WS FTP and changes to the push model

Similar Questions

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

  Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

  Hello

  You can manage this through the "Manage scene numbers" option in the menu 'Production '.

  There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

• FTP and updates to the site

  Hello

  Just a general question about updating my published site and which files must be uploaded via FTP. I made changes to the various pages of the Web site.

  For example, I changed the order of my thumbnails on the homepage. I do not see a problem when I saw the site prior to publication. However, when I go out of my browser it does not resemble what I expect. I cleared the cache before viewing.

  Thank you!

  As integrated security, I found that when any change on the site, I have re-upload EVERYTHING - but then again, my sites are not very large. I just hit upload and overwrite and go for coffee.

  However, if your site is too big to reload each time, I re-charge: thepageinquestion.html, thepageinquestion.css , and all and all the image files associated with the page again and the index.html and muse_manifest.xml for good measure. In my view, who should do it.

  If you change several pages, it's long but fool-proof, just to re - load it all. There are many questions about the forums on sites not display and behave properly, only for the poster discover that they do not have to re - load was a part of the exported data Muse / documents.

• Recycle bin corrupted and change of the icons

  I ran the fix - it program, and she did not give me an answer for these 2 problems. I am running XP Home SP3 on an old Dell desktop computer to 6 year

  Hi JohnSlife,

  ·         Did you do changes on the computer before the show?

  You can see the article below that should help you to fix the corrupt trash.

  Error message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...

  http://support.Microsoft.com/kb/297760

  I hope this helps.

• Movie Maker grab and changed all the desktop icons for Movie Maker and all isopening Movie Maker

  I have a big problem, I have Windows 7 and I made a film using still photos on my computer now all binding, Movie Maker says that Movie Maker does not support the selected file type, 3 first films went great, but obviously I hit the wrong key, it changed all the icons on my desktop to display the icon of Movie Maker and each icon now opens on seizures to the top of Movie Maker, I tried every troubleshooting and restoration utility, but nothing changes; When I go to Movie Maker hand opens as if she's trying to do something. Can you give me any advice, would be much appreciated I can't do a thing right now.

  VI

  Have you tried to do a system restore
  Safe mode for one hour before the beginning of the question?

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• Slideshows of muse reorganize after their reorganization and change of the order in the layers.

  I also move them around and change the diapers. The thumbnails are how I want them ordered, but when I click on the first and begin to click, the order becomes messed up.

  Hi Meghan,

  Can you please try to re - organize the slide show again or test a new slide show?

  If possible, please share the file (by downloading and sharing the link in a private message) for assistance.

  Kind regards

  Akshay

• Changes to the distribution model weekly planning after deployment/creat

  Hi all
  
  Hope someone can help me answer this request:
  
  I have create a planning application. I've set up currencies, distributions weekly patterns etc and deploy the application.
  
  Can I now go ahead and change the weekly distribution of 4-4-5-5-4-4
  
  Thanks in advance

  Hi, you cannot change distribution weeks via interface after the deployment of the application. Regardless, it is classic or EPMA app.
  But you can do it via SQL directly in the planning system. And then you must restart the web planning service

  To be sure to see also Re: Distribution planning

  PS. funny that it is one of the issue of the review

• Search for and change all the bug after his conversion to Authorware 7

  A few months ago, we went from Authorware 6.5 to Authorware 7

  I have problems with a 6.5 converted to Authorware 7.0 file. I tried to convert the file again after the first compact 6.5 file. I tried it again after the Authorware 7.02 update, but still the same problem.

  The bug affects "search".

  If I get " : " and replace everything by ": " 

  i.e. get cites two spaces OR and replace by quote single space OR

  There is no problem of search and replace in 6.5, but version 7 search text 16 characters to the right of the correct text, it is not change because it would produce a syntax error.

  Using 'Find in calculation' correctly identifies the first occurrence of

  quote two spaces OR

  Another example, if I get a variable named Mode, the first, several items are correctly identified, but ultimately it incorrectly highlights text.

  I tried in both XP & Vista, with similar results. Obviously, editing is a nightmare, because of global change, I now by clicking next several times, check that the correct text has been detected before the election change the code.

  I copied and pasted the calculation containing cites two spaces OR, a spreadsheet Excel and got the Ascii code all 9000 characters. The lowest recorded value is 32, half, I expect a non-display less than 32 character could be the cause of the error.

  Could find no mention of this error on the forum, I contacted Adobe. They kept me 15 days pending then lift the query at a higher level. For two months, they have ignored every week queries asking what was going on.

  This was their response, if any.

  Monday, November 30, 2009 1:34:07 AM PST
  Hello Tom,
  
  Thank you for providing your information.
  
  We wish to inform you that there is something on the text in the
  calculation, as saved from Authorware 6.5, which is not Authorware 7
  as. The only way I found to stop this is to cut and rebonding of
  calculation script in Authorware 7. You may need to check that
  the find command is highlighted before you apply the changes, and when he sees a
  problem like that, you have to copy / paste for this calculation. We
  were afraid of us can't see another way to stop this, and like Authorware's
  is not developed, there is no engineering team we can point to.
  
  For additional assistance, please contact us at the Support Web Portal:
  www.Adobe.com/support or you can use the following on support options
  the Adobe Web site:
  
  * The user-to-User Forums where you can enter your problem or
  desire to see if another user of Adobe can offer advice. Access to this
  resource address www.adobeforums.com.
  
  * The Support Knowledgebase, which contains solutions to problems
  that occur on the assumption of the operating systems (<>) and products of <>).
  
  Thank you Adobe chossing.
  
  Abhishek

  I have never been a fan of Adobe, even before they took from Macromedia and abandoned Authorware. Their terrible support strengthens my opinion of them

  I asked Adobe if it is possible to convert in 6.5 (but no answer).

  Any suggestions?

  Looks like you have found the solution that could make the search and replace works for good. "Diving code", I mentioned at the top of the queue showme is a calc that is attached to the card. Open one of the showme files and double-click the = at the top left of the map at the top of the page. You can only paste a calc icon in your file. I'm not sure that your solution works for every situation... for instance if you replace the SPACE BACK by RETURN, then he could not correct the problem, if there are lines with several spaces at the end... Here again - maybe using GetCalc and SetCalc will be Authorware re - compile the Calc and fix the problems of every search and replace.

  Mike

• Change to the underlying model does not update display AdvancedDataGrid

  I'm working on a project of Cairngorm MVC. A part of the application has an AdvancedDataGrid ("ADG") with two levels of available drilling - we will call the highest level 'States' and the 'cities' of second level. The default is 'States' only - the top-level nodes are closed. When I add a new 'State' to the underlying model, it appears correctly in the ADG. However, when I add a new 'city' to the 'State' that has been created, the open node icon is not displayed, even if the data is there. I know that the data is there, because when I click to open another node, the icon appears suddenly to the top-level node, that I just created. I can't understand why this is happening or how to fix it. I need to open the node icon to display when I add a child to it.
  
  I tried the validateNow() and invalidateDisplayList() on the ADG methods, but they do nothing...
  
  Please make suggestions.

  have you tried invalidateList?

• Must select and change all the type is defined in a specific font

  I'm working on my memory of brother-in-laws on the biology of the molecalar. It is very important in these types of documents, get all the names of some species and protein italicized. Unfortunately it manually set all those names in italics, instead of the use of character styles.

  I need some way to be able to select any italicized and assign a character style. Because the way in which this document of his is at least 140 pages A4 and the subject matter is way, way, way over my head, I need a way to automate the process.

  Y at - it a function or perhaps a script that automatically detects the type in a specific font and gives the possibility to assign a character style?

  Thank you

  I wrote a script to do exactly that - and replace all the exhibitors, indices, bold, bold italic, and a bunch more, with their Style of character equivalent. The script creates even all styles, that he needs.

  Download from http://www.jongware.com/binaries/preptext.zip - additional instructions and tips found in this same forum (search for "preptext").

• How to take account of changes to the data model view controller page.

  Hi all

  I use jdeveloper 12 c on windows.

  I create adf form view control data.

  now, I change the country_id column in the layer of data model in the corresponding view and assign the value list.

  but in the moment of the conception, the country_id filed shows normal text field.

  Instead, I want it to become a part of the select list.

  How to do this? How to keep account of changes we make in the layer of the layer of viewcontoller model?

  I mean, if I change something in the model, it should be automatically reflected on my page that is in sight controller.

  Kindly guide me.

  Thank you.

  Hi Maahjoor,

  All you have to do is just to refresh your data control, drag and drop the particular column. Now you can see the list of values. Unless he used.

  Thank you

  Kaim.

• Why Windows backup all files to predefined backup weekly? How can I get to only add additions and changes to the backup files?

  I back up my files to an external hard drive.  Rather than simply add changes or additions, it adds all the files each time, causing the hard drive fills up quickly.  This problem was not always present; It began less than a year ago, so I wonder if it was caused by an update.

  Hello

  Method 1: the link below will help you to set or change automatic backup settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  Method 2: you can also check out the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I hope this helps!

• slow account login and changed to the guest account administrator

  Original title: two problems with Windows 8: very slow connection and the guest account became a Director

  For about two weeks, computer Toshiba Satellite Windows 8 of my daughter was a very slow process. It takes sometimes 15 or 20 minutes for the prompt "Please wait" to take him to his login screen. We tried pretty much every difficulty to do this, including the deactivation of add-ins and the removal of disk utility that it does not use. We have not yet solved the problem.

  Upward, we can't even restore its system because, somehow, a guest account was appointed administrator on his laptop and we cannot put up-to-date because there has never been a password for the guest account. We tried a variety of things - create a new account and try to do this or our two accounts of the administrator in addition to comments. Nothing has worked.

  I'd be willing to take his laptop down to restore the system, but I can't because the guest is in charge. How can we change the administrator at one of our two accounts so that we can do a system restore?

  Thanks for your help, Ajay. Finally, I just did a system restore which took down for installation of Windows 8 and got the administrator once everything is back up to about eight hours later. Then I deleted all the bloatware that came with the laptop Toshiba, especially all the Junk Norton programs. I installed the 97 pending Windows updates with a clean boot and - abracadabra - problem solved!

  It is my daughter portable computer, but, like any other college kid, she ended up downloading a lot of junk. Since I am the administrator, I'll now have parental control on his laptop computer.

  Once again, thank you very much for your help on these issues.

• find and change between the two

  I want to change in my text frames written in the style of paragraph text "EBT".

  Between 1 to 3 of the text 'ABC '.

  Between the 4 and 7 'BIM' text

  Between 7 and 10 'KLM '.

  must write

  where and how a mistake

  var myDoc = app.activeDocument;
  var myFrame = myDoc.allPageItems;
  for(var i=0;i<myFrame.length;i++){
  //if(myFrame[i].appliedObjectStyle == tmc) {
  //if(i==5){break;}
  app.findGrepPreferences = app.changeGrepPreferences = null; 
  app.findGrepPreferences.appliedParagraphStyle = "myParS";
  app.findGrepPreferences.findWhat = "EBT";
  if ((i > 0) && (i <= 3)) {var changeX = app.changeGrepPreferences.changeTo  = "ABC";}
  if ((i > 3) && (i <= 7)) {var changeX = app.changeGrepPreferences.changeTo  = "BIM";}
  if ((i > 7) && (i <= 10)) {var changeX = app.changeGrepPreferences.changeTo  = "KLM";}
  myFrame[i].texts[0].changeGrep(); 
  app.findGrepPreferences = app.changeGrepPreferences = null; 
  
  

  Dirty solution... ;-)

  var myDoc = app.activeDocument;
  var myFrame = myDoc.allPageItems;
  
  for(var i=0;i 0) && (j <= 3)) {app.changeGrepPreferences.changeTo  = "ABC"; myFrame[i].changeGrep(); }
      if ((j > 3) && (j <= 7)) {app.changeGrepPreferences.changeTo  = "BIM"; myFrame[i].changeGrep(); }
      if ((j > 7) && (j <= 10)) {app.changeGrepPreferences.changeTo  = "KLM"; myFrame[i].changeGrep(); }
      app.findGrepPreferences = app.changeGrepPreferences = null;
  }