WPSM54G bad firmware update, please help!
Like my new printserver wasn't doing his job. I went on the site Web of linksys read many questions and tips and forums abot problems with vista etc etc,.
In fact, the only required for me was to set the printserver as ip tcp for a HP plotter designjet printing solution.
The problem was that the print job does ' don't stop when the page was sen't and he keept print again and again the same work.
Yes, according to some advice I downloaded the firmware upgrade for the product... Unfortunately something during the firmware upgrade process was wrong... my print server no longer works...
I need help to go back or to reset the firmware or something to access the printserver (telnet)?
Any help would be much appreciated.
Thanks in advance
Sorry for my bad English writing.
Alejandro
Reset print 30 seconds the server and reconfigure the device again.
Tags: Linksys Products
Similar Questions
-
WRT160N problem, Cant update firmware (downgrade) PLEASE HELP!
At this router running for a few weeks. Its got that * beep * problem connection but just today, it is even worse. Every 30 seconds or so, he will lose to the modem and internet connection for about 2 seconds. So even if I try to update my firmware up to 008 I don't get the chance. The upgrade gets about 50% of fact and then I lose internet and it fails. * beep *? Please please please help
You must not be connected to the internet while doing an update of the firmware. Just the computer cable connected to the router and that's it. Try the upgrade again to 008.
-
Impossible kb2530548 update please help me...
Hi, I got an update for security update Cumulative for internet Explorer 7 for windows vista x 64 based system kb2530548 and it gives me an 8007371 error code and this happened for months I even can't update browser explorer 8 or newer what can I do please help me thank you
Hi OctavioRodriguez,Method 1: I suggest you to try the procedure described in the link and check if this is useful:MS11-050: for Internet Explorer Cumulative security update: 14, 2011
Method2: you can try the procedure described in the link and check if this is useful:How to reset the Windows Update componentsMethod3: You can try the procedure described in the link and check if that helps, by following the link:you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
Remplacement4: You can try the procedure described in the link and check if that helps, by following the link:Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
http://support.Microsoft.com/kb/957310I hope this helps. -
Windows Update is stuck look for updates please help
I get very frustrated because one of my programs usually open unless I do an update of the platform, but when I try to update my computer is just stuck to 'check updates' and its been like that for more than a day. I don't know what to do, I called the support microsoft product, and even that they did not help. This is a new computer with windows 7 pro. Please help me I am very frustrated.
3020369 is only a prerequisite for the KB3172605, a criticism:
https://support.Microsoft.com/kb/3172605
Best regards, VZ :)
-
SE issues updated - please help!
Hello
The update server is not responding. The server may be offline temporarily, or the settings of firewall or internet is perhaps incorrect.
The above message whenever I try to update in the pane creative cloud ofl. It starts to update and then fails.
Since the Adobe Application Manager , I ticked just an update - and it worked. I can't get the Adobe Application Manager to return to the top - How to open It so that I can check another update?
I lost an entire morning trying to solve this problem... is not happy. The interest to be part of the cloud was to update hassle, it's ridiculous. I noticed, forums for reading on the web, a lot of people have the same problem. Please help me make this update of race thingy smoothly.
Petra
Just found out that you can open the Adobe Application Manager PS CC prog - click: help /updates in the main menu. It seems that I have to install an update at the same time - since Adobe Application Manager - BUT what matters, first leave the creative cloud Panel - as they seem to conflict. Sorry for the tone of the comment above - I didn't know that I was on a community forum, I thought I was asking Adobe directly.
-
This problem is driving me crazy, go round in circles, trying to use microsoft update to help. No help for the moment... Error 0x8009310B code is on the rest the updates failed.
mentioned, check if it helps.
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100 MissCats Hi,
- Do you have the latest changes on the computer?
- You have security software installed on the computer?
Method 1
I suggest that reset you the default Windows Update components and later try to install updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Also check out the article below and try the steps
Method 2
If the previous step fails, then I suggest you temporary disable the security software installed on the computer and install 5 updates at a time, to check if it helps.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
-
My laptop will not install updates, please help?
I have an old compaq laptop for 2 years and I sent it to corrected and to fix the problem, they had completely restart the computer, and when I run windows update told me I need to install an update to be able to get more updates, it installed fine, but when it checks the updates it does not find the latest update, he was able to install was published in 2007 and none in 2008-2009 and this concerns me because desktop Gets a new update every day, is that this problem will be solved?
PS its market on vista
Hello
Run these two.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool
and for Windows 7
http://support.Microsoft.com/kb/947821Check Control Panel - Windows Updates - on settings on the left side.
When you run Windows updates (after the above) are there any error messages?
Hope this helps.
Rob - bicycle - Mark Twain said it is good. -
can't go beyond logon after installing critical Microsoft updates, please help!
G6-1331sa laptop. Windows 7 Home premium 64-bit.
After installing critical updates of microsoft for the first time after initial start-up, I couldn't go past the login screen. I turned off the laptop and rebooted in safe mode and restored to a save point. the laptop works now, but I'm worried about these essential updates that are still waiting to be installed (43 in total). Since this problem I used intsalled and hp support assistant recommended updates in the hope that this would better the case. the problems that I remember, when I checked the events in safe mode, surrounded mainly around updates NET framework 4.0, but there were a couple of other issues surrounding the other updates, but do not remember speciifics. If anyone can help me with this question, I would be extremely grateful!
Hello
Yes, Microsoft can be a royal pain @ times, but we love them so much, so what you need to do is choose the updates 2to3 or 4to5 @ a time, reboot the new laptop as needed. It's the safe way only to avoid a painful failure, OK? Try to update the elements who first of all the .net and then move these heavier MDPU later.
"I'm a volunteer!"
If it was a rattler...
-
My AVG free Internet security 2013 just expire and alert Security informed Windows that I have no protection against the virus.
In another finding, I note that it says that you should not have more than one market protection, they will conflict and slow down the computer. I thought I had with Windows and Firefox. My TalkTalk broadband services provider, may also provide protection. How can I get it sorted as soon as possible with a free antivirus? I am a novice and the grandmother and worry about safety online. Thank you.No Trusteer Raport is completely different and concerns authorizing bank transactions.
Also note Trusteer post report when overwhelmed sometimes is involved in Firefox crashes so if you have accidents are trying first of all the update and then if necessary uninstall Trusteer.
-
Impossible to find my 6000 hp sound card after updates please help
Hi I have a hp g6000 that had her work when I had vista prem SP1, but now I have service pack 2. the laptop can not find any soundcard at all?
If you have any ideas please let me know and thanks for your timeHello
I suggest you to reinstall the drivers for the notebook and check.
-
cannot check for updates or install it Please HELP
My problem of update is underway for all years.sometimes 2, I get an error that States (install new windows 1138506a-b949-46a7-b6co-ee26499-fdeaf software update Please HELP!
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058 -
Admin page makes terribly after E4200 firmware updated to 1.0.04)is
Hello, as my name suggests, I am really not in my area of expertise... I had a few rather poor performance on my E4200 about the range and connectivity, so I thought that it would be a good idea to see if a firmware update might help. The upgrade went out with ups hick (depending on the router), but the admin page is unnecessary after the upgrade:
Happens on Firefox and IE (latest versions)
Anyone else experienced this? Have any pointer on how to solve?
Ahhh... Restarting the computer fixed oooppss it...
-
After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...
Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.
(1) restart you device.
(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.
(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.
(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4
(5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.
(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).
(7) try the device on another network, i.e., neighbors, the public coffee house, etc.
(8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).
https://support.Apple.com/en-us/HT201252
(9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.
-
Update graph HP Slimline? PLEASE HELP!
Basically, I have hp slimline and the graph is crap... so what I want to do is to update, but I do not know what graphics card will work with her! and I know I need map profile there because the food is crap to...
the games that I really want to play is Call of duty balck ops, mw2 to the adjustment of the height, bad company 2 and more games! and also I know that this called HD5450 graphics card and I'm not sure it will work!
Thank you for any help, because I do not think to buy a new pc! and if you don't have any idea of the graphics card update then leave because I don't want not any information of falls
Here is my system to the Mint:
current system: Windows 7 Home Premium 32 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
Language: English (regional setting: English)
System manufacturer: HP-Pavilion
System model: NQ807AA-ABU s3811uk
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel (r) Pentium (r) Dual CPU E2220 @ 2.40 GHz (2 CPUs), ~2.4GHz
Memory: 3072 MB RAM
Available OS memory: 2942MB RAM
Page file: 1355MB used, 4525 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
DPI setting: Using System DPI
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7601.17514 32 bit Unicode
Card name: NVIDIA GeForce 7100 / NVIDIA nForce 630i
Manufacturer: NVIDIA
Track type: GeForce 7100 / nForce 630i
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_07E1 & SUBSYS_2A6510...
Memory display: 1336 MB
Dedicated memory: 121 MB
Shared memory: 1214 MB
Current mode: 1600 x 900 (32 bit) (60 Hz)
Name of the monitor: HP 2009 series Wide LCD Monitor
Monitor model: HP 2009
Monitor ID: HWP2827
Native mode: 1600 x 900 (p) (60,000 Hz)
Output type: HD15
Name of the driver: nvd3dum.dll
The driver file version: 8.17.0012.7533 (English)
Driver version: 8.17.12.7533
DDI version: 9Ex
: Model WDDM 1.0 driver
Driver attributes: Final retail
The pilot/size date: 25/05/2011 08:24:42, 11992680 bytes
Would be WHQL logo: Yes
Date stamp WHQL:
The instrument identifier: {D7B71E3E-44A1-11CF-E16E-690A1CC2C535}
Vendor ID: 0x10DE
Device ID: 0x07E1
SubSys ID: 0x2A65103C
Revision ID: 0x00A2So please help! And sorry for the bad English!
Hello
You can find more information:
Figure 1-Top view of motherboard
-
My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me
Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.
Where do you have the phone first?
Maybe you are looking for
-
HP Support Assistant v7.7.34.34 problem
I've recently updated the HP Support Assistant software on my HP ENVY 700-230qe PC (Windows 8.1) of the 7.4.45.4 version to the new version of 7.7.34.34 (such as published on the site of downloads of software and driver for my machine). To enable the
-
Transfer of pictures in the same resolution
I have a ton of pictures of vacation that I just edited (first photos most 25 MB). When I go to transfer them on a disc that they cross KB far the resolution that they are on my computer. I considered the export, but when I do that, I lose the date
-
The HID-compliant consumer control device
I have 2 PCs both running window XP. Recently, every time a PC is turned on, it always pup - up window and asking for "a new HID-compliant consumer control device" is and ask you to install the device driver.However, I can't find the driver - when I
-
I'm trying to re - install XP pro SP2 after a virus attack. I did a full format on my WD 160 GB hard drive. Serial ATA Mothboard Biostar G31 - M7 TE with the most recent BIOS. Generally, installation hangs when you attempt to load the file "teamw.
-
password BIOS HP compaq mini 110
Hello everyone. Can you help me get the password of the bios. I can't boot from my laptop HP Compaq Mini 110. After 3 hours of presentation bad password I have: CNU01843VN. Is there any master password which can help me to recover my laptop? Thank yo