WRT1900AC - together open the ports of the specified destination IP address range

Similar Questions

• TrueSuite Fingerprint error "error: could not open the specified database.

  Hello

  I bought new Toshiba Satellite P300-PSPCCA two weeks back and fingerprints worked very well. Suddnlly stoped working. I was getting connection to fingerprint for the unavailable error message when I start my laptop. I try uninstalling and reintalling software Truesuite and dirvers but no luck. I downloaded the latest version of the software from toshiba Web site but still no luck.
  I was looking for a solution and I have read on several forums that must back the driver, if who does not then the only solution would be the factory default setting.

  I try to roll back the drivers, but still, it does not solve the problem. Finally, I put my laptop to factory default and still having the same error message...
  I also tried to delete all fingerprints via the Truesuite software but I get "error: failed to remove fingerprints...

  It has no option in the bios to wipe the fingerprints of memory... because I saw in IBM there is option in the bios to remove the fingerprint via bios... but not at toshiba...

  I really need help with my problem... Please... someone help me...

  Kind regards
  Jay

  Hello

  These questions are not easy to solve. Many people have noticed problems with this software and everything what you have done is OK, but one thing is strange to me.
  After the new installation of the operating system using the Toshiba recovery image everything should work perfectly. After doing this you have the same situation as after the purchase and start. Then I don't understand how you can have this problem again. The fact is that the stored data will be removed by cleaning the drive HARD or OS recovery to factory default state.

  On this forum, you will find many similar topics. Please put impossible to open the database specified as search terms in the advanced search option and check the listed topics. You may find the final answer.

  Good luck!

• When I open the browser any web address displayed in the browser window

  The first time I opened Firefox v21 or now 22 that the web address of my home page does not appear in the pain of nav. If I go back to the homepage address shows. I changed my home several times and it makes no difference. Windows 7 is the operating system

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• several L2L ipsec VPN to the same destination (ip address)

  Hi all

  im lookin to establish an a L2L ips multiple tunnels (a tunnel for each subnet) of my cisco asa 5510 to the same destination.

  should the cisco asa capable of this?

  How can I do?

  concerning

  You can do this if you want to say-

  Lets say site A - got 3 subnet and Site B has had a.

  In this case, you need to do is to add ACL to crypto.

  Thank you

  Ajay

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• ORA-00210: could not open the specified control file

  ORA-00202: control file: ' / u01/app/oracle/oradata/DB11G/STANDDB/control01.ctl'

  ORA-27037: unable to get file status

  Linux error: 2: no such file or directory

  Additional information: 3

  ORA - 205 marked during: ALTER DATABASE MOUNT...

  Did you check the alerts log.. ?

  have you checked the control file is available in this mount point... ?

  When you have this error... ? I mean what you're trying to do... ?

• Cannot open the link to the external site pdf to Word 7

  I created a link to a pdf file in a Word 7 document.  The pdf is located on an external website. I get the following message appears when you try to follow this link - Ctrl + click.  I use Windows XP SP3.  The pdf file can be opened in IE and Ff.

  Error message: cannot open . Cannot open the specified file.

  Any ideas gratefully received.  trisht

  Trisht Hello,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to the word and would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  Discussion Questions General Group

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Open the file using InvokeQuery

  I have successfully implemented action on the PART, using the following code:

  InvokeActionItem* shareItem(InvokeActionItem::create(
      InvokeQuery::create()
          .parent(page)
          .invokeActionId("bb.action.SHARE")
          .mimeType(mimeType)
          .uri(fileURI)));
  page->addAction(shareItem, ActionBarPlacement::OnBar);
  

  It works beautifully. For each file my application download and store in the file system, a menu of ACTION item appears, that I can use for example to send the file to someone else.

  Now, I tried to implement the same for action OPEN to open a file in a different application. This does not at all. Here is my code:

  InvokeActionItem* openInItem(InvokeActionItem::create(
      InvokeQuery::create()
      .parent(page)
      .invokeActionId("bb.action.OPEN")
          .mimeType(mimeType)
          .uri(fileURI)));
  page->addAction(openInItem, ActionBarPlacement::OnBar);
  

  But I only get this in the log:

  Warning: 15:09:54.649 InvocationWrapper::onQueryFinished: no matching result from Menu Service for query
     mimeType="application/pdf"
     uri=QUrl("file:///accounts/ ... /myFile.PDF")
     data= ""
     metadata= QMap()
     perimeter= 0
     action= "bb.action.OPEN"
     target= ""
     invokerIncluded= false
  

  I also tried to use the 'data' instead of 'uri' and passing in a QByteArray that contains the bytes of the file. This does not work either.

  Curiously, if I leave aside the 'data' and 'uri', it works. A menu open item is displayed, which lists the applications that can open the specified MIME type. But of course this menu opens only the apps, it does not pass the uri of a file or data file.

  Is this a limitation of devices Dev Alpha? Or y at - it another way to open files that are stored locally in other applications?

  They are in the data area. But it wasn't the problem. I now have the confirmation that everything works as expected on a real device of the Z10. So the problem seems to be a limitation of the Alpha Dev OS.

• Open the two shapes in a window?

  What happens if I want to open two forms in a window (6i) that I can work on both at the same time.

  In the forms help system, take a look at the differences between the built-ins CALL_FORM and OPEN_FORM.

  Call_Form:
  Description
  Executes a specified all shape keeping the active parent form. Oracle Forms run the shape called with the same preferences Runform until the form parent. When you leave the form called Oracle Forms processing resumes in the form of appellant to the location where you launched the appeal to CALL_FORM.

  Open_Form:
  Description
  Opens the specified form. Using OPEN_FORM to create multiple form applications, that is applications that open many forms at the same time.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Linksys WRT1900ACS shows all the ports that are open and firmware restore.

  Hi bought a new Linksys WRT1900ACS and has the following questions.

  a. How can I determine whether version hardware version 1 og 2.

  b. making a portscanning on the Linksys WRT1900ACS for the internet I found that several ports where free.

  When I went into the Setup, I get only portforwarded 20/21.

  I could access my internet QNAPS 3 + more.

  But the router WRT1900ACS didn t show this when it has been planned, why?

  I now that the QNAP may change the port settings, but I do not have "done this or asked for it", but why it does not appear

  When I log in the WRT1900ACS via Smart Wi - Fi.

  (can not see all 3 QNAPS when I use my linksys EA6500 router.)

  c. After you have determined the B. I tried to Flash the firmware with the firmware OPENWRT. But now I can access the WRT1900ACS and the WiFi is not charged more. The normal router works. How do I get:

  D: flash the original firmaware (via lan)

  e: what OPENWRT firmware has GUI and can be recommended for WRT1900ACS and where to download?

  f. are there links to og to youtube which is very imnformative to do this?

  Thank you

  John

  [email protected] wrote:

  Hi bought a new Linksys WRT1900ACS and has the following questions.

  a. How can I determine whether version hardware version 1 og 2.

  Thank you

  John

  This must appear on the label of the product below.

• In XP, when you try to install the printer, get error "the specified port is unknown."

  See the title of the question.

  * original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed

  Thanks for your help. I am not a comp read and write to do all this.  here goes

  No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.

  Middle neck is the same. Intel

  the RT is Windows 2000 or xp.

  It's what I expected.

  Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.

  This is not the case.

  1. open Windows Explorer and type C:\Windows\system32 into the address bar.
  2. find usbmon.dll
  3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512?  If not, is what version?
  4. now, go to the C:\Windows\system32\drivers folder
  5. what version is the usbprint.sys file?

  You have a copy of each file in C:\Windows\ServicePackFiles\i386?  If so, what are the versions of these files?

  If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders.  Then restart.

• FTP connection refused with FTP client to open the port in the firewall ESX

  Hello.

  I just installed an esx 3.5 U4.    We have an FTP server where we all night to make a copy of all our VM.

  This ESX may not put the files in the FTP server... I open the FTP client port on the 'profile terms' - & gt; Firewall tab without problems and

  I can connect with the FTP server... but... I can't do a LS for example, can I change to a different folder, I try with passive mode works... but

  It does not work.

  FTP server works well because other ESX work with her, and I do my windows XP with the same user/pass login and it works...

  Any idea?

  Thank you very much

  # ftp 192.168.18.15

  Connected to 192.168.18.15 (192.168.18.15).

  Welcome to 220 xxxxxxxx

  Name (192.168.18.15:morado): vmbk

  331 please specify the password.

  Password:

  230 login successful.

  Remote system type is UNIX.

  Using the binary mode to transfer files.

  FTP & gt; Backup CD

  250 changed Directory successfully.

  FTP & gt; LS

  227 entry Passive Mode (192,168,18,15,72,91)

  FTP: connect: connection refused

  FTP & gt;

  Looks like the second TCP connection for file transfer (which is also used in the list of directories) from the client FTP on the server fell. Have you tried completely disabling the firewall with esxcfg-firewall - allowOutgoing (can try esxcfg-firewall - allowIncoming, although it should not be necessary in the passive FTP mode)? This command sets the iptables chains of ENTRY and EXIT to accept instead of the fall.

  I tried esxcfg-firewall - e ftpClient and it worked fine for me.

  You could also post your esxcfg-firewall OUTPUT string parameters - q.

• Open the application help in the specified monitor

  Hi all

  I work in a project that requires multiple monitors, each showing a different VI. Each of these screws has a 'Help' button that will open the help file compiled from the location mentioned in the hard drive. Now, I would like to open this help in the specified monitor. Suppose that if the user clicks on 'Help' in the second monitor, I would want this window to open it in the second monitor. Any suggestion on how to achieve this?

  Thanks in advance,

  Luxama

  Thanks Shivam Awasthi and Germain. By help, I mean the help files compiled with extensions *.hlp or *. chm. I use 'online Help Control' VI under range of dialogue & User Interface to open the help file. But it is still open in the monitor by default/primary. I would like to open in the monitor specified programmatically. I should be able to open it in according to watch her the user tries to access them from.

  Now I have the solution since the last post in this thread. I used the 'restore the window' and 'Move the window' live in the attachment to move the application window to another monitor by specifying limits entry.

  Thanks again.

  Luxama

• I can't figure out how to open the port of CD.

  * Original title: CD player

  I can't figure out how to open the port of CD. There are no buttons, and online forums have not helped. Any suggestions?

  Of course - just go on this PC (or computer) and r / click on the DVD/CD drive - you should see "eject" as shown below. Usually there will be a button in the center of the disc too... but sometimes well hidden tray! -Ric.

  

• Receives the following message after opening a downloaded game: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello!
  So I'm at the end of my rope with this one... it lasts for months, and I keep revisitng every two weeks to try and fix that and every time to be completely frustrated.  I found this forum tonight, so here goes...

  We downloaded a few games on the HP Games Web site.  We download them and everything works fine.  Then, we will open the games and this pop up error message:
  "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.

  These games used to run fine, and I have no idea why they now have problems.  We have a Vista operating system, 1 account who is the administrator, the Parental control is disabled (or if we believe).

  If anyone can please help it would be much appreciated!  We have a monthly membership to this site of game and continue to accumulate credits, but may not use it.  It makes us crazy!

  Thank you in advance!

  Hello Heathie,

  Thank you for posting.  It seems that the program is no longer on your computer.  This can happen if the game files are deleted, but the game itself has not been uninstalled correctly.  I recommend you to download the game again to a location on your computer where you can easily find and install it.  This should fix the problem.

  Please let me know if this helps you.
  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.