WVC54GCA alternative Viewer

Similar Questions

• Need confirmation that my streaming rtsp for the WVC54GCA settings are correct

  I have therefore recently implemented the WVC54GCA for viewing remotely via internet. I use Verizon DSL Westell Versalink 327W bridge, with the latest firmware (4.4.3) I was able to transmit an alternate HTTP port (1025), which allows the two TCP/UDP to my static IP of cams. I was also able to transfer the RTSP port (554), which allows the two TCP/UDP to my static IP cam. My problem is that my router will not forward any additional ports other than 1025 and 554.

  There is a setting on the camera for RTP data port (ranked from port 5000) and I can't transfer port 5000. I tried to change the setting of the cam to a bunch of different other than 5000 ports (6881, 1024, 1900, etc.), but no matter what I try, no other ports can be opened through my router. It seems to work via routers firmware (i.e., it looks like fixing to 1025 and 554, which advance) but when I check the port using canyouseeme.org or RCMP the port is classified as closed or camouflaged.

  I am able to view the cam of my office at rtsp://camname:554 / xxxxx using Quicktime or Realplayer.  However, neither my phone nore my friends can connect.

  My question, since I can see the flow of mobile streaming outside my local network using Realplayer or Quicktime, is "am I configured correctly for mobile (rtsp) streaming?  What is a cell phone rather than a problem of configuration problem?

  Sorry for the post above, I confirmed that my cam is correctly mobile video streaming.  The video stream has been consulted using a Samsung Omnia and Blackberry Curve.

  I am now home and confirms that, even if I've implemented port 5000 port forwarding, this port is listed as closed via canyouseeme.org.  The power supply works well, so I'm happy.

• Legacy DB - Advanced @ManyToOne mapping

  Hello
  
  I am facing a problem of advanced mapping that I will describe in detail, it's my work environment:
  
  DB: schema of legacy DB2 which cannot be changed as a decade-old application is to use.
  JPA: version 2, with the persistence provider Apache OpenJPA (cannot be changed by me either).
  
  These are the tables that should be mapped, in pseudocode:
  

  /* Stripped down for clarity. */
  PERSON(
    ID varchar, -- primary key
    FIRSTNAME varchar,
    LASTNAME varchar,
    TITLE smallint -- 'ID' of a referenced academic title, but this is not an actual foreign key! Pseudo-referenced column is 'TEXTS.ID'.
  )
  
  /* Stripped down for clarity. This table not only holds academic titles but various objects that for some reason did not deverse a table of their own. */
  TEXTS(
    CATEGORY varchar, -- academic titles have category 'Title'.
    ID smallint, -- numerical ID, is unique only per CATEGORY.
    NAME varchar, -- holds the actual title, like 'PhD'
    PRIMARY KEY(CATEGORY, ID)
  )

  That's what I want my JPA entity to look like:
  

  @Entity
  public class Person implements Serializable {
  
    @Id
    private String id;
    private String firstName;
    private String lastName;
    /* Mapping magic will go here. */
    private String title;
  }

  Now to my solution attempts:
  
  1.) using @SecondaryTable to map the title to the person does not like this annotation uses an inner join that will fail (produce bad results). Reason: has no CATEGORY in the PERSON table, and there may be several lines which share the same ID of table TEXTS (but have different values of CATEGORY).
  2.) Using @ManyToOne fails for the same exact reason: there is no way (I mean, I know) in standard JPA limit somehow a relationship on the value of a given column, record columns in the situations of the inheritance discriminator.
  
  I know Hibernate has a @Where annotation that allows to set a world where clause for an entity, which seems at least going in the right direction. I need a @Where annotation that can be defined on the join columns :-)
  
  The only possible, but rather in unsatisfactory solution I could come up with, it was to set the attribute as transitional title like this:
  

  @Transient
  private String title;

  Whenever I need a title (which I do a lot, people seem to like their brilliant title) must be examined manually. Are there any other solutions I should know, perhaps involving some OpenJPA magic freak I don't know of?

  I wouldn't focus too much on trying to solve this problem through JPA. What you have here is a 'problem' that you will encounter many forms - your business needs do not directly map to the data layer. This simply means that you need business logic to do the translation. For example, if it were a web layer I would implement a specialized bean which can take different entities and then provide an alternative view on the data, eventually producing it.

  If 'calculated' data are closely related to the database layer and less to the business layer then you could of course choose to remedy through the database itself - by creating a view and map an entity to whom. This is especially useful if you have the same data in several aspects of the application infrastructure and not just in Java code (think of reporting and analysis, for example), but there are other considerations as performance.

• Cannot remove my extension.

  Using JDeveloper I was working on the extension of VO. I had sent my work, including running jpximport, but now users have changed their minds. After trying to remove the extension I get the below error when I try to open the page by logging into the application:
  
  Houston-25002: Definition xxsd.oracle.apps.ia.requests.transfer.server.xxsdAssetSummaryVO of type as View Definition not found
  
  
  The page is always looking for the view object that was to be the alternative view object.
  
  To remove the extension, I logged application and the help of functional responsibility, I deleted the document I created. I also deleted the files (created by Jdev) I copied in $JAVA_TOP and $APPL_TOP. But I still get the above error. What should I do?
  
  We are running Oracle Financials R12.1.3.
  
  Thank you
  
  Emily

  Hi Emily,.

  Please try the commands in sqldeveloper/Toad below

  To check the substitution
  ---------------------------------
  Set serveroutput on;
  exec jdr_utils.printdocument('/oracle/apps/ia/requests/transfer/server/customizations/site/0/AssetSummaryVO ');

  o/p: check if it returns your extended VO

  To remove the substitution
  ---------------------------------
  Set serveroutput on;
  exec jdr_utils.deletedocument('/oracle/apps/ia/requests/transfer/server/customizations/site/0/AssetSummaryVO ');

  commit; -Important step is to make a commit after delete

  Thank you
  Robet

• Is there an alternative way to compute the sum of a column without accessor view

  Hi Experts,

  JDev 12 c,

  I have a column A and I'm total calculation of column A with the same VO as a view accessor. And calculating as below

  EmployeeViewAccessor.sum ("ColumnA").

  But this way, it loads the VO 2 times as it loads the accessor aswell.

  So is there an alternative way to calculate the sum of a column.

  Thank you

  Roy

  Use the analytical function, please see below Ex

  http://docs.Oracle.com/CD/B19306_01/server.102/b14200/functions163.htm

• Views materialized XE 11g... Alternatives, options, etc...

  Hi all

  Looking for any advice on the best options...

  My client is running 11 g XE for a fairly small type of finance application...  It everything works fine except for a number of reports of overall budget executed on-demand by senior management.   The problem is that reports aggregate budget information for the entire year based on summarizing information from about 3 main tables (containing between 100 k and 500 k records each) and a number of smaller tables of reference.    Its takes 5-10 minutes to run...  They expect the information immediately.

  I thought that creating materialized views for these reports would be a great solution, however, it seems that the creation of materialized views is not supported on XE? I can't create anything without a view log, and view log replication advanced needs...  I think that the progress of replication are only in Enterprise Edition? (can you create effective materialized views in standard edition? I might be able to convince the customer to upgrade...)

  So Im a little stuck...  The alternative in theory, would be some sort of solution based trigger handmade, or refresh work based, but it assumes quite awkward to put together compared to... also materialized views, I need to ensure that the data are pretty up to date at any time in time...

  The other factor that may be relevant is that a significant amount of information is probably the dormant months. i.e. most data changes occur in the current month, and contains all the previous months generally static information... She still need to aggregate the information, but database by previous months have changed...    (not sure if or how this could help or affect any particular solution..)

  Ideas, or input would be much appreciated...

  Kind regards

  Richard

  Select

  EBC.ID,

  Sum (b.budget) budget,

  Sum (p.amount) in line with forecasts,

  Sum (BR.bri_credit) real by

  Of

  EBC entity_budget_cat

  Join BR bri_recon

  on (ebc.id = BR. ENTITY_BUDGET_CAT_id)

  Join payments p

  on (ebc.id = p.ENTITY_BUDGET_CAT_id)

  Join t_budget b

  on (ebc.id = b.ENTITY_BUDGET_CAT)

  and ebc.id = 416

  Ebc.id group

  OK - this request is said that there is NO relationship between the BRI_RECON AND the PAYMENTS, as well as the T_BUDGET at all. They are three separate and distinct from ENTITY_BUDGET_CAT child tables.

  So why join them all together?

  Just interview each separately and together results - below is just for illustration...

  SELECT 416 as ID, SUM (BUDGET) budget, 0 in line with forecasts, 0 real by from table1 where ENTITY_BUDGET_CAT_ID = 416

  Who will get the data for 'budget' and model puts one zero for the other two

  Use more than two queries to get the forecasts and the real news

  UNION ALL

  SELECT 416 as ID, budget of 0, SUM (FORECAST) 0, in line with forecasts, as real 0 from table2

  UNION ALL

  SELECT 416 ID, 0, 0, budget in line with forecasts, SUM (PAYMENT) as real table 3

  The result will be three rows the wrap in another query to the SUM of the three values

  SELECT ID, SUM (BUDGET) BUDGET, SUM ESTIMATES (FORECAST), SUM (PAYMENT) PAYMENT

  (SUBQUERY above with three gathered together queries

  GROUP BY ID

  Create queries of complext of simpler components where possible.

• IPad Client for View 5 supports Subject Alternative Name (SAN) certificates?

  Does anyone know if the iPad App to see 5.0 Update for subject alternative name (SAN) certificates?  I tested a SAN certificate on a view Security Server 5.0, and it worked great for all the FQDN in the certificate when you use the view Windows 5.0-based Client.  However, when I try to connect using the iPad App, it seems to trust only the common name (CN) rather than additional complete domain names in the SAN certificate.  The nice thing about SAN certificates is that you can buy 1 certificate with a whole bunch of domain names and use the same certificate on multiple servers.  But this seems to break the view iPad customer.  Can anyone confirm that this is a limiation of the iPad App?  This should be corrected in a future release?  Or are we stuck buying individual certificates for each of our servers?

  I had this same problem.  I get mine from DigiCert, and they offer duplicate certificates.  I had a duplicate with my FQDN View Manager like CN first and installed.  After that, I was able to use it on the iPad.

• VMware View may be a good alternative for the Terminal Services?

  Hello people,

  We run the Terminal Services on Windows Server 2003 Ent. in a cluster environment. We have 4 TS who handle the load. Now, we are faced with a high volume of users within the company. We have a main office (Headquarters) and 10 more ease, all linking to the seat through the DRC. We are trying to find a better solution to deal with the high volume in a better way and we have VMware View.

  Do you think that is a good alternative?

  Any input, advice is really enjoying it.

  Thank you.

  I think that Desktop Virtualization (side Datacenter) and Terminal Server virtualization (Citrix or TS/RDP) pro and cons.

  You must deliver multiple environments or move the entire desktop to datacenter? Desktop virtualization could be better.

  You must provide a single application (or a few)? TS or some sort of virtualization to applications (such as ThinApp) solution could be better.

  Check out what you really need and how to access these services.

  Also consider licensing and where you can save costs.

  André

• Assistant Data Manager: could not download in a view - please provide alternatives

  Hi all
  Facts:
  * We are aware that we cannot use the wizard to load data to upload in a view. Currently, it only lets you download in tables.
  * I read that in future releases of access to views will also be possible.
  
  Question:
  * We have set up a secure such schema specified by Scott Spendolini (http://voug.org/2010_Presentations/Spendolini-Secure%20APEX%20Development.pdf)
  * We use a diagram of the shade to protect our data, so that this scheme has no privilege to create tables, views, etc.
  
  Interim solution:
  * We thought to create a single temp table to be able to download the data. Our plan was to create this table based on the definition of the table of apex collection (WWV_FLOW_COLLECTIONS$)
  It can be generic and used by multiple applications instead of having each develover to create their own table.
  We know that it would break our security rules as our shadow scheme should not have any table, but at least we will limit the number of tables created if we create this generic table.
  
  But the problem with this approach is that, when the user navigates to the page "Data/Table mapping", the list drop-down column shows C001, C002, C003 name, etc. Of course, is not meaninful for the user.
  
  Question: Is there a way to dynamically change the name of this column depending on the application? I sailed the shared components - > Tables of data-> add/edit data Load loading Table but has not found a place to update the name of the column.
  
  Tips:
  If the interim solution above does not work, can provide you an alternative solution?
  
  Thank you
  Violeta

  Hi Violeta,

  Can I find out what version of apex you run now? with apex 4.1.1 you should be able to download points of view.

  Kind regards
  Patrick

• XQuery - looking for alternatives to "ora: view»

  Instead of the following XQuery statement, what could be, alternatives for re-writing the declaration, through options such as:
  -xmltable
  -xsql
  -xpath
  -table (xmlsequence ())
  -etc.
  
  So, I'm looking for other statements and/or an alternative for ora: view
  
  Thanks for the effort
  
  Marco
  

  xquery
   let $auction := ora:view("XMLType_Table") return
   for $b in $auction/site/people/person[@id = "person0"] return $b/name/text()
  /

  Published by: Marco Gralike on October 19, 2008 15:48

  And here is a table (version xmlsequence

  select extractValue(value(e), 'name')
  from XTAB,
  TABLE(xmlsequence(extract(object_value,'site/people/person[@id = "person0"]/name'))) e;
  

• Alternative to MS Excel for viewing and the calculation

  Good evening

  I am looking for an alternative to MS Excel. My use case is:

  (1) collect data using Labwindows CVI

  2) store in .csv files

  (3) with Labwindows CVI to copy data from .csv files into .xls templates

  -some calculations of data is executed by ICB

  -some equations are in the Excel file and get automatically calculated after you paste the data

  -existing charts in Excel templates display data calculated after copying

  Given that the amount of files has grown over the years and data analysis is becoming increasingly heavy, I'm looking for an alternative allows

  (a) possibilities for visualization of data and the flexibility of chaning that later

  (b) calculation within the tool (I don't want to have too many equations hidden in some C programs)

  (c) integration in Labwindows CVI (I can change that... but not quite yet)

  Anyone have a recommendation?

  Thank you!

  Hi ZerMahlMeer,

  Tiara not only allows you to perform a multitude of analyses (very easily I might add) on your data, it provides even the ability to automate the entire data, analysis and reporting through Visual Basic Script.  Another really nice feature of DIAdem is that it copies the data that you import and saves it as. Files TDM that prevents overwriting your original data.  If you did, you might also the scrap of the generation of the .csv file and use the C API of TDMS.  This allows you to save data much faster because of the binary structure of TDMS files and then you can open these files in Excel using the TDM Plugin OR for Excel (free to download) and import natively in DIAdem.

  What you call sounds almost exactly what DIAdem is made.  The only transient pain point can be get used to writing VBS if you don't know the code.  However, most of the things that you do not want to refer to a script (for example data channels) can be simply dragged from DIAdem data portal to the script to generate the script code to access this item.  There is also a script recorder that allows you to perform activities of DTC using configuration dialog boxes and automatically capture this activity in the script, so the rise is also greatly facilitated.

• Not able to see the new Member shared alternative hierarchy on Smart view

  Hello

  I had to make changes on the replacement as a hierarchy below:

  1 created shared member on the new roll upward with Member Shared Property (replacing Hierarchy).

  2 removed the former member under the other roll upward.

  3 refreshed the Hyperion, planning of database.

  4 could see the new Member roll up on the alternative hierarchy after refresh.

  Now, when I try to extract data from the new hierarchy of alternative, I'm not able to get the data that I get the error message like "Invalid Grid - size XXXX member is located at the wrong location".

  I choose the option 'selection of members' members, but the grid is not valid when I try to extract data on smartview.

  Have I missed any step to make changes on the planning? I checked from myside to display the shared member on Essbase after updating of the planning application.

  Can you please help me in fixing the issue?

  Thank you.

  VERP.

  Thanks Dan.

  Tried to build the new sheet, and I was able to run successfully. Members have been placed wrongly and could fix it.

• Views of alternative funds

  Hi, I am a newbie of muse and first time I tried to make a website.

  I'm trying to set up a site which is optimized not only on a 27-inch screen, but also computer 13 "laptop. Is it possible to be implemented in two funds for different sizes or is it possible to enter the code of the muse to add some kind of query so that laptops actually see the tablet display.

  Thank you

  You can have several Office layouts in Muse, but you can design your site so that you target the content of your page fits into the size of the smaller office/laptop screen and then to use 100% width items to fill the width of the browser nicely for monitors more grand/more wide.

  If the key is to keep the content of your site within the width of a 13 "laptop and make other elements of background (like the separator bars or header) as 100% width (so that they expand to the width of the browser.

  Checkout Adobe Muse CC tutorial - elements 100% Flexible width - YouTube

  See you soon,.

  Vikas

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• Hiroto, alternation of colors back to positions in a discussion

  Someone in the room asked alternating positions in a discussion background colors.  I tried, but didn't get far.

  I can not get: nth-child (odd) or any nth child at work.  I am running firefox 47.

  When I went on the nth child, I receive the messages from the original poster crushed.  I tried to fix this, but couldn't figure out how to do.

  /*div#body-apple div.all-replies-container li:nth-child(odd)  {background-color: yellow;}*/
  
  div#body-apple div.all-replies-container li  div.jive-thread-message.clearfix:nth-child(odd)  {background-color: yellow;}
  
  /* Attempt to fix up original poster's replies */
  
  /* div#body-apple div.jive-thread-message.clearfix div.original-poster-comment {background-color: yellowgreen !important;}*/
  

  Hello

  Sorry for replying so late. I was stuck with something and off the Board for a while. Not sure that you are always to tackle this but here is my attempt at combination of background colors another post.

  * In the flat view content, this will create backgrounds replacing correctly as planned but in the display of thematic content, this function will define only replacing horizons by each level of withdrawal due to the document tree.

  /*
      file:
          alternate post background colour.css
     
      function:
          set alternate backgound colour for thread posts
     
      version:
          v0.10
              - draft
  */
  @-moz-document
      domain(communities.apple.com),
      domain(discussions.apple.com),
      domain(discussionsjapan.apple.com),
      domain(discussionskorea.apple.com),
      domain(discussionschinese.apple.com)
  {
      /* ------------------
          alternate post background
      */
      .j-thread li.reply:nth-of-type(2n+0) > div.jive-thread-message > .jive-content::before {
          content: '' !important;
          background: none repeat scroll 0% 0% rgb(247, 249, 247) !important;     /* pale green */
          position: absolute !important;
          top: 0px !important;
          right: -10px !important;
          bottom: 0px !important;
          left: -10px !important;
          z-index: -3 !important;
      }
      .j-thread li.reply:nth-of-type(2n+1) > div.jive-thread-message > .jive-content::before {
          content: '' !important;
          background: none repeat scroll 0% 0% rgb(250, 252, 250) !important;     /* paler green */
          position: absolute !important;
          top: 0px !important;
          right: -10px !important;
          bottom: 0px !important;
          left: -10px !important;
          z-index: -3 !important;
      }
  }
  

  And here is a palette of colors complementary backgound as resolved, useful messages, recommended and original poster. This can be used independently or with the alternate color combination. If used independently, you can activate the message rules border almost to the end, which is for a sharper distinction between messages but currently put in comment.

  /*
      file:
          categorised post background colour.css
     
      function:
          set backgound colour for solved, helpful, recommended and original poster's posts
     
      version:
          v0.11
              - increased selector specificity for solved, helpful, recommended answers
                so that this can be used with alternate post background colour.css
          v0.10
              - draft
  */
  @-moz-document
      domain(communities.apple.com),
      domain(discussions.apple.com),
      domain(discussionsjapan.apple.com),
      domain(discussionskorea.apple.com),
      domain(discussionschinese.apple.com)
  {
      /* ------------------
          original poster background
      */
      /* thread original messeage (question) */
      .j-thread-post section.j-original-message {
          margin: 0px 30px !important;
          padding: 15px 10px !important;
          border-style: dotted !important;
          border-width: thin !important;
          background: none repeat scroll 0% 0% rgb(247, 247, 237) !important;     /* beige */
      }
  
      /* original poster message background */
      .original-poster-higlight {
          background: none repeat scroll 0% 0% transparent !important;
      }
      .original-poster-higlight::after {
          content: '' !important;
          background: none repeat scroll 0% 0% rgb(247, 247, 237) !important;     /* beige */
          position: absolute !important;
          top: -5px !important;
          right: -15px !important;
          bottom: -5px !important;
          left: -15px !important;
          z-index: -2 !important;
      }
  
      /* ------------------
          solved, helpful, recommended answer background
      */
      /* solved answer background */
      .j-thread ul > li.reply > div[itemprop="acceptedAnswer"].jive-thread-message > .jive-content {
          background: none repeat scroll 0% 0% transparent !important;
      }
      .j-thread ul > li.reply > div[itemprop="acceptedAnswer"].jive-thread-message > .jive-content:before {
          content: '' !important;
          background: none repeat scroll 0% 0% rgb(237, 247, 232) !important;     /* green */
          position: absolute !important;
          top: 0px !important;
          right: -10px !important;
          bottom: 0px !important;
          left: -10px !important;
          z-index: -1 !important;
      }
  
      /* helpful answer background */
      .j-thread ul > li.reply > div.jive-thread-message > .jive-content.j-helpful {
          background: none repeat scroll 0% 0% transparent !important;
      }
      .j-thread ul > li.reply > div.jive-thread-message > .jive-content.j-helpful:before {
          content: '' !important;
          background: none repeat scroll 0% 0% rgb(250, 240, 220) !important;     /* orange */
          position: absolute !important;
          top: 0px !important;
          right: -10px !important;
          bottom: 0px !important;
          left: -10px !important;
          z-index: -1 !important;
      }
  
      /* recommended answer background */
      .j-thread ul > li.reply > div.jive-thread-message > .jive-content.j-correct {
          background: none repeat scroll 0% 0% transparent !important;
      }
      .j-thread ul > li.reply > div.jive-thread-message > .jive-content.j-correct:before {
          content: '' !important;
          background: none repeat scroll 0% 0% rgb(237, 247, 232) !important;     /* green */
          position: absolute !important;
          top: 0px !important;
          right: -10px !important;
          bottom: 0px !important;
          left: -10px !important;
          z-index: -1 !important;
      }
  
      /* ------------------
          rolled-up (solved|recommend) answer background
      */
      .j-answer-rollup.span-full-width {
          background: none repeat scroll 0% 0% rgb(237, 247, 232) !important;     /* green */
          padding-bottom: 10px !important;
          margin: 20px 0px 0px 0px !important;
          border: 1px solid rgb(45, 184, 71) !important;
      }
  
      /* ------------------
          promoted (helpful|recommended) answer background
      */
      .j-inline-promoted-helpful-answer {
          padding: 5px 10px !important;
          background: none repeat scroll 0% 0% rgb(250, 240, 220) !important;     /* orange */
      }
      .j-inline-recommended-answer {
          padding: 5px 10px !important;
          background: none repeat scroll 0% 0% rgb(237, 247, 232) !important;     /* green */
      }
  
      /* ------------------
          thread message box
      */
      /* message border */
      /* currently off; these borders might be redundant if alternate post background scheme is employed */
  /*
      .j-inline-promoted-helpful-answer,
      .j-inline-recommended-answer,
      .jive-discussion-replies li.reply .jive-thread-message {
          border-style: dotted !important;
          border-width: thin !important;
      }
  */
  
      /* thread content margins */
      .j-thread .jive-content { margin: 0px 10px !important; }
  }
  

  Briefly tested with Firefox 45.2.0esr on OS X 10.6.8.

  Good luck

  H