WPF chart: formatting of the axis labels

Similar Questions

• I have a bar chart and I need to completely remove the axis labels

  I have a bar chart, and I need to completely remove the axis labels and have only black 1px on the axis lines.

  I tried this in style but the font-size: 0; doesn't labels disappear completely.

  BarChart {}
  horizontalAxisStyleName:myAxisStyles;
  verticalAxisStyleName:myAxisStyles;
  }

  {.myAxisStyles}
  tickPlacement: none;
  do-size: 0;
  }

  Try adding a verticalAxisRenderer and a horizontalAxisRenderer between your tags barChart.

  That is to say.

  ....

  ...

  The key is in setting showLabels property to false.

  J

• Increase the police the axis labels and plot little away from the card.

  Hello friends,
  
  I developed a JavaFx program in which I traced a barchart.
  I'm not able to increase the font of the axis labels and also I want to print some for chart axis labels so that the tick-mark labels, and axis labels would not cross.
  
  In this table, I have "BOLD" axis-lines only in the left side and down. I also want the axis lines "BOLD" upstairs and to the right. If there is any way or method that please suggest me.
  
  My program is given below: -.
  
  SerializableAttribute public class BarChartHorzFx extends Application
  {
  the final static string AUSTRIA = "Austria";
  the final static string BRAZIL = "Brazil";
  final FRANCE Shared As String = "France";
  final static string Britain = "Britain";
  the final static string USA = "USA";
  
  /**
  * Main method
  @param args
  */
  Public Shared Sub main (String [] args)
  {
  Launch (args);
  }
  
  /**
  * FX lettering from here.
  */
  @Override
  public void start (steps) throws exceptions
  {
  final NumberAxis xAxis = new NumberAxis (0, 120000, 20000);
  xAxis.setLabel ("Value");
  xAxis.setTickLabelRotation (90);
  xAxis.setTickLabelFont (do ("Arial", 12));
  
  last axis desabscisses yAxis = new CategoryAxis();
  yAxis.setLabel ("Country");
  yAxis.setTickLabelFont (do ("Arial", 12));
  
  final BarChart < number, String > barChart = new (BarChart < number, String >
  xAxis, yAxis);
  barChart.setTitle ("summary of country");
  
  XYChart.Series < number, String > firstSeries = new XYChart.Series < number, String > ();
  firstSeries.setName("2007");
  firstSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(25601.34, AUSTRIA));
  firstSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(20148.20, BRAZIL));
  firstSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(10000, FRANCE));
  firstSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(35804.15, BRITAIN));
  firstSeries.getData () .add (new XYChart.Data < number, String >(12000, USA));
  
  Second series...
  XYChart.Series < number, String > secondSeries = new XYChart.Series < number, String > ();
  secondSeries.setName("2008");
  secondSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(57401.85, AUSTRIA));
  secondSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(41941.19, BRAZIL));
  secondSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(45263.37, FRANCE));
  secondSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(117320.16, BRITAIN));
  secondSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(14845.27, USA));
  
  Third series...
  XYChart.Series < number, String > thirdSeries = new XYChart.Series < number, String > ();
  thirdSeries.setName("2009");
  thirdSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(45000.65, AUSTRIA));
  thirdSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(44835.76, BRAZIL));
  thirdSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(18722.18, FRANCE));
  thirdSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(17557.31, BRITAIN));
  thirdSeries.getData () .add ((in English only)
  new XYChart.Data < number, String >(92633.68, USA));
  
  Addition of serieses to barchart
  barChart.getData () .addAll (firstSeries, secondSeries, thirdSeries);
  
  Scene = new Scene (barChart);
  stage.setScene (scene);
  stage.setTitle ("Histogram");
  internship. Show();
  }
  }

  See tables to style with CSS documentation-online http://docs.oracle.com/javafx/2.0/charts/css-styles.htm#CIHGIAGE.

  Fonts and the location can be changed via the - fx - police-* css types and -- translate - fx * types (see http://docs.oracle.com/javafx/2.0/api/javafx/scene/doc-files/cssref.html).
  Code can be validated at the clearer in the forums if surrounded by markers of code between the brackets.

  Info of the axis can be looked up and changed via css as below (since the graphics to style with CSS documentation):

  .axis {
      -fx-font-size: 1.2em;
      -fx-text-fill: #462300;
      -fx-tick-label-fill: #914800;
      -fx-font-family: Tahoma;
      -fx-tick-length: 20;
      -fx-minor-tick-length: 10;
  }
  

• Change the axis labels

  Hello
  
  Is it possible to change the labels of the axis on the length? Because we designed a graphic page where the SQL statements can be created dynamically. So the axis labels must also be changed. But I couldn't figure out how to make...
  
  Thank you
  Osman...

  Hello

  You can create hidden item dynamically set you the value.
  Then use point as below on the attributes of table settings Axes

  &Px_MY_ITEM.
  

  Hope this helps and is what you are looking for

  BR, Jari

• Format of the axis, 2 lines of graph

  I work with a XY graph with time on the x-axis and I have a question about formatting options.  I can include the date and time, but they are written in a single line, reducing the number of main graduations I have for a given size chart.

  Is it possible to include a line break or ramasseherbe return so that the date and time are written with 1 above the other?  I tried to use/r or/n, but these were simply written in the axis tick labels.  Is there an escape code to use, or is this not possible?

  It is not a "/ r" or "/ n" (slash), but '\r' or '\n' (backward slash). And, when you write your constant on the comic, you must format the string in the menu on the right - click with the button drop down as "------Codes view ' or you will literally '\n' (if you then look as" Code------"you will see"\\n").

  Cameron

• Change the axis label w.r.t. the scale automatically in the waveform graph

  Hello

  Is it possible to change category axis labels and the value the axis according to the scale automatically? I have a waveform graph which is automatically resized and values on the y-axis of milli, micro and nano volts according to the results of the output from the tests carried out. I need the label of the axis to change automatically according to the scale... Could someone tell me please how to do this. Thanks in advance.

  Best regards

  Julien

  Alain,

  I don't know exactly what you want.

  If you want to just scale to change as follows: 10n or 5u, use the property format scale IF the Notation.

  

  If you want to change the name of scale label text, you use the YScale.NameLbl.Text property. The attached VI shows one way to do something like that.

  Lynn

• Format of the axis

  I'm having a problem with the Push Notifications from my server. I think it has to do with the PIN device, but I'm not sure.

  Basically I can send notifications fine if I use

  . If I try to use the PIN device, I get the following error:

  
  http://www.openmobileallian
  ce.org/tech/DTD/pap_2.1.dtd">
  

  The PIN device that I use is a 9 digit "digital chain". I get the PIN using DeviceInfo.getDeviceId ();

  Anyone know what I am doing wrong?

  So, I guess that I did everything correctly, EXCEPT conversion in chain PIN.

  Found this on another forum, just in case someone else has this problem:

  String PIN = (Integer.toString(DeviceInfo.getDeviceId(),16)).toUpperCase();
  

  So, it's about as clear as mud.

  At least it's working now.

  Massimo_olive thank you very much for your contribution. I really appreciate it.

• Design of the Vertical axis labels

  Hi all
  
  I am a newbie to Flex and has difficulties with a BarChart, where the vertical axis labels are small enough to be almost unreadable. I would like to increase the EIS of the labels, while keeping the overall size constant.
  
  I've added an AxisRenderer to the vertical axis and specified a styleName with a fontSize 10. The effect has been to reduce the size of the labels even more! (In fact, the mere presence of the AxisRenderer without a specification styleName was sufficient to cause this additional reduction). Later, I defined a color in the style just to check that the style has been applied (if only partially).
  
  Is there a better approach for dimensioning of the axis labels? I'm using BF 3 Beta 3. Thanks in advance for your suggestions.

  A-ah! gutters!

• ScatterGraph does not manually change the axis to execution interval

  I use the ScatterGraph and the WaveFormGraph in VS2010 Winforms application.  I have the interaction mode axes set to EditRange.  The WaveFormGraph command allows to edit the axis range by clicking on the end of the axis labels and modify them.  ScatterGraph control is not even though the documentation I've read says it should.  The mode of the axis does not seem be the question that I have changed between fixed and AutoScaleLoose (which is not the choice to have everything showing changing data, if you want your range entered manually to maintain).  I tried a new project with a ScatterGraph control with the default settings and checked that it does not change the axis interval.  Is there a way to change the settings to allow you to manually edit a ScatterGraph range in this way when running?

  Thank you!

  Hi Lybro,

  You have activated the "EditRange" of the graphical object of point clouds InteractionMode? There are two places that the mode of interaction is defined, one for the axis and the other for the scatter chart, both must be enabled for writing at work. I just tested this with Measurement Studio 2013 and it works. Let me know if it helps.

  Kind regards

  Kevin

• Axis label question

  My application creats personalized graphics using AS3 and a mySQL database. Almost all of the graphics make it very well, except that I have one that is supposed to set its min vertical axis at 0% and its maximum to 75% with intervals each 25%, and yet its labels make in the form of 0%, 30%, 50% and 80% instead of 0%, 25%, 50% and 75%. Data and grids are correct, just the axis labels are wrong. If I set the min to something other than 0, the labels are fine. This seems to be a problem if the interval is set to anything other than 5 or 10 (like 15 or 25). Can someone tell me whether it is a bug of Flex or if this problem could be caused by something else? This happens on a development server and the server, and there are a couple of other graphs that have this same problem.
  
  The graph in question can be seen at http://www.communityindicators.ewu.edu/graph.cfm?id=106.
  
  Thanks in advance for your help.

  Yes, I solved this problem!

  I had to put the maximumLabelPrecision to the LinearAxis.

• Hide the first and the last Division in the WPF chart axis

  I want to hide the default marker of the first and the last major division in an axis of a chart of WPF. I tried to extend RangeDivisionsMode and define my own class object to the MajorDivisions.Mode property on the axis. But even when I returns a list empty in RangeDivisionsMode.GetDivisions(...), the first and the last marker is drawn.

  Thanks in advance, Jonas

  The minimum and maximum labels are transmitted separately when displaying a scale (even if technical RangeDivisionsMode custom can be used for the minor divisions).

  There is no direct configuration option to hide extreme labels, but you can achieve this effect by initializing the LabelPresenter property on MajorDivisions by a custom implementation:

  class CustomFormatter : GeneralValueFormatter {

        protected override UIElement VisualizeCore( TData value, ValuePresenterArgs args, UIElement existingVisual ) {

            UIElement element = base.VisualizeCore( value, args, existingVisual );

  var axis = (Axis)args.Context;

            Range range = axis.Range;

            var comparer = range.Comparer;

            bool isExtreme =

                   comparer.Compare( range.Minimum, value ) == 0

                || comparer.Compare( range.Maximum, value ) == 0;

            element.Opacity = isExtreme ? 0.0 : 1.0;

  return element;

        }

    }

• Secondary axis on the WPF chart

  Hello

  I'm tracing a secondary value axis on my WPF chart. I have a graphic linked to a table of AnalogWaveform of objects that I change during execution. This table can be different sizes depending on the user's selection, however assume that there are two types of data to the chart.

  I would like to match a data type of my main axis and the other guy to my axis is secondary. For example, I have four AnalogWaveform opposes the plot, two of whom are in Hz (primary) and the other two in Volts (secondary).

  According to the documentation, I need an additional of element under my definition of . What I have is:

  This adds a second value axis to the left of my main axis. What I need is for this axis which will be located to the right of my chart and somehow to draw each AnalogWaveform on the right y-axis.

  I build my locations in the code as follows:

  
  
                  _graph. Plots.Clear ();
  
  
                  RawData is my AnalogWaveform[], built in advance based on a response from the server
  
                  foreach (AnalogWaveform waveform in RawData)
  
                  {
  
                      If (waveform! = null)
  
                      {
  
                          field = new plot (waveform. ChannelName);
  
                          parcel of land. DataContext = waveform;
  
  plots. Add (Plot); plots is a simple list
  
                      }
  
                  }
  
  _graph. Plots.AddRange (studs); Add locations to graph
  _legend. ItemsSource = plots. Add locations to the legend

  Any help would be appreciated on how to do it.

  Thanks in advance.

  To position your second Y axis across the graph, set the Location property on the axis of Far .

  To associate a plot to a default axis, set the VerticalScale property on the ground in the axis value is appropriate.

• Problem formatting Scatter the chart axis

  All,

  I'm trying to format axes on an XY scatter chart to display 0.0% vertically and horizontally to OBIEE 11.1.1.7.140527 0,0. I tried to set the format in the properties for chart point as well as the properties of column cloud (using these two formats appear in the list and the custom) and none of these approaches to return the correct format. The numbers keep appearing without formatting - that is, 90.0% appears to be 90 on the vertical axis. Also as a record, when I fly over the points of real data on the graph, the values are made 1 decimal place (so I know that they are not truncated), but the % does not appear after the vertical data point.

  Does anyone else have this problem? If so, how to solve it?

  Thanks in advance for your help.

  Thanks for the photos (make it easier to visualize exactly what you are looking for).

  The strange thing is that I'm trying now to build a chart like yours, and all defining the format of my vertical measurement in % place you in the y-axis % and keep the axis X for normal numeric values.

  And I also found (mistakenly) where you can force the graph to display the % on axis Y.

  

  There is a problem during the definition of % in the property "Abbreviations": your measurement is 0 = 0 and 1 = 100%.

  If on the other side, that get in shape column or a percentage in the criteria tab measurement is 0 = 0%-100 = 100%.

  

  I use exactly the same as you, OBIEE and defining the format of data in the criteria for my Chronicle of the axis tab of Y of the clouds of points automatically graph showed me the values of %.

  

  There is an additional "detail": you lose % if you don't have a column in the 'Points' of the graph area, but you moved your column to "vary By color.

  If bring you a column 'Points', the % will be on the Y axis, if you have a column only in the "color vary by" you lose %. You can get them back by using the properties of the axis, but don't forget to add a 100 to your measurement (and on the mouse on the screen data will be skewed as it will show % 0-1 instead of 0 to 100).

  So I suggest to add a second instance of the same column that you use in "color vary by" and put in the area of 'Points '. % will return and you keep multiple colors. On screen, a mouse you have twice the same value on the screen, but it's probably smaller questions that you can live with if you get your good axis.

  

  (PS: I hope that makes sense...)

• WPF, is there a way to link the label of the axis

  I have this XAML and I was wondering if there is a way to change the label of the axis of GHz to something else programmatically.  I tried the usual link and it did not work.

  It is just easier to use a TextBox control on the same place?

  Thank you!

  With the help of Content="{Binding LabelX}" in the LabelTemplate won't work if Label is defined on an object with a property called LabelX . I think that what you want is something like this:

  Label="{Binding LabelX}">

        

            

                Content="{Binding}" />
  
              
  
          
  
      

• Add the label of the axis to a chart in the report of the word

  Hello

  Is there a way to add a label to the axis of the graph in a word of the report? Thank you!

  Tom

  It is of course not very intuitive to use the word graphic Set make vi to set the label of the scale.

  Use xlCategory and title of entry to affect the scale label x and use xlValue and title of entry to set the label of scale there.

  It would have been nice and easy to add an entry to set the orientation of the text (just adding an argument in the node of the axis title property).

  Ben64