WRT 54 G configuration based on the web page problem
Hello.
When I enter the Setup page for my WRT 54 G web-based, it looks like this.
I want to update my firmware, but it's a little difficult with the configuration page that looks like this.
Any ideas anyone?
Try to delete the browser cookies, files and see if it works.
You want to update the firmware of the router.
Download the latest firmware from the site Web of Linksys and save it to your computer.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Cycle of the router and see if you can open the page complete the installation of the router.
If you are still not able to open the page in correct configuration of the router then you can try to upgrade the firmware using the tftp.exe file.
Go to the Web from Linksys website. Select the model of router BEFW11S4 and version 3.2. You will find the file of the installation wizard to download. Download the Wizard installation file and save it to your computer.
Now you have 2 files on your computer. one is the last file of the firmware on your router and the other is the Setup Wizard.
Run the file from the Setup Computer Wizard. In the server box, type the IP address of your router 192.168.1.1. Type the password of your router. You will find the Browse button. Click the Browse button and locate the firmware file and click upgrade.
It will start to upgrade the firmware of your router.
After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.
Tags: Linksys Routers
Similar Questions
-
WRT350N configuration based on the web does not load on the cable port.
I've had this router for over 6 months, and only in the last two weeks, I could not access the configuration page based on the web through my PC, connected to one of the 4 wired ports. None of the laptops I tried (Win XP, Vista) are connected via Wi - Fi without a problem. Obviously, this isn't an emergency, because I can access it through the laptop, but I use mostly my PC to manage the router.
Any ideas on other things to check?
Thanks for the tip, but that did not work... However, trying to fix another problem, with the USB port of a storage drive, I re-load the updated firmware and am now able to access the configuration page. Still no action on the USB key if!
Thanks again!
-
Computer hangs when the video display based on the web
I use Windows Vista. When I view the videos on the web, I sometimes my computer crash. It happens intermittently, perhaps one out of every 10 times I discovered a video and occurs with IE8 and Firefox. I reinstalled the Flash player as it seemed at the time when it crashes flash videos of base. Just before the crash to computer, I get a bunch of lines on the screen. Video files and DVD that is not based on the web seems to play fine
Hello1. do you remember any change before the question?2. What if the problem occurs on a particular Web site?Follow the steps below and see if they help.Step 1:I suggest you to disable the auto restart in case of system error and try to take note of the error message and reply with the exact error message. Once we have the exact error message that we will be in a better position to determine the exact nature of the problem and fix it.Follow the steps below to disable automatic restart on system failure:a. Click Start.b. type system in the search box after clicking on start. Choose system from the list of results.Note: If you see the classic view of the Control Panel, you will not see this link. Just double-click on the system icon and go to step d.c. click on the system link.d. in the left pane, click Advanced system settings.e. Locate the startup and recovery area and click on the settings button.f. in the startup and recovery window, locate and uncheck the box next to automatically restart.g. click OK in the startup and recovery window.h. click OK in the System Properties window.You can now close the system window.Subsequently, when the computer is lorsque l' ordinateur s' arrete stop the computer restarts automatically and you will receive the error message, make a note of it and post back.You can also open the event viewer and check if there are other significant error messages/codes. See the link below for more details:What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-ViewerStep 2:If you don't have to update your display drivers yet, I suggest you Update your display drivers and check if the crash stops.Step 3:I suggest you put your computer in a clean boot State, and check if the problem persists. I suspect that there could be involvement of third-party software.Note: Follow step 7 to your computer as usual.
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Hello
I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:
"This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »
I tried to look for a solution, but I did not understand what Live Meeting I need to download.
Can you help me?
Thank you.
Original title: Live Meeting 2007
Hi Alex,
Thanks for posting your query in Microsoft Community.
I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.
FAQ: Live Meeting related topics media
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Link URL in BB7, BB10 devices control? (for applications based on the web)
Context:
-App companies (customers are members of staff)
-App is based on the web - no hybrid or native application but a URL
-URL is located within the company's intranet
Question:
Is it possible to order this URL on BB7 10 devices? For example:
1. drag the URL as a logo on the screen of the device (like apps look)
2 remove the URL (and related logo) from the screen of a user if needed (for example user is no longer can access web app)
Thanks in advance!
Leyden
I think the feature you're looking for on BBOS's channel Push browser info to article 5 in this doc:
This functionality does not exist for BlackBerry 10, so you will need to develop a shortcut app, info here (talking PlayBook but work for BlackBerry 10 devices):
-
Software based on the Web so that customers can change the templates directly to print?
Hi all
I'm trying to find a piece of software based on the web I saw in action but do not know what's it called, or even what to look for to find!
I saw him at a print shop, and essentially, it was a system where society print put up a model/s for their clients (ie the brochures) and each time the customer needs a new brochure that they can open an online session, input text and images (limited by the rules of the model), they get a screen on evidence then confirmed when he's going all right to print.
Anyone any idea what this software can be?
Maybe it's a custom interface that you wouldn't be able to buy. As much as I know Adobe has no what anyone who allows for processing and interaction online focus on electronic commerce.
-
App problem based on the Web on the process
Hi all
AIX 6.1
11.2.0.3
We have a new application based on the web, put in work, by changing the old system.
We have only 100 users who can simultaneously connected, and our process of db is set to 120.
But we met often too can mistake Treaty which we met in the previous system.
It seems that the process are left behind when the disconnection of users or disconnected from the new web-based application.,.
Is it possible that I can to check which processes are orphaned? And how do I auto cleaning/kill them?
Oracle 11g has proc stored to manage this questions?
Thank you very much
zxy
You say you have a web-based application. Which implies that it is a three-tier application? If, therefore, normally, middle-tier servers maintain pools of connections. If this is the case, you wouldn't think that a session is created each time a user connected to the application, or that a session ended whenever a user logged out of the application. At best, the connections of killing the middle tier has opened in the connection pool would cause problems of application performance. At worst, you cause the application being unusable. You could certainly do things like create profiles that limit a user can have how many sessions, how long those sessions can be slowed down, etc. But in doing so for a three-tier application would generally strongly discouraged.
With regard to the question of if you can change PROCESSES affecting dynamically...
Oracle documentation is available at
Once you're there, choose the documentation for your version of Oracle
Online Oracle Database Documentation 11g Release 2 (11.2)
Go to the reference
http://docs.Oracle.com/CD/E11882_01/server.112/e25513/TOC.htm
Now, either search METHODS or access the initialization parameters section to find the parameter page
http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams200.htm#i1132608
As with all other initialization settings, should be recorded the editable attribute.
Justin
-
Create Unique Session Variable based on the login page
Hello:
I'm building a dynamic website with Dreamweaver CS5 with Coldfusion 9.
My question is how can I set a session variable to read a certain value. It is currently when my clients go to the login page they enter their username and password. I was able to create a session variable that contains the user name as value. So in all their pages read Welcome website "all that was their connection username. Now, I want to get the session variable to read the same table but the different FullName field. This way, that the web pages will say Welcome "FullName (based on their login user name)" I tell myself that I have to configure a query parameter, but after trying and failing for four hours to produce a successful result, I resorted to post my problem here. I appreciate the help and advice.
My information:
DataSource = Table 'Access' = 'Logininfo' (current) land (for the session variable) = 'User_name' (desired) field (for the session variable) = "full name".
Currently using (server behaviors: Variable de Session) MM_Username on each relevant page for the user.
My sign in page code is as follows:
Head:
< IsDefined ("FORM.username") cfif >
< cfset MM_redirectLoginSuccess = "members_page.cfm" >
< cfset MM_redirectLoginFailed = "sorry.cfm" >
< "MM_rsUser" datasource = cfquery name = "Access" >
"SELECT AccessLevels FROM Logininfo WHERE username, password, username, FullName is < cfqueryparam value =" "#FORM.username #" cfsqltype = "cf_sql_clob" maxlength = "50" > AND password = < cfqueryparam value = "#FORM.password #" cfsqltype = "cf_sql_clob" maxlength = "50" >
< / cfquery >
< cfif MM_rsUser.RecordCount NEQ 0 >
< cftry >
< cflock scope = "Session" timeout = "30" type = "Exclusive" >
< cfset Session.MM_Username = FORM.username >
< cfset Session.MM_UserAuthorization = MM_rsUser.AccessLevels [1] >
< / cflock >
< cfif IsDefined ("URL.accessdenied") AND false >
< cfset MM_redirectLoginSuccess = URL.accessdenied >
< / cfif >
< cflocation url = "' #MM_redirectLoginSuccess # ' addtoken ="no">"
< cfcatch type = 'Lock' >
<! - the timeout of cflock management code - >
< / cfcatch >
< / cftry >
< / cfif >
< cflocation url = "' #MM_redirectLoginFailed # ' addtoken ="no">"
< cfelse >
< cfset MM_LoginAction = CGI. SCRIPT_NAME >
< cfif CGI. QUERY_STRING NEQ "" > "".
< cfset MM_LoginAction = MM_LoginAction & "?" & XMLFormat (CGI. QUERY_STRING) >
< / cfif >
< / cfif >
Body:
Connection < h1 > < / h1 >
< p > please enter your login information the registration form in order to access your member account page. < /p >
< form ACTION = "" < cfoutput > #MM_loginAction # < / cfoutput > "method ="POST"id ="login"> < table width ="auto"border ="0"align ="center">"
< b >
< td > < label for = "username3" >
< div align = "right" > user name: < / div >
< / label > < table >
< td > < span id = "sprytextfield1" >
< input type = "text" name = "user name" id = "NomUtilisateur2" accesskey = "n" tabindex = "10" >
< span class = "textfieldRequiredMsg" > a value is required. </span > < / span > < table >
< /tr >
< b >
< td > < label for = "password" >
< div align = "right" > password: < / div >
< / label > < table >
< td > < span id = "sprypassword1" >
< input type = "password" name = "password" id = "password" accesskey = "n" tabindex = "15" >
< span class = "passwordRequiredMsg" > a value is required. </span > < / span > < table >
< /tr >
< b >
< td colspan = "2" > < div align = "center" >
< input type = "submit" name = "submit" id = "submit" value = "Login" accesskey = "n" tabindex = "20" >
< / div > < table >
< /tr >
< /table >
< / make >
< script type = "text/javascript" >
var sprytextfield1 = new Spry.Widget.ValidationTextField ("sprytextfield1");
var sprypassword1 = new Spry.Widget.ValidationPassword ("sprypassword1");
< /script >
I'm sure it is something simple and will show my status as a rookie for the asking, but thanks for your help!
A session variable is also the best route to go? I'll use this to query databases to display and allow them to change contact information, also show their invoices and request services.
I don't know CF so forgive me, but you can create a session for fullname variable or use a query on your pages to filter the data WHERE username = user session variable. Looking at your code, it looks like you can add a session to the full name variable here:
-
This popup occurs whenever I select an account in the Web page to view its details. Once I click OK it disappears, but appears again when when I select another account for display. It is not a barrier to the operation but rather boring.
I guess that site does not support the basis of Webkit and Gecko according to browsers.
WebKit - Chrome, Safari, etc of Midori.
Gecko - Pale Moon, Firefox etc.Have you tried on IE (Trident based).
-
How can I get Firefox back to the same position on the web page
How can I configure Firefox to return to the same position on the web page
Wait until Firefox finishes loading web page. Then it will be automatically the position value when you were leaving the web page
-
How to configure Firefox to autmotically Web page refreshes?
How can I configure Firefox to autmotically Web page refreshes?
This has happened
Each time Firefox opened
Is a day using Firefox
Use this add-on, ReloadEvery: https://addons.mozilla.org/en-US/firefox/addon/115/
Its functionality is accessible from the page's context menu (right-click anywhere on a page).
If this isn't what you mean, please provide details.
-
Cannot display the web page.
I have a Dell latitude D600 with built-in wifi. I am not able to connect to the internet with it more. It shows that it is connected to the 100% signal. I bought an external ralink wifi adapter and it worked for a while, as well as internal. It shows that I am connected as well, but cannot set up all web pages. They all say the same "cannot connect to the web page. What could go wrong. I tried restoring the system without result. The ralink has worked well for a few weeks. I took it to where I bought it and they said it was very good. Can anyone help?
Hello
When it says connected but does not really provide Internet connection, this means that the wireless card works and can see the signal but cannot connect wireless router and get an IP address.
If you can use a cable to connect the newspaper of router (read the manual of the router) to the menu of the router and check the wireless setting.
Disable wireless security and see if you can connect without security.
Once you activate the security.
In general.
My wireless is not working - http://www.ezlan.net/wireless.html
Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Jack, MVP-Networking. EZLAN.NET
-
My laptop has been connect wireless to my own private network and public networks such as McDonald's, Panerra, etc... Now, I get a message that says internet explore cannot display the Web page, but my computer says it is connected to the internet and my wireless connection is excellent. I also tried to connect with Mozilla firefox with the same results. The error from the Explorer head here to get answers, please help.
Hello
This line, Autoconfiguration IP address...: 169.254.82.78
This means that the card can not be set with a valid IP address, and Windows assign a null default IP.
Maybe this can help.
My wireless is not working - http://www.ezlan.net/wireless.html
Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I have a laptop when I use the wireless at home I have no problem, but when I use the internet at work I can not connect it says Internet Explore cannot display the Web page so I have no internet access
Can you help me
Try to run diagnose connection problem, if it is in the work, you will probably need to configure some additional things such as VPN or Proxy, try to contact your IT Department and ask them.
-
Every time I navigate to a new site, I get the following security WARNING "only want you to view the contents of the Web page which was delivered safely. This Web page contains content that are not delivered using a secure HTTPS connection, but likely to compromise the security of the whole Web page. "How can I configure my system so that it does not constantly jump upwards? It's boring as can be! Any help is greatly appreciated! I use Windows XP.
Go in Panel > Internet Options > Security tab and click on custom level, scroll down to the Miscellaneous section and mixed content display change Prompt to Activate, click OK and click OK , restart your browser.
I hope this helps.
Maybe you are looking for
-
10 Firefox back to the default theme on the computer restarts
Tried to do a little research by keywords. Problems finding anything relevant. I just upgraded to firefox 10 and now (never had this problem before) I have to manually change the default theme every time I restart the computer. It's a theme I downloa
-
Photo Story 3 on Windows XP - jump. ____
I have photo story 3 on Windows XP. When you add music to my story, because I'm jumping and hesitation on the preview of my story. Is it because my story is too big? How can I tell the size of my story? The story is actually about 210 photos and play
-
Error 0 x 8007005 seeking updates Windows
Original title: Windows Update errors & problems I'm checking the updates of windows and I get error 0 x 8007005. What should I do to fix this error, so I can check updates?
-
Convert an excel in javscript for livecycle formula
I was wondering if someone can help out me in making it functional in Livecycle. Thank youIf (DecimalField2 < 1, DecimalField4, DecimalField8)
-
Necessary support to find the card driver network for my laptop HP Pavilion G series.
Product name: HP Pavilion G Series notebook PC Product number: LW363UA #ABA Windows 7 Home Premium Error message: missing network adapter driver My hard drive crashed and I had to reinstall Windows. Now, I can not for the lack of a network card dri