WRT600N: How to switch mode to 'Bridge' to 'router '?

Similar Questions

• Switching mode of EPC 3925 / router E3000 speed 20% loss

  my setup is EPC 3925 Switch mode - E3000 router mode

  my ISP speed is 200 Mbps I only have 160 MB/s maximum and is not stable

  When I use the EPC 3925 I get 200 Mbps

  can someone explain why this happens

  takwansani wrote:

  Thanks Meegosh and nerD_sayer for answers

  one last question what happens if ask my ISP to swap the 3925 to a modem router as the 3208

  I gain speed?

  Yes. It is better to have just a modem ordinary to avoid double NAT issues as well as port easier opening if it is necessary to do so.

• 3750 x how many switches can be stacked power

  Hello

  I have problem with my power on my X 3750 switch stack.

  Error: Stacking of power does not work properly & here is the error I get. Please let me know how may switches support to be able to overlay.

  detail of battery power #sh
  Power battery battery battery Total Rsvd Alloc unused Num Num
  The Mode name topology Pwr (W) (W) Pwr Pwr (W) (W) Pwr SW PS
  --------------------  ------  -------  ------  ------  ------  ------  ---  ---
  Ring PowerStack-3 SP - 2800 1908 892 0 4 8 ch
  Stndaln PowerStack-4 SP - PS 700 477 223 0 1 2

  Name of battery power: Powerstack-3
  Stacking mode: power-sharing
  Battery topology: Ring
  Switch 1:
  Power budget: 223
  Allocated power: 223
  Low-value priority port: 22
  The priority value high port: 13
  Change the priority value: 4
  Port 1 status: connected
  2 port State: connected
  Neighbor on port 1: 5 Switch - acf2.c5db.2a80
  Neighbor on port 2: switch 2 - 885a.922c.ce80

  Switch 2:
  Power budget: 223
  Allocated power: 223
  Low port priority value: 20
  The priority value high port: 11
  Change the priority value: 2
  Port 1 status: connected
  2 port State: connected
  Neighbor on port 1: switch 1 - b0fa.eb82.1880
  Neighbor on port 2: 3 switch - 30f7.0d43.7d00

  Switch 5:
  Power budget: 223
  Allocated power: 223
  Low-value priority port: 21
  The priority value high port: 20
  Change the priority value: 3
  1 table of port: Shut
  2 port State: connected
  Neighbor on port 1: 0000.0000.0000
  Neighbor on port 2: switch 1 - b0fa.eb82.1880

  Switch 3:
  Power budget: 223
  Allocated power: 223
  Low port priority value: 19
  The priority value high port: 10
  Change the priority value: 1
  Port 1 status: connected
  State of the port 2: close
  Neighbor on port 1: switch 2 - 885a.922c.ce80
  Neighbor on port 2: 0000.0000.0000

  Name of battery power: Powerstack-4
  Stacking mode: power-sharing
  Topology of the battery: autonomous
  Switch 4:
  Power budget: 223
  Allocated power: 223
  Low-value priority port: 22
  The priority value high port: 13
  Change the priority value: 4
  Port 1 status: not connected
  2 port State: not connected
  Neighbor on port 1: 0000.0000.0000
  Neighbor on port 2: 0000.0000.0000

  #sh worm
  Cisco IOS software, software of C3750E (C3750E-UNIVERSALK9-M), Version 15.0 (2) SE8, RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2015 by Cisco Systems, Inc.
  Updated Thursday 13 May 15 22:53 by prod_rel_team

  ROM: Bootstrap program is C3750E boot loader
  BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M), Version 12.2 (53r) SE2, RELEASE SOFTWARE (fc1)

  The availability of DOP-MYS-DR-STACK-A is 4 weeks, 4 days, 18 hours, 38 minutes
  System to regain the power ROM
  System restarted at 18:43:14 IST Wed Sep 30 2015
  System image file is "flash: c3750e-universalk9 - mz.150 - 2.SE8.bin.

  This product contains cryptographic features and is under the United States
  States and local laws governing the import, export, transfer and
  use. Delivery of Cisco cryptographic products does not imply
  third party approval to import, export, distribute or use encryption.
  Importers, exporters, distributors and users are responsible for
  compliance with U.S. laws and local countries. By using this product you
  agree to comply with the regulations and laws in force. If you are unable
  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:
  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at
  [email protected] / * /.

  License level: ipbase
  License type: Permanent
  Then reload license level: ipbase

  processor of WS-C3750X-48 (PowerPC405) Cisco (revision A0) with 262144 K bytes of memory.
  Card processor ID FDO1702H1H2
  Last reset of tension
  3 virtual Ethernet interfaces
  1 interface FastEthernet
  260 gigabit Ethernet interfaces
  10 ten interfaces Ethernet Gigabit
  Password recovery mechanism is activated.

  512K bytes of memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: B0:FA:EB:82:18:80
  Number of the motherboard: 12552-73-08
  Motherboard serial number: FDO17021Z17
  Revision number of the model: A0
  Motherboard revision number: A0
  Model number: WS-C3750X-48 t-S
  Daughter numbered card: 800-32727-03
  Daughterboard serial number: FDO17021U80
  System serial number: FDO1702H1H2
  Top Assembly part number: 800-31326-07
  Top of page revision number of the Assembly: B0
  ID version: V04
  CLEI Code number: COMJT00ARD
  Material Board revision number: 0x04

  SW Version SW Image model switch ports
  ------ ----- -----              ----------            ----------
  * 1 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M
  2 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M
  3 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M
  4 SE8 WS-C3750X-48 15.0 (2) 54 C3750E-UNIVERSALK9-M
  5 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M

  Switch 02
  ---------
  Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
  Basic Ethernet MAC address: 88:5 A: 92:2 C: CE:80
  Number of the motherboard: 73-12552-11
  Motherboard serial number: FDO1737008G
  Revision number of the model: A0
  Motherboard revision number: A0
  Model number: WS-C3750X-48 t-S
  System serial number: FDO1737R034
  Top of page Assembly part number: 800-31326-09
  Top of page revision number of the Assembly: A0
  Version ID: V06
  CLEI Code number: 466496
  License level: ipbase
  License type: Permanent
  Next time you restart level license: ipbase

  Switch 03
  ---------
  Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
  Basic Ethernet MAC address: 30:F7:0 D: 43:7 D: 00
  Number of the motherboard: 73-12552-06
  Motherboard serial number: FDO1627085Z
  Revision number of the model: A0
  Motherboard revision number: A0
  Model number: WS-C3750X-48 t-S
  Daughter numbered card: 800-32727-03
  Daughterboard serial number: FDO16511JJ6
  System serial number: FDO1627Z1J5
  Top of page Assembly part number: 800-31326-03
  Top of page revision number of the Assembly: B0
  Version ID: V03
  CLEI Code number: COMJT00ARC
  License level: ipbase
  License type: Permanent
  Next time you restart level license: ipbase

  Switch 04
  ---------
  Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
  Basic Ethernet MAC address: 6 c: 20:56:C6:BC:00
  Number of the motherboard: 73-12552-06
  Motherboard serial number: FDO16371BCZ
  Revision number of the model: A0
  Motherboard revision number: A0
  Model number: WS-C3750X-48 t-S
  Daughter numbered card: 800-32727-03
  Daughterboard serial number: FDO170105GN
  System serial number: FDO1637P2CK
  Top of page Assembly part number: 800-31326-03
  Top of page revision number of the Assembly: B0
  Version ID: V03
  CLEI Code number: COMJT00ARC
  License level: ipbase
  License type: Permanent
  Next time you restart level license: ipbase

  Switch 05
  ---------
  Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
  Basic Ethernet MAC address: AC:F2:C5:DB:2 A: 80
  Number of the motherboard: 12552-73-08
  Motherboard serial number: FDO16432HHP
  Revision number of the model: A0
  Motherboard revision number: A0
  Model number: WS-C3750X-48 t-S
  Daughter numbered card: 800-32727-03
  Daughterboard serial number: FDO17021U2V
  System serial number: FDO1644R0L5
  Top of page Assembly part number: 800-31326-07
  Top of page revision number of the Assembly: B0
  ID version: V04
  CLEI Code number: COMJT00ARD
  License level: ipbase
  License type: Permanent
  Next time you restart level license: ipbase

  Configuration register is 0xF

  DOP-MYS-DR-STACK-A #.

  If you have more than 4, then divide into 2 batteries for power purposes; You can stack yet all 5 or 6 for network management purposes.

• MS NLB Multicast configuration on Cisco Bladecenter switches mode

  We seek to MS NLB Multicast configuration on Cisco Bladecenter switches mode. We are adding static ARP and CAM entries for each port on the switches kernel that

  the Bladecenters are connected to, or just the port of the virtual machine arrives at

  push traffic at this time here? If we add it to a single port,

  How vmotion will work... because it seems that we have to manually

  transfer the arp from one port to the other entry.

  We add the static ARP entry to the entire Cisco switch. If you can VMotion VMs NLB to another host that is physically connected to another switch, then this switch have thus added ARP entry. We have not tested the configuration only on the specified ports. But if you do, make sure that you include all the ports connected to the physical switch (if for DS you have four natachasery configured in a vSwitch...).

  Here's a guide to how we have configured it several times in our society.

  http://www.VI-tips.com/2009/04/NLB-in-VMware.html

• How to switch to safari 9.1 without internet connection

  I've recently upgraded to El Capitan on my 2009 mac. Fine, except that now, I find my version of safari (6.6) is not compatible with El Capitan and I have no internet connection. How to switch to safari 9.1 without being able to download it? Can I get a disk with on or something?

  Safari is upgraded when you upgrade your system. There is no installer for stand-alone for Safari. If you run El Capitan your Safari should be version 9.1.2. Otherwise apply the OS X Combo Update 10.11.6.

  The Combo update is a complete installation, as opposed to an incremental "delta" update, so you have to overwrite all files are damaged or missing. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.

  https://support.Apple.com/downloads/MacOS

• How to switch to Firefox 7 after installing Firefox 8?

  IAM having problems with access to ancestry.com.au since I installed Firefox 8. I checked with the ancestors, and they said that they are not configured to work with Firefox 8. They work well with Firefox 7. How to switch to Firefox 7. I'm very tired of having to enter all the ID and password everywhere wherever I'm going while navigation or go to my accounts. I'm too frustrated to continue with Firefox 8. Please give me simple instructions on how to return to Firefox 7.

  You can get Firefox here 7

  • http://releases.mozilla.org/pub/mozilla.org/firefox/releases/7.0.1/Win32/en-US/Firefox%20Setup%207.0.1.exe

• How to enable "mode Hibernate for windows 10.

  Hello

  How to enable "mode Hibernate for windows 10.

  Thank you very much

  Unit: Satellite Pro R50 - B - 10 G

  Hello

  Mode what do you mean exactly: standby mode standby or Hibernation or hybrid?
  You can enable or disable hibernation using the invoked command: powercfg
  start cmd.exe in admin mode!

  Activate the Hibernate in Windows 10: the command prompt enter: powercfg-h on

  Disable the Hibernate in Windows 10: enter in the command line type: powercfg-h off

• How to switch between Intel and ATI GPU on Satellite L50 - B

  Hello

  I bought a L50 - B - 1LR PSKTAE Satellite.
  Is there a graphics card Intel on the motherboard, but also a second for better 3D AMD Radeon.
  Now, I plugged on a second screen on the HDMI output, but still using the Intel graphics card.
  How can I change this?

  I made a button in the radeon software which says that when I start the sketchup program that he would take the graphics card from AMD. But it's still the Intel graphics adapter.

  Thank you

  Bart Slosse

  {quote} How can I change this? {quote}

  You can configure the unique application of each graphics chip.
  Please check this thread how to switch to external ATI GPU
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=78781

  Some nice youtube videos also show detailed step by step instructions how to:
  https://www.YouTube.com/watch?v=DCh9Eob0mNY

• Yoga 2 Pro: randomly switches modes even when closed and the peripheral use

  I recently bought a Yoga 2 Pro, and I love it, except for an extremely annoying issue.

  It toggles randomly modes on me without moving the screen. I have not been able to develop a model for switching, it seems to be completely random. This morning I use this connected to a monitor of periperal via HDMI with the lid closed, and it was fine for about an hour and then started switching of the modes - tablet, back to laptop, the marquee, stand up, back to laptop, for tent...

  One of the benefits of its use with peripheral keyboard are the other modes don't disable the keyboard, but it is to randomly change the orientation of the screen. When I used it on its own without the devices, I can be typing away in the configuration of the laptop and all of a sudden it switches modes and the laptop is disabled.

  Sometimes, it is very well for hours and then will be randomly 10 times in 30 seconds.

  I know that I can turn on the rotation lock, but I just that it works correctly. He has been behaving in this way since the first night I bought it.

  All my windows updates are current and I reinstalled the drivers of transition of Yoga.

  Help, please. I need my computer for United work and cannot have a malfunction all the time and also cannot afford to lose if, during a period of time to have it fixed.

  I think it's finally fixed, but he forced me to return the unit for repair.

  Repair Center took two will solve the problem, but the ultimate fix seems to have required the replacement of the LCD: I guess there is some kind of sensor attached to the LCD unit. They replaced the motherboard and reconfigured the unit before replacing the LCD screen, so I can't be certain that he was not also a problem with the motherboard.

  So I guess I would recommend all those who encounter this issue gets their unit in a Service Center for repair before the warranty runs out. The warranty repair process wasn't as smooth as I would have liked, but ultimately it looks like my machine works fine now, and I don't think that any amount of waiting for updates of pilot would have set it.

• How to switch on and Switch Off LED using lab view

  How to switch on and Switch Off LED using lab view, I need to Switch on and off material LED, not the soft LED.

  I need to know the different ways to Switch On and Off the LED

  Hello

  I need to control the LED on my laptop which is to have labview, kindly tell the different ways that my laptop a serial port, is possible to control using that.

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• How to switch to Hotmail which is 10 x faster?

  How to switch to Hotmail which is 10 x faster?

  Go to Outlook and use it. You can transfer you Hotmail to the new site.

• How to switch my Acer Aspire One ZG5 model of Win XP to W7?

  How to switch my Acer Aspire One ZG5 model (model 2008) from Win XP to W7?

  I have 1.5 GB of RAM and 160 GB HD. What version of W7 can agree?

  You will appreciate any help/advice - thanks.

  It is clear looking for throough this forum helps a lot of people - there are several questions that no one has offered any sort of a response/answer - it seems hardly useful.

  In any case, I answered my own question: I just connected a USB DVD drive and ran the drive of W7 patch and everything was fine. He did take a lot of time for all updates to load, but there is no real problems. W7 works very well with 1.5 GB of memory.

  Good day!

• How to switch web browser and which one should I use

  How to switch web browser and which one should I use thanks

  FireFox.
  http://www.Mozilla.org/en-us/Firefox/new/

• HP Photo smart 7520: how to switch color after setting the black HP7520 only

  How to switch color after setting printer black HP7520 only

  Hi junosa,

  I'm glad to hear that you finally found the color prints you need.

  When you change the printer setting with the method, you suggested that he change the parameters by default for the printer all of a work are printed with these settings unless you make changes just before printing. If you what to adjust the setting before each print job uses the method that I provided in my first post answer. That's all what you find easiest.

  With regard to the button apply grayed, apply the button becomes clickable when there was only a modified setting that needs to be saved.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.