the column, then the data encapsulates as it should, but instead to increase the height of the cell in the row to greet him, he bleeds into the rank and writes on the following lines.

  If I change the report to the standard model, it wraps correctly and increases the size of the cell to accommodate the text.  Not sure if it is a bug, or Im definition something wrong.

  If anyone can help to give advice on how to solve this Id be grateful.

  Ive set the maximum width of the CSS report report. and set the width of the column in the column report.

  I have reproduced it on APEX...

  workspace: VRS

  user: test/test

  Application: 291

  Page: 1

  Thank you very much

  Richard

  Richard Legge wrote:

  Hi all

  APEX 4.2.5

  XE 11.2

  Report Header fixed

  (25 and 26 theme)

  I have a classic report, and I use the fixed header template.

  If I set the width of a column unless the width of the text in the column, then the data encapsulates as it should, but instead to increase the height of the cell in the row to greet him, he bleeds into the rank and writes on the following lines.

  If I change the report to the standard model, it wraps correctly and increases the size of the cell to accommodate the text.  Not sure if it is a bug, or Im definition something wrong.

  This is because of rules CSS theme on cells and rows in the report fixed header table:

  {table.uReportFixedHeaders > tbody > tr}

  display: block;

  height: 28px;

  }

  {table.uReportFixedHeaders > tbody > tr > td}

  padding: 4px 8px;

  border-top: 1px solid #DDD;

  border-bottom: none;

  line-height: 20px;

  }

  I wouldn't really classify it as a bug, more as a hypothesis that the model would be used with data that will not be returned on multiple lines in a cell.

  It is easily fixed by substituting equal to line of table and the row height of the cells in the Inline CSS page, as indicated at page 586:

  {table.uReportFixedHeaders > tbody > tr}

  height: auto! important;

  }

  {table.uReportFixedHeaders > tbody > tr > td}

  line-height: inherit! important;

  }

• more than 50 main menu are not not in the next row, oracle forms version 10.1.2.0.2

  Dear Sir.

  I use the ORACLE forms 10.1.2.0.2 version, it is possible in this version that more horizontally online next menu top 50 show currently in the horizontal scroll bar in oracle forms menu, but in this show of forms 6.0.8.11.3 oracle version of the main menu in the following line

  Mukesh Nandan

  What was wrong with the anser you got in your first thread?

  Hello

  see you soon

• Tabular layout - what tab, do not go to the next record?

  I use the Layout Wizard to create a form with article 2 (relationship master / detail).  In the detail section, I build the layout as a table with the list of 7 lines with scroll bar.  Each row in the table has 6 field.  I enter a value in the first field, then tab, it goes to the next field, as expected... but when I tab after the last field of each line, he isn't going to the next row.

  What did I miss?

  Try this.  Maybe you are sitting at the last record already and need to do a create_record:

  If: system.cursor_item = ' EMPLOYEE. Last_name' then

  If: system.last_record = "TRUE" then

  create_record;

  on the other

  next_record;

  end if;

  on the other

  next_item;

  end if;

• Navigate to the next record

  Hello
  
  I have a form that should display the name and the Qualification (2 text boxes) a table say PDetails.
  One entry at a time
  
  I want to create two buttons in the form 'Next' and 'previous '.
  When I click on the button 'Next', it must retrieve the next row
  and for the 'Previous', previous row button.
  
  (It's there implicitly, forms when we give the query and all, but I want to create explicitly two buttons)
  Any help?
  
  
  Adkins

  You can view the built-in feature of oracle read image file image. Just search on forms help keyword READ_IMAGE_FILE. So you can give the path that is in this area and you will need to create an ELEMENT of IMAGE non-base of data in the same block and the trigger will work for that "WHEN NEW-RECORD-INSTANCE" at the block level.

  -Clément

• Read all rows in a worksheet except the first

  I have a spreadsheet with titles and I want to read a different worksheet with headings and add this info in a simple spreadsheet, but I want to delete all the titles of the apreadsheet of second, third, fourth...
  Can someone tell me please how to do this?
  I thought maybe if I converted to the worksheet to the search string, and rrplace titles and then return for a spreadsheet of table 2d, this could work. The thing is that I don't know how to get back to a spreadsheet of table 2d of the string with a single vi or in the simplest way possible, without knowing the amount of lines in each apreadsheet.

  Hello

  Read the first line of the second file and discard data. THEN read the remaining lines...
  Or read all the lines and remove the first row of the table...

• extraction to a minimum and the next minimum value in each row of a matrix

  Hello

  I need to get a minimum and the minimum value next to each line of a matrix of dimension 2.

  I could extract successfully the minimum value, but failed to get the next minimum.

  Here is a screenshot of how I arrived at the minimum value

  Conversion matrix at table then use the leaderboard

• How to move to the next component?

  Dear friends,

  Can someone tell me how to move the focus to the next item in the screen. In fact, I have a verticalmanager with verticalscroll this Manager of vertical field consists of the field with about 100 rows of data. Below this vertical field Manager, I have a single button. If I want to move this button means that I have to go through all these 100 lines in this edit field. It is in any case to move the focus to the button directly by clicking the single button. If you have an idea to solve this problem pls help if you can please give me some code snippet.

  Kind regards

  s.Kumaran.

  You can use setFocus to set focus on a certain area. How you trigger it is your choice, you could, for example, use enter or alt + key. Use keychar or keydown for the management of keys.

• Order form does not update grand total calculation until I have indicate a number on the next line.

  I created a purchase order with a "quantity" column, a column of job description, a unit price column and a point $ column total. I've set the total column of $ point to calculate automatically once a quantity and unit price entered, and it works immediately once the unit price and quantity entered. But my grand total at the bottom of the total column $ is set to calculate all the lines of total $ point, but the total general don't not updated to reflect the $ total for a given line (e.g. line B) until I have begin to type a number for the next line (e.g. line C). So, I always end up having to create a line of extra reserved space with a quantity of 0, just to get my total general to update. Is there a way to fix this?

  It is most likely a problem with the calculation of field order. You must ensure that the total is calculated after row grand totals.

  This can be set in form editing mode, under the order of computation of Set field - other tasks.

• Summary of the results on the next line?

  In general, this kind of thing is easily obtained in Excel where you can calculate values in a column of output based on the input values. I need to do it in PL/SQL.

  
  

  I have a relatively simple question where I'm out of values (heads) and then I need to display the sum on the next line (sort of a running Total).

  Let me explain with an example:

  ID Start Date End Date column 1 column 2

  =============================================

  1 1 JANUARY 2010 TO 30 JUNE 2010 120 0

  2 1 JULY 2010 TO 31 DECEMBER 2010 200 120

  3. ON JANUARY 1, 2011 30 JUNE 2011 115 320

  4 1ST JULY 2011 31 DECEMBER 2012 300 435

  5 1 JANUARY 2013 TO 30 JUNE 2013 100 735

  As you can see that the 2 column is derived by adding the previous values in column 1 and appear on the next line.

  So for ID = 4, column 2 = 120 + 200 + 115 = 435 and ID = 5, column 2 = 120 + 200 + 115 + 300 = 735.

  Any ideas or pointers would be greatly appreciated!

  Thank you

  Hello

  That sounds like a job for the analytical SUM function:

  SELECT id, start_date, end_date, colonne_1

  SUM (colonne_1) over (ORDER BY start_date

  End_date

  ,         id

  ) - colonne_1 AS column_2

  FROM table_x

  ;

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  This requires no PL/SQL, but this market be the query in PL/SQL or not.

  Don't forget that the rows in a table are not in a particular order, which determines who is the 'next' or 'previous' line in this problem?  Start_date?  End_date?  ID?  A combination of them?  Something else?

• Find the next query only job n

  Hello
  
  I need single query return the next workday after n days go on a date.
  Working day is every day (too much vacation) with the exception of satudarday and Sunday
  
  
  I found a few working days of request County betweeen two dates, but I can't
  to create a single query (without use of function) to add n working days, for example:
  
  Today is 18/04/2013, I would like to add 5 business days then
  
  the next working day is 25/04/2013
  
  If add 8 working days will be 30/04/2013
  
  How can he do?
  
  With the help of 9.2.08

  Something like...

  SQL> with t as
    2  (
    3  select to_date('18042013','ddmmyyyy') dt,
    4      8 no_of_days
    5  from dual
    6  ), t2 as
    7  (
    8  select dt,
    9     case to_char(dt,'fmday')
   10       when 'monday' then 4
   11       when 'tuesday' then 3
   12       when 'wednesday' then 2
   13       when 'thursday' then 1
   14       when 'friday' then 0
   15       when 'saturday' then -1
   16       when 'sunday' then -2
   17     end dif,no_of_days
   18  from t
   19  )
   20  select dt,no_of_days,
   21     case when no_of_days <= dif then dt+no_of_days
   22         else dt+dif+(no_of_days-greatest(dif,0))+
   23             (ceil((no_of_days-greatest(dif,0))/5)*2)
   24     end next_dt
   25  from t2;
  
  DT        NO_OF_DAYS NEXT_DT
  --------- ---------- ---------
  18-APR-13          8 30-APR-13
  

  Published by: JAC on April 18, 2013 19:17
  Not tested... It will give you a starting point, if you do not want to row generation...

• Presentation of the form of the ADF - navigation by jumping the next record.

  I have a hard time trying to implement a feature using ADF. Please see my below use case and advise.
  Use case:
  To view the questions and capture responses (yes/no).
  
  I use a formatting for data (questions to show) collections and adding the Yes buttons, not to enter the answers. The part I'm having trouble is: based on the answer to a particular question, there may be questions void to the question of the mother who may or may not be displayed according to a business logic. All questions and sub-questions are in the same table. The subquestions should not be displayed, should I remove them from the collection of data, so that when I click on the button 'Next' to go to the next question of parent. How to hide or show not the few recordings following, in a collection of data with navigation controls and put in shape.
  Thank you.

  Your previous post has a possible answer. If you update an attribute on the records of the Sub, then when the user clicks the next button you can browse the lines and the value of the current row to the next question with the correct value of the attribute.

  You have an attribute - 'IsDisplayed. Answer to question 2 and press Next.

  (1) if the condition is met - set the IsDisplayed to 'False' flag on the issues 3 & 4.
  (2) crosses the lines until you find the record following IsDisplayed flag = "Y". In this case, it would record 5.
  (3) select this row as the current row in the collection.
  (4) at this stage, the form should display the current line (form 5)

• Save the record before moving on to the next line in the data block

  Hello
  
  Form 10g, I have a block of retail, in the block of retail, I want the user first save the current line and then move to the next line, in the validate_record trigger, I checked the system.block_status = new but its does not work and the user is still able to move around the lines below without saving it in the upper rows.
  
  any tips?

  Ouadi wrote:
  Hello

  Form 10g, I have a block of retail, in the block of retail, I want the user first save the current line and then move to the next line, in the validate_record trigger, I checked the system.block_status = new but its does not work and the user is still able to move around the lines below without saving it in the upper rows.

  any tips?

  Yes. You can make commit automatic when changing the line.

  When-new-folder-instance trigger writing

  commit_form;
  

  I hope this helps...