WRT160N works is not in a situation of LAN - LAN

WRT160Nv3 FW v3.0.03

I made this a million times over 1 million different routers and never once have trouble like that. Cannot know what is the problem for the life of me. I simply add a WRT160N at our company as an access point network, not a router. I have a dozen WRT54G around facility HERE exactly in the same way and they all work very well. I have connected a normal LAN cable from the wall to the WRT160N #1 LAN port. I am sure that this cable in the wall works very well, I tested it with a laptop and the laptop gets an address IP DHCP issued since our DHCP in Windows Server 2003 very well. The laptop can browse the internet and local network without problems. On the basic configuration of the WRT160N page I put the automatic/DHCP Internet connection, set the IP address of network for 192.168.1.222 configuration to match our LAN, which is 192.168.1.0/24. I put the subnet mask of 255.255.255.0. I disabled the DHCP server. Under routing Advance I have disabled NAT, RIP off and none of the static routes. In the wireless settings I created an SSID, Wireless N only Mode value (I want this broadcasting only N, not G/B), width of the channel the value Auto and auto channel. The SSID broadcast is turned on. Is wireless security mode WEP with 128-bit encryption and key 1 contains our company WEP key. All the other settings on all tabs remain their default, the out-of-the-box settings.

Very well, the router broadcasts the SSID. It goes not to the long DHCP clients, and perhaps has not managed their requests to our DHCP server, I'm not sure. In any case, normally with this configuration you just connect a LAN cable to the wireless router's LAN port and're you good to go. Not the case here, for some reason any. Nobody can join this network because the router is not passing along data DHCP. Administration-> Diagnostics, I can ping other devices on our network local but cannot get anywhere outside our local network. The status page shows all zeros for gateway/subnet/IP in the Internet access section.

What I'm doing wrong here? Or is it just broken router? We have tried resetting to factory default, we tried to upgrade the firmware, everything that we can think of and nothing works.

TIA

You tried all possible measures to connect the Linksys router.

If it still doesn't work then I think you need a new router.

Tags: Linksys Routers

Similar Questions

  • WRT160N works, but not with the internet

    Heya!

    We have the WRT160N for a little while now and until a few days ago, it worked very well!

    A few days ago, the internet on our homenetwork started have really very slow and even 1 pc cannot connect at all.

    So we decided to give the router a hard reset.

    After that we did it, the network is back (our wireless network is not protected, but we'll fix that soon after we had it working again).

    Only, we do not have operating... We returned our network so we can use the maps shared on all computers, but internet has disappeared!

    We got 1 pc near the Modem, so we connected the pc to the modem and it got internet right away!

    Then we plugged the modem to the router again once and then beautiful blue light on the logo 'internet' on the router and everything was going on well again.

    Unfortunately, it was not. The internet still wasn't back! local network available on all PCs!

    So in short:

    After resetting the WRT160N, we could only use the LAN, so is not the internet. While the router itself says it has internet (it is connected to the moedem correctly).

    Things you should know:

    -We do not have internet on our modem, PCs that are connected directly to the modem have no internet

    -the cable between the modem and the router is not broken, we have tried other cables but same problem

    -We also made the modem, then turned the router, that rekindled the modem and then the router back, still nothing happened

    -Now we plugged our selector of ould (Wireless-G) back on, and it immediately starts to work OK!

    So please...! What is the problem with the WRT160N? We have forgotten something after the reset? We need to define a configuration somewhere? Maybe its broken?

    TNX for the answers already!

    Your router lost its configuration after you have reset it... You need to reconfigure your router now...

    If your Internet Service is cable follow this
    If your Internet Service is DSL follow this

    SE if you can connect to the internet now...

  • Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

    BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
    At the moment I have problems connection BlackBerry device and other devices via Btooth
    messages 1: 'softwarfe device driver was not successfully installed ".
    message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
    In short, the list obtained messages:
    1 device driver software was not compatible
    2. incompatible software Bluetooth
    3. the drivers are not installed: lists of codes (31) (28) (10)

    Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
    I tried all the options you will find in google without success.

    I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

    Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My works wireless, but my connection to the LAN does not work?

    I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

    Hello

    Sorry I'm not quite clear about the situation.

    You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

    If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

    In general.

    Check the Device Manager for the entry of valid card of the wire.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    ----------------------------------

    Try installing the latest drivers from the card manufacturer support page.

    Download the drivers and extract them to a folder of your choice.

    In Device Manager, right-click on the adapter.

    Click Update drivers and choose her browse my computer for drivers.

    Choose let me a list of choices, click on disk and point to the folder with the drivers.
    -------------------------------------

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    On the State of intellectual property.

    TCP/IP and its variables usually look like this.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    Typical TCP/IP status looks like this.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    Physical address
    is the MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1.
    IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ------------------------

    Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted

    Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • Drag the mouse, hand tool works do not at all!

    Then I installed Photoshop CC 2014 and 2014 CC Illustrator on my computer, started a new file, but only found that any action that includes the mouse dragging - creating shapes, hand tools, the pen tool - don't work at all, just do not respond when you create a form he treats it as if I clicked once on (which jumps through the window of rectangle to create the size entry..) the same situation occurs in Photoshop as well (maybe all software Adobe CC). I tried everything that was suggested on the forum (some of the links below): all other software in the background removal (spotify, 1password, etc.). I also tried with the help of different sets of keyboard and mouse, or with and without wire, still no luck. A situation that eventually works is that all the work of software perfectly fine in safe mode, then I restarted in normal mode, trying to kill any background process that did not work in safe mode, anyway... not working do not at all...

    References:

    (Illustrator CS6) Space bar works more apparently at random

    The space bar shortcuts: hand tool does and does not

    Illustrator is blocked on-site tool

    My computer specs:

    Windows 7 Pro 64-bit

    Intel Core i3-4130 3.4 Ghz

    4 GB OF RAM

    OK, so finally I solved the problem. It turned out be a software conflict with a background windows service called synergy, so I disabled it in the service manager and everything works fine.

  • JJUJ of printing works is not for Iphone 5 s

    I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.

    Hello

    Go to settings touch id remove fingerprint and then add impressions back again.

    See you soon

    Brian

  • Searching for pictures of iOS 10 works is not as expected

    I have updated to a couple of my iOS devices (iPhone 6 and iPad Air) iOS 10, actually 10.1 public beta 1 now, but find the results obtained in the search of my library of ~ 5000 photos and videos quite modest.

    I very rarely get the images I'm looking for, if any.

    For example, 'find my photos from the Netherlands' Returns none so I have 122 in my library.

    The research of the city of Delft (that is the Netherlands) returns a single result, which, ironically, shows a screen indicating the word "Delft" on a local train.

    I wonder if there is the possibility of re-indexing of the library or the device can be done on a Macintosh, but I'm afraid user ios do not have such a luxury for now.

    In my troubleshooting process I spent from Italian to English, since this might be a reason for poor search results. But things have not changed.

    Of course, if I ask "Find my photos of the mountains" (or dogs by the way) I get decent results this image recognition works though, not much luck with geotags.

    Any idea?

    / P

    Wow!

    The answer to this question of mine has been overwhelming... (I'm kidding)

    In the meantime, FYI Apple has released the iOS 10.0.2 update that solves the problem of geotags.

    I can now find my photos from the low countries (or Switzerland or India also) and get the correct results.

    Nice

    / P

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • Firefox doesn't work does not correctly on Windows 10

    Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

    I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

    Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

    If you do, we can give specific suggestions.*

    If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

    * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

    1. Open the Avast dashboard on an affected system.
    2. Select settings in the left side menu.
    3. Adopt a Protection Active.
    4. Click on customize next to the Web Shield.
    5. Uncheck the option "Enable HTTPS analysis", and then click ok.
  • WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

    WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

    Try to do these steps, it should help:

    1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

    2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

    3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

    4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

    5. return to the home screen and open whatsapp.

    6. go in the settings, press Whatsapp and turn back.

    7. open whatsapp again. It should work now.

  • WhatsApp works do not on iphone6 9.3.2

    WhatsApp works do not on iphone6 9.3.2

    Pls help me

  • functions of YouTube works do not (such as adding to the playlist comment)

    Hello.
    functions of YouTube works do not (such as adding to the playlist comment) has stopped working, they are still working for the same account on chrome or another browser. (when it happened I didn't update or downgrade programs, addons, plugins that run in firefox or chrome, I don't see why all of a sudden).
    so I can't like videos, I get the message 'feature not available try later', can't add videos to the playlist (whole playlist including fav, as: Watch more later playlist pre made by youtube) and can't comment, for these 2 functions, I get the message 'invalid request '.
    all this happen again and many times, they stop or I can't make it work with reboot, refresh, try again.
    I did a fresh install of firefox and all it's the addons, plugins, same installation fees of adobe and divx, vlc products (which have the plugins or addons in firefox)
    After installing I could like comment add to playlist, before the snap all the addons, but I could only play HTML5 in youtube, any video that had no HTML5 support required at adobe. (after that I installed adobe it worked until I restarted the browser).
    now it does not work yet. (to disable, uninstall all the addons, plugins does not affect the problem)

    Some issues may also occur because of ProxTube - at least, I realized that I was was instantly redirected to the first film in the playlist on youtube - having no chance to see the entire playlist. It works when I disabled ProxTube.

  • Leader: Open Recent works do not. It appears as recent File: Open: clear all.

    Leader: Open Recent works do not. It appears as recent File: Open: clear all.

    Hi guy,

    Maybe a recent system update has reset your system preferences > General > recent items to zero.

    Type a number (for example, 10);

    Quit the system preferences;

    Leave the Pages then revive Pages;

    Open some documents to repopulate open the recent item.

    Any improvement?

    If no improvement, shut down your computer and restart.

    "Recent articles" are at the level of the system and refers to other applications, not just the Pages.

    Kind regards

    Ian.

  • Adobe flash player not working does not or does not appear as an application under Tools, options

    Adobe flash player not working does not or does not appear as an application under Tools, options

    If you can't Flash 11.3 to work and need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • Is it possible to automatically check all bookmarks, then remove the works do not bookmarks

    Is it possible to check automatic all bookmarks and remove the works do not bookmarks

    Try this extension:

Maybe you are looking for

  • MainStage randomly change patches with Korg nanokontroller 2

    Help! I have spend hours setting up 10 patches for a mainstage concert constantly saving everything than to go back and find that my tasks evolve at random.  After putting a text parameter with the predefined names, I see that for some reason any cha

  • Impossible to open a page after clicking or use the simple pass program

    When I go on a web page if I try to click on a link or a button on the page nothing happens, no new page opens, or whatever it is. If I try to right click nothing happens. no long, he asks if I want to save a password since I use simple pass. This is

  • When I leave my email msn pop up appears asking that I have access to msnupdate.exe

    Original title: msnupdate.exe When I leave my email msn pop up comes to ask that I have access to this.

  • Windows Embedded Compact - update Windows 7

    Hi all I'm looking to patch my compact Windows 7 devices shipped with latest from here; Windows patches https://msdn.Microsoft.com/en-us/library/dn205267.aspx The devices are not on our field (but may be?) I have WSUS, SCCM and manual option. I have

  • Corrupted system file

    I have files corrupted in windows system 7.      SFC/scannow can't fix them. Is - that interfere with the installation of Win10?  I had this problem for about a year by year and a half. I tried everything and has therefore supported without success.