writing in a picture... I'm stuck!

Similar Questions

• I would record the actual writing on a picture taken on a piece of paper. Please help me.

  I would like to record the actual writing on a picture taken on a piece of paper and remove the lines on the bottom. Is this possible?

  From the original image, I adjusted the levels (Image > adjustments > levels (Ctrl-L) for the following parameters:)

  

  Then using the marquee tool, I selected the areas not being used and filled with white:

  

  Until you get something like this:

  Then, I used the Brush tool to fill the other bits of the blank lines by using these settings:

  

  

  Once you are satisfied with the result with a white background go on your layer blending Options:

  

  put the mixture as below and press ok:

  

  This will make your layer to look like its got a transparent background, then create a new layer transparent and place below:

  

  When you have finished this handset 2 layer by selecting both and then right click and merge the layers:

  

  After that these steps recorded as a .psd file, then you can copy anything you need this file.

  I hope that all makes sense and you get the desired result. As I said tedious! :-)

  Final result:

  

• I run windows xp on HP Pavilion 750, in the past, I have not had a problem writing to the pictures from my computer to a disc

  I run windows xp on HP Pavilion 750, in the past, I have not had a problem writing to the photos from my computer on disc.

  It now written up so I get a message cannot keep any body can help please.

  original title: problem writing Photos...

  I'm sorry, but I don't have a solution for you.  You can check the Device Manager (start > run > devmgmt.msc > OK) to see if there are warnings next to your CD burner.  If there is a caution icon, double-click the entry and see what it says under "device status".

  I don't know how you use picture & Fax Viewer to burn a CD.  The usual method, except if you have 3rd party CD burning software, is to use Windows Explorer.  This is what Windows XP Help & Support has to say on this topic:

  To copy files and folders to a CD

  1. Insert a blank, writable CD into the CD burner.
  2. Open my computer.
  3. Click the files or folders to copy to the CD. To select multiple files, hold down the CTRL key while you click the files you want. Then, under file and folder tasks, click copy this file, copy this folder, or copy the selected items.

     If the files are located in my pictures, under management of images, click copy to CD or copy all items to a CDand go to step 5.

  4. In the dialog box copy items , click the CD player record, and then click copy.
  5. In my computer, double-click the CD burner. Windows displays a temporary area where the files are held before they are copied to the CD. Verify that the files and folders you want to copy to the CD appear under files ready to be written on the CD.
  6. Under CD writing tasks, click write these files to CD. Windows displays the Assistant burn a CD. Follow the instructions in the wizard.

  Notes

  • To open my computer, click Startand then click my computer.
  • Do not copy more files to the CD that it will hold. Standard CD hold up to 650 megabytes (MB). Large capacity CD contain up to 850 MB.
  • Don't forget that you have enough disk space on your hard disk to store the temporary files that are created during the CD writing process. For a standard CD, Windows reserves up to 700 MB of available disk space. For a high-capacity CD, Windows reserves up to 1 gigabyte (GB) of the available free space.
  • After you copy files or folders to the CD, it is useful to view the CD to verify that the files are copied.

• Login stuck to the launch of gray progress wheel

  Two days ago, I stopped my Macbook Pro mid-2012 after a few applications have frozen. I was not running at the time, only Itunes, Firefox and Adobe Illustrator. Things, I normally open and rarely have problems with. Unfortunately the spinning beachball appeared everywhere that I clicked and I had to force quit by holding the power button. Now I turn on my Macbook Pro and all is well until I start to connect to my account. I get my password, accepts it and then it just stays there with this gray progress wheel rotation.

  I left for a few hours, that and nothing happens. I can still pass the pointer with the trackpad without getting a beachball and the rest progress wheel turns so I think its frozen upward or anything like that. I think under its weight is trying to reopen these last applications I had upward and its all just not like it for some reason any. Strange because I've never had a problem with the reopening of the elements after the connection after a stop down front.

  Fortunately, I have another account of user still on there and it works absolutely perfect. This makes me doubt that there's any major problems with my Macbook for now. A few months ago, I installed a 1 TB SSD and its been running smooth with El Capitan.

  If worse comes to worse I have a time machine backup of whatever it is I can do a factory reset and just restore the backup. Would rather not do however if theres a simple solution. I tried to see if I can change the connection parameters and startup items to my account from other accounts system preferences, but it only allows to do this for the user you are logged in as. I tried to boot into Safe Mode and Recovery Mode and just get the same result. I erased the NVRAM. Logging in via the Panel of users to switch to the other account is not do the trick either. I feel like I am running out of options, so any help here would be great before I just reset the entire Macbook.

  Here's a picture of him stuck on the loading screen connection to give you an idea of the problem:

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• apple 4th gen tv does not work

  I plugged in the 4th gen apple tv and the first screen comes up with the Chinese writing and a picture of the remote control. the remote pictogram shows swiping down. e-e distance responds to nothing. It looks like this in a Chinese menu but cannot read Chinese, and nothing happens. help please

  Sounds like the menu remote synchronization and the battery being dead in the remote control.  Try reloading the remote: load your Siri remote or Apple TV Remote - Apple Support

  Note that you use the provided cable and a USB charger, or a USB port.

  Note also you can try and use the remote control that plugged while and do not need to wait three hours to fully charge.

• 15 g092na: "the selected disc is the gpt partition style" during installation

  I am writing my phone because I'm stuck in win7 install. I deleted the partition with the surprising victory 8.1 and when I thought I'll just it chop and install win7, it is said that he has other plans. What should I do to let me install win7?

  During the installation of new versions of windows it is important to understand that there are two main formats of hard drives and there are also two forms of priming.

  UEFI boot:

  Newer computers come with what we call a uefi boot interface. This allows additional features such as start secure as well as HP UEFI to support environment that allows you to test different hardware without having to start an operating system.

  UEFI operating systems use the disc Table of Partition GUID (GPT) format that allows multiple partitions, as well as larger capacity hard drive.

  BIOS boot:

  Older computers have the BIOS that contans the basic as well as setting the date of the on-board system and clock. Features such as virtualization or CPU overclocking (according to availability on selected hardware) are able to be enabled or disabled in the BIOS. Most of the features of the BIOS have now been reproduced in the latest UEFI boot.

  BIOS according to the operating systems use the Master Boot Record (MBR) disk format that allows the support of legacy operationg systems.

  What it means:

  To downgrade your device Windows 8.1 to windows 7, you can either

  1. Format the disk to MBR format.  (Be sure to back up your data before doing this)
  2. Start your installation of windows media 7 in UEFI mode (make sure that your UEFI boot mode is set to UEFI hybrid for maximum compatibility)

  DiskPart allows you to select the physical disk, rather than the partitions so when you convert between MBR and GPT (and), you lose the recovery partition. Condition have recovery HP/Windows Media you shouldn't encounter too much trouble for the recovery of your computer.
  
  Hope this helped and good luck with your re-setup

• Square button

  I want to write a code that consists of many text messages and two buttons command named 'Teaching to the next' and 'previous '. Text messages are already written and will hide when the program starts. When I press button statement following the second statement will appear and first a mask, when I press the button third time second will come and second will hide. When I press the button previous statement it will go backward. Kindly help me in writing this code. I'm stuck here.

  So, it seems you have to manage 3 situations and display messages 1-2-3 as the case may be, are you.

  You can put a digital hidden on the Panel and in digital play button callbacks, increment/decrement as needed and then display the appropriate message based on the value of the counter, hiding others.

• Verso, photo printing

  I use a computer laptop and trunning Windows 7 64 bit home edition. I recently purchsed a 5520 HP all-in-one inkjet multifunction printer which is great. However, I have noticed that recently, after downloading an image to print and frame in my living room that image printed backwards. In other words, it the people in the picture while watching us on the left side of the image. However, once printed the people appeared on the right side. So the writing on the picture has been reversed as well.

  Have you hade of suggestions how to solve this problem?

  Thank you,

  Gary Slippoy

  It is the only program I have. Hoever late last night, I had a follow-up on the site of Photoshop Elements give me the answer. So everything has been supported.

  Thank you

  Gary

• Backup (moving) pictures from iPhone to iCloud, stuck!

  Hi all

  I let go a long day holiday tomorrow and I have a lot of pictures on my iPhone taking over of valuable storage that I know I'll need inevitable for the pictures and videos on vacation. I went into my iCloud > Photos settings and position "Optimize iPhone storage" and it is just stuck on "download of 1 063 items. The number has moved, but since I started this about four hours ago he did only ~ 200 at most.

  I'm doing something wrong? I desperately need to move my 19 GB of Photos from my phone to my iCloud (I have 50 GB of space, 41GB that is available).

  If it is downloading, you do not have something wrong. It is an extremely slow process.

• HP Jet 7: My hp stream 7 tab stucks in the configuration of the window has... (a picture of blue background with whi

  My hp stream 7 tab stucks in the configuration of the window has... (a picture of a blue background with white letters) its does not accept the entry while I also use an aotg with the mouse cable. So please help me its very urgent

  Try to hold the low volume button when the power and press the F11 key to enter the menu of system recovery.

• I signed up for the photos of 10 a month, and I chose pictures of licenses.  However, when I download the pictures I have a license on my desk always have the "stock" of writing through them.  How can I remove this?  Thank you

  I signed up for the photos of 10 a month, and I chose pictures of licenses.  However, when I download the pictures I have a license on my desk always have the "stock" of writing through them.  How can I remove this?  Thank you

  Follow these steps to download: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Help!  I'm stuck.  No, not the child into the well.  I took a picture and put a second layer top with a rounded rectangle to make a frame.  My problem is that I need to find a way to hide the small box outside the box on the second layer.  Thanks to

  Help!  I'm stuck.  No, not the child into the well.  I took a picture and put a second layer top with a rounded rectangle to make a frame.  My problem is that I need to find a way to hide the small box outside the box on the second layer.  Thanks to all those who can help you.

  

  Another option is to put the Options bar of the Rectangle rounded to the path tool

  Trash bolt for the background layer, hold down the Cmd key and click on the symbol of the new layer to layer below the image to white. Then edit > fill with white.

  Return the image layer and draw the image as a path

  Click the load as a selection path in the Panel traced

  Edit > stroke and stroke with color

  Select > Inverse > delete

• My mouse is stuck on the main screen (add pictures)

  I'm used to 2 monitors, and I want to keep it this way. So I implemented a QUANIX monitor I have via HDMI to my Sprout.

  I have extension success of two monitors. but my mouse cursor is stuck in the main screen of Sprout.

  If I drag a window to the next screen, the window can move to the second monitor. but my mouse cursor is stuck on the first monitor.

  How can I solve it?

  Please help me... T_T

  (You can see in detail through below the images)

  monitor 1: HP all-in-one

  Monitor 2: horizontal HP

  Monitor 3: MON-SIS330 (QNIX QX2400)

  Current value of monitors

  

  captured when dragging a window to the next monitor

  

  I can find the solution to another post. Sprout Service stop and I can't success using extended display.

• Pictures and writing are not clean on my screen.

  BUBBLES FROM THE SCREEN

  
  
  BUBBLES OF PLEA SE HOW CAN YOU HELP ME TO FIX MY LABTOP SCREEN? THE PICTURES AND WRITINGS ARE NOT CLEAR.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• day 2 old Canon Rebel T5 90% of the time its stuck in mode development in AI .wont take picture

  even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.
  I tried the other setting, but it does the same thing,

  is this new camera broken? expected

  should I go back to Costco and get another. cannot take pictures at least externally

  Help my first DSLR and so far, I'm very discouraged

  prior was Panasonic LUMIX FZ70 no problem with it

  awilmot2003 wrote:

  even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.
  I tried the other setting, but it does the same thing,

  is this new camera broken? expected

  should I go back to Costco and get another. cannot take pictures at least externally

  Help my first DSLR and so far, I'm very discouraged

  prior was Panasonic LUMIX FZ70 no problem with it

  Busy is most often caused by a problem of SD card.

  AIservo is supposed to concentrate all the time.

  The mode that you use on the camera?

  What happens in green square mode?