WRT54G2 V1 a on and outside, unreliable internet connection since Saturday

Wireless router does not 2 macs and 1 of our iphones to connect to internet, but allows another laptop mac and iphone belonging to the family to connect... very annoying and frustrating! Everything worked very well until Sam h. The connection of the airport on the mac G5 desktop and MacBook Pro have both a connection airport with message saying something on "ip auto assigned, may not be able to connect to the internet." The other 2 (an iphone and a MacBook Pro) were lucky and didn't have any problems.

Restart the router works for a bit on the elements having problems, but then it cuts the internet once again.

Have been on Apple forums and have seen the same question and I would do my own test to see if maybe it was the mac system software or the modem - brought the laptop with the problems connecting to Panera today for lunch and the wifi worked well so this tells me that the modem is the problem of thought.

At home and update the firmware to the latest version (from March), but seems the question still exists!

Seems other people having this problem here on the forums of Linksys, so...

Linksys what is your resolution for this?

After an update of the firmware, you must reset the default router, and then configure the router again from scratch.  If you have not done this since your last update of the firmware, please do it now and see if it solves your problem.  If you have saved a router configuration file, DO NOT use it.

To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...
Also, make sure that your computer is configured to obtain an IP automatically, disable any firewall, the security software on the computer before you try to access the configuration page...

If your Internet Service is cable follow this link

If your Internet Service is DSL follow this link

Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

-Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
Please note the 1 WEP key as it comes to the security key for the wireless network...

Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

Let's see now if you can locate your network wirelessly on your MAC and try to connect, when you are prompted for the password, enter a dollar sign then enter the 10 digit WEP Key1 and check the box that says "Remember password in my kechain. This should help you stay connected to your wireless network without even when you restart your Mac...

Tags: Linksys Routers

Similar Questions

  • is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day.

    is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day. I have just hooked to the nbn (national broadband - Australia Network) and have just bought a wireless modem/router 9323 method. I set it up and it worked. I noticed that I have two internet connections when I go to access the internet. one is a broadband connection and the other is nettcomm wireless 9323. What gives with that?

    You have a connection wireless and broadband that you could use one or the other or both. It is recommended to use one at a time. Contact your internet provider and discuss the issue with them.

  • When I turn on my PC and before opening of session (before entering password and log in) internet connection exists?

    When I turn on my PC and before opening of session (before entering password and log in) internet connection exists?

    Yes.  The network stack is active as soon as Windows is running.  You can prove this by yourself, if you wish, if you can review your summary router network.  It should show the PC in question as being active.

  • Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

    Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

    Please let me know how to start.

    Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • WRT160N and disable the internet connection?

    Hi pipol there (^ ^) I just bought new wrt160n I change my old netgear, my question is why my Office internet connection is on and off, while the other wireless connection is fine, just as in my office. I have the ethernet port on my evga 680i on standing start that until I choose one of them for example. Ethernet n ° 3 after installing air everythings ok, but later, my connection start on and outside, I have to unplug the modem and router to return to the connection. right now im to my router by default, anyone can say what's wrong with my connection on my netgear b4 I do not experience this kind of problem, everything is smooth. Thanks in advance

    If you have version V2 of this router, you must downgrade the firmware because of a known problem.  Go here:

    http://audipages.com/router

  • Satellite L40 - 12K - unreliable internet connection

    My laptop sometimes connects with my local wireless network and sometimes is not (so the other pc's in the House do, then there is nothing wrong with the internet connection).

    Sometimes it stops even while I work. Sometimes the little orange light indicating that I have a connection is on, sometimes I can't get on with the slide switch backward. Perhaps the slide is broken? I tried to restart a couple of times: it sometimes works, and sometimes it doesn't. It's a gamble whether or not I have a connection.

    Someone had this problem?

    Hello!

    Normally the WiFi led should always light if the switch is set on you and that you have enabled using FN + F8.
    Did you check that?

    But you should try to update the driver WLAN and BIOS before going to an ASP. Two updates that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    You use internet security with firewall software? If so, you should try to remove it and use only Windows Firewall and another program like AntiVir AntiVirus (Freeware and very nice). Then test it again.

    Good luck! :)

  • P850 satellite and a WiFi - internet connection does not work well

    Hello

    My internet connection does not work with a Wi - Fi connection.
    I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

    All solutions?

    > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

    If such a problem would appear again start the console (window BACK in typing CMS in search)
    Here, use the command * ipconfig / renew *.

  • Satellite L305 - unreliable internet connection

    I have this same problem and it is really annoying (except I use a L305). Just to add to what the OP said, when the wireless light, for me at least, the wireless network adapter also disappears from the Device Manager. Sometimes my wireless will work several days in a row, but then stops abruptly. As he said, restarting sometimes helps, sometimes not. I found that disable and then re-enable the connection in the network connections Manager are the most effective way to operate but now today that only works for a few minutes and then my internet access becomes limited connectivity.

    I've updated my card drivers and which seems not to have helped but have yet to try the BIOS that I'm also going to reformat my hard drive tonight to clean things up a bit so I'll make sure you guys let to know whether that fix it somehow.

    (I know that it is not my home network either since I have this problem in several places)

    Hello

    Very strange, I mean if the WLan card disappear from the device manage WLan led doesn't light and so then it must be a problem of published material
    However, try the BIOS update and to use the recovery disk to set the device to the factory settings.
    Then update the WLan driver, reconfigure the WiFi network and check the functionality.

  • Problem with Vista and XP computers Internet connection sharing.

    I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

    Thank you

    Oscar

    It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

    • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

    or:

    • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • have keepsstopping and vista service, internet connection

    my computer guard losing conection to the network must keep reconnection sometimes must close and reopen have card air with full bars

    Hello

    ·         What happens when you try to connect to the Internet?

    ·         Have you received an error message?

    ·         Since when you are facing this problem?

    ·         What changes have been made before that happened?

    You can try the methods below and check if the problem is resolved.

    Method 1: Now you need to update your drivers network card on your computer and locate the number.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2: Also try to solve the problem of Internet access with the help of the link below:

     http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

     
     
  • Connect a Vista PC (host) with an XP PC in LAN and share the internet connection.

    I connect to internet using 3 different notebooks with Windows Vista with a wireless connection to a router and the DSL modem. I have a desktop PC XP computer in a secluded spot in my house, who does not have a wireless card. When I want to use the internet in Office XP, I connect it to a laptop using a LAN cable.

    I was able to do that with 2 of my notebooks (set up the network and share the internet), but with the third Vista notebook, desktop XP can't get the internet connection established. I was not able to detect which is the problem.

    First question: clues to debug this problem?

    Second question: I would like to start over again and configure everything again with this third book. How should I proceed?

    Turn on Internet connection sharing on the Vista wireless network connection.  If asked what to use for the home network connection, tell him to use the connection to the Local network. Then check the State of TCP/IP on both computers:

    1. On the Vista computer, right-click on the connection to the Local network, and then click on status > details . It must show:

      • IP address: 192.168.0.1
      • Subnet mask: 255.255.255.0
      • Default gateway: no
      • Server DNS = none
    2. On the XP computer, right-click on the connection to the Local network, and then click on status > support > details . It must show:
      • IP address: 192.168.0.x (1<>
      • Subnet mask: 255.255.255.0
      • Default gateway: 192.168.0.1
      • = 192.168.0.1 DNS server

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • HP G72 laptop with win 7 ultra randomly grave time and also the internet connection

    I have two laptops running wireless, HP and an old Dell with XPS. The Dell works well with wireless and Wired internet and printer. The two laptops are side by side and wireless to the router provided by my ISP, Time Warner. The Hp also works very well with/wireless internet and to the printer until it disconnects from the internet/printer, date in which I simply turn off the Radio by using the f12 key and then re - turn on the radio with the key and continue my work. Sometimes the interval on maybe 20 minutes and a few hours. The computer loses the date/time, also on some different random intervals and reset it as well as the internet delivered to a server provides only temporary reset for a random period. Seems one of the ntp servers provides longer periods of internet connection than most other servers, including those of the nist.

    It's way on my ability to fix, but from what I have learned, it seems this could be a timing issue applicable to both the disconnect from the internet and issues of specifying unstable computer date to the portable win 7 only.

    I'd certainly appreciate any suggestions on how to solve these two problems.

    Fred

    On March 8, I used Microsoft FIX IT to automatically reset the TCP/IP as suggested and restarted the computer and then reset the time. I haven't changed the time zone and guess that change from time to time would happen automatically. From that moment, the internet remains connected and the date / time is correct at the new time after 21hours which is encouraging. I do not understand how to reset TCP/IP would correct the problem of random disconnection of the internet, but I'll be glad if these two issues are cured and can only express my thanks to all who responded.

    Fred

  • How do I know if I use NAT and PAT for internet connections

    Hello

    I have a PIX 525 6.3 and I have a stupid question... I do a show xlate and I see that I'm using PAT to internet connections... The old man FW says that we come to the internet. What command can I use to confirm this... because it looks like that to me, we use PAT and NAT not for internet connections. I'm you Cisco router and switch engineer but I now have the responsibility of PIX and I want to make sure that everything is correct.

    Thank you

    No question is a STUPID question!

    Issuing the cmd: sho xlate detail and also sho conn detail and it will show you what you are looking for.

    Hope this helps

    Jay

  • Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

    Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

    I tried to work offline at home after working online for a while. The sign came and wrote

    «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

    However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

    "The network is not connected TRYagain.

    It was the only option, does not allow me to continue offline...

    You have an idea why I couldn't?

    An Internet connection is required the first time you install and your creative Cloud of license applications.

    You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

  • Satellite C850 and Win7 - no Internet connection

    Hey everybody.

    I lowered my Toshiba Satellite C850 - 19(d) to windows 7 but I have no drivers for the internet I get on this site, I save the driver but it not connecting to internet please help

    Hello

    I checked the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp - and, as I can see, your machine is supported for Win7 64 bit so you can install all the necessary drivers and tools and utilities.

    Driver LAN you can download here
    Driver WLAN, you can download it here (Realtek WLAN driver).

    Please test and send feedback.

Maybe you are looking for

  • B3P19A: composition of ink

    I would like to know the composition of the ink in the produts B3P19A / B3P20A / B3P21A / B3P22A / B3P23A / B3P24A page because: http://h10010.www1.HP.com/wwpc/AA/en/Ho/WF17a/A1-12771-64199-69422-69422-5338287.html?DNR=2 have severed all ties. All I

  • Satellite M70-337: random black/blue screen out of nowhere

    Hello I have random problems with a black or blue screen appearing suddenly with way now out of it, but to restart. I have no idea why, and that's a problem because I use a dj program and cannot be crashing on me during a concert... Any ideas why thi

  • Why can I get two different results from the same coefficients?

    I get two different results of the evaluation of the polynomial function. For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result

  • Help me fix driver errors, please

    Hi, there, I got Windows Vista software alerts restore problems on pilots to be fixed and do I need to format these drivers? I have some info on PC restored it.Restore method would then execute?Thank you.

  • reception of SMS via pre2

    Anyone who correctly receives the SMS on the touchpad on a webOS phone? I use pre2, make and receive calls is ok, but not SMS.