WX350 - why camera appear no warning when you take pictures without a memory card?

Similar Questions

• How did you record pictures from a memory card on computer?

  How did you record pictures from a memory card on computer do not directly use HP Photosmart 7520 web services?

  No, that would be the only way to access the memory card.

• my memory card for my digital camera does not work when I put it in the memory card slot

  I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

  Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
  then
  Device Manager
  Expand portable devices
  the type of memory card slots should be listed if your type is a yellow triangle in it,
  Right-click on it and choose uninstall.
  It should reinstall it automatically or when you put the memory card in the slot.
  This type of fault is often caused by not using material on the taskbar does not safely remove request.

• BlackBerry Smartphones using the trackpad to zoom when you take pictures of BB Bold 9700

  I'm used to be able to use the trackpad to zoom when taking pictures or recording videos.  It has suddenly stopped and I can't understand why.  Can anyone help please?

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  Return to the previous MAC OS until it's resolved.

  Lightroom and El Capitan | Mac OS 10.11

• How to stop the elements to appear to refresh when you visit the following pages?

  I put a navigation bar and the logo on the master page, that are inherited by all pages and sub-pages related to it. The navigation bar and logo still seems to refresh when you move from one page to another. I find this extremely annoying. I thought that perhaps this Visual discomfort has occurred in the application of Muse in preview mode - or only the first time that a page has been loaded. So with empty Safari cache, I went the direct start tutorial site: katiesbakerycafe.com and found that the bar of navigation-logo on the subpages (which differs from the homepage) updated the visit of one of the secondary pages - Menu, Gallery, Blog, Contact - for the first time. But the bar of navigation-logo did not appear to refresh when you click back amongst these pages after the first visit. Yes, only half-bad, but still annoying.

  Is there a way to stop this Visual gene on a site created in Muse?

  In the past, I would have set up navigation on the periphery of my Web page and used a large framework containing all the pages that use the same navigation bar.

  
  

  Thank you.
  

  Hi Pamela,.

  The html code generated for the master page is repeated for each page to that master is applied. So it refreshes the page on each fresh charge, after which browser implements cache data to avoid reloading of static content.

  What you are referring is not possible in Muse at this stage. I would recommend that you post this idea to our section ideas, ideas for features in Adobe Muse

  - Abhishek Maurya

• Why Windows Media Player Dump existing MP3s when I add new to SD memory card?

  Why Windows Media Player Dump existing MP3s when I add new to SD memory card?

  Is there a setting I'm missing or something I forgot?

  All that I could find for now is the following. I'll try to get WMP to give me the new option.

  Connect the player to the computer (if you get a menu of Autostart just close it), open WMP and then go to the Sync tab, click on the small arrow below, then down the list to your rocket, a fly out menu will pop to the top and in this menu, you will descend to configure synchronization and will open a window called Device Setup , In the upper left corner, there is a checkbox indicating automatically synchronize this device, make sure it is not checked. If you get a menu when you plug it in, having options that wants to know if you want to allow yourself music, or delete it and make room for new files, make sure you click on the music of leave on my device option. You must be sure of automatic synchronization is disabled and that WMp is not deleting you music so you can add others.

• Configure the dng converter to work when you download your photos from a card to the 1 step?

  is it possible to implement the dng converter to work when you download your photos from a card to the 1 step? At the present time, I have to transfer CR2 files into a file and then convert.

  Is there a way to achieve downloading?

  Bridge > file > get photos from camera

  Check the convert to DNG

  

  I guess it would work exactly the same from a card reader to plug the camera into a USB port.

• IPhone 6 stop when you take a picture

  My Iphone 6 (a little more than one year - iOS 9.2.1) is going down, when I take a picture and I have a little less than 50% of the battery left. So I plugged into electricity to start again.

  The only things that keep the problem is to switch the battery saving mode.

  Anyone with the same problem?

  Best regards, Laura

  My iPhone will also turn off when you take a picture.

  Happens to me on a 6 s iPhone too.

  For me, it happens when I go out and have not used the phone for a while and pick up the phone to take a picture. It happened on a 5s iPhone in the past.

  There is also usually a cold day, no sub zero, but cold.

  It's especially annoying as when out and about, I usually don't have a power supply to plug the phone in.

  If I leave the phone for half an hour, the phone can be turned on again without going through a connecting the power supply and it shows a level of reasonable, green power, in the status bar, but it stops again, trying to take a photo.

  See you soon

  Paul

  iPhone iOS 9.2.1 6s

• When you take a Flash inside the shutter remains open as if you used no flash.

  When you take a Flash inside the shutter remains open as if you used no flash. The anti-shake icon is visible in the viewfinder before a picture is taken.

  The handshake that you see indicates that the device is set to use 1/30 of a second shutter speed or slower. This explains the symptoms you describe. There are other parameters that will allow you to do, but the first thing to check is to make sure that the flash setting is not set to slow sync menu.

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• How to choose the dpi specific when you scan pictures on printer Envy 5530/5535

  Printer using HP Envy 5530/35 on Mac, using HP Scan software app. When you scan pictures I want as much detail as possible. The only option I have to increase the resolution is to use the 'best '. That scans only at about 200 dpi I think. How can I scan at 300 or 600 dpi?

  Mac, Mavericks, entirely software update HP. Purchase printer less than 3 months ago.

  try to go to Preferences system then printers and scanners.

  on the scan tab, click Open scanner

  with this scanning application, you can select the DPI

  If its does not try to click Preview or view details

• The Pro Adobe bought, downloaded the file (with 1, 67MB) on laptop with OS Win8. When you try to install (my memory C: 2.39 GB free) the file, Adobe dialog says "the computer memory space is not enough. This is ridiculous. What can I do?

  The Pro Adobe bought, downloaded the file (with 1, 67MB) on laptop with OS Win8. When you try to install (my memory C: 2.39 GB free) the file, Adobe dialog says "the computer memory space is not enough. This is ridiculous. What can I do?

  Just click on the link acrobat XI and download download Acrobat pro products, acrobat XI | Standard, Pro | XI, X