World tanks gives error d3dx9_43.dll is missing
while trying to start a game (WOT) I get this error in system, "the program can't start because d3dx9_43.dll is missing on your computer. try reinstalling the program to fix the problem"witch I did twice, now after this faild I tried googleing this error message and got," you must down load and install end-user DirectX Runtime Web Installer ". now, when I try this, I get another error message it says "an internal system error has occurred. Please refer to DXError.log and DirectX.log in your windopws file to determine the problem. I tried the search for these records without success, can someone help me please, I am running windows 7 pro 64 bit, thanks for any help!
The files would be in the Windows \ Logs.
There are several options to fix for the problem of the Installer - Web
-Your UAC settings may be too high. You can try to disable that.
-Even if you are logged in as administrator you can R/click on the Web Installer
dxwebsetup.exe and go into properties-compatibility and check «run as administrator...»
-Start in Safe Mode and run the installer from there Web.
d3dx9_43.dll can be installed, but may be damaged.
Go to Windows-System32 and SysWOW64. If the file is there and you are still having a problem with WOT and then remove the file of each folder and run the Web Installer. The Web Installer will replace the 'missing' files
If the problem persists after you install a new copy of the d3dx9_43.dll then make a copy and place it in the games installation main folder.
lack of everything above, you can try the running System File Checker.
SFC/scannow command - file system Checker - Windows 7 Forums
In cases where there is a DirectX error and no specific file is named, it is preferable
to run the DirectX Redistributable installation program. This is the full package of Direct X and
This Setup program replaces the existing files. The Web Installer does not overwrite
existing files.
Download details - Microsoft Download Center - DirectX Redist (June 2010)
.
Tags: Windows
Similar Questions
-
Original title:
After the download problem
I tried to play on World Of Tanks on my laptop Windows 8 and he says: the program cannot start because d3dx9_43.dll is missing on your computer.
So I did some research, and Microsoft told me that I had to install the DirectX program. After I installed the DirectX software and tried to run, he gave me the following message is displayed: a necessary .cab file for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.
I don't know what to do to solve this problem.
Hello Joseph,.
Thanks for posting your query in Microsoft Community.
I understand that you have any questions, by playing the game World of Tanks in Windows 8. We will certainly help you with the same.
You can read the steps below for the game of automatic encryption Services Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:
- Start the Administrative Tools utility in control Panel.
- Double-click Services.
- Click Cryptographic Services, and then click Properties.
- Click Automatic for Startup type, and then click Start.
Then install the latest version of DirectX for Windows 8 and see if that helps.
How to install the latest version of DirectX
http://support.Microsoft.com/kb/179113
I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
-
Dear Sir.
Update software of nero multimedia suite 10, I found ' blue nero - scratch "was installed on my computer (win7 64 bit update until today) when I tried to open the drive I got the system error message" program cannot start because d3dx9_43.dll is missing on your computer, try reinstalling '. " I first used to uninstall it, but I couldn't find the program in "programs and features". Please tell me how to uninstall or solve the problem?
I updated latest version of directx 11 on my computer, is it necessary to install directx 9?
Yes, you can try to install DirectX 9:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=35
As an alternative, you can try to update to a later version of Nero.
-
When I restart my computer, I get a system LogonUI.exe error and wkscli.dll does not appear in my computer! How can I fix this error?
Original title: System of logonUI.exe error, wkscli.dll is missing
Chris
wkscli.dll is the Workstation Client DLL. It is part of the operating system. If you have the win 7 dvd you can boot from it and do a repair installation to reinstall the missing DLL
-
d3dx9_43.dll is missing from my aspire5 windows8.
There is always a message saying d3dx9_43.dll is missing, so I tried to reinstall my resident evil 4 and come with the same result...
I'm trying to download a "directx_jun2010_redist.exe" but I don't know how to use...
I need someone to help me on how to solve the problem...
Thank you in advance...
Hello
The file you need is in the long term...
Have you downloaded the full package of 96 MB, or simply the configuration file?
I'll include a link to the full package just in case...
It is a self-extracting installer free, but it does not in fact the first time, you double-click...
It extracts just, to take notice of the place where...
Once extracted, just open the folder and double DXSETUP... it will do the rest.
http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109
-
screen saver gives an error MSVCR100.dll is missing
The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem. I get this message when my screen saver tries to start. Two sequential boxes appear, which canceled once then start the screen saver. Can anyone help please?
It seems that you have installed a program that uses MS Visual C libraries
-
D3dx9_43.dll file missing in Windows 7
D3dx9_43.dll missing file. That's what I get when I install the new game it not show this problem and the game will not open. I have the graphics card Nvidia Geforce GT550m with Core i7.
Hello
· Did you change your computer before this problem?
D3dx9_43.dll problems result in one way or another by a problem with Microsoft DirectX. The d3dx9_43.dll file is one of the many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3dx9_43.dll errors usually only appear when you use these programs.
Follow the suggestions and check if that helps.
Method 1
You can run the System File Checker.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2
You can uninstall the game and reinstall on your system.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Method 3
You can install the latest Direct X from the Microsoft Download Center.
-
Simply upgrade Window8. Massage appear: mfc110u.dll is missing.
Please let me know why this error arise as system error & how to solve.
Anil
-
Explorer.exe error, Normaliz.dll is missing
When I try to start my computer, I get the above error. I get the same when starting in safe mode. The only thing that works is the Task Manager. No desktop icon just a white screen. Where should I start
In Task Manager, you can click file, hold down the CTRL key, and click New task and that opens a command prompt (or the boot safe mode with command prompt).
If you have your copy of normaliz.dll on a USB key which is the D drive (for example), and XP is installed on your C drive, you can then type in something like this:
Copy d:\normaliz.dll c:\windows\system32
When the copying is completed successfully, you will see a message like:
1 file (s) copied
You can always do since if Task Manager:
If you see a message like this:
Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.
It is in the case Log:
Event type: Information
Event source: Application Popup
Event category: no
Event ID: 26
Description:Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.
Start explorer.exe, but the normaliz.dll file. If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.
You can click OK for errors and finished up in the Task Manager where you can try to fix it. The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.
If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.
You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.
The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).
Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you. These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.
You also will be able to properly run a browser on the system afflicted to go on Internet download one.
There is a large computer security risk in the normaliz.dll from some website download. The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.
You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.
If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.
When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.
Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it. The explorer.exe tries to run and cannot until the missing file is replaced.
If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.
TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work. You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.
If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.
Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system. Sandalenet means wear you the system afflicted by hand.
I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):
c:\Windows\System32
Here is the link to my SkyDrive and you can get the file you need here:
https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311
When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
You then put the downloaded files in the correct folders on your system.
That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.
-
How to fix an error "X3DAudio1_7.dll is missing".
I use windows 7 64-bit. When I try to install a game tropico 5, that the program may not start and an error message comes that the program cannot start because x3DAudio1_7.dll is missing on your computer. Try reinstalling the program to fix this problem. But I had made the procedure are still several time problem. What to do to solve the problem.
See if the update of DirectX-
[EDIT: link updated 25 June 16]
Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center
If you get a message indicating that your Direct X is updated, the problem may be due to a corrupted the DX file.
You can locate the x3DAudio1_7.dll file in System32 and delete this file.
Run the Installer Web again to replace.
Or - reinstall Direct X by using the package of Direct X to the full address. This will overwrite all DirectX files. -
Download details - Microsoft Download Center - DirectX Redist (June 2010)
-
When starting my computer Windows 7, error ststring.dll is missing
I get an error message that ststring.dll is missing when I start my computer running windows 7 Home premium. He suggests that I have reinstall. What is ststring.dll and how I would like to reinstall it?
Hi I found this post a while back on another site, I did what it said to do exactly and it worked for me, don't waste your time call Dell they want only to load on a 100.00 to fix and there is no guarantee. Just try to do what that told the post that I inserted below or if you can't find a friend who is more computer savy and have do them. I hope this helps.
Solved: "STService.exe Unable to locate component."
Hey
First of all, my apologies if there is a section of this forum that this thread would be better suited to the. Mods, feel free to move the thread elsewhere if that is the case.
Anyway, I just thought I'd post a little fix for a problem that I had with my Dell laptop. After a registry cleanup, I started to receive the error message every time after that I logged: "unable to locate component STService.exe. This application has failed to start because STlog.dll is not found. Reinstalling the application may fix this problem. »
I googled the problem but could not find a suitable solution - all other users have this problem had simply uninstall Dell DataSafe Local Backup (where the problem is) or just simply to stop it running at startup to the top to get rid of the error messages.
However, if, like me, this isn't something in particular, you want to, here's a quick solution:
Find "Dell DataSafe Local Backup" within your program files (for me, it was in: "C:\Program Files (x 86) \Dell DataSafe Local Backup")
Find the STLog.dll file in this directory
Copy the file - and I hasten to repeat, copy it (do not move or cut the file, because it would be a lot more questions)
Find the folder Scheduler (for me, it was in: "C:\Program Files (x 86) \Dell Backup\Components\scheduler DataSafe Local ')
Paste the file into this directory
At this point, I want to emphasize that STLog.dll is not - or at least was not for me - the only one missing. I also had to copy all the following dll files in the same way:
CSTError.dll
STString.dll
STXml.dll
STStringArray.dll
LibXml2.dll
ZLIB1.dll
STFiles.dll
STRegistry.dll
STPE.dll
STNLS.dll
STSystems.dll -
Original title: Errror 7 (Windows error 126)
iTunes at startup problems...
My laptop shows Sony: AVFoundationCF.dll is missing.ApplesyncNotifier.exe shows: ICUUC36.dll is missingError 7 (Windows error 126)I tried to uninstall and re - install iTunes, but I keep getting these messages at startup.Advice please?It seems that many other people have the same problem as stated on google etc.Thank you.Geoffrey SalvageHi Amelia,.
1. Since when are you facing the issue?
2 did you a recent software or changes to the material on the computer?
You can try to repair the itunes and check if it helps.
If this is not enough, then you can follow the steps provided and check.
Method 1:
I would say allowing you to run the FIXIT from the link provided and check if it helps.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstall
Try to install itunes and check if the problem persists.
Method 2:
If the problem persists, you can run the System File Checker to scan. The scan will replace all the Windows files corrupted with new ones.
Click on the link mentioned below for more information about the System File Checker analysis
http://support.Microsoft.com/kb/929833
Method 3:
Important: Do not forget to back up the registry before you follow the steps in the link.
Error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found.
http://support.Microsoft.com/kb/959077
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
Hope this helps and let us know if you need more assistance.
-
How to fix an error "X3DAudio1_7.dll is missing" for DirectX11?
I am currently under the 64-bit version of Windows 8 and tried to install and play Skyrim on my computer. Whenever I try to launch Skyrim I get ad message that says: "X3DAudio.dll is missing on your computer. Reinstall the program should correct this problem. "I've uninstalled and reinstalled Skyrim 4 times to try to resolve the problem. Also I tried to re install DirectX, but it does not resemble what is possible. I'm almost certain that this single error is the only thing that prevents me from playing in Skyrim. If someone could help me solve this problem, I would be extremely grateful. Any suggestions?
Hello
If you encounter problems where an application fails because of the missing file X3DAUDIO1_7.DLL, you will be able to resolve the failure by running the package to run DirectX.
I suggest you download the Runtime Package and then install.
http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109
In addition, you can diagnose basic problems with DirectX
http://Windows.Microsoft.com/en-CA/Windows-8/diagnosing-problems-DirectXLet us know if it helps. If the problem persists, we would be happy to help you.
-
error: sqmapi.dll is missing
Original title: what is sqmapi.dll
my laptop says that sqmapi.dll is missing
looks like run SFC should help.
Ref:
http://www.SevenForums.com/general-discussion/181252-sqmapi-dll-missing.html
and
-
Error "mcmoem.dll is missing" message after the connection to the computer.
When I turn the computer I GRT a box that says mcmoem.dll is missing. What is it? Running Vista Home Pre/MSE/IE9
Original title: mcmoem.dll is missing
Hello CHRISHEDSTROM,
Thanks for the return of the response. I would say running a malware/spyware removal program to see if it detects any threats.
The malware removal:
Please let us know status.
Maybe you are looking for
-
How can I add apps like netflix on my TV replaced Apple
How can I add the applications that I'm already subscribed to on apple TV Suffit now the basics.
-
I received a call from a gentleman whose name is Don Myers telling me that it is from the microsoft windows service to tell me that they have discovered a problem with my windows program. I asked him (dm112) employee number and a phone number get in
-
Select start_with - connect in XML document (it looks like a bug in 11.2 g)
HelloI really have no idea of what is the difference between these two cases and why one does not return anything. I have an xml document: <?xml version="1.0" encoding="UTF-8" standalone="yes"?><dirObjects> <DIR_OBJECT> <ABSOLUTE_PATH>/ho
-
Hi allWe have a Server Windows 2008 R2 with 11.2.0.3 oracle DB installed. We must write the datapump backups to a share of SAN. Whenever I do a backup I get the below error:Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 6
-
We are having RAC Database 11.2.0.2 on cluster 3 knots. OS: RHEL 5.6 When OPatch auto is used to apply the patch we need stop all instances on the node and the cluster command or auto automatically stop and start all processes running from ORACLE_HOM