Writeen r of the changes on the destination disk

Similar Questions

• AppAssure BMR cannot find the Destination disk.

  I am preforming a bare metal restore material disimillar and Appassure cannot find the drive on the target computer.

  Restore dell Poweredge R430 13g. The discs are in a controlled by a H330 PERC RAID 1.

  Is there something I am missing, usually displays the disc without any problems?

  

  Thanks for the support!

  Inject you the Perc controller drivers in the boot cd when it was created? If this isn't the case, then this is probably the issue.  He can't access the storage controller so he can't see the disks.

• Saving PDFs: I would like to be able to change the name of the file and the destination of the downloads without jumping through hoops.

  I download a lot of PDF files and I organize their file name. I want to record on my computer to read later. When I have a PDF document is opened in the browser, it's particularly embarrassing. As it is, I have two options:

  Save the file:
  This automatically sends the file to a temporary folder to download, which Windows will not let me access without memorizing the exact location. It also saves automatically under the default file name, I never keep. If I use this option, I have to go back and manually move the file in my documents and rename it.

  Open the file:
  This opens the file in a new window from Adobe (while simultaneously recording to the same temporary folder). I have to open the file in the browser, and then open it in a new window, then hit save slot, then PDF, then change the destination folder (because the default value is the temp folder) and name of the file.

  Please, give me manual control of downloads! I want just a save as option.

  Is it possible to right click on the download link and use Save Link as...?
  Who will have the choice of "off-site" hands of Adobe.

• HP OfficeJet Pro 8600 AIO: Cannot 'Edit analysis jobs' to change the destination folder scans

  Hello

  I just installed it on my new Macbook, but somehow I can't change analysis tasks. Once I click on this button, I get an error that says I have no scan software installed and he directs me to the HP download page. But, the download-only "HP Easy Start', which I installed it there. See the printscreen below.

  I already deleted and reset the printer and re-installed the software several times. The pilot is set to HP and not air one time.

  I want to change the destination of the scans folder, which should be in the settings after scan tasks, that I can't reach.

  What's wrong?

  

  Hello

  Download and install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try changing the tasks of analysis once more and I want to know the results.

  Shlomi

• Envoy 5530: How can I change the destination by default ANALYSIS folder

  Cannot find the dialog box change the default destination ANALYSIS of My Documents to My Documents / scan my folder when you use the scan of the screen of the printer.

  Hello

  Please try:

  (a) double-click the desktop printer icon.

  (b) click on 'Advanced '.

  (c) click the "Destination":

  d click Browse, and then select where you want to set as default

  

  (e) click on apply... Ok

  Kind regards.

• ENVY 5530 - how to change the destination for the scans folder?

  I want to change where scan images end, and it is unclear how to do this in the manual or through available menus.

  Hey there @ratdude ,

  Welcome to the HP forums

  I understand that you want to change the destination of your saved scans, and I would like to help. In order for me to find the right measures to guide you, I would need to know which operating system you are scanning on (on your computer).

  Please let me know and I'll get back to you:

  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  I can tell you that the option is in the scanning software HP. If you run Windows, try looking under the options 'Advance' for the Destination of scanning.

  Have a great weekend

• Drive C is full, how do I change the destination to D drive?

  Original title: complete C drive

  How to change the destination drive to D: for all future downloads and facilities of new programs

  Hello

  D: is normally the recovery partition on most computer brands (Acer being an exception) and is used for these purposes:

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  The problem for entire C: drive:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• How can I change the destination folder to Windows Picture import in the Vista autoplay version. ?

  The destination folder somehow Autoplay went under the windows default 'Photos' parameter in a subfolder in 'Photos' when you use the option 'Import using Windows' Auotplay. Default AutoPlay program area does not choice for import folders, only actions to choose from. How can I change the default import folder back to 'Pictures' Autoplay when importing photos using Windows Vista import?

  If your Options to AutoPlay in Control Panel, Autoplay, devices, (your camera that there are listed) are defined to import pictures using Windows on the menu drop-down, then when you plug your camera you will get a low popup to the right of your screen.

  Click on Options, you will get an another popup that you can change the destination folder.

• Change the destination drive for burning music on USB (drive F) instead of cd (E drive)

  My computer says that I have both an E Drive for CDs and a F for the USB drive, but I can't figure out how to change the destination when I try to burn on the USB instead of the Conference on disarmament.  Does anyone have an answer?

  Thanks, ClintsMomma

  Hello

  What software are you using to BURN? Many software when we say burn, they find an optical drive valid to engrave on an optical disc. If you want to use USB, no need to burn, just copy as normal copy files from one disk to the other drive.

  Kind regards.

• RMAN duplicate grave crashes when I'm trying to change the paths of the destination

  Hello community,

  I am trying to duplicate a database of PROD for a test environment using the basic backup technique. I test the script in double and everything works fine when the paths of the database "auxiliary" (the database that I am creating) have the same paths as the basis of the 'target' (the database of production). If I change the paths, the double has failed because it does not find a backup of controlfile:

  channel ch1: from the restore backup set data file

  channel ch1: restore the control file

  channel ch1: reading of the backup piece PROD_cf_c-2175092736-20151204-0 c

  channel ch1: ORA-19870: error when restoring backup piece PROD_cf_c-2175092736-20151204-0 c

  «"ORA-19507: failed to retrieve the sequential file, handle ="PROD_cf_c-2175092736-20151204-0 c", parms ="»

  ORA-27029: skgfrtrv: sbtrestore returned error

  ORA-19511: error received from layer media manager, error text:

  < PROD_cf_c-2175092736-20151204-0 c > backup file not found in the NetBackup catalog

  This is the script that works, but if I have the same structure of directories in PROD and TEST (but this isn't a real scenario):

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  NOFILENAMECHECK;

  output channel ch1.

  }

  
  

  And this is the script that it does not work because I have the PROD and TEST different directory structure
  

  run

  {

  allocate auxiliary channel ch1 device type sbt;

  Send "NB_ORA_CLIENT = xxx NB_ORA_POLICY = xxx, NB_ORA_SCHED = Full_Diario';"

  duplicate database for TEST PROD

  until 'sysdate-2/24.

  SPFile

  control_files value ' / TEST/orabd1/ctl/control_PROD_01.ctl','/TEST/oralog1/ctl/control_PROD_02.ctl','/TEST/oralog2/ctl/control_PROD_03.ctl '

  db_file_name_convert value "/ PROD /", "/ TEST / '.

  the value log_file_name_convert "/ PROD /", "/ TEST / '.

  core_dump_dest value "/ TEST/oralog1/cdump".

  the value 'TEST' db_name

  Set diagnostic_dest ' /TEST/oralog2'

  instance_name must bring 'TEST'.

  all local_listener 'LISTENER_TEST '.

  Set log_archive_dest_1 ' LOCATION = / TEST/arch.

  the value of log_archive_dest_2 'LOCATION = NULL'

  ;

  output channel ch1.

  }
  
  

  I tried to restore a Netbackup file and it works. I try to duplicate a database when the structures of directories are identical and it works. Why it's a failure when I change the destination paths?

  Thank you!

  Marina.

  Hello

  We had a similar problem in our shop. In our case, that we never knew if she was related to Oracle or NetBackup, but we found a Bug of Oracle, so we think it was a problem with the Oracle.

  Bug 11783792  RMAN SEND command does not hold the value of the variable

  DOC - ID 11783792.8

  
  

  Rather than send 'NB_ORA_CLIENT = DCLI, NB_ORA_POLICY is BD_DC_2, NB_ORA_SCHED = Full_Diario';.

  try something like this:

  Run {}

  allocate channels ch01 type 'sbt_tape' PARMS 'ENV =(NB_ORA_CLIENT=DCLI) ";

  Send "NB_ORA_SERV =';"

  Restore settings

  output channel ch01.

  }

  Let me know if it helps.

  Kind regards

  Ferran

• Win LR 6.4 import/Add - cannot change the destination of the catalogue

  Using LR 6.4 and has several hard drives installed on my desktop computer.  LR (.lrcat) catalogs are on the G drive - and have always been on the G drive.  LR and Photoshop are also installed on drive G.  My photos are in the folders on the F drive.  My two catalogues are given due recognition in the preferences as being on drive G.

  When I use the import - Add command, LR allows me to choose the source, but immediately chooses the destination as "My catalog" C drive.  Although there is a small box next to the C drive, it is unusable and I can't find a way to change the destination.  If I use other commands such as copy, I am able to change the destination.  But whenever I load photos from a disc, I have for them to make a folder on the F drive and copy them from the disk to the new folder.  Then, I want to add these pictures to the catalog that is currently active.  I want to add them without moving... l

  I did a search for .lrcat and all the catalogs were on drive G, as they are supposed to be.  However, there is an entry on the C drive that is marked as a MS Word file and it is called: Lightroom assessment.docx.  A paragraph seemed more likely guilty, but I don't know if I should change it and if so, what to change:

  The application folder: G:\Program Adobe Lightroom

  Library path: G:\Lightroom Backups\June2015\June2015.lrcat

  \Adobe\Lightroom

  Settings folder: C:\Users\mg\AppData\Roaming

  Thanks for any help or suggestions.  Is to make the process even very frustrating catalog help

  No matter that one of your hard drives, the catalog is on. If this catalog is one that is active, then it is one which will contain references to imported pictures. When you use the add in the import dialog box images are added to the catalogue of their current location. You cannot specify a different destination when you use this option. When you use the copy option, then you are able to specify a destination in the right column of the import dialog box. You must choose the appropriate drive and the main folder in the folder tree that appears. Then, specify the name of the subfolder in the highlighted area:

  

  You talked about change the destination of the catalog. It was a poor choice of words or you don't understand how the catalog works. The catalogue is available in one place. Normally it does not move anywhere unless you choose to do it manually. You can control the destination of your imported images, and Lightroom will import to the destination on any hard drive. But they are managed using the catalogue that remains in one place.

• Change the destination directory during the installation of Acrobat Reader DC

  How can I change the destination path during the installation of Acrobat Reader DC? After the download and execution of the installation file, I can't make any changes and Acrobat Reader will always be installed on drive C (sys), but I would change on drive D (data)! Any suggestions?

  Hi martinm1975,

  Try Adobe - Adobe Acrobat Reader DC DistributionSetup offline.

  After the extraction process, you will get the option to change the destination file.

  

  Kind regards
  Nicos

• is it possible to change the destination of the 'data in local cache folder.

  Hello

  We use Indesign (CS5.5) in a XenDesktop Invironment. Every time when a logoff user history of the "last open files" are lost.

  I think that these data are stored in localappdata%\Adobe\ %... and get lost when logoff or restart the virtual computer.

  Is it possible to redirect or change the destination?

  Thank you for the help

  Best regards

  Dirk

  These MRU lists are stored in the registry or files in the user's preferences. Of course, if you restart your VM or the user does not have permission to store them permanently, this information will be lost. You use Group policies and system variables to point to other locations outside of the virtual machine. Nothing to do with Adobe at all.

  Mylenium

• change of destination for the download disk

  I'm running out of space on my c drive; deleted all of it adobe, then tried to download on my drive d, but he never gave me option to select a destination drive... What am I doing wrong?

  The download of the installer goes to your browser's default download folder.

  You can specify the destination to install (on Windows, at least) on the first Panel of the Installer ('Change Destination folder") offline, you can download on http://get.adobe.com/reader/enterprise/

  

• change the destination of the journal archive

  Hello
  10 g R2 on Windows
  I have this:

  SQL> archive log list;
  Database log mode              Archive Mode
  Automatic archival             Enabled
  Archive destination            P:\oracle\product\10.2.0\db_1\RDBMS

  And:

  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- --------------------------
  db_create_online_log_dest_5          string
  db_recovery_file_dest                string
  db_recovery_file_dest_size           big integer 0
  log_archive_dest                     string
  log_archive_dest_1                   string
  log_archive_dest_10                  string
  log_archive_dest_2                   string
  log_archive_dest_3                   string
  log_archive_dest_4                   string
  log_archive_dest_5                   string
  log_archive_dest_6                   string
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- --------------------------
  log_archive_dest_7                   string
  standby_archive_dest                 string      %ORACLE_HOME%\RDBMS

  How can I change the destination?
  Thank you.

  Or:

  LOG_ARCHIVE_DEST = 'new location'
  

  LOG_ARCHIVE_DEST_1 = 'LOCATION=new location'
  

  Please take a look in the doc:
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/archredo.htm#sthref1059

  Nicolas.