WRT54G2v1 - can't change from WEP to WPA2-Personal or Devil WPS
Hello. I have a router WRT54G2v1. I set up WEP with a couple of years. However, I want to go with WPA2-Personal for greater security. I tried to change the WEP setting by choosing WPA2 I want in the drop-down list existing wireless > Wireless Security in the router configuration window accessed via my browser. Immediately after that, I get the following message appears with the options "OK" and "Cancel". The message is this:
It will stop WPS WI - FI protected setup is not compatible WEP/WPA/WPAZ-company/Radius
If I say 'OK', I do not then get to select something from the menu drop down. I find myself immediately with the message each time.
If I go into the basic settings and attempt to adjust the configuration wireless on "Manual" of the current value of "Wi - Fi Protected Setup", I get the following message (with the same options as above). The selection of "Manual" returns immediately at the same time, thus denying me to change the setting.
Wi - Fi Protected Setup does not support WEP/WPA/WPA2-Enterprise/RADIUS. Please use WPA/WPA2-Personal.
So, I seem to be able to change the setting to WPA2 in WEP (or change to disabling WPS also). Any thoughts on what is happening? TIA.
Hi brianborutoo. Perform a factory reset by pressing the reset button on your router for 30 seconds. Be sure to saw this power will blink to make sure that the reset was successful. After that, powercycle your router for a minute. Try if it works. You try to browse another or another computer for insulation.
Tags: Linksys Routers
Similar Questions
-
Reset the router from WEP to WPA2
How can I RESET my router from WEP to WPA2?
Log in and change the WIRELESS security, see the manual
http://www.downloads.NETGEAR.com/files/GDC/WNDR3400V2/WNDR3400v2_UM_23JAN2013.PDF
-
How can I change from mm to inches in Page layout when you customize?
How can I change from mm to inches in Page layout when you customize?
This forum is for developers who use the LR SDK. Your post in the main forum of LR will be enough: need to change the dimensions of mm to inches of layout using custom calibration.
-
Issues wireless HP 7525 - increased from WEP to WPA2
Hello all - I installed my wireless security to WEP to WPA2, and I can't print on it.
I tramped through the wireless configuration the 7525 and the Setup seems to have worked.
I printed out the results of the wireless network Test and everything's fine, no errors on the print.
Can I print using the USB cable.
I'm not sure it's material, but I also started to use OpenDNS and made this change at the same time. I don't think it would make a difference, but I am mentioning just in case.
Unfortunately I can't print wireless, I received the error message "cannot communicate".
Any help?
Thank you.
Not a matter of WPA2. DNS? Go back into the router and reset it on your default values supplied by your ISP.
Say, download and run printing HP and Scan doctor, what - what?
Download it here: HP Print and Scan Doctor
-
I would like to know the steps to change the setting from WEP to WPA security, including steps to change the name of the wireless network or SSID if necessary.
Here's the situation: our home wireless network use WEP as the security or setting Mode. Daughter just bought an Apple Mac, which she is told requires the creation of WPA. I made the change to WPA-Personal as your link educated, but only this change has turned off our ability to operate wireless in our home and internet network. An online chat agent failed to provide aid because of the question of the guarantee, but he suggested that the solution would be satisfied if he could guide me through to change the name of the wireless network or SSID. He didn't explain. What I need are not all and all to managed to get the WEP key WPA change. Thank you for your consideration.
-
In photoshop, I imported an image and put it on transparent background. It's a very simple picture, like a drawing done in pencil. How can I change the color from black to white? I hope that my question is not a source of confusion, that I didn't Word always good things.
Invert
Shortcut Ctrl + I or CMD + I
-
I used tab DISPLAY in the top left to change my mind in 'full screen '.
Now I can't access the VIEW tab to restore. How can I change back so that this Menu will appear at the top of my screen?A few choices:
- F11 toggle full screen
- Move mouse in the upper part of the screen to menu bars, if show you them
- 'Alt + V' - to bring up the View Menu
More information:
- Firefox and other browser shortcuts (Comparison table)
http://dmcritchie.MVPs.org/Firefox/keyboard.htm - Keyboard shortcuts | How | Firefox help
https://support.Mozilla.com/kb/keyboard%20shortcuts - Netbooks - MozillaZine Knowledge Base
http://KB.mozillazine.org/netbooks
-
Satellite L750 PSK1WA: Can I change from 32-bit to 64-bit after initial installation?
I chose 32-bit during my first installation after buying my L750 PSK1WA-03C00R with i5 2410 M CPU.
Can I change to 64 bit so that I can access the 8 GB of RAM that has been installed.Thank you.
Hhmmm I think that this should be possible. You have to start the process of recovery once more
Check this Toshiba HowTo: how to do a system recovery
http://www.MyToshiba.com.au/support/items/FAQ/711 press and hold the power button for ten (10) seconds to turn off your device.
2 press and hold the 0 (zero) on the top of the keyboard (not the zero on the numeric keypad key) and at the same time, press the button power once to turn on your laptop.
3. when the Toshiba screen appears; release the 0 key.
* 4. If you are prompted to select 32-bit or 64-bit operating system; Click on suivant.*
5. When you are prompted by the warning screen; Click Yes to continue the system recovery.
6. Select recovery of factory default software; Click Next.
7. Select Restore to out-of-box state. Click Next again.
8 Please read and acknowledge this last warning screen
9. click on next to start RecoveryThis could also be useful if you're wondering why you didn't receive the disc:
http://www.MyToshiba.co.nz/support/items/FAQ/69 -
How can I change the name of a personal folder
I need help to change the name of a personal folder
Hello, asholland.
To change the name of your personal folder, you can change the name of your account.To change your account name, follow this path:
(
> Control Panel
> User accounts and family safety
> User accounts
> Make changes to your user account
> Change your account name
(> Enter a new account name)
|| -
can I change from Windows Vista to Windows 7?
is it possible to change my operating system from Windows Vista to Windows 7 without damage or change my files?
Hello
It depends on which version of Vista you have and which Windows 7 upgrade path is supported whether if you can do what you want to do.
Before purchasing Windows 7, follow these steps:
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
«Installation and reinstallation of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
See you soon.
-
File attributes can be changed from read-only on a global scale?
I just finished using Easy Transfer from XP on a Win7 machine on another PC and find that almost ALL of my documents, spreadsheets and Access databases has been changed read-only. I changed a couple of them to full access through the Properties menu, etc. and many prefer to be able to do on a global scale as I speak of hundreds of files that have been changed by this transfer.
Is there a way to do this on all my files on my hard drive?
Ronnie,
It just seemed to me that all I really need to do is to find a way to change MY profile for equal to that of the admin. I did it just for a few files and these files are no longer read-only... ! I hesitate to change my system to an ADMIN login for security reasons. I also changed the attributes of the lowest subfolder, then the above it and then I can open all of the files in these folders in r/w mode...
So, is it possible to automate change the attributes of all files folder and subfolders?
Fred615
Hi Fred
Yes, you must be connected to a Director profile.
If all these files that you want to remove the read-only attribute on the D: drive, perform the following steps. Use these commands exactly as written, including spaces.
1. open the elevated command prompt by using the profile administrator.
The location should display C:\Windows\system32 >
2 type cd\
Press ENTER
The location should now show C:\ >
3. Type D:
Press ENTER
4 location should now show D:\ >
5 type attrib - r *. * /s /d
Press ENTER
This should remove the read-only attribute of all folders and files on that drive.
Test and let us know the results.
Concerning
-
HP 4630: How can I change from German to English
Hello, my HP 4630 screen is in German, and I need to go back to English.
What should I do to change this? The HP serial No. is (deleted content)
Thank you.
Hello
Let's make that a test...
You will need to first make sure that the printer.
Press the home button at the top left then press the directional arrow pointing upwards, then press OK.
You will need to press OK again to enter the language option. From there, you will be able to select the desired language.
See if that helps.
-
How can I change from 6 to 9 boxes on my homepage? AND Firefox and missing label logo
I recently removed some adware and now I have 6 tiles/boxes showing when I open a new tab instead of the 9 that I used to have
How can I have 9 tiles/boxes showing instead of 6? (There are 12 boxes?)
In addition, Miss me the Firefox logo in the upper left corner and the words 'File', 'Bookmarks', etc. How can I restore them?
Thank you
Bill
Current releases (29 and following) the orange Firefox menu button has been replaced by the bar of three Firefox Menu button at the right end of the Navigation bar in Firefox and this button are always visible if the Menu bar is visible or hidden.
You can have the bar of menus visible through the context menu of a toolbar to have the menus as the file menu, print, print (Ctrl + P) and the bookmarks and history with the tools.
You can enable or disable switch title bar via the "Title bar" button at the bottom left in the palette to customize window.
See also:
-
Can't change from standard user to administrator.
Hello, am frustrated! Have an ebook sent to library-cannot open it because I don't have Adobe E-reader software. Tried to download it, but asked for an administrator password. This laptop was my teenagers... request him to enter his word of happening has not worked or she not sure of himself. So, I search for how to change me being a standard user to administrator. Try to do it, but after pressing change - nothing happens. I'm still a standard user! argggggh. I just want to read the E-book. Helllllp! (It's awkward, but I don't know what version of Windows, it is..) Sorry, stupid person).
If your teen doesn't remember the password she used, here are your options: reset Windows password forgotten
-
How can I change from read-only smart media card?
Card must be reformatted but says that it cannot format because it is read-only.
The instructions say that I cannot change the read-only but doesn't mean me how.
Any help in this matter will be greatly appreciated.
Skip a Pat
Hello
1. which card Media do you use?
2. you receive an error during formatting?
3. What is the brand of the Media card?
4. were there any changes made to your computer before this problem?
I suggest you try the methods mentioned below and check if it helps:
Management of disk access by
By clicking Start (orb)> Control Panel> Administrative Tools> computer management>disk management. Disk management should list drives/cards connected to the system and also to show what type of file system they are and whether they are healthy or not. I would just reformat the card, do not change the type (example: FAT, FAT32, or NTFS) file format for doing so, your camera or device may not recognize.
Hope this information is useful.
Maybe you are looking for
-
I want to go back to Firefox than Firefox 32 31. How can I do this?
I found that Firefox 32 is not compatible with the theme of Windows 7 desktop that I currently use (high contrast white theme). I tabled this question like a bug on Bugzilla site, but until they get this issue fixed, I want to go back to Firefox 31.
-
How can I tell what version of Thunderbird I have?
UH... How can I tell what version of Thunderbird I have? That's all.
-
Satellite A100-TA2 PSAA8C-TA202C has internal BT?
I remember when buying laptop he had supposedly BTDoes anyone know if my laptop has built-in modules of bt / radio? Satellite A100-TA2 system unitModel PSAA8C-TA202C number Also, anyone know what is the model of "Toshiba" of this laptop... A100-TA2 i
-
Why do I have 2 routers on nerwork card with a switch, when a router is mine?
network map says that there is another router on my computer with a card switch.nework reading order my computer then a dlink router that is not mine then a switch then my router.the cisco router which is not mine said d-link international pte limite
-
How to upgrade the BIOS? I don't know what BIOS. The computer has Vista.Also, what CD to use 32-bit or 64?