Wrong number of ICCID reclaimed
Hello
I write a function that extracts the ICCID number for my different versions JDE sim card. Even though we know the SimCardInfo.getICCID () is only available for the JDE 7.1, returns the value of this API does not have the Options-> device-> value of the Sim Card.
Am I missing out on something? I have a few questions here:
1. This API would produce results on a Simulator? (I know that it used to, because it requires a SIM real, but always just confirm)?
2 would be the performance API results for GSM and CDMA phones?
3. what solution should I use for lower versions of JDE as JDE 7.1?
4 is the integer value (returned by the API SimCardInfo.getICCID ()) corresponds to that Options-> device-> value of the Sim Card? Or just a part must match? I read in a post that only the last 6 digits represent the ICCID number. Is this true?
I'm sorry for too many issues here, but it's getting all mixed up in my head and I need advice as soon as possible.
Waiting in anticipation!
Thank you
Solène
Thanks for the pointers tpcconline!
It seems that the ICCID returned by the API has the BCD nibbles in each byte, little-endian order. The value in the settings of the device is probably presented in big endian order.
I reversed the "endianness" with the excerpt below, and now the two values match each other!
public static void reverseNibbleEndianness(byte[] b) { for (int i = 0; i < b.length; ++i) { b[i] = (byte)((b[i] << 4) | ((b[i] >> 4) & 0x0f)); } }
Tags: BlackBerry Developers
Similar Questions
-
The # is not my # send my security code. You have the wrong number on file and I need to access my account. How do I allow you to select the correct number or can I change my profile somehow and change the phone number so that you can issue a new security code, or determine what is my existing code. I don't seem to have a number 7 digits on file anywhere.
Thank you
George Sedlack
Please contact support for Microsoft Outlook, Mozilla has no relationship with Microsoft Outlook.
-
Utility disk first aid indicates that it is a wrong number of hard file links
After various software update yesterday the Mac mini has had several problems. I ran disk utility first aid, and he says 'wrong number of hard file links.
Which allows to fix this?
The drive has been successful to repair by disk utility?
You must boot from recovery to repair the startup disk
OS X: on OS X Recovery - Apple Support
What problems did you have?
-
I can, t our user access in Control Panel; is a message "wrong number of arguments or invalid property assignment.
Hello
I suggest you follow the troubleshooting steps form the article and check if it helps.
Cannot open the item user accounts in Control Panel on a Windows XP-based computer
http://support.Microsoft.com/kb/919292
Hope this helps
-
BlackBerry 9000 "BOLD" My Smartphones continues to dial the wrong number
It's showing the wrong numbers when I'm looking for no - resource in contacts. It shows the wrong number, but under the name I'm looking for. 3 - 4 times I called the wrong person because my "BOLD" was and wrote a different name number, so that I'm looking. I don't know how to solve this problem.
When I type the name of the contact that I'm looking for my 9000 "BOLD" displays a list of contacts as usual, but does not have the phone number of the contact. I select another name on the list then scroll to the name that I wanted to get the phone displays the correct phone number. I have used this phone for some time and had always worked very well. This problem started yesterday. I will not sync the phone (have never, probably never will be). I have not modified or added to any software. The only thing I've done recently is added more contacts.
I also noticed that it is slower than usual when you search for names and it takes a long time so he can recognize that I typed more characters in the name of the contact before you can update the list of results.
Perform a restart of the device: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.
See if the problems continue. If they, I can't explain it, it looks like you may need to change your contacts and correct errors.
-
ApexExport 06550 PLS-00306: wrong number or types of arguments
My work of ApexExort was running great until about a month and I can't pinpoint the problem. If I run it in production, I get the following error. However if I run it on my localhost even exact script works very well.
Exception in thread "main" java.sql.SQLException: ORA-06550: line 2, column 12:
PLS-00306: wrong number or types of arguments in the call to 'EXPORT_APPLICATION_TO_CLOB '.
ORA-06550: line 2, column 5:
Set ORACLE_HOME=C:\Oracle\product\11.2.0\dbhome_1
set CLASSPATH = % CLASSPATH statement; \;%O RACLE_HOME%\jdbc\lib\ojdbc5.jar;%apexExportJavaDir%
set PATH = % PATH %; \;%O RACLE_HOME%\Bin
JAVAHOME value = C:\Program Files\Java\jdk1.8.0_45
Set startRunLocation = \\mgasan2\hdrive\ATS_Working\Scott_Working\PROD_SCRIPTS\APEX_APP_BKUP
CD C:\apex_4.2\utilities
All applications to export REM
Java oracle.apex.APEXExport - db %oracleHost%:%oraclePort%/%OracleServiceName%-utilisateur % oracleUser %-% oracleSystemPass %-forum password
< gphmh >
Thanks for your suggestion of Kiran, but I understood what my problem was. The APEX version in our database is older: 4.1.1.00.23 and I have been using a version 4.2 utilities apex when I should have used the C:\apex_4.1.1_en\apex\utilities
CD C:\apex_4.2\utilities
C:\apex_4.1.1_en\apex\utilities
For the record, here's what worked for me...
Set apexExportJavaDir=C:\apex_4.1.1_en\apex\utilities
Set apexHtmlFileName = apex_info.html
BackupLocation = c:\PROD_SCRIPTS\APEX_APP_BKUP\OUTPUT\TEST set
Set ORACLE_HOME=C:\Oracle\product\11.2.0\dbhome_1
set CLASSPATH = % CLASSPATH statement; \;%O RACLE_HOME%\jdbc\lib\ojdbc5.jar;%apexExportJavaDir%
set PATH = % PATH %; \; C:\Program Files (x 86) \Java\jre7\bin
Set startRunLocation = c:\PROD_SCRIPTS\APEX_APP_BKUP
FIXED % apexExportJavaDir %
Java oracle.apex.APEXExport - db %oracleHost%:1521/%OracleServiceName%-utilisateur % oracleUser %-% oracleSystemPass %-forum password
-
Wrong number of photos to import into Lightroom 6.6
HI :-)
I'm new to this, so please excuse me if I make mistakes ;-)
When I sync files in Lightroom 6.6, a wrong number of new pictures to import appears.
If I synchronize without adding new files, LR insists that 371 new files are found. However, the files are not displayed (because they aren't there, of course) but LR keep finding these "ghosts of the files.
How can I me LR to "forget" these files?
Any help is greatly appreciated!
6.6 Lightroom
Windows 10
Best regards
Thomas
Denmark
OK, as far as I know, it's what's supposed to happen when you synchronize files that have been imported from photos. County shows all photos in the folder and then, when you click on synchronize, Lightroom realizes that there is no new pictures to add, and so there is effectively nothing. If there were a few new files to add and some old files that does not need to be added, the number in the dialog box would be all the photos in the folder; and then that would be added the new files.
-
Can't get the procedure to update - PLS - 00306:Wrong number or types of arguments
I'm in a situation where I think that despite the correct number of parameters by the way my local procedure (which has been "forward declarations" in addition to logical writing for her; I use all this in a package) fails to compile in SQL * faster due to the error PLS - 00306:Wrong number or types of arguments in the call to P_SENDMAIL.
I'm passing 5 parameters in the area of forward declarations and also in the logic/header inside in addition to calling the procedure in the package. Can one of you help mewith this and tell me where exactly the error might be. Here is the code:
[code]
-Local variable
CRLF VARCHAR2 (2) CONSTANT: = CHR (13) | CHR (10);
-- --------------------------------------------------------------------------------
-FORWARD DECLARATIONS
-- -----------------------------------------------------------------------------
PROCEDURE p_sendmail (p_sender_email IN VARCHAR2,
P_FROM IN VARCHAR2,
p_to IN VARCHAR2,
msg_subject IN VARCHAR2 DEFAULT NULL,
p_msg_body IN LONG DEFAULT NULL);
[/ code]
The procedure itself:
[code]
PROCEDURE p_sendmail (p_sender_email IN VARCHAR2,
P_FROM IN VARCHAR2,
p_to IN VARCHAR2,
msg_subject IN VARCHAR2 DEFAULT NULL,
p_msg_body IN LONG DEFAULT NULL) is
LONG v_to_list;
LONG v_cc_list;
LONG v_bcc_list;
T_DATE VARCHAR2 (255) DEFAULT TO_CHAR(SYSDATE, 'DD MON YYYY HH24:MI:SS PM');
g_mail_conn UTL_SMTP. CONNECTION;
SMTP_HOST CONSTANT VARCHAR2 (256): ='smtp - abc.defg.ca';
SMTP_PORT CONSTANT PLS_INTEGER: = 25;
BEGIN
g_mail_conn: = UTL_SMTP. OPEN_CONNECTION (SMTP_HOST, SMTP_PORT);
UTL_SMTP. HELO (g_mail_conn, SMTP_HOST);
UTL_SMTP.mail (g_mail_conn, p_sender_email);
UTL_SMTP. RCPT (g_mail_conn, p_to);
UTL_SMTP.open_data (g_mail_conn);
UTL_SMTP.write_data (g_mail_conn, "|) CRLF);
UTL_SMTP.write_data (g_mail_conn, p_msg_body);
UTL_SMTP.close_data (g_mail_conn);
UTL_SMTP. Quit (g_mail_conn);
EXCEPTION
WHEN utl_smtp.transient_error THEN
Dbms_output.put_line ('TransientError: invalid operation in the service may not be available.) ") ;
WHEN utl_smtp.permanent_error THEN
Dbms_output.put_line (' permanent error: the entered email is invalid or recepients mailbox is full.) ») ;
WHILE others THEN
Dbms_output.put_line ('Unable to send an email' |') '|| SQLERRM);
END p_sendmail;
[/ code]
Now by calling the procedure to send an email:
[code]
p_sendmail (p_sender_email = > ' [email protected]'-, send an E-mail to the donor )
p_from = > ' ADS < [email protected] > ',
p_to = > v_store_email_address,
p_msg_subject = > 'anonymous user ',.
p_msg_body = > 'thank you ' |
CRLF.
"Email confirms that we have received your promise |
CRLF.
CRLF.
' Name: '. v_full_name |
CRLF.
' Temporary ID: ' | v_azbwccp_id |
CRLF.
"Reference number: ' |" MTID |
CRLF.
"Amount: ' | '. TO_NUMBER (campaign_desg_amt1) |
CRLF.
"Campaign: ' | '. campaign |
CRLF.
' Description: ' | '. adbdesg_rec.adbdesg_name |
CRLF.
' Type: ' | atvpldg_rec.atvpldg_desc |
CRLF.
' Duration: ' | '. atvpdur_rec.atvpdur_desc |
CRLF.
"Frequency: ' | '. atvfreq_rec.atvfreq_desc |
CRLF.
"Start date: ' | '. bill_date2 |
CRLF.
CRLF.
'Your commitment is processed.' |
CRLF.
"At the same time, if you want to change this transaction, please contact us.
CRLF.
CRLF.
"Thank you for your support." |
CRLF.
CRLF.
CRLF.
CRLF.
' * This is an automated message system. Please, do not respond to this email. *** ') ;
[/ code]
I've also attached a screenshot of the error message below:
Please help me if you can. I just can't understand the question.
Thanks in advance
Sandeep
In the header of the procedure, I spent my parameter as msg_subject and during the call, he was p_msg_subject. The minute that I corrected the error, I was able to correctly compile the whole package body.
The question can be now closed.
-
a wrong number or types of arguments in the call to and
Hello
Description: problem connecting to a database of the relationship of the processor of the NDA.
I want to enrich the incoming events with available data in the relational database. As stipulated in the Oracle® CEP Administrator's Guide, I created the
Data source JDBC in queue server configuration (config.xml). As he didn't throw me any error while staring at the server, I guess, the data source is fine.
I followed the steps below:
1 creation of the types of events in my context.xml in my application (fields in my paintings are shown as the property).
< wlevs:event - type the type name = "walletMonitoringEvent" >
< wlevs:properties >
<! - walletkey in db is of type varchar - >
< name wlevs:property = "walletkey" type = 'char []' length = "20" / >
< / wlevs:properties >
< / wlevs:event - type >
2 create a "table" in context.xml
< wlevs:table - event type = "walletMonitoringEvent" id = "walletMonitoring" data source = "walletDataSource" / >
3. added the table source in my processor.
< wlevs: channel id = "inputChannel" - type of event = "WalletEvent" >
< wlevs:listener ref = "walletProcessor" / >
< / wlevs: channel >
4. has tried to link the database to the CQL processor.
" < = xmlns:wlevs wlevs:config ' http://www.BEA.com/ns/wlevs/config/application "xmlns:jdbc =" " http://www.Oracle.com/ns/OCEP/config/JDBC "> "
< processor >
< name > walletProcessor < / name >
< rules >
< request id = "F1" >
<! [CDATA]
Select i.walletkey, i.createdDate in inputChannel as I, walletMonitoring w
where i.walletkey = w.walletkey
[]] >
< / query >
< / rules >
< / processor >
< / wlevs:config >
I get the error in the logs when I try to deploy the project below:
< 17 November 2014 13:46:16 THIS > < emergency > < CQLServer > < BEA-000000 > < CREATE QUERY AS F1
Select i.walletkey, i.createdDate in inputChannel as I, walletMonitoring w
where > > i.walletkey = w.walletkey < <
a wrong number or types of arguments in the call to and. Check the spelling of the registered service. Also confirm that his appeal is correct and its settings are correct data types. >
< 17 November 2014 13:46:16 THIS > < emergency > < CQLServerTrace > < BEA-000000 > < oracle.cep.exceptions.CEPException: number or types of arguments in the call to and wrong >
< 17 November 2014 13:46:16 THIS > < error > < CQLProcessor > < BEA-000000 > < unable to create the declaration [F1].
Invalid statement: "select i.walletkey, i.createdDate from inputChannel as I, walletMonitoring w.
"where > > i.walletkey = w.walletkey < < '.
Description: a wrong number or types of arguments in the call to and
Cause: This error occurs when the named function call cannot be matched to any declaration for this function name. The function name can be spelled, a parameter can have the wrong data type, or the function declaration may be faulty
Action: Check the spelling of the registered service. Also confirm that his appeal is correct and its settings are correct data types. >
< 17 November 2014 13:46:16 THIS > < error > < deployment > < BEA-2045013 > < the context of the "updateWallet" application could not be started. The cause is:
Invalid statement: "select i.walletkey, i.createdDate from inputChannel as I, walletMonitoring w.
"where > > i.walletkey = w.walletkey < < '.
Description: a wrong number or types of arguments in the call to and
Cause: This error occurs when the named function call cannot be matched to any declaration for this function name. The function name can be spelled, a parameter can have the wrong data type, or the function declaration may be faulty
Action: Check the spelling of the registered service. Also confirm that his appeal is correct and its settings are correct data types. >
Hi Siva,
It seems the event type walletkey property is set incorrectly. Please try to set the event as follows:
Use "char" instead of "char []."
Best regards
Sandeep
-
PLS-00306: wrong number or types of arguments in the call to 'XXC_AMOUNT' ORA-06550
Hi all
CREATE OR replace PROCEDURE Xxc_amount (v_item_id IN NUMBER,
v_amount OUT NUMBER,
v_size OUT NUMBER)
IS
v_size NUMBER := NULL;
v_amount NOMBRE;
START
BEGIN
CHOOSE conversion_rate
INTO v_size
FROM mtl_uom_class_conversions
WHERE inventory_item_id = v_item_id -- 2289;
v_amount := Nvl (Trunc (v_size), 0);
-RETURN (cp_cartons);
EXCEPTION
WHEN OTHERS THEN
v_size := 0;
dbms_output . Put_line ()' Error getting Item Id:'| V_ITEM_ID );
END ;
dbms_output. Put_line ('Qty-->' || v_amount );
dbms_output. Put_line ('Qty1-->'|| v_size );
END ;
DECLARE
amount NUMBER;
v_size NUMBER;
START
Xxc_amount (2289, amount, v_size);
dbms_output. Put_line (amount || '--' || v_size );
END ;
ORA-06550: line 5, column 5:
PLS-00306: wrong number or types of arguments in the call to 'XXC_AMOUNT '.
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
Thank you
Post edited by: 994122 changed the name of the procedure to Xxc_amount Xxc_amount1
Simply remove the declarations of the v_size and v_amount and it should work.
The following text compiles and works for me when I call:
CREATE OR replace PROCEDURE Xxc_amount (v_item_id IN NUMBER, v_amount OUT NUMBER, v_size OUT NUMBER) IS BEGIN BEGIN SELECT conversion_rate INTO v_size FROM mtl_uom_class_conversions WHERE inventory_item_id = v_item_id; -- 2289; v_amount := Nvl (Trunc (v_size), 0); --RETURN (cp_cartons); EXCEPTION WHEN OTHERS THEN v_size := 0; dbms_output.Put_line ('Error in Getting for Item Id :'|| v_item_id); END; dbms_output.Put_line ('Qty-->' || v_amount); dbms_output.Put_line ('Qty1-->'|| v_size); END; DECLARE amount NUMBER; v_size NUMBER; BEGIN Xxc_amount (2289, amount, v_size); dbms_output.Put_line (amount || '--' || v_size); END;
-
Server error: Wrong Number: PMT_000008
Cannot change the method of paymaent
AFTE click here is the error:
Server errorError:
For the moment, we are unable to perform the specified action. Please accept our apologies for any inconvenience. We got a notice and try to rectify the situation as soon as possible. Click on the "back" button (back) on your browser and try again later, or perform other actions.
Wrong Number: PMT_000008
Help, please.
Hello
You will need to contact support by calling/chat for this request.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
Please see Support FAQ: how to contact Adobe for support?
Hope that helps!
Kind regards
Sheena
-
Nested Tables: PLS-00306: wrong number or types of arguments
Hello
I created a package for updating of wages for a list of the empnos passed as parameter inside below is the package code:
CREATE or REPLACE PACKAGE method
AS
type emp_list IS TABLE OF emp.empno%type;
PROCEDURE add_sal (empnos emp_list);
END method;
/
CREATE or REPLACE PACKAGE body method
AS
PROCEDURE add_sal (empnos emp_list)
AS
BEGIN
ForAll I IN 1... empnos. Count
UPDATE emp SET sal = sal plus 100 WHERE empno is empnos (i);
END add_sal;
END method;
/
When I try to call the procedure to aid under block it works fine:
DECLARE
empnos emp_info.emp_list: = emp_info.emp_list (1111,1112);
BEGIN
emp_info.add_sal (empnos);
END;
/
But when I try to create the same as type I created in the package and try to pass to the procedure, the block fails with the error:
DECLARE
type emp_list IS TABLE OF emp.empno%type;
empnos emp_list;
BEGIN
empnos: = emp_list (1111,1112);
emp_info.add_sal (empnos);
END;
/
Error report-
ORA-06550: line 8, column 3:
PLS-00306: wrong number or types of arguments in the call to 'ADD_SAL '.
Can someone please help me understand why we see this error?
With the help of: Windows 8.1
Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production
PL/SQL Release 12.1.0.1.0 - Production
"CORE 12.1.0.1.0 Production."
AMT for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
But when I try to create the same as type I created in the package and try to pass to the procedure, the block fails with the error:
No - it is NOT of the same type. One is the type of package and this news isn't the type of packet.
The fact that they have the same projection or a set of attributes is obsolete.
See the Oracle documentation
http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/Collections.htm#BEIEADAA
You can assign values to all fields at the same time that if you assign a record to another record with the same data type. With fields that match exactly isn't enough, as shown in example 5-48.
Example 5-48 assigning all the fields of a record in a statement
DECLARE
-Two declarations of the same types.
TYPE DeptRec1 IS MADE
(dept_num NUMBER (2), dept_name VARCHAR2 (14));
TYPE DeptRec2 IS MADE
(dept_num NUMBER (2), dept_name VARCHAR2 (14));
dept1_info DeptRec1;
dept2_info DeptRec2;
dept3_info DeptRec2;
BEGIN
-Is not allowed; different types of data,
-even if the fields are the same.
-dept1_info: = dept2_info;
-This assignment is OK because the files have the same type.
dept2_info: = dept3_info;
END;
/ -
ORA-06550, PLS-00306: wrong number or types of arguments in the call to ' |'
Hi all
Please help me about this error, if I comment the threshold (in the color of the thickness)
ERROR on line 19:
ORA-06550: line 19, column 25:
PLS-00306: wrong number or types of arguments in the call to ' |'
ORA-06550: line 19, column 3:
PL/SQL: Statement ignored
DECLARE
TYPE nametable IS TABLE OF CHAR(10) INDEX BY BINARY_INTEGER;
vname NAMETABLE
CURSOR cf
IS
SELECT ename
FROM emp;
i NUMBER;
START
OPEN cf;
i := 1;
LOOP
FETCH cf INTO Vname (i);
EXIT WHEN cf%NOTFOUND;
i := i + 1;
END LOOP;
CLOSE cf;
dbms_output. Put_line ('Name is ' || VNAME );
FOR n IN 1.. VNAME . County LOOP
dbms_output. Put_line ('Name is ' || VNAME (n));
END LOOP;
END ;
Thank you
VNAME is an associative array. You can not use in DBMS_OUTPUT. Put_line as such. You need to loop through what you did in the code after the DBMS_OUTPUT and print each element of the array individually.
-
Hi Please help me solve the error given by this procedure
TEXT
--------------------------------------------------------------------------------
PROCEDURE UPDATE_ORDER_NUMBER_SEQUENCE)
sequenceName IN VARCHAR2,
Inc. in full)
AS
stmt VARCHAR2 (2000);
number of l_n;
Start
BEGIN
-change the increment to Inc.
stmt: = 'ALTER SEQUENCE | sequenceName | ' INCREMENT ' |
Inc.;
TEXT
--------------------------------------------------------------------------------
dbms_output.put_line (' execution "' | stmt |) '''');
EXECUTE IMMEDIATE stmt;
-Read the following value
stmt: = "SELECT" | sequenceName | '. DOUBLE NEXTVAL ';
dbms_output.put_line (' execution "' | stmt |) '''');
EXECUTE IMMEDIATE stmt in l_n;
-change the increment of 1
stmt: = 'ALTER SEQUENCE | sequenceName | ' INCREMENT OF 1';
dbms_output.put_line (' execution "' | stmt |) '''');
EXECUTE IMMEDIATE stmt;
EXCEPTION
TEXT
--------------------------------------------------------------------------------
While some OTHER THEN dbms_output.put_line (SQLERRM);
END;
end UPDATE_ORDER_NUMBER_SEQUENCE;
following error please help me solve this error
ERROR on line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in the call to
'UPDATE_ORDER_NUMBER_SEQUENCE '.
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Well, the error message is pretty self-explanatory, isn't it? What you use
to call this procedure actually raises this error.
However, you have not posted the SQL that actually calls this procedure
so please post that.
That said, the whole procedure seems wrong - what business requirement is there for
edit sequences? This isn't normally how they should be used.
-
PLS-00306: wrong number or types of arguments in the call to PUT_LINE
Hi all
I m new to the pl sql, when I run the below block I get errors.
kindly help me on this.
DECLARE
Siva ARRAY TYPE IS VARCHAR2 (100);
s siva;
Cur_i IS SELECT name FROM employee of CURSOR;
BEGIN
OPEN cur_i.
LOOP
SEEK cur_i s INTO;
EXIT WHEN cur_i % NOTFOUND;
DBMS_OUTPUT. Put_line (s);
END LOOP;
CLOSE Cur_i;
END;
I m getting the error below:
PLS-00597: expression' in the INTO list has the wrong type
PLS-00306: wrong number or types of arguments in the call to "PUT_LINE '.
Hello
I think that you are learning/exercises PL/SQL. See below the approach.
declare
siva type is table of the varchar2 (100);
s siva;
cursor cur_i is
Select first_name from employees;Start
Open cur_i;
loop
collect fetch cur_i in bulk
s;
When the output cur_i % notfound;
end loop;close cur_i;
-Printing values in the collection
because me s.first... loop of s.Last
dbms_output.put_line (s (i));
end loop;end;
Thank you
Suri
Post edited by: Suri
Simple loop removed and exit when collecting conditions because we fetch all the records of a sudden in the collection using the bulk.
Maybe you are looking for
-
My 2012 Macbook Pro 13 inch lost its charge a week ago. The charger lights a green light. When I press the button on the side of the Mac to see the power, only the first green light blinks then turns off. The Mac does not load. It took to pcworld an
-
Unlock the Mac with Apple iWatch
I have a MacBook to 2015 and iWatch. The Mac is on MacOS Sierra and the iWatch is on version 3, so both devices are on the latest version of the software. I also have an iPhone on the latest IOS that the watch is twinned with 6. All devices are on th
-
Revive a show after a 1 year absence
Hello. I have a friend who had a podcast, but he has not been on iTunes for a year or more. She would like to resurrect and revive the show. She would be able to revive the show as if it were brand new on iTunes because it has been so long or have to
-
County and filter the number of occurrences of the string in an array
Hello... I need to filter and count display for number of channels occur in a single column of an array of strings... I can't explain... below I represented all that is my need. Column A is the array of input strings... Column B and C are the bays o
-
Color LaserJet Pro MFPM476 dw: hp color laserjet mfp MFP M476 dw pro
I get a Message open the front door. The toner cartridges are brand new HP toner cartridges. I have it turned on and on and unplugged plugged. The message does not go far.