WRT300N provides Wired internet only, no broadcasting wireless and inaccessible web utility

Similar Questions

• Every time that I start my computer, my 'wired' internet says network not identified, and I can't connect and I activate the router market?

  This only happens when I start my computer,

  I use windows 7
  I have acustom made
  Care,
  AMD athlon ii x 4 645 3.10 ghz processor
  NVIDIA geforce GTX 550 ti
  8 GB RAM
  and the 64-bit operating system
  If you need to know anything else please ask me :D

  Hello

  Thanks for posting the request in the Microsoft community forums!
  As I understand that when start you the internet computer says "wired says unidentified network". To get this fixed number, try the suggestions:

  1. which antivirus software is installed on the computer?
  2. don't you make changes on the computer before the show?

  Try the troubleshooting steps and check whether the problem is resolved.

  Method 1:
  Try the steps in the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  Try to disable firewall and antivirus installed on the computer software and try to connect to the internet:

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 3:
  You can also reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Links:
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• Behind a firewall for Internet connections and wireless and inaccessible

  My netbook (XP) was attacked by viruses and therefore the firewall has blocked the internet and wireless connections. I installed the new Norton protection and this shows the machine also Ok. Here's the question - how can I activate the connections again? I realize that he is probabl; is really easy, but I just can not understand. Your help is appreciated. Thank you, Steve.

  You can try to disable the Windows Firewall:

  http://www.Webcam123.com/en/FAQ/xp_firewall.html

  If you have installed the new Norton protection, I don't think that you need more Windows Firewall.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• I have an internet connection 100M but getting only 30 M wireless

  I have the internet connection of 100 M but getting only 30 M wireless.  How to increase the speed?

  Turning off time Capsule

  Turning your Mac off

  Locate your Mac... about 9-10 feet or 3 metres from the time Capsule to clear line of sight between the Mac and the Time Capsule

  Turn on the time Capsule and let it run for a minute

  Turn on the Mac and let it run for a minute

  Check the speed once again using a site like www.speedtest.net and report on your results.  (Do NOT use an iPhone or iPad to check wireless speeds.)

• Unable to connect to the internet... either wireless or wired.

  I used to get the pefect internet using linksys wireless but now I can't connect. Ive bought a router and it internet connects on my ps3 and my office but not my laptop.
  under the menu "choose a wireless network", it shows the router that I use for my other computer and also other shows open connections, but it connects to one of them. When I try connent to my router it trying to connect but then jump on it and then try to connect to linksys.  where it says so "limited or no connectivity.
  I tried the pluging the ethernet cable that I use on my desktop to my laptop and my laptop still won't connect even if its connected to the wire. so I don't think that its you just wireless. Ugh.

  Hello

  If there is a capacity of wire and it doesn't, forget for now wireless since there is little chance it will work.

  Dealing first with the wired connection, http://www.ezlan.net/debug.html

  When the connection of the wire works, use it to connect to the menu of the router (read the manual of the router) and check the wireless setting.

  Disable security wireless to the router and see if you can connect without security.

  Once you can connect without security, enable security.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Can I use my time capsule for wired Internet?

  The fundamental question is, I can connect my time capsule to my wireless internet router and then use the capsule to connect my iMac to the Internet with an Ethernet cable?

  The back story: I have an i7 iMac late 2009 that has worked perfectly until that somewhere around OS x Lion. The update came, and suddenly the wifi became shotty; intermittent connectivity that could last from 2 hours to 2 minutes and often, the computer would suddenly turns off. So, I just took an Ethernet cable from my gateway wireless comcast directly to my time capsule and then another was running for the TC to the iMac. It worked perfectly when the router and the iMac were in the same room. Since then, we moved and there is only a single coaxial connection of work in the new House, and this room that can hold your desktop. Now, I searched high and low for a fix for the problem of wifi, without success; reset the PRAM, change the wireless channel reset wireless packet, you name it I tried it (with the exception of a reinstallation of firmware lion before the airport summary-pretend). I really do not have the money to have someone come run an Ethernet cable through my walls now or to understand the situation of coaxial cable (I tried to do it me but there are about 10 outputs and the room that I want to use seems to actually be connected directly on a former satellite Hughes-NET on the side of the House). Now, this wireless to the dream of the Ethernet connection is my only option... Anyway I can make it work?

  The fundamental question is, I can connect my time capsule to my wireless internet router and then use the capsule to connect my iMac to the Internet with an Ethernet cable?

  The answer is not quite as simple.

  Yes... If your 'hand' wireless router is another Apple wireless router.

  No.... If your 'hand' wireless router is a part 3.

  However, you have two options if you have a 3rd party router that provides to your wireless network:

  (1) add an AirPort Express and it set up to 'join' the network wireless provided by your 3rd party product. Then, the AirPort Express can provide wired Ethernet cable of the Time Capsule and the iMac can connect to the time Capsule using Ethernet as well.

  (2) If you can not run the Ethernet cable... (always the best performance option)... a pair of Ethernet over Powerline adapters could be able to send the Ethernet signal via power lines the existing AC in your House.  In other words, the theory with EoP devices is that you already have the wiring in place, you must just adapters.

  An adapter would be located near your router 'primary' and plugged into an outlet. A short Ethernet cable connects to the router to the EoP adapter.  In contrast, an another EoP adapter is plugged into a power outlet near the time Capsule and a short Ethernet cable connects from the adapter to the time Capsule. Then, the iMac connects to time Capsule using a different Ethernet cable as well.

• How to set up LAN wireless and wired for simultaneous operation

  I use a Lenovo thinkpad running windows XP. I want to set up an independent network so that I can connect my hardware for debugging. At the same time, I want to be able to access the corporate network using the wireless interface.  My autonomous network consists of a Belkin router that is to act as a DHCP server, my laptop connected to a port on the router and my test material connected to a different port on the router. My wireless interface is configured to connect to the corporate network. With wireless interface and the ethernet interface (wired) enabled, when I am doing a config ip, I see that the devices get valid IP address, corresponding to subnets, they connect to IE the ethernet port gets IP address 192.168.x.x 172.x.x.x IP poster wireless interface while. But I am not able to ping or access sites on the internet, I am able to ping the router Belkin on the independent network.

  However, if I go under network connections and disable the ethernet connection to the local network can access the internet and my business network. Similarly, if I disable the wireless connection and that you enable the ethernet connection, so I am able to ping the router only and not my test equipment connected on the same subnet.

  If I configure the (wired) ethernet network interface to use a static IP address in the pool of IP from the router Belkiin (who is also a DHCP server) and set the IP Address of the Belkin router as gateway, I can access all the other devices on this local subnet if and only if the wireless interface is disabled.

  The search for networks order is defined as the wireless and Ethernet.

  In my case, I need two interfaces to be active at the same time, as explained at the beginning. Appreciate any suggestions.

  Thank you.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information is useful.

• There is the Red Cross in the icon network and cannot connect to the internet, to detect any wireless network.

  * Original title: Internet connection problem

  It has red cross standing in the network icon and I can't connect to internet via USB modem or WiFi. It is also not detect any wireless network.

  Aalishan salvation,

  -Have there been recent changes made on the computer before the show?

  This problem can result from network card or driver settings.

  I will only refer to the suggestions provided by Gokul T on May 14, 2010 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-is-unable-to-detect-any-wireless/9a7386ba-7775-4039-940b-20fa537c6084

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the links.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Keep us informed on the status of the issue.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Apple TV / Hue lights have no internet connection (but the phones and computers do) - only disconnect Time Capsule fixed guess?

  Hello

  My Apple TV will sporadically lose access to my iTunes library (despite showing the connection and a signal strong) and Netflix will not play.  My tint lights are not recognized when this happens.  When I restart the AppleTV, then it shows that they are not connected to the internet.  However, my computer and the phone still have functioning wifi in these proceedings.

  The only thing that seems to restore connectivity is when I unplug my Time Capsule (version 7.7.7) and then plug it back in.  Can anyone offer solutions and the potential causes?

  Thanks in advance for your time and help, it is greatly appreciated.

  I don't have a simple answer to why not a quick fix to fix things.

  There are plenty of things you can try. None are guaranteed to fix things... but he is able to increase your blood pressure and make that upset you.

  Then. I need more information.

  What ISP modem or router do you use? Brand and model please.

  Who is the provider?

  How did the TC connected to it? What mode it's in, bridge or router?

  Is the wireless on the ISP router turned on?

  You have an excessive number of routers wireless around you?

  Use diagnostics wireless on a computer to check.

  You never reset the TC at the plant after the update of the firmware?

  If this isn't the case, please do so now. Redo the installation in accordance with the following instructions.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with Yosemite.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless. (try to keep names < 10 characters)

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels like this helps.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important... the IPs derived in all directions when Yosemite do not remember his name for 5 min after a reboot done for poor network management.

  I highly recommend this method on bridge of situation where you have the ISP router.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

  4. Please tell us if your ISP is now using IPv6 as who introduced a new set of questions.

• using hotspot as a provider of Internet services to delay questions express airport

  I have an Airport Express 2nd generation. I've set up as a home network with no ISP due the fact that I can't get an ISP where I live. I use it for connectivity to all my other apple and mac products, over some generic devices. I go through the implementation of change the settings to ignore the Internet LAN Ethernet, allowing me to have my network. So this is where it gets me confused after a few hours or a device is disconnected. So to continue. Then I take my Netgear wntce2001 streaming single channel device/path/device that I bought. now only available as a wntce2003 dealer local. I go into my menu of the hotspot browser, (Netgear 779 s aircard) and access my WPS in place. The Netgear wntce2001 at this stage only powered with one reset fees, like its new. Push button WPS on my Netgear select wntce2001 WP / parring on my browser and let them connect. At this point the Airport express will amber. Using AirPort Utility I get the double NAT message with options to switch to bridge mode. It all works very well. Now I can use all my Apple products to get on the line and play my generation 4 Apple tv, etc etc. Here's the problem when I remove my Hotspot or it turns off. I'm locked out/unable to join my ISP network wireless access point, that I created.  my book pro Mac will recognize is no longer the Hotspot may not use a web browser to access my hotspot and any other personal devices or belonging to my friends can see or access the HotSpot. Until I drive a half-mile away with her. Or perform a Factory reset fresh out of the box on my Airport express. Even if I remove the hotspot (short drive) then back it's always invisible until I get back from the Airport express. Once I reset the AirPort Express and reset all my other devices. I can rebuild the network and use it as I'm writing this Question (letter). Is anyone know why and how I can solve this problem. In short having a provider. Hotspot demographically impossible only internet access...  Thanks to an old man persisted.

  If I were in your situation... the first thing I would do, is check the wireless internet provider, which is an ISP btw... If they can sell you or recommend a router Ethernet instead of a hotspot. An access point has loads of limits and is not very well at all apple hardware.

  I confess that reading your description of how make you it work, it does not look good.

  I suspect that one of the main issues is the limited number of intellectual property which generally offer wireless ISPS... 5 is the common number.

  You are really not on the express of all... the devices are connect to the hotspot... and when something happens, you have exhausted all of the IP addresses.

  In any case we can begin to do some tests to prove it.

  Please post screenshots of the current configuration of the express with all this work to your satisfaction,

  I need the page summary of airport utility. That is to say it.

  

  Click on the button to edit, and then give me the Internet tab, tab wireless and Network tab screenshots.

• Access only "Local". Wireless connection problem.

  I have a Compaq Presario CQ60-211DX running MS Vista. Yes I know. in any case, I am able to connect to any available WIFI, except my personal home WIFI. If it is directly connected to the ethernet cable, I'll have internet, but once I disconnect it-i lose. My wireless says "Local" only signal I've tried everything. To restart all electronic devices which means my internet to read on the fourms a lot, a lot. I used the Norton removal tool, I did the regedit, MS Vista update, checked for drivers updated and nothing else I can read up. SO PLEASE! Help!.

  Hi RedskinsBnG,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         He has already worked?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Solve problems, find wireless networks

  Windows wireless and wired network connection problems

  Reference: wireless networking: frequently asked questions

• Wireless and wired router, DHCP and "visibility".

  Okay, it's a bit complicated, but I'll explain better than I can.

  I have a wired Linksys RV082 router. It works very well but is not wireless.  I have a Cisco/Linksys E2500 wireless router for my wireless devices to use.  the RV082 is the network of 192.168.1.x. The E2500 is the network of 192.168.0.x.  Cable Internet goes to the RV082 Wired, and a line out from there to the wireless router.  This all works fine except for a few disadvantages.

  I have an iPad that connects wireless and some of the apps offer a http:// option, so I can transfer files to this application.  I also have a network printer connected to wired and wireless devices do not.

  I have 2 problems:

  (1) in order to transfer files from my laptop (that I hung on the cable network most of the time), I disconnect the wire, wireless, then I can transfer files.  Œuvres, but it's embarrassing.

  (2) I want a netbook that I have on the wireless connection to print on my printer wired network.

  It seems that the 2 networks do not see each other.  Here are the things I've tried:

  (1) I disabled DHCP on the wireless router.  My thought is that requests for an IP address to the wireless router has sent will be transmitted along my wired router... NOT.  On my iPad and Wii, they could no longer connect wirelessly. Strangely enough, with the disconnected wire and wireless connection with my laptop, I've still was getting a 192.168.0.x IP address, even if the DHCP service is disabled on the wireless router.

  (2) thinking I would put manually the wireless router on the 192.168.1.x network, instead of saying things to get an Internet connection IP dynamicaly, I manually the IP value is 192.168.1.245.  Serious mistake.  I couldn't connect at all anywhere then.  The only way I could fix it was to hang on to my laptop computer, assign a static IP address to my laptop on the same network as the router, then I was able to get to the configuration page and to put things like he was.

  Another thing... Even when I'm connected only plugged on my laptop and wireless is disabled, I ping 192.168.0.1 (the wireless gateway) and it returns a value. But, when I try to go in a browser, I get a "page not found" error

  So, how can I get these two networks to play well and see each other?

  Thank you

  Jesse

  Put the router E2500 'bridge' mode and it will transmit the RV082.

  Assign E2500 DHCP, an IP address for itself of thje RV082, it will just be for access to the web administration E2500. System powered via the E2500 wired or wireless IP addresses will be obtained from the DHCP server on the RV082, and these will all be on the same subnet as designed to be plugged into the side of the RV082 LAN.

  Should allow you to do exactly what you want to do.

  I have a similar setup here works well with an E4200V2 right now.

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky