WRT54G - page configuration Linksys in Italian (no English)

Similar Questions

• How can I switch to after the effect of the Italian language English?

  How can I switch to after the effect of the Italian language English?

  Hello

  Please see change the language setting of the Adobe Creative cloud applications if it a CC license.

  Otherwise follow an Adobe product for another language or version of trading platform

  Hope that helps!

  Kind regards

  Sheena

• Why my pages are open in Italian instead of English

  opening pages especially youtube and even translate open in Italian instead of English, how do I make the default English

  1. Press ALt or F10 to see the menu bar
  2. Click Tools > > Options > > content
  3. Session language, click on choose buttons...

• Cannot access the configuration of my router (wrt54g) page

  I can't access the page of my router (wrt54g) configuration after the installation. The router works fine, but whenever I try to connect to 192.168.1.1 it says the password is incorrect. The first time that I put up I changed the default user name and password and I thought I'd simply forgotten, so I reset the device. This time I don't change any of the default values, and I can not even log on. I have to reset it several times, and you're just annoying. Anyone know how to prevent it from happening? I thought it might be a firmware issue, but I can not find all downloads for my version of road ' rs (V8). I use a macbook pro, osx 10.9.2.

  My neighbor has pretty much the same question. Did some research and found many people with similar problems. Probably time for a new...

• Configuration Linksys WAG120N for cable internet

  Hi I am not able to configure the wireless router linksys for my Internet Bill fiber. Please help me.

  The ISP gives necessary PPoE and dynamic IP connection. I have the user name and password to connect to the ISP and internet active.

  But I am not able to configure the router to connect to the internet. Please help me

  Here's what you can try, I know I did it before with a Modem Router but not this particular model.

  Make sure you do not connect your computer to your router via an ethernet cable, turn off PPPoE and Wi - Fi features on your computer so that it uses only the Ethernet connection.

  Then access the WAG120N page.

  I have a question though, when you connect the cable from your modem to the router? Is the DSL port? Or on the ethernet port? If your modem cable is an RJ45 connect it to port 1 on the WAG120N, then on the page of the router you must activate something.

  Click Ethernet under Setup, and then select use as a WAN Port, select the connection type in the menu drop-down (select PPPoE). Enter the username and password provided by your ISP, then save the settings.

  

• Libretto W100-D10 - change OS language from Italian to English

  Hello

  I have a Toshiba Libretto W100-D10, who have an Italian version and wants to set up initially in
  English.

  Any help or info appreciated, thanks.

  Hello

  As far as I know the Win 7 Home Premium has been pre-installed on this laptop.
  Cannot change the language of the OS in a Home Premium version.
  Only the enterprise and Ultimate editions support Multilanguage pack.

  Die if you must install a version English of the Win 7 Home Edition on your W100 or you would improve the Ultimate or Home Premium Enterprise version and then you must install the English language pack

• How can I change my language from the window of the Italian to English?

  Hi Sir/Madam

  My name is Ravi. I have a laptop from Packard brought Bell.I of Italy and its language is Italian.   Please help me change my window of Italian language at English.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-display-language

  or

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/d58fb37b-CB02-41C8-986f-22582fd35a12

  You didn't specify what operating system you are using so the above is for Vista or Windows 7.

  TaurArian [MVP] 2005-2010 - Update Services

• Change the language on the netbook from Italian to English

  My daughter received a netbook Samsung of his uncle, the Italy tour. The netbook has Windows XP installed on it, but it's in the Italian language. How can I change to English?

  Contact Samsung and see if they will send you an English factory restore disc. There is no way to change XP Home Edition in another language without having a full version of XP in the desired language and do a clean install. Otherwise, the machine should be returned and bought a running an English XP instead.
  MS - MVP - Elephant Boy computers - don't panic!

• Change language from Italian to English Windows 7

  Originally, I had Vista Home premium 32-bit English and upgraded to windows 7 Home premium but now I live in Italy and could not get in Italian. There must be a way to at least change the display language. Its available in all languages local but can not is not English. Pleeease can help you.

  Hello lovejunky,

  Thank you for visiting the Microsoft answers community.

  Language packs are available to change the display language, but language packs are available only for Window 7 Ultimate and Enterprise versions.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-additional-display-languages

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configuration Linksys WPSM54G on new laptop with Win7

  Using a Linksys WPSM54G. Working on my old WinXP, bought a new laptop with Win7. Tried to set up as a TCPIP will still not connect. Have seen a lot of posts on this issue, but can't get it on my pc.

  After reading the endless forums on this topic and try LPR printing as proposed (without success), I finally found a simple solution to get the WPSM54G print server work on Windows 7 (64 bit in my case version). Simply download the latest driver for the Lnksys site.  Once you have unzipped the download, right-click on Wizard.exe, select Properties, click the result, then check the compatibility mode box and select Windows Vista (Service Pack 2).  When you run the Configuration Wizard and click on Computer Configuration, instead of the boring message "OS not supported", the driver installation ends normally and you can start printing.

• How to change language of windows system 7 starter from Italian to English?

  I bought a laptop from the Italy and have a windows 7 edition starter pack.

  I know how to change the system of Italian language to English of wana?

  concerning
  Aditya jony

  Use this tool:

  http://www.froggie.SK/index.html

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Change the language on the new laptop from Italian to English

  My old neighbor bought a new laptop (ASUS KF3U series; windows 7) and when it starts for the first time managed to change the language to Italian. I need to change this back into English for him.

  I went to control panel > clock, time, region > location & UK tab selected. on the format tab it doesn't seem to be an option for English uk just Canadian iglese, Australian etc. I turned off the pc and reboot but nothing has changed.

  I used my own laptop to go through menus to see what to do as, of course, on the other laptop, everything is in Italian.

  Help would be appreciated. David

  You can do it is that it has Windows 7 Ultimate - see how I can change the language of my laptop

• Change the alert language from Italian to English

  Hi all
  
  Need help! ...
  
  I had an Italian customer who has installed OEM, now we give support for DB environment there, we get alerts OEM in Italian so needs to change the language to English.
  for example
  
  < < < < <
  
  City name = *. .NET
  Likelihood di tipo = Istanza di database
  Host = *. .NET
  Metrica = user sottoposto ad audit
  Valore della metrica = SYS
  Username_Machine = SYS_ *.
  Indicatore time = 22-Dec-2010 22.00.51 THIS
  Severita = Avvertenza
  Message = the user SYS ha da connection it eseguito *.
  Nome regola di notification = Notification
  Proprietario regola di notification = SYSMAN
  Conteggio notifiche = 1
  > > > > >
  
  SR Oracle high sums offered to reintall oem, we did it but it not worked.
  
  Environment is Windows 2003 server.
  
  Concerning
  
  Pankaj.

  It is certainly an interesting question (how to set the language of alerts / notifications)...

  I understand that 'English' is the default language for all the alerts and notifications that Enterprise Manager / GridControl
  triggers (and sends around e-mail). Therefore, I do not understand why you always receive notifications in Italian after you have reinstalled
  OEM (you have the choice to choose a language during the reinstall?).

  If you have an account for the following note support.oracle.com might be useful:

  Notification by email received with content in two different languages [ID 409124.1]

• Configuration Linksys LTR214 VPN

  Sorry to ask a stupid question, but how do I do on the side of the Modem cable to configure a VPN?  I had setup a VPN software but could support only a single connection; I bought this unit and you want to set up iit upward to access my network remotely.  It is the same that previously, only enter the IP address of the LTR214 instead of the host computer?  Should I activate/install the Open VPN or options easy VPN on the router?  I would have rather just several connections connect to the use of VPN, that I couldn't do with the Modem to hust. THX in advance D Miller

  You must cancel the bridge configuration you had before the switch to the DMZ.

• XDB user name and password to access the page configuration EPG on a pluggable database APEX

  Hello

  I have a base shared of the Oracle (12.1.0.2) 12.

  I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

  Connected to the PDB, the registry says:

  Name of the ID Version State

  ------------ ----------------------------------- ------------ ----------

  APEX Oracle Application Express 5.0.0.00.31 VALID

  I want to configure the EPG for this PDB.

  I did the following (in this order):

  (1) race: apex_epg_config.sql

  (2) race: exec dbms_xdb.sethttpport (8080) - the firewall is open for this port

  (3) race: change the anonymous user account unlock;

  (4) run:

  Start

  () DBMS_NETWORK_ACL_ADMIN.append_host_ace

  Home = > ' *',

  As = > xs$ ace_type (privilege_list = > xs$ name_list ('connect'),)

  principal_name = > "APEX_050000"

  principal_type = > xs_acl.ptype_db));

  end;

  /

  I find myself with the APEX-based users:

  Account

  Status of user name

  ------------------------- -------------------------

  FLOWS_FILES EXPIRED & LOCKED

  APEX_050000 EXPIRED & LOCKED

  OPEN APEX_REST_PUBLIC_USER

  OPEN ORDS_PUBLIC_USER

  OPEN APEX_PUBLIC_USER

  OPEN APEX_LISTENER

  ORDPLUGINS EXPIRED & LOCKED

  ORDDATA EXPIRED & LOCKED

  ORDSYS EXPIRED & LOCKED

  ANONYMOUS HAS EXPIRED

  ORDS_METADATA EXPIRED & LOCKED

  I used the documentation:

  https://docs.Oracle.com/CD/E59726_01/install.50/e39144/EPG.htm#HTMIG386

  When I run from the browser:

  http:// < IP address of the server >: 8080/apex

  I get the messge:

  "APEX request a user name and password XDB"

  Does someone has encountered this situation in a PDB file?

  Thanks in advance for any information.

  Thanks and greetings

  Hi Patrick,

  Laury wrote:

  I have a base shared of the Oracle (12.1.0.2) 12.

  I have an APEX PDB 5.0 file. There is no APEX installed on the CDB (root).

  I want to configure the EPG for this PDB.

  I find myself with the APEX-based users:

  Account

  Status of user name

  ------------------------- -------------------------

  ANONYMOUS HAS EXPIRED

  The problem is the ANONYMOUS account has expired.

  Reference: Re: XDB username and password

  I think that this issue is addressed in your previous thread so: Oracle APEX server requires a user name and password of the server said XDB?

  And here's the thread where Jason explained the reasons: Re: installation of the Apex (4.2.2 on 12 c)

  Kind regards

  Kiran