Writing has occurred in the primary and replica Volumes in VSA

Similar Questions

• Another thing appears and it says: "an error has occurred in the application. I hit restart request,

  I have a problem with my BSplayer. I'm trying to open a video and the BS 'bar' appears, but there is no video. Another thing appears and it says: "an error has occurred in the application. I hit restart request, it did not work. I also tried to see the bug report, but I couldn't understand him. Please help me. Moreover, it worked great yesterday. And I also tried with other videos but with the same result.

  Hello

  Uninstall/reinstall or you might ask their Support Forums.

  Cheer.

• Trying to open Bacup and restore: "an internal error has occurred. The parameter is incorrect. (0 x 80070057) »

  When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight.

  Hello Tjohanne
  Please write to the Microsoft Forums.

  This problem can occur because of a bad sector at the end of the volume that you are trying to save.

  However, as a workaround, you can try the following methods:

  (A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D.

  Run (B). disk check to check the hard drive
  Note: Please make sure that the DVD DRIVE is the first boot device.
  1. Insert the DVD of Windows 7 and restart the computer.
  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
  3. click on 'Next' and then click 'repair your computer '.
  4 Please, highlight 'Windows 7' and click 'next '.
  Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
  5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.

  C:
  CHKDSK /R

  Note: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
  6. Please let me know if an error is detected.

  C. now use another backup tool to check if you can back up files on the computer correctly.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  Hi Charles,

  
  

  It is specific to a particular file or all the files that you are trying to open, gives you the error.

  How you open the same file using Preview on Mac.

  
  

  Thank you

  Vikrantt Singh
  

• Error on the Page and an error has occurred in the script on this page

  Hello
  Work with HR HTML X 5
  Generate webHelp and pro
  
  When I go to 'VIEW', a topic that I get the below error
  
  An error has occurred in the script on this page
  Line 41
  1 tank
  Error 'keywordsHelp' is undefined
  Code 0
  URL: XXXXXXX
  
  Do you want to continue running scripts on this page?
  
  BUTTONS, YES and NO)
  
  IF I go 'NO' or 'YES' to the above, my help window opens upward, but on the status bar on the side right it will keep showing "error on page".
  
  Help, please
  
  Thanks to you all
  
  Kewal

  To the best of my knowledge, HR inserts not all onLoad events. It seems that the model you have onLoad event (I don't know how it got there), but there is no javascript file referenced so it errors.

  If you do not need this onLoad event, then pull it out, but how did get there? What is a hereditary project? Make sure that this is not something that should be there, and what's the problem, it's that there are no referenced javascript files. Talk to one of your developers, they will understand.

• Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

  Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

  When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

  An error has occurred with the extraction of data. Please, refresh the page and try again.

  I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

  Any help would be appreciated. Thank you!

  Ryan

  Firefox version 28.0 has corrected this problem. Thank you!

• I can't send an e-mail. I get a message that says "an error has occurred on the POP3 mail server. What can or should I do? Thank you very much

  As I said, I use Mozilla Thunderbird for my emails. I can't send an e-mail. All I get is a message saying: "an error has occurred on the POP3 mail server. What should I do to get this working and sending emails? Thank you, Gary

  Suggest you try the Thunderbird support forum at http://getsatisfaction.com/mozilla_messaging.

• How can I fix, "an error has occurred in the script on this page line: 2107"?

  How can I fix "an error has occurred in the script on this page line: 2107, Char: 1? I've recently upgraded to Explorer 9

  Hello

  I'll try to uninstall IE9 as shown in the link below.

  http://www.uniquetipsonline.com/how-to-uninstall-Internet-Explorer-9-from-Windows-Vista-and-Windows-7/

  When this is complete and you have restarted the PC, see if you can now print.  If everything works well, try reinstalling IE9 with your security software temporarily disabled during installation.

  Kind regards

  DP - K

• Error 2147220995 has occurred to the unknown

  Hello

  I try to use the toolkit to Vanessa echem, more precisely a updated the IV table VI, measuring more than current 5 cycles at a specific voltage. This process then repeated a number of iterations, each time to the intensification of tension in increments of 0.1 volts. After each iteration, the last of the 5 points is recorded in another graphic in the hope of generating a curve on a specific range of voltages. However, every time I run the program, one of the following error messages appears generally, always at the end of a loop when I close the mention the potentiostat at the end of an iteration of the loop, but not always at the end of the iteration as well.

  Error 2147220995 has occurred to the unknown

  536870863 error has occurred with the exception

  two of these errors are unknown so I don't know what to change. The confusing part is that the errors do not occur always and when they do it is not always at the same point in the program. For example, sometimes it will run thtouigh several iterations with no problem and other times, it will display an error in the first. I use version 8.5 and have attached the VI changed as well as the VI original table IV that was included in the software.

  Thanks in advance for any advice,

  Kai

  Have you tried to contact the developer for the Toolbox?  It looks like some kind of exception thrown within their Automation object.  This kind of thing happens generally in passing in the wrong type of parameter or by sending something out of range.

  Have you tried to probe the cluster of error to try to isolate which call is throw the exception?

• rror 8 has occurred to the file dialog-> Networked.vi URGENT

  I have some project for cRIO-9072 control.

  I used the network shares Variables to control cRIO PC remotely.

  After I used it whenever I have to start VI I could see that the message

  Error 8 has occurred to the dialog file-> Networked.vi

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.
  =========================
  NOR-488: Error detected DMA hardware.

  Method name: libraryeploy libraries

  Does anyone know how to overcome this error.

  The time is pretty critical to me. We will ship the material in the morning and I still couldn't create executable work to control cRIO PC remotely.

  I have included the screenshot and project as well so you could see what is happening.

  Hi all

  The solution in my opinion for this error message was:

  When you make an exe of a project using shared variables, you must have a local copy of the variables on the deployment computer which are then related to the 'real' shared variables stored on the target - cRIO, in this case.

  This means that in the view of your project:

  (1) Create static variable in the normal Manor on the cRIO.

  (2) create variables shared on the host PC - llb under the Pc host in the project and then select the aliasing and how to link to YOUR PSP.

  Kind regards

• Script error it appears on every page. An error has occurred in the script on this page don't you wanty to continue. How can I get rid of him.

  A small boc appears in the center of my screen.  Says: Script error on top.  Then, an error has occurred in the script on this page do you want to continue running the script on this page.  YES or NO how to stop this box to appear.

  Go to tools-Alt | Internet Options | Advanced (or control panel |) Internet Options | Advanced) in IE and the box disable script debugging and uncheck the box to show a notification of every script error.

  Steve

• Media Player an error has occurred in the script on this page.

  When I try to find album info I get the following:

  An error has occurred in the script on this page.

  Line: 1

  Tank: 243

  Error: Automation server can't create object

  Code: 0

  http://fai.music.metaservices.Microsoft.com/fai/scripts/default.js

  Do you want to continue running scripts on this page?

  Hello

  
  1 did you change on your computer before this problem?
  2. who is the operating system installed on the computer?
  Method 1:
  You can run the troubleshooter in the Windows Media Player library.

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:
  You can try to re - register wmp.dll file.
  a. click on start.
  (b) in the type box command prompt search.
  c. right-click and select run as administrator.
  d. type the following commands
  
  regsvr32 wmp.dll, and ENTER.

  regsvr32 jscript.dll and ENTER.

  regsvr32 vbscript.dll and ENTER.
  

  Method 3
  
  You will have to perhaps to regenerate the database of Windows Media Player and see if it works very well.
  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:
  a. exit Windows Media Player.
  b. Click Start, in the search for box %LOCALAPPDATA%\Microsoft\Media Playertype and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart the Player Windows Media .
  
  Note: Windows Media Player automatically rebuilds the database
   
  Method 4:
   
   
  Windows Media Player, all by going online to find the information of the Album follows the same set of rules that governs the internet Explorer. Therefore, you can follow the steps mentioned in the article below for a possible resolution to the question:

   

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

   

   

  I hope this helps.

• Error at startup, "an error has occurred in the program during installation... ox80070002.

  Original title: Constanr Error Message at startup.

  When I start my computer the message appears on the screen that says "an error has occurred in the program during installation... ox80070002" How can I fix?

  Open log on to Windows as administrator or an account with administrator rights.
  Click Start | All programs | Accessories | System Tools, and then click System Restore.

  Then, in the window system restore, click on the option "Restore my computer to an earlier time" (Note: this option)

  may already be selected), then click Next.
  In her select a Restore Point window, use the calendar to select a date before the day of the change or problem o

  Next.
  Note: A system restore message may appear that lists configuration changes that system restore will make. Click OK.
  In the page confirm the Restore Point selection, click Next.
  System Restore will now restore Windows XP configuration, and then restart the computer.

  Finally log on to the computer (using the same Admin account).
  The system restore restoration complete 'window' is displayed.
  Click OK.

  Your fact restore the PC to the point in time, you have selected.

  J W Stuart: http://www.pagestart.com

• an error has occurred in the script on this page. expected tank 21079 error code line 2 0

  Windows media player 11
  an error has occurred in the script on this page.
  line 2
  Char 21079
  expected error
  code 0

  Hello

  Thanks for the post. I understand that you meet the on Internet Explorer script error.

  I suggest you check out the link and follow the steps.

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope it will be useful.

• The exception exception software unknown 0xc06d007e has occurred in the application at the 0x7c812afb locaton

  Original title: error TampMon.exc

  I get the following:

  TampMon.exc

  The exception exception software unknown 0xc06d007e has occurred in the application at the 0x7c812afb locaton.  Can you get it someone please let me know what it is.

  Thank you

  Judy

  Hi Judy,.

  1. when exactly you get the error message?
  2. don't you make changes before the show?

  Looks like some programs non-Microsoft is causing this error. We recommend you to check which program is causing this issue and remove it.
  see How to configure Windows XP to start in a "clean boot" State .
  b. If you do not see the message error, then from the item, follow method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once again to correct errors.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.