WRVS4400N serving gig switch only

Similar Questions

• We can make print under Windows 7 server in a domain, or if it must be a server operating system only.

  We can make print under Windows 7 server in a domain, or if it must be a server operating system only.

  I wanted to say that I want to install the print server, so I can install it on Windows 7 it is necessary a server operating system only, (it's in a field)
  I would like to know if it's a domain model can use us it or if it is a model of group work can we use Windows 7 or Windows Server OS?

  Hi Zahed,

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Certificate expired on a server that has only the client VMware and VMware workstation

  Our scanners detected security certificate expired vmware on a server. The only products currently running on this server are VMware workstation and the vSphere client. I looked in all the installed certificates and their lack of vmware. When I open a web browser and go to the IP address of servers using port 443 I get a message of invalid certificate and look a certificate it shows expired recently, and was published by VMware. Where can I find this certificate and what is used to indicated the products installed on this system?

  The certificate was for workstation server configurations (connection sharing VMs/Remote). Just disabled the sharing feature because it is not used.

  Find the certificate in the program data-file VMware. Could not find information on renewal, only how to replace it.

• How to restrict Internet access by using the RADIUS server via switch Catalyst 3560

  Dear all,

  I need a configuration using any. I have a small network of 15 users a 3560, which is in turn connected to a router ISR 2811. Interface fastethernet 0/24 switch 3560 I intend to connect to a unix based server RADIUS. ISP is connected on the opposite side of the 2811 to the fa0/0 interface.

  I want to make is that if someone among the 15 users tries to access the internet, they must be validated in the RADIUS server by their pre-configured user credentials. (I'm going to store 15 user credentials here). If someone else tries to connect (except those 15) he or she should be denied internet access.

  The RADIUS server will be having a login page to type the name of user and password.

  Please guide based on what commands I should inject into the 3560 or what specifically, I need to have to run this task.

  Thanks in advance!

  Samrat.

  I only did this in a very long time, but you probably want to do is activate the web authentication.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3560/software/release/12-2_52_se/configuration/guide/3560scg/swwebauth.html

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• DKIM GIS missing IOS using Server 5 was only messages

  Hello

  I was testing my new Setup DKIM (thanks the kind people at the counter of topic for the implementation of DomainKeys/DKIM on OS x 10.8.x Mountain Lion server...) and I see the DKIM signature on some posts and not others when I get emails from my server to gmail.  I narrowed down it to messages IOS is native, but only those of my own OS X Server 5 accounts.

  Signed examples: (as seen on a gmail account (gmailacc1) using OS X mail indicate headings)

  gmailacc2 to gmailacc1 of MACBOOK

  gmailacc2 to gmailacc1 of the iPhone

  Example UNSIGNED: (as seen on gmail account (gmailacc1) using OS X mail indicate headings)

  serveracc1 to iPhone1 gmailacc1

  serveracc2 to iPhone1 gmailacc1

  In short, he has only signed DKIM missing since iOS devices, but only when from accounts that my server hosts.

  Configurations:

  iPhone1 on 9.2

  MacBook is on OS X El Capitan 10.11.2

  Server is version 5.0.15

  Server operating system is OS X El Capitan 10.11.2

  Differences in header: (I see that DKIM still does not quite right, but that shouldn't be causing this discrepancy-square Advisor if you disagree)

  Next two lines are only in the header of the macbook is from:

  DKIM signature: v = 1; a = rsa-sha256; c = relaxed/simple; d = example.com; h =

  x-mailer: mime-version: date: date: message-id: subject: topic

  : content-transfer-encoding: content-type: content-type: from: to

  : received: received; s = default; t = 1451843424; x = 1453657825; BH = vN

  aAS12lrLmuVbNt9e3bDfxq/890NGY77wOelrIV0cI =; b = LSGPeIY + vQvOHpOJk3

  ZwP8L5NkTgKtWKWrdRK8bBrcx90QV5 + MkghM59IfHH5tD0M7OQ5Q9npCDj + rp7R7

  ZKEdLGm99Zy1Yj9c6swliTZ7MRyq4lZDUaxboZKoTvs9LCg63BsMQejgrQihsmS3

  W00In + uQUEGyflFMmqRNYI/xo =

  DKIM = fail [email protected];

  Besides timestamp, sequence/CR, CR/LF and message of the differences there are a few set lines to update the: (seem insignificant for me)

  iPhone:

  Received: from [192.168.1.2] (server.example.com [123.456.789.123])

  by server.example.com (Postfix) with ESMTPSA C5D641D5A69C id

  for [email protected]>; Sunday, January 3, 2016 10:50:24-0700 (MST)

  MIME-Version: 1.0 (1.0)

  X - Mailer: iPhone Mail (13 c 75)

  MacBook:

  Received: from [192.168.1.12] (unknown [192.168.1.12])

  by server.example.com (Postfix) with ESMTPSA E20431D5A6A6 id

  for [email protected]>; Sunday, January 3, 2016 10:50:24-0700 (MST)

  MIME-Version: 1.0 (Mac OS X Mail 9.2 \(3112\))

  X-Mailer: Apple Mail (2.3112)

  Any help would be greatly appreciated, thank you.

  Hi - I made recently of DKIM on my recently installed OS X 10.11.2 set-up + installation OS X Server 5.0.15. Was on Mavericks + Server 3.x but had done before clean install.

  I found the site with information for the installation of DKIM I followed, with some minor changes - and it worked directly at the exit.

  As you mentioned that you found a different result from an iOS device to a Mac I just tested my iPhone (had done with Mac during Setup) and it went very well.

  There is actually a website, you can send an email and they send back you an email with a very detailed analysis. Here is the summary they send, it's the result of my test of the iPhone.

  Port25 Solutions, Inc. team.

  ==========================================================

  Summary of results

  ==========================================================

  The SPF check: pass

  DomainKeys check: neutral

  DKIM check: pass

  The sender ID check: pass

  SpamAssassin check: ham

  Send an email to: [email protected] and see what you get in return. I can post a tutorial of how I did my configuration if necessary. Would be tomorrow.

  Let us know how you go with the test.

• Connection to the internet with the 8 port Gig switch

  Hey you all the benefits.  I have 6 desktop computers in my house right now, and each of them should be wired.  I thought I'd get the EG008W 8 port 10/100/1000 switch, but before I do that, I need to know if I can run the cable my modem Cat5 cable to a port on the switch uplink to provide access to each 6 workstations in my home?

  Thank you!!

  The WRT610N is not an uplink port. It has a port from the internet. As a router, it offers two different interfaces, one for the internet side and one for the side LAN (the side LAN is connected to a switch 4 ports). A router separates the two sides and routes traffic between them.

  An ethernet switch extends an ethernet network. It is not a router. It doesn't have an internet port or similar. It does not separate anything. He joins all devices connected on the same LAN.

  Older ethernet switches had uplink ports to post a link with other switches. This is because older switches do not have ports to detection automatic, which means that they are not able to know you used a cross-cable or right to connect. With the new switches you don't have to worry about it more. They configure each port correctly some cable you are using and any other device you connect to. All the switch ports are the same.

  You can get the EG switch that you mentioned before or any other ethernet switch to expand the number of ports wired in your LAN. One of the ports on the switch simply connecting to a port LAN of the WRT, and you can use all the remaining ports on the WRT and the switch. Do not connect the switch ethernet directly to your modem. Only the WRT.

• 4 giga showing only 2.99 usable in win 7 64 bit

  X 60 1706 - wp6

  using win7 64-bit

  Once the upgrade to 2x2giga pc2-6400 cl6 bios shows 4 giga

  victory show 4 GB but only 2.99 GB usable

  resource monitor shows

  reserved 1034 MB equipment

  670 mb in use

  61 mb modified

  stanby 263 MB

  1840 MB of free space

  I was wondering, why is it not show the 4 GB of ram?

  Hi elad1!

  Check this thread for your answer.

• Inter vlan routing on a Cisco SF 300-24 port switch only no internet except when scanning with wireshark

  Hello

  I'm get inter vlan routing to work on a 300-24 ports switch DF.    I have a network of business existing on 192.168.111.0 and want to create a vlan on 192.168.1.1 which can talk to 192.168.111.0.    I activated the layer 3 routing on the switch through the console and also provided ip routing commands. I have the following VIRTUAL networks:

  Vlan1 - default 192.168.111.0

  VLAN2 - 192.168.1.0

  I turned on DNS and provided my two servers DNS 192.168.111.82 & 192.168.111.212.

  I updated the VLAN1 interface 192.168.111.217 and VLAN2 interface 192.168.1.1.

  The FE1 - FE15 ports are access ports and assigned to VLAN1 (unidentified)

  FE16 - FE24 ports are access ports and assigned to VLAN2 (unidentified)

  I put a default route for the switch to 0.0.0.0 0.0.0.0 192.168.111.254 (router Draytek 2600). I have connected a computer (A) at the port of VLAN1 FE3 and a computer (B) to VLAN2 FE16 port.   I put its IP address and computer default gateway has to 192.168.111.217 to 192.168.111.94.    I updated computer B default gateway 192.168.1.1 and 192.168.1.2 IP.

  Computer A has access to the Mdaemon Server files via the network grows but no internet (cannot ping google) and can ping computer B and RDP on computer B.

  Computer B can ping computer A and RDP on A computer but do not have access to the company network i.e. MDaemon, file server etc.   It can also access the internet.

  The console I can ping www.google.co.uk and all the ip addresses in the network of the company i.e. 192.168.111.82 (DNS server).   I do not understand what I am doing wrong and have been banging my head for staretd a few days a new job and desperately need to work so any help would be greatly appreciated

  If I have computer scanner a wireshark wirh internet starts working wheird!

  Show the configuration below:

  switch7c0a71 #show run

  database of VLAN

  VLAN 2

  output

  Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___

  Add a voice vlan Yes-table 00036 b Cisco_phone___

  Add a voice vlan Yes-table 00096e Avaya___

  Add a voice vlan Yes-table 000fe2 H3C_Aolynk___

  Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone

  Add a voice vlan Yes-table 00d01e Pingtel_phone___

  VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075

  Add a voice vlan Yes-table 00e0bb 3Com_phone___

  interface vlan 2

  IP 192.168.1.1 255.255.255.0

  output

  interface vlan 1

  IP 192.168.111.217 255.255.255.0

  output

  IP route 0.0.0.0 0.0.0.0 192.168.111.254

  interface vlan 1

  no ip address dhcp

  output

  Hello interface range vlan 1

  hostname switch7c0a71

  No complexity of passwords allow

  No server snmp Server

  interface fastethernet1

  switchport mode access

  output

  interface fastethernet2

  switchport mode access

  output

  interface fastethernet3

  switchport mode access

  output

  interface fastethernet4

  switchport mode access

  output

  interface fastethernet5

  switchport mode access

  output

  fastethernet6 interface

  switchport mode access

  output

  interface fastethernet7

  switchport mode access

  output

  interface fastethernet8

  switchport mode access

  output

  interface fastethernet9

  switchport mode access

  output

  interface fastethernet10

  switchport mode access

  output

  interface fastethernet11

  switchport mode access

  output

  interface fastethernet12

  switchport mode access

  output

  interface fastethernet13

  switchport mode access

  output

  interface fastethernet14

  switchport mode access

  output

  interface fastethernet15

  switchport mode access

  output

  interface fastethernet16

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet17

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet18

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet19

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet20

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet21

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet22

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet23

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface fastethernet24

  switchport mode general

  VLAN allowed switchport General add 2 unidentified

  output

  interface vlan 2

  name of development

  output

  Hi Richard,

  43 - permit Protocol: any / all

  42 - Protocol deny EVERYTHING 192.168.2.0 0.0.0.255-> to 192.168.111.0 0.0.0.255

  41 - Protocol to deny ALL 192.168.111.0 0.0.0.255-> to 192.168.2.0 0.0.0.255

  40 allow the RDP Protocol TO ALL

  etc.

  To block everything, including MSSQL, with the exception of the RDP and other ports that you defined above.  The other defined are simply not the RDP Protocol and service work?

  Richard, do note useful messages and identify the right answers.

  Best,

  David

• DateTime liquid switch only works on some browser form input fields

  I have a form of agreement where I would like to have the current date is displayed only (readonly) in the form of entry.  This will display the date perfectly well a range of browsers and OS but my client always reports that the form field displays the date + time (22-June-2015-12:00). Apparently, it still shows 12:00 for the time. I was unable to reproduce it in any of my tests with several browsers and operating systems.

  That's what I wrote to add the date:

  {% assign dateVariable = {{globals.site.dateNow | date}} %}}

  < b >

  < td >

  < label for = "CAT_Custom_19994415" > Date of acceptance < span class = "req" > * </span > < / label > < br >

  < input type = "text" name = "CAT_Custom_19994415" id = "CAT_Custom_19994415" class = "cat_textbox" readonly = "readonly" = value "{{dateVariable |}}" {{date: '%d - MMMM-yyyy'-}} ">"

  < table >

  < /tr >

  Must I add another filter to indicate to the server does not add a time in there? Or maybe add some Javascript for him say look for a while and remove it?

  Any help would be much appreciated.

  It's weird.

  It will not be something to do with the browser because liquid is script server-side and today's date is server only side not the client side too.

  | date displays only the date but not the time, and I did not add time.

  I do not notice on your input field you after the aaaa: a dashboard - that needs to go just in case where but I don't think it would be. You need javascript.

  Remote connect to your computer for customers to watch what they see, never take a customer what they say on face value.

• Client listeners who call Server on fields only listeners take account of changes made on the event field

  Hello

  I have this sample application:

  1. I have a view object with a view criteria added to my data model of the app module.
  2. Then, in a page fragment /, I created a table based on this view object, and drag-and - drop operation ExecuteWithParam binds variables to the page as input fields of text with clientComponent = 'true '.
  3. Next, I added a listener client in each of the fields of type keyPress entry to call the following JavaScript method whenever the user presses the Enter key:

  function handleEnterEvent(evt) {
                        var _keyCode = evt.getKeyCode();
                        //check for Enter Key
                        if (_keyCode == AdfKeyStroke.ENTER_KEY ){
                            var comp = evt.getSource();
                            AdfCustomEvent.queue(comp, "EnterEvent", {}, false);
                            evt.cancel();
                        }
                     }
  

  4. then I added a server listener to these same "EnterEvent" type text input fields to call a method in my grain of support, that basically runs the OperationBinding ExecuteWithParam programmatically.

  The problem:

  1. I type "123" in my it1 text entry field and press the Enter key. The operation is performed and the results of the table are filtered as expected with the view criteria.
  2. I then clear the value in my it1, change the cursor in my it2 of text entry (without pressing enter), type 'Hello' and press the Enter key. The operation is performed, but the results are incorrect - the results indicate values as if the value "123" was always filled the it1 (and respective value of binding).
  3. If I do the cursor resume my cleared it1 text input and press the Enter button, the results are now correct...

  It's like bind values are updated only when the client event is triggered in this specific field... How should it be properly implemented? What Miss me?

  Thanks in advance. Kind regards

  -Tiago Vidigal

  Try to set autoSubmit = "true" for the text input element

  Timo

• First previews Dreamweaver Server Side includes only (SSI)

  CC of Dreamweaver and 2014 preview the first Server Side includes (SSI) only, even if the extension from Adobe is installed (using the extension SSI in Dreamweaver to create page headers |) Adobe Developer Connection)

  How can I configure Dreamweaver to preview SSI multiple (more than one)?

  Example Code:

  [an error occurred while processing the directive][an error occurred while processing the directive]

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > Untitled Document < /title >

  < / head >

  < body >

  <!-virtual = "" / content.shtml #include "->"

  <!-virtual = "" / content2.shtml #include "->"

  < / body >

  < / html >

  The above code will preview the text in 'Content.shtml', but will not display the text in 'content2.shtml '.

  For troubleshooting purposes, I reduced the content in each file to only basic text lines.

  Please notify. Thank you.

  ---------------------------------------------

  Update:

  Dreamweaver Live View will display all of the side server. However the "creation Mode" and "Preview in browser" will only show a ssi.

  Preferably following settings are enabled:

  -Preview using temporary file

  -Display the contents of the included file

  ---------------------------------------------

  Update 2:

  I discovered that SSI have been removed from the interface of Dreamweaver, deducted from this article: a look at the Dreamweaver CC modernized: Adobe Dreamweaver Team Blog. If Server Side Includes are removed, can they be added using the server behavior extension?

  ---------------------------------------------

  The problem is solved in Dreamweaver 20141

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• SERVER NOT FOUND only on a specific web site.

  Hello

  I'm trying to fix a problem with a system of Golf GPS of colleagues called Sonocaddie, but whenever I try to view the web site of the company I get the message "SERVER not FOUND" that I can go to other websites with no problems.

  Help please!

  Thank you

  MS

  Time to contact the developer.  We have no knowledge of their software.

• Mail server Simulator works only not with the blackberry Simulator

  Hello

  I'm trying to connect the ESS for the BB Simulator (addin eclipse) so I could simulate interaction email.

  Accroding to the documentation, I need start the BB and the ESS simuilator and select stand-alone mode. But as soon as I click on the launch button ESS crashes...

  When I confugre the Server POP3 details and choose "connected mode", it seems that the ESS connects to the server I see the emails in the account in the java console, but I can't send or receive e-mails on the blackberry.

  Can someone please advise?

  Thank you

  Amir.

  See this article.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/800982/support...