WTVConverter problem with multiple audio streams...

Similar Questions

• Windows Media Player cannot play the file because there is a problem with the audio device.

  Original title: Media Player

  I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you

  Hi MikeMcKayXE,

  ·         What is the brand and model of the computer?

  Follow the suggestions below for a possible solution:

  Method 1: Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card, and then click Uninstall driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  You can see the following article for more information:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Let us know if that helps.

• HP 470 G3 laptop: I have problem with multimedia Audio Controller

  I have instaled Windows 7 ultimate 64bite on my laptop and instaled all the driver I have can not install for sound and can't find it. I have problem with Multimedia Audio Contorller I try to auto update, but it does not work. Please help me guys.

  Thank you

  I recommend that you contact HP technical support and submit a case of covered by the guarantee.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• Problem with beats audio dv6-7010us

  Hello. I have a problem with my audio beats. I have the HP Pavilion dv6 7010us laptop.

  Product B5S11UA #ABA number

  BIOS F.06 30/04/2012

  When I listen to music, suddenly its increases and decreases, it is not give his maximum. It is a very big problem for me. How can I solve this problem? I hope for your help. I think it is a bug with the software audio beats.

  Reinstall the driver Audio IDT high definition (HD). This can be done from the Recovery Manager in Windows.

  You can also install this driver for Windows 7 64-bit

  An update may have caused the problem. Take a look in programs and features and updates select view installed to see if the audio driver has been updated.

• Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

  Original title: speaker FOR desktop

  In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

  "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  How to solve this problem.

  Hello

  I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

  I would like to know some information:

  1. Have you tried to plug any other speakers or headphones?

  2. You did changes to the hardware/software before this problem?

  3. Have you tried using these speakers with another PC?

  Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

  Hope this information helps.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Please get back to us with an update on the issue, we will be happy to help you.

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• audio device / I have a problem with the audio device from my computer

  No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device of

  I can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I have to do!
  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Problem with the audio sampling during export

  I'm having a problem with my audio sampling rate. For some reason, it is set at 8 khz by default when I export. It wasn't a problem until the last update (2 weeks ago). I'll try and give all the info I can to the front. I also tried customer support... which was a nightmare.

  OK, the question that I address is that when exporting audio sampling rate is 8 kHz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to the h.264 format, he insists on the reset to 8 kHz. Even if I manually set all look rendering queue and click on output module again once it back the sampling frequency to 8 khz automatically of changes that I need to set it again. Why can it not only be fixed to 48000 like all other adobe products is and as it was two weeks ago. Does anyone have an answer?

  This problem is resolved by update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• Problems with the audio using Hulu on Apple TV

  We meet a few important issues in streaming Hulu through Apple TV. The problem is with the audio. When we start a new episode of a television show, frequently, there is no audio data. The audio plays fine during the advertising leading up to the episode, but then he went to the start of the episode itself. Last night, for example, we tried to watch an episode of Casual. No sound. I restarted the same episode 3 times (which meant, annoyingly, I had to attend the same ad 3 times), and each time it was audio at the announcement, but then no sound during the episode. I unplugged Apple TV, wait a minute and plugged in. Choose the same episode and had the same problem.

  Before last night, we were sometimes able to get audio on Hulu content, but it is seldom worked without similar problems - there is no audio data, or sometimes there will be audio briefly but then it disappears. We will not experience this problem streaming other services by the Apple TV, such as Netflix, HBO or with iTunes media. Any advice?

  It is a second generation Apple TV, purchased in September 2010.

  Exactly the same problem with Hulu here on ATV2. Its been like that for months and only getting worse. Also, randomly that it recharges during playback. If you can spend the first few minutes of couple of a show (by the start/stop several times) it will play the rest of the show OK.

• A problem with the data stream reader online

  actually, I had any reader works fine but all my problem is when the workflow is loaded at the first moment where swf is loaded by the browser the stream starts to play and everything is fine with it, but main problem is that when I press STOP then play key again the gift of flow starts from current time of flow (as it don play of the current point now) , but he plays since the beginning of time the swf file was loaded early (when swf was loaded and jet was autoplayed) and this is my main problem tried challenging problem for lonnng time but no use. any idea?

  main part here of the code:

  var snd:Sound = new Sound();
  
  var volnum:Number = 1;
  
  var context:SoundLoaderContext = new SoundLoaderContext(8000, true);
  
  
  snd.load(songURL, context);
  
  
  
  var channel:SoundChannel;
  
  channel = snd.play();
  
  isPlaying = true; 
  
  
  
  addEventListener(Event.ENTER_FRAME, onEnterFrame);
  
  
  
  var bytes:ByteArray = new ByteArray();
  
  
  
  function playSound(event:MouseEvent):void {
  
            if (isPlaying == false) {
  
                      channel = snd.play();
  
                      isPlaying = true;
  
  
            } else {
  
  
            }
  
  
  }
  function stopSound(event:MouseEvent):void {
  
            channel.stop();
            isPlaying = false;
  
  }
  
  playBtn.addEventListener(MouseEvent.CLICK, playSound);
  stopBtn.addEventListener(MouseEvent.CLICK, stopSound);
  volDownBtn.addEventListener(MouseEvent.CLICK, volumeDown);
  volUpBtn.addEventListener(MouseEvent.CLICK, volumeUp);
  

  wish someone can help with this problem that took me so that without a solution

  Thank you very much

  Yes, that is using the url of your feed.

  If this does not work the way you want, the key is close the stream (if it is still open - using the close() method class' are sound) before attempting to open another stream.  This server do not simultaneously multiple open streams.

  Here is the code:

  //////////////////////////////////////////////////////////////////////

  import flash.media.Sound;

  import flash.media.SoundChannel;

  import flash.net.URLRequest;

  import flash.events.IOErrorEvent;

  import flash.events.Event;

  var snd:Sound;

  var channel: SoundChannel;

  var isPlaying:Boolean;

  var isStreaming:Boolean;

  var songURL:URLRequest = new URLRequest ("http://radio.virtualdj.com:8000/;stream.nsv"); ")

  var context: SoundLoaderContext = new SoundLoaderContext (8000, true);

  b.addEventListener (MouseEvent.CLICK, playSound);

  c.addEventListener (MouseEvent.CLICK, stopSound);

  function playSound(event:MouseEvent):void {}

  If (isPlaying == false) {}

  If {(snd)

  snd.removeEventListener (Event.OPEN, openF);

  snd.removeEventListener (Event.COMPLETE, completeF);

  snd.removeEventListener (IOErrorEvent.IO_ERROR, errorF);

  }

  SND = new Sound();

  snd.addEventListener (Event.OPEN, openF);

  snd.addEventListener (Event.COMPLETE, completeF);

  snd.addEventListener (IOErrorEvent.IO_ERROR, errorF);

  SND. Load (songURL, context);

  Channel = SND. Play();

  isPlaying = true;

  }

  }

  function stopSound(event:MouseEvent):void {}

  Channel.Stop ();

  {if (isStreaming)}

  SND. Close()

  }

  isPlaying = false;

  }

  function completeF(e:Event):void {}

  isStreaming = false;

  }

  function openF(e:Event):void {}

  isStreaming = true;

  }

  function errorF(e:IOErrorEvent):void {}

  trace (e);

  }

• Issue with Rolling Audio streaming video

  I have several flash according to the lessons that I have created that are distributed online at several companies.

  Each lesson has a video which is played within the lesson through the flvplayback control. The videos were provided by a third party and some of the videos are encoded at 384K and some are 568 k.

  A company that attempts to display the lessons is to see the following behavior. The video plays for 20 seconds, then suddenly drop video and the audio continues to play. Still play brosseuse video with audio restores and tries to start the video once again, but everything that comes through the audio track is new. Now, there are 2 cases of audio with no video. This happens a third time and finally keeps going until all the audio data takes place.

  The COMPUTER of the company staff has showed me a newspaper of Fiddlers that shows the flash player by connecting to Akamai to retrieve the video and then rolling to port 80 to port 1935 and finally to port 443. This would explain the three audio tracks playing

  I read that the flash player will attempt to collect the data stream to the specified location rtmp and then if it encounters a problem with a proxy or a firewall, it will try other ports.

  So I don't know if there is anything I can help alleviate this problem by design or programming. It seems to me that the company is trying to display this video has some kind of program in place which is the kickoff of this behavior in the throttling flash drive.

  Is it possible to prevent the flash player to present the three attempts? A sudden reduced guest of bandwidth the player to try to drive to another path, if a network load balancing program suddenly hit? If it's the bandwidth is that why the audio continues to play, because there is sufficient bandwidth for the audio to pass through, but not the video?

  I've attached a screenshot of the output of Snort, so you can see the ports rolling thing.

  can you detect the video replay after 20 seconds for the problematic society (perhaps using the stateChange event)?

  If so, you could create a 2nd swf that would load and use the tunnel.

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Problem with Driver Audio (Audio beats) HP Pavilion dv7 6190sl

  Hi guys,.

  my name is Francesco and I have a problem with the sound card in my PC...

  After formatting the PC, I reinstalled all the drivers, even if the installation is successful, I can't hear sound from my pc...

  Unfortunately, I deleted when formatting the disk that contains all drivers... (HP_Recovery)...

  You have a solution?

  Thanks, Francesco!

  Hello

  Open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select Properties.  Click the driver tab and then click on "update driver".  Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer.  "High definition Audio Device" left click once to highlight, then click the next button to install it.

  This makes all the difference?

  Kind regards

  DP - K

• Problems with multiple worksheets XY plotting (program generates repeated data)

  Hello

  I want to make a small program that will reduce the amount of time to go forward with the measurement data. I get data into .dat format, where all the files consist of frequency measurement with an X and a Y column. The problem is that I made 4 experiments (X column is the same for each experience) with 15 measures file each and more than 500 points of measurement in each file. I would like to make a simple manipulation and this copy that information to a file with same X column and multi-column, later I could use these data with Excel or origin (do it manually, it's frustrating and time consuming).

  At the beginning my program reads the background information with X and Y (b), and after I open the worksheet to insert the X and data of Y (n). (make a simple manipulation, like dividing Y (n) /Y (b), program show a graph of the current data and another graph multiple data, which are stored and must be exported in .txt, .dat or directly to Excel (which is more preferable)). I'm OK with the opening of several files of data, but which are not okay with copy/paste file and handle all that data manually, but that's my motivation for this program.

  The attached example can do all this (except for the entry in the file). He draws multiple charts on a XY chart using cluster and travel records. It is even possible to extract data in Excel, all that graphic, but the real problems comes with data are always added because of the loop. This gives a lot of empty and repeated data later. I'm jonesing to get rid of this. I have also attached several files of measure: 1 background and 3 measures.

  P.S. I tried to save time thanks to this program, but now, I spent more time than if I did it manually

  Your program absolutely no sense. What is the purpose of the structure of sequence? It just sits there, operating both in parallel to the while loop. Probably that you read from the local variables before other parts of the program had a chance to write valid data for them.

  In the while loop, you have a case of timeout that adds the same data over and over again, every 50ms. Why?

  Your mechanical actions "switch release" are misguided. Use actions to latch and remove structures deal as part of the event.

  Try to rethink the problem once the mode, and then solve the problem with 20% of your current code. See how far you get.