Write only the range specified 2D table data to a string worksheet?

Similar Questions

• Conditional read only the rows in a table

  We have a requirement only under a certain condition (which may change each line), a line can be read only or editable and are uncertain how to implement this with APEX

  for example, lets say a table has the following features

  columns: ID, Date, editable

  1, September 12, 2015, Y

  2, September 15, 2015, Y

  3, 18 September 2015, N

  4, 19 September 2015, N

  5, 22 September 2015, Y

  Thus, when this data displays on a page in a tabular presentation, the date ONLY are editable for lines 1, 2 and 5. For lines 3 and 4, the date cannot be changed

  In the ADF, we get this by setting the attribute readonly on the date component to "row.bindings.Editable.inputValue =='N" ""-this would be evaluated by line and switch read only one or off for each date listed in the table.

  Help, pointers would be greatly appreciated!

  See you soon,.

  Brent

  Here is a link to a starting point: dynamic Action on a tabular presentation. Jeff Kemp on Oracle it shows how to condition the unalterable columns.  The same logic would apply only to a line level...

  Thank you

  Tony Miller
  Los Alamos, NM

• Take the minimum value for table data

  I'm storing test data in a table, with the hope that I can output the minimum value of the data. So far, I have used the table of max/min but can't make it work how I want. The test runs continuously in a loop of the holder. I get the minimum values in the table, but I would like to change the number of samples that the table contains, before it generates a minimum. The other option is that I run the test for a period of time (e.g. 3 seconds) and the table stores the data for this time then output 1 minimum value for the entire period.

  My current configuration VI is attached.

  Very appreciated

  Chris

  The size of the array in your VI is determined by the number of samples that you collect in your DAQ assistant, who is now 100 samples.  Never more, never less.

  How many samples do you want before you determine the minimum?

  Maybe what you really want to do is to build the table in the while loop and store it in a shift register, and when the loop has repeated enough times, then you take the minimum of built table.

• Notice-EEG - ViewType VM list only the virtual computer in a data store

  All, it seems to be confused about something that should be easy.  I guess it stems from a lack of understanding of Get - view.

  I'm changing the script of v3 vCheck virtu-al.  In it, he uses the line below to obtain the views of the virtual machine.  I want only the views of the virtual machine in a specific data store.  I was able to change the rest of the code, but I'm stuck here.

  $FullVM = get-View - ViewType VirtualMachine. Where {-not $_.} Config.Template}

  I tried: $FullVM = Get-Data Center & lt; Data CENTER & gt; Notice-EEG - ViewType VirtualMachine. Where {-not $_.} Config.Template} without success. Following error:

  Get-view: the input object cannot be bound to all the parameters of the command either because the command does not

  input pipeline or entry and its properties do not match any parameters that accept entries of pipeline.

  On line: 1 char: 25

  + $FullVM = $DC | Get-View & lt; & lt; & lt; & lt;  -ViewType VirtualMachine. Where {-not $_.} Config.Template}

  + CategoryInfo: InvalidArgument: (Server Management Denver: PSObject) , ParameterBindingExcepti

  on

  + FullyQualifiedErrorId: InputObjectNotBound, VMware.VimAutomation.Commands.DotNetInterop.GetVIView

  Any help would be appreciated, Josh

  Try this

  Get-View -Viewtype VirtualMachine -Searchroot (Get-Datacenter  | Get-View).MoRef
  

• How to load data from matrix report in the base using ODI table data

  Hello
  
  How to load matrix report data in the base table data using oracle Data Integrator?
  
  Description of the requirement:
  
  This is the data from matrix report:

  JOB                       DEPT10                DEPT20  
  ___________________________ _____________
  ANALYST                                           6000
  CLERK                   1300                     1900 

  Need to convert it to the format below:
  

  JOB                             Dept                        Salary
  _____________________________________________
  ANALYST                  DEPT10      
  ANALYST                  DEPT20                     6000
  CLERK                       DEPT10                    1300
  CLERK                       DEPT20                    1900
      

  Thank you for your help in advance. Let me know if any other explanation is needed.

  Your list seems to be a bit restrictive, you can do much more with the procedures of ODI.

  If you create the new procedure and add a step. In the 'source' tab command you define technology and pattern according to your source database. Use the unpivot operator as described in the link, please, instead of using "SELECT *' use the column names and aliases for example:"

  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  Then in your tab 'command on target' defined technology and drawing on your target db, then put your INSERT statement for example:

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  VALUES
  (
  : job,.
  : deptsal,.
  : saledesc
  )

  That's why you use bind variables from source to load data into the target.

  Obviously if the source and target table is in the same database, you can have it all in a single statement to the "command on target' as

  INSERT INTO job_sales
  (employment,
  deptsal,
  saledesc
  )
  SELECT workstation,
  deptsal as deptsal,
  saldesc as saledesc
  OF pivoted_data
  UNPIVOT)
  deptsal-<-->
  FOR saldesc-<-->
  IN (d10_sal, d20_sal, d30_sal, d40_sal).<-->
  )

  also assign the log count "Insert" on the tab corresponding to your INSERT statement, so that you know how many rows you insert into the table.

  I hope this helps.

  BUT remember that this feature is out in Oracle 11 g.

• Get only the first line of duplicate data

  Hello
  
  I have the following situation...
  I have a table called employees with column (object, name, function) where "re" is the primary key.
  
  I import data within this table using an xml file, the problem is that some employees may be repeated inside this xml file, which means, I'll have repeated "re", and presents the columns is a primary key of my table.
  
  To work around this problem, I created a table called employees_tmp that has the same built as employees, but without the primary key constraint, on this way I can import the XML inside the employees_tmp table.
  
  What I need now is to copy that data employees_tmp used, but for cases where the "re" is taken, I just want to copy the first line found.
  
  Just an example:
  
  EMPLOYEES_TMP
  ---------------------
  RE FUNCTION NAME
  ANALYST GABRIEL 0987
  MANAGER GABRIEL 0987
  RANIERI ANALYST 0978
  VICE PRESIDENT RICHARD 0875
  
  
  I want to copy the data to employees looks like
  
  EMPLOYEES
  ---------------------
  RE FUNCTION NAME
  ANALYST GABRIEL 0987
  RANIERI ANALYST 0978
  VICE PRESIDENT RICHARD 0875
  
  How would I do that?
  
  I really appreciate any help.
  
  Thank you

  Try,

  SELECT re, NAME, FUNCTION
    FROM (SELECT re,
                 NAME,
                 FUNCTION,
                 ROW_NUMBER () OVER (PARTITION BY re ORDER BY NAME) rn
            FROM employees_tmp)
   WHERE rn = 1
  

  G.

• How to read/select only the records from a table with non-English characters

  Hello
  I need to find all records in a table with non-English (mainly Chinese) characters in at least one of the varchar2 columns. Let me kow if someone knows a way by which it can be done using SQL/PLSQL.
  
  Best regards
  Imran

  select * from your table
  where your_column != convert(your_column, 'UTF8', 'US7ASCII)
  

  Replace UTF8 with your database character set

  Published by: thtsang on October 15, 2009 03:53 - unequal sign change of! =

• When you set the outgoing SMTP server, why not specifying the SMTP server 'by' is not working, but only the first specified server?

  I have several options for the outgoing SMTP server. I put a default and attempt to send. It fails and uses the first condition in the list.

  I restart Thunderbird and try to send. It uses the first condition in the list.

  I eliminated all SMTP servers in the list but the one I want, and it works.

  What escapes me, that I have observed this problem on all my systems for a long time?

  Kind regards

  Carl

  your lack of anything that account having a SMTP server associated with them, which, if your 'in' an account more wrinkles 'default '.

  Right click on a folder in account, and then select settings.
  Click on the account name in the settings and on the right is a drop down list and the value 'default' smtp for this account.

• Read a record of file and write to the database.

  Hello
  
  I read a file using a file adapter and write to the database using DBAdapter table. In BPEL, I used activity to receive the entry from the file and call activity to call dbadapter.in between receive and call I used activity activity of transformation of transformation.the problem is that, after deployment it.i get following error two errors:
  
  (1) no recoverable system failure:
  < bpelFault > < faultType > 0 < / faultType > < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > Exception is is produced when the link has been invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < Summary / > < / part > < part name = "detail" > < details > error location JCA resource adapter. Unable to locate the adapter of JCA resource through the element of the binding file .jca & lt; factory connections / > The JCA Binding component is unable to startup of the resource adapter specified in the & lt;-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or 2) the "& lt;" jndi name > ' element in weblogic - ra.xml has not been defined in eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then restart the application server < / details > < / part > < part name = "code" > < code > 12510 < / code > < / piece > < / bindingFault > < / bpelFault >
  
  2 non recoverable system fault):
  Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). ReadWriteDB:WriteDB [WriteDB_ptt::insert (MydbCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / > The JCA Binding component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = 'EI, DB, null. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the application server WebLogic or 2) the element '< jndi name >' in weblogic - ra.xml has not been set to eis/DB/null. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
  
  Please suggest how to solve.
  
  Thank you
  
  Tejas

  Check your source data and your connection adapter db adpater deployments factory.
  Check if you have configured all steps of http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/life_cycle.htm#BABBEDBF.
  Also, in your file .jca in your jdeveloper have named the location of connection-factory as "ist/DB/draw ' if so change it to one that you have created in the db adapter deployments.

• Tables and table data

  Hello-

  How is it when I create a node of a table property value and build a table of this node of property value, it gives me an annexed table?

  I tried indexing in this table twice for a single row of values, but when I try to compare the 1 index of this row in the table with the

  first index value from an array of the same size, the equal sign will not indent the table created index from the table. I see that the

  output wire is pink, which means that the value is considered as text... How can I convert that to a number so that I can compare the first value of a line

  in a table of the first value of a picture of a line to determine if they are equal? Array index is fed data points from

  a graph and once this 1st value of the array index is the first index value of the row in the table, I hope to have the index given in the table

  turns green when there is a football game. Thank you.

  Hello

  I'm not absolutely sure I knew you. Displaying a VI or a screenshot could be useful...

  However, attached, you will find a simple VI compare the first value of a table wanted the first value of a table row.

  Note that the table data type is string, not digital. No matter if you put numerical values in the table there are always string. A conversion is necessary to compare the values in array of numeric values.

  The values in the table are displayed as a 2D array in which the first dimension contains the lines (x).

  I hope I could help you with that.

• Filter for table data, the range of data obtained and defined 2D

  I produce data of an ultrasonic sensor at 1 K Hz, and there is a lot of data (data points range of 0 to 10). However, in some cases when I know that the data should be about 7 (for example) I get outliers (about 9 and 10). Is it possible to define a filter for data in the defined range.

  I averaged the data to get an average value, and outliers are distorting. In the worst case, my outliers are 30 to 40% of the data generated. I created a filter to sort the data and, taken from the lowest value. I stop the loop when data reaches a value greater then 9. But this seems to take a long time (because the loop checks for each data point and there are 1000s of them).

  Is there a better way to filter data and define a predefined table range to collect?

  I enclose my filter.vi... and a set of samples of my previous data. The ranges of data of 10-8 and would like to have the range 7.5 to 8.5 to consider. The sensor records tension here and the problem can be solved by installing a different type of sensor, but if a filter in LabView can due it, the sensor that we use now is absolute.

  I am in kind of emergency, my design in unfinished because of this problem, if someone can find some time to share some suggestions, I will be grateful.

  Thanks in advance.

  See attachment.  I have incorporated the data you've posted in the vi.  It doesn't seem like any data were less than 8.7 or so, so I modified the scope so it would be a few points on average.  Some games were completely out of reach while the average came back like NaN (not a number) due to a division by zero.

• I want to write data of type string in the 2D table outside. How can I do?

  I want to write data of type string in the table outside. How can I do? Help me please!

  Could you explain your question more clearly, including a photo showing what you're trying to do?  I don't understand what you want.

• Suppose I have a table emp that has thousands of lines of data. In this table, I have to get only the employees whose salary is equal.

  Hello world

  Suppose I have a table emp that has thousands of lines of data. In this table of employees receive wages between 1000-10000.

  Now I have to get only the employees whose salary is equal.

  for example

  empNo empName sal

  -----------     -------------      ---------

  1 ram 5000

  2 5000 Shyam

  3 1000 Dilip

  4 deepak 2000

  5 sisi 1000

  6 1000 Priya

  so now...

  Now without using ' select * from emp where Sal IN (5000,1000). "How can I get these employees with the same salary?

  SELECT *.

  EMP e1

  WHERE EXISTS (SELECT 99 FROM emp e2 WHERE e2.sal = e1.sal AND e2.empno! = e1.empno)

  or maybe

  SELECT *.

  WCP

  WHERE sal IN (SELECT sal FROM emp GROUP BY sal HAVING COUNT (*) > 1)

• Issue of table + write to the file

  Hello, I am using USB-6009 with Labview 8.5

  I searched and passed tutorial table and still confused about acquisition of data...:)

  So here's what I'm doing (simple)

  I have two tension analog (AI0 AI1) returns through the DAQ assistant

  and I would like to follow up respectively and finally want to write them in lvm format or csv format...

  Question 1.

  Can I have an example of table VI with the DAQ assistant? all the tutorials I went on

  they are only about numbers--not the dynamic data...

  I think of... convert data into DBL and reorganize somehow to each table to the graph of the monitor

  Question 2.

  so I cut the data by using the table to display the monitor, then I will add both the value of the data in table

  to write to the file? or... is it possible to write in the file directly from the Daq Assistant, write on the file VI?

  Quesetion 3.

  If so, could you tell me how this writing on a file to save the data? 1st column with odd rank-> AI0

  1st column with the same line-> A1... something like that?

  Thanks, I spent about 3 hours of that, google them, read the help of labview and helped a lot

  1. you should be able to double-click the convert to Dynamic Data and convert the waveform in a table.

  2. just connect the output of the VI DAQmx Express write it on the Express VI of LVM.

• 2 channels of AI on a data acquisition with the range of different sensitivity

  This vi is based on the 'new project' state machine on the home screen at the start of LV.

  A time loop is parallel to the main loop of the state machine, shown in the picture.

  It works continuously until you press the Exit button.

  The problem seems to be in start this... > read >... stop start > read >... stop along the error line.

  The reason for this clumsy arrangement power is measured voltages are in two lines of different sensitivity.

  The shunt voltage is small and needs-. 2 to the range of V.2. The load voltage is greater and 09:50 V range is good.

  In the initializing state, two separate vi 'create a channel' have been used to specify the range of voltage to the physical channel. The corresponding tasks are sent via via local variables.

  DAQmx errors happen randomly, sometimes the first iteration, sometimes the 50th.

  I tried to disable one or the other start > read > stop for the shunt voltage or load.

  I tried replacing them with the DAQ assistant.

  I tried various DAQmx vi: "wait" and "accomplishment of the tasks by resource cancel selected".

  But error-50103 "specify resource is reserved" keeps popping up.

  Is it possible to create two tasks on the device even when they are not used at the same time?

  The only reason is to measure in two voltage ranges.

  Win 7 Pro 64-bit

  2014 LV database

  Data acquisition equipment: USB-6210

  Thank you.

  This has been discussed many times. Do NOT use separate tasks. You can use different ranges for different channels with a single task. Just wire the task from one channel to another channel to create task.

  You also use local variables when they are certainly not needed.