Workstation HP Z230: how to disable NVIDIA NVS 315 to use integrated DP and DVI ports

Similar Questions

• How to check only my laptop computer use integrated or the AMD graphics card?

  How to check only my laptop computer use integrated or the AMD graphics card? Some games show me that they use the built-in map: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?

  I have no other option. I have disable Intel card in Device Manager, and it shows me that the AMD driver is not installed correctly. Thank you.

• Help, audio stop working in XW6600 with nVidia NVS 315 graphics card

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP spare part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is solved if I reinstall the NVS 290.  For both cards, I use the latest driver from nVidia.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  Hello:

  When you install new video card, it must have a HDMI on it audio chip and what happens, is that the BIOS has disabled the integrated audio system thinking not only have you installed a video card, but you have installed a map audio too.

  Then, go into the BIOS, probably in the Advanced menu, the options menu, you will find onboard audio setting.

  It will be set to Disabled. Set to active, save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  When you restart, the integrated audio system should be back.

• Impossible to tell if Nvidia NVS is really used

  I have a laptop Latitude E6420. He says that he has both Intel integrated HD video 3000 w / 64 M and Nvidia NVS 4200 M. New install of win7-64. I tried to install the driver NVidia dell. He said he video driver intel needed first. Very well done. The NVidia driver then went into a fine. Device Manager now shows the two, first Intel. If I go to the screen resolution, advanced computer says that my video is Intel HD 3000 w / 64 m. The NVidia present in Device Manager, but not clear, it does nothing. If I dig deeply real in the news from Nvidia, I find it says that it has 512M dedicated mem. But this weird mixture of info confused me. Is in fact running Nvidia or Intel integrated video made for? (Bios gives no option that affects this.)

  Answered my own question. The bios has an option for nvidia Optimus technology. It turns out that that is the ability to use graphics from intel for most things and only kick in graphics from nvidia, the need, thus saving power.

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• I have Windows 7 Vista. I asked several times how to open a web browser without using my mouse and the other person has given me the right answer yet, or I misunderstood the answer (the more likely scenario)

  Given that I can't grasp how to open a browser window without using a mouse, it dawned on me that I can open new windows in just a window browser.  In fact, I would like that my home page contains all my most visited sites.  However, I am such a novice at this, I don't understand half the jargon, as what is the difference between a window and a tab.  I am a CPA, and for the first time in my life, I have no support from the computer.  I have called my programmer to answer questions and fix my computer.  Now I'm on my own and not completely lost since I tried to learn from my programmers, but we can't assume that I know nothing (or almost).  Thus, when answering my questions, please pretend I'm in third year.

  What is the difference between a window and a tab, and how can I open multiple windows web browser that a

  Hello tterrie,

  In addition to the link provided by Rick, here's a complete list of available shortcuts Internet Explorer.
  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to start Alerts notification to visitors using the DNS and IP society?

  1. I need to configure alerts for notification of visitor using the society of DNS and IP? How to do this?

  2 - second thing is what is the common use of DNS and IP society in the fields of account?

  Thank you

  Nabila,

  It is largely something E9 - the notification feature a much simpler with Profiler (Yes, there is a separate fee)

  without prospect Profiler: (I think I have the actual documentation at my office - will check once I'm back from #mme15 )

  1. go to settings, profiles of visitors, then change your display to show the fields you want to see.  Since you ask specifically about DNS and IP address, the view of the "technical information" is a good starting point.

  

  2. go into Setup and default user settings for users, configurations of Notification to visitors.  You can use the default or create new (lower right corner)

  Specify the view you want to use.  You can also create a custom for this notification by electronic mail header.

  3. go to settings, Notifications

  

  Configure your notification rules.

  

  for your second question - common use of DNS and IP name in the account fields, I don't think that there is a "common use" since the visitor record will show exactly the IP address and most organizations have a range of IP addresses, any sort of comparison of the visitor to the account is difficult.

  If your use case must match their account of visitors, e-mail domain is much easier.  Create a field on the Contact and account for the 'area of email address', a string manipulation cloud app to take the email address and delete everything before him ' @' accounts will be filled with the domain via a data load (or you can approach with a rule/validation rule set update to the name of the company (, remove the spaces and special characters and add with ".com")

  You could then: linking contacts to accounts using this field (will need to ensure that duplicate any record company) or use a rule of Match/deduplication to enter the values for the table of the company to update the contact. (or vice versa)

  I hope this helps.

  Nathan

• How to disable Autostart music when the headset is connected and smartconnect?

  Hello

  After rooting my Z3C and upgraded to fw.5.77, I have disabled some packages app via the Asian Development Bank, as the package "SmartConnect" (com.sonyericsson.extras.liveware). But I still have this annoying music autostart when I connect my headphones.
  If someone could tell me how to turn off once and for all this (music?) on the road via ADB or freeze it through titanium backup?
  Thank you!!

  Thanks for your reply Uliwooly!

  I fact, but autolaunch suite...

  I finally found that also was an option in my Walkman (PowerAmp) I had to disable

  Thanks again for your help!

• How to disable the fuller list recently used in Adobe Reader?

  Hello

  How can I disable the "feature" of the list of last files used.

  In our society, it is not alowd to see what document was used the last time on a computer/connection.

  A deletion planned to the registry is not a functional way to fix the problem.

  s. Peter

  You cannot uninstall COMPLETELY, but you can reduce it to 1 part. Under Preferences > Documents

  

  1 is the minimum and maximum 10. Hardcoded, no way to expand or reduce these limits.

  The ONLY other option is to disable the 'Welcome' screen on the whole less Preferences > General

  

• How to disable direct sound when you use a plugin for guitar?

  I use the Waves GTR plugin for recording guitar in Logic Pro X, but because it puts a lot of pressure on the CPU, I tried he governs through a "bus" instead of having the plugin separately on every guitar track. The difference is that when I use the bus option, I can't seem to get rid of dry direct sound which is obviously very embarrassing. The only way for me to get rid of the direct sound is to use the RTM plugin on every guitar track that quickly causes the overload program when using several of these titles.

  Anyone know how to get rid of the direct sound when you use the alternative of bus for the guitar tracks?

  just at the exit of the guitar channel strip no output. This way you won't hear at the follow (because the dry track will not be transmitted to any output)

• How to disable the status text without using Status4Evar

  I want to disable the text of the status bar with pop down when you hover over a URL. The reason is simply because I think the annoying blinking, if I want to see where a hyperlink I used to look at its properties.

  The most common solutions seem to be edit the userChrome.css file (this has no effect for me), or use the Status4Evar addon. The addon works, but it is another problem and flies the way of pop-up downloads down to the left, as shown here: http://imgur.com/XyLkX30

  I also tried "Bar of the Addon (restored) but it does not delete the text of State.»

  Is there another way?

  Thank you.

  Does your code in the file work?

  #urlbar *, #FindToolbar *, #search-container * { font-size:15pt!important; }
  

  Can you post the entire contents of the userChrome.css file?

  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
  • Paste the code in the userChrome.css file in the Editor window
  • Make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

• How to disable the spell checking when using facebook

  Hello. I just started using Firefox and am really impressed. I like it.

  I noticed that when you post a message on Facebook, there is a spell checker that runs and highlights words that are misspelled. I don't see this using IE9. Is it possible to disable this "spell check"?

  Thank you

  Hello

  You can enable spell check:

  • Tools > Options (Edit > Preferences in Mac and Linux)
  • On the Advanced Options tab, uncheck "check my spelling as I type".

  Alternatively inside any input text area, you just right-click and select "Check my spelling" - he should stop checking your spelling.

• How to disable a button when you click on another and vice versa in busy border?

  Hi guys!

  I have a question about the buttons!

  I'm not an expert in coding, but I managed to create buttons with actions, but the question is how do I deactivate (deselect) a button by clicking on another and how to activate it when clicking on it?

  I would really appreciate your help!

  Thank you!

  composition of loan:

  button_1 = 0;

  button_2 = 0;

  in the click event of button 1

  If (button_1 == 0)
  {
  button_1 = 1;
  sym.getSymbol("button_1").play (0);  play anything, this button is

  If (button_2 == 1)
  {
  sym.getSymbol("button_2").playReverse ();   Reset everything that made the other button
  button_2 = 0;
  }
  }

  in the click event of button 2

  If (button_2 == 0)
  {
  button_2 = 1;
  sym.getSymbol("button_2").play (0);  play anything, this button is

  If (button_1 == 1)
  {
  sym.getSymbol("button_1").playReverse ();   Reset everything that made the other button
  button_1 = 0;
  }
  }

• Hello, my name is Haysly Wells. I am buying a new comouter, and I intend to give the one I currently use for my little brother. How can I stop Firefox from automatically using my usernames and passwords on websites such as Yahoo?

  Firefox remembers my logins and passwords for some sites like Yahoo. How can I disable it, so that other users cannot access my emails?

  To clear your saved passwords, go to the Options of Firefox dialog box, click Security in the top and you will see the options about your saved passwords. You can click on the button 'saved passwords... '. "to manage and delete them.

  You can also clear your cookies and other data with the dialog clear recent history, using the drop-down menu to select the entire document and do not forget to click the details arrow to choose exactly what you want deleted.

  If it is not obvious how to find the Options dialog box and the dialog clear recent history, they are both under the Tools menu, if you showed your menu bar, or are in the main menu of Firefox as Options or history > clear recent history.

  Edit: well, I did not notice first that your operating system is Linux Mint 10. Your Options dialog is actually in Edition > Preferences.

• How to communicate with a module 9401 using 9151 expansion and PXI-7813r map

  Hello

  I just started with my map of series R 7813.  I could create a simple VI in which I could send and receive digital signals.  Now, I would like to do something similar using my 9151 expansion chassis and 9401 module C-series.  If possible, I would like to do this using windows (no RT for now).  Now I'm right click on "my computer" in the project tree and adding new devices to find the 7813.  From there, I have an idea how build a simple VI using the example of OR.  However, I don't know where to look for the expansion chassis or C Series module.  If someone could give me some advice or point to an example, would be great.  I've seen examples example Finder for the 9401, but they seem to use a system as opposed to the PXI configuration compactDAQ.

  Thanks for the help!

  Hello ACE_Lab,

  The steps that you must take to configure your installation in the project window LabVIEW is as follows:

  Step 1...

  

  Step 2... This step should be automatically filled in with the existing PXI-7813R if it is connected. If you want to configure the target without the smart card, you can simply add a new target as follows.

  

  Step 3... This is the point to which you will add the NOR-9151 expansion chassis:

  

  Step 4...

  

  Step 5...

  

  Step 6... If you have the module connected to the chassis, you should be able to see the module in the list:

  

  Step 7... If the module is not connected, you can simply select 'new target or device' in the menu at step 6 and add a new target as follows:

  

  An example from the Finder example called "Digital Line Input.vi" should be a good starting point. Here is a screenshot of roughly where you need to start:

  

  Kind regards.

  Jeff L.