WRT300N does not
Hi, after working properly for quite a long time, today my WRT300N router could no longer connect to the internet. He now meets no more than 50% of the ping to her calls. In addition, the utility page on his ip address cannot be opened. In fact nothing of the internet are accessible, either by ip or dns name. The internal network has continued to function properly. I have two computers with certain virtual machines running on them - all virtual and physical computers can see each. My computers are connected by lan cables to the router. The wireless is the same - no internet access. No changes were made to the configuration of the router.
I tried to reset to factory settings, but it seems does not work either. By pressing the button reset for 5 seconds and nothing happens. Meanwhile, for the internet port LED flashes as usual, the LEDs on the flashing of the usual lan ports as well.
Can anyone help?
Thanks in advance!
Finally, I managed to reset my router, then restore the settings from a backup file. Now it works properly!
Tags: Linksys Routers
Similar Questions
-
WRT300N and Asus Eee PC 1002 H does not play nice-Wifi N
I have an Asus Eee 1000 H and 1002HA Eee. Both are running XP. I have a linksys WRT300N. All are supposed to support Wireless N. I got the 1000H running to 135 Mbit/s, but my most recent 1002HA runs at 54 Mbps, even right next to linksys. These are the settings of the WRT300N.
Network mode: mixed - if I select wireless only, it does not see the SSID but will not connect do not.
Radio band: wide angle: 40 MHz channel
Standard channel: 1-2, 412 GHz SSID Broadcast: enabled.
I use WPA with TKIP. Key renewal: 3600 seconds
Beacon interval: (default: 100 milliseconds, range: 1-65535) DTIM interval: (default: 1, range: 1-255) threshold of Fragmentation: (default: 2346, range: 256-2346) RTS threshold:
The driver installed is the version of the driver 7.6.1.149. This is the 1002H Wifi driver
Well, I tried WEP and WPA, and both do not work. But I went to WPA2 and that worked... I give up.
-
iPhone 7 more buttons outside does not
I've had my iPhone 7 + for about 2 weeks now. Every once in awhile all buttons outside to stop, volume up/down, power, home. The home button will still record and push and give the sensation of taptic and touchID works. The phone itself still works and I can answer texts and which do not use notifications.
The couple spent time he did, he came upon her in about 4-5 minutes, however it was about half an hour and still nothing. I want to restart my phone, but the switch does not work.
Has anyone seen this issue or know how to fix?
Thanks in advance.
I just experienced the same problem on my iPhone 7, I think it's a bug in iOS, but I am using iOS 10.0.2. Power + button low Volume allowed me to turn it off then turn it back on... Apple please fix this bug!
-
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.
But Google chrome works well.
So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:
2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection
-
Safari does not work after installing macOS Sierra
Safari and apple store does not work after installing macOS Sierra
Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.
-
My iPad Apple 3rd generation wifi + his cell phone does not work
MY 3rd generation Apple iPad, wifi + cell
model number MD408LL/a
Serial number DM * VGL
THE SOUND DOES NOT WORK
< personal information under the direction of the host >
All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?
-
I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone. iTunes sees it yet, but windows Explorer does not work. It seems that some setting has been broken through the update of ios. A way to solve this problem?
Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?
TT2
-
iPhone 7 more telephoto camera does not
Is anyone having problems with iPhone 7 more telephoto does not activate. I'll go to the camera application and press the 2 x zoom feature, but it appears to be not to activate the camera of 56mm at the front. I cover the lens with my finger, the camera on the right side and the iPhone always displays an image despite me concealing one of the cameras teo. I can't activate the second camera. It seems to only be zooming digitally. I'll do this outside and he'll only digitally zoom when I hide the second lens.
Im having this same problem. I heard from someone that he could not work until the next software update... but I have no idea and have not found anything in the online help. If someone else gets to know how.
-
Contact ID battery fast draining iPhone 5s does not
5s fast drainage and Touch ID sinice 10.0.2 iOS iPhone battery update does not
Restarted the iPhone since the update yet?
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
-
Open the link behind Mail does not work
Sierra using my link opened behind Mail does not work. The link opens on the top of the window.
This option works for me in Sierra... is working for you with your previous version of the OS?
-
Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?
Hey there Scotchman2926,
I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
If you cannot connect to the iTunes Store - Apple Support
If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.
Thanks to be come to the communities of Apple Support and let us know how it goes.
See you soon.
-
iPhone 5 home button does not work after ios 10
My 5 Iphone Home button does not work after update final IOS version of 10.
The home button works on the first push to wake the phone but it will not open the phone the second button.
I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.
You attempted to restart your phone?
You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears
-
New IMac does not, Apple does not change
https://www.YouTube.com/watch?v=UdUY038FwCI
I have this problem since I was the imac. I pointed out in 3 days. Apple does not change because I didn't buy that at its retailer. 3 months, still waiting.
What should I do?
Everyone pays even, but I get nothing (same lack offers as a freelancer). I think it's fair. What am I, I guess what to do?
Run the Apple Hardware Test > Apple Hardware Test - Apple help
-
Why Safary does not load the content of pages?
Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.
Sorry if my English is not good, I am a Brazilian who is still learning English
Your English is very good!
Redirects are usually due to adware or malware.
Download the run MalwareBytes.
It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.
-
13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
Maybe you are looking for
-
Question about creating Toshiba recovery disks
Hello I wanted to know if I create recovery discs, it will have my drivers wireless, video and sound on it, or I have to download again on the Toshiba site.Thank you, jane Post edited by: ukgal If I get a windows 8 CD and install on my computer would
-
How to reconnect the Mail on my Comcast account?
Mail lost its ability to access my Comcast email account. He had lost the ability to send until I updated to El Capitan yesterday evening and changed my password for Comcast today. I can log in and access my account window and Comcast webmail through
-
BB10 network plugin fails on the second call
Hi all I created a plugin(native extension) network that works very well when you call the first javascript application. The entrance to this extension is: {'url' ": '"
-
Model - Q5. OK, so after much trouble I took to remove some Apps etc to make room for my Q5 upgrade to version 10.3.1.2243, I finally managed in the upgrade of the phone. Shortly after, just at the moment where I thought I was ready, I started to rec
-
Use of the way of the hardware - iSCSi Netapp 10 Gb Ethernet
We have a client that wants to connect to storage iSCSi to the ports of the device on their interconnections of the XP of 6140 fabric, because they do not have the Nexus switch and they have too few ports. Is this ok? I know he is not taken in charge