Wyse thin client: autostart and full screen

Similar Questions

• XP SP3 causes BSOD during the passage of the WYSE Thin Client session to session VMware VDM Web Access

  Hello

  For our VDI environment, we use both clients Wyse thin (Thin OS 6.2.0_16) and VMware VDM Web Access to access Windows XP virtual machines that are available through the VMware VDM connection server. The connection and the agent server is at version 2.1.1 build-663. We run ESX 3.5 and Virtual Center 2.5 times with update 3.

  The issue I'm having is once a Windows XP SP2 virtual computer has been upgraded to SP3 will be blue screen when I try to access it for the Wyse terminal after his last accessed from VMware VDM Web Access. Order real to get there would be to access the VM SP3 from the Wyse Terminal, then go VDM Web access, and then again from the Wyse Terminal and it will have a blue screen. Disconnect or disconnect makes a difference. I'm curious to see if anyone else has this problem. I enclose the capture of blue screen and the mini dump file. If you need more information please let me know.

  Thanks for your help!

  -Pete

  Hi Peter,.

  The root cause of the problem is change colordepth of 15 bits to 16 bits. Let me explain the cause of the problem.

  -Connection of the terminal WYSE in a VM XP - effective colordepth in the RDP session = 15 bits

  -Access Web VDM from PC connection (I guess) - effective in the RDP session colordepth = 16 bits.

  -The switch back to results WYSE Thin Client = 15 new bits

  This actually switch between colordepth 15 bits to 16 bits and viseversa result BSOD.

  Thank you to use DesktopColorDepth = 16 RGB565 = Yes command in your wnos.ini and try to place this order through brokers VDM. It should solve the problem.

  Thank you

  Blanchon

• WYSE Thin Client 3290 Office administrator password Dell

  WYSE Thin Client 3290 Office administrator password Dell

  I bought 7 of these new units and I'm trying to take them on my network, but it tells me I must have administrator level to do so.

  So I followed all this connect blogs out there who say how to get to the administrator and the magic password "Wyse #123" and I get nowhere.

  I tried all the others out there, but all messages seem to be old.

  Can someone tell me what is this combination of magic password?

  Try to use "DellCCCvdi".

  Roger Montalvo
  Visit our Wyse Thin Client Dell Knowledge Base and the web site of manuals on www.wyse.com/KB
  Visit our Wyse PocketCloud Dell Knowledge Base manuals website and at http://pocketcloudsupport.Wyse.com/forums
  [SIGPIC] [/SIGPIC]

• Reduce the buttons and full-screen are missing since the upgrade to Windows 10.

  Shortly after I installed Windows 10, Restore Down/Full screen minimize and close buttons are gone. I reinstalled FF, but they aren't there yet.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• projector and full screen problem

  Kind of a strange question, but I have a clip on the stage that has a video of flvplayback. I hide it unless it is triggered by a click of a button. I export my file as an exe of the projection. Then when I hit fullscreen projector (in 'view') window, it shows my video fullscreen... So it of as if she shows the video layer, makes active and displays it. Ideas as to why an order of menu of the project itself would trigger this layer to unmask and go full screen?

  Yes.

• Can I do Expert Mode and full screen size my default setting for PES 11?

  Whenever I have open a new image in ACR and open image that the editing screen will return to the FAST mode and a smaller screen size.  I then have to click on to change to EXPERT mode, then click to make full screen.  I never had this problem with PES 10.

  (I get RAW images in from outside and not by the Organizer).

  Is there a way to define these default values?

  If you right click on the shortcut of PES 11 and select Properties, is whatever it is checked in the compatibility tab?

• Browser and full screen mode menu bar

  I like browser and I love full screen with menu bar. This is per pallet block the image on both sides. Everything that can be done? Thank you.

  Well, I can suggest something to try.   I don't have a Mac, so I will try to advise you as if it even works on Mac and PC, with a bit of padding between the lines...

  But before experimenting, save your current workspace a name via the new workspace - Workspace - window menu.  Name it something like Kevin.  Then, you will still be able to get back to it by selecting it by name in the small box at the top right.

  Once you have registered your current workspace, take Photoshop out of mode full screen by pressing F.

  Now choose window - frame of the Application, if not already done (you want to).

  Drag the edges of the Photoshop window so it covers almost the same amount of screen as the space between the panels that you're showing above.  In other words, it will go almost to the top and almost down, but leaves a few inches of space to the left and to the right.

  Now drag the panels of their tabs just outside the edge of the image to the Application, so that they are essentially in the same places that you are showing them above.

  With a few adjustments and finesse, you should be able to come pretty close to duplicating the layout you previously, but the difference will be that in the display tabbed documents will remain as part of the application, which is not under the panels.

  I hope this was clear enough to follow.  Let me know if run you into any part of it.

  -Christmas

• How can I add 'Volume control' button and 'full screen' skin to read?

  I'm working on the CP5. I would like to add my .swf file playback control bar. But in the skins of CP, I can't find the "Volume control" and the button "full screen". So how to solve this problem? Thank you very much.

  Welcome to our community

  Sorry, but Captivate has never offered Thos options. At least not as options of the PlayBar. Captivate is offers an option for full screen, but you should choose at the time wherever you post your output.

  

  If you want a Volume control, Captivate 5 offers a Volume control widget, that you can insert into the project.

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• How to control the implementation of devices that cannot run any agent, such as thin clients, printers, and other press.

  I have an OOB layout that has all the ports from the switch controlled by the same profile. I would like to be able to place clients on a network, printers on one another and tell on another unix systems. Right now I have a filter that lets the clients on the network, and they are put on the vlan by default to access via port profile. The filter is by MAC address.

  What is the only way we can do that?

  Can we put things on different networks, using this method, if so how?

  Any help would be appreciated.

  Hello

  When you create a new filter for a specific MAC/IP, we should select the "Access Type" for this device.

  As shown in the attached screenshot (taken from the NAC 4.8), we also have the ability to define the type of access based on a specific user role.

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Full screen with Wyse V10L (WTS)

  I saw a few discussions on this before, but none of them have more than a workaround... and not a very viable at this.

  When you use a Wyse V10L (running a WTS operating system), users who log on are presented with a "windowed" mode... the bar of WTS on the background (think windows start bar) is present when running a guest operating system.

  This poses a problem, because users often end up clicking this button instead of the windows XP Start button.

  The workaround is to log on to the workstation using VMware View Client and set the full screen mode, first.  Therefore, all additional connections, either by the client of broker/thin or view, by default in fullscreen.  Change the option in the settings of thin client is not possible... it is grayed and on any computer virtual does not use the Client to view the value "windowed mode".

  There must be a configuration file or a setting or something I can change programmatically... somewhere it's just a matter of finding that the configuration.

  Does anyone have any ideas where I could start looking for such a config file?  It would be perhaps in the VMX somewhere, or is it stored somewhere on the server?

  You need to login to http://commerce.wyse.com/ - your Wyse account representative should be able to get an account for you, if you have warranty or maintenance Wyse thin clients

• fullscreen is not full screen, unless I use "expand" and later goes back

  I used to be able rely on full screen and it would be nice, and when I closed ff, after reboot it will re-start in fullscreen. Something a gliched. When I press on full screen in regular format, mode full screen is not complete, only about 90-95% of the screen. I can make it go full screen if I click
  "expand" and then full screen, but if, at any time, the screen is not expanded, the same thing happens. If I close enlarged and full screen
  It opens with the reduction in full screen. I can't move or stretch out in anything except the normal screen, and even once, I click on full screen. I never had this problem.

  Believe it or not, after a week of uninstalling, reinstalling, verification of configurations, I simply décliqués menu toolbar, and now it works perfectly regular, maximize and full screen. Go figure. Thanks to your efforts, people.

• possible bug in colorTransform-related mode full screen (projector and standalone flash player 10)

  Hi all

  It seems to have hit a bug in the current drive (tested on 10.1.52.14):

  If I programmatically change the color of a sprite consisting in a text and a circle the output is different if the application is in mode full-screen (the text is not colored in fs)

  In my class mousedown event handler I call the following (slightly simplified the code to make things easier to understand here):

  var cTrans:ColorTransform = new ColorTransform();

  _hColor =0xD78500
  Recolor the clicked sprite
  cTrans.color = _hColor;

  this.transform.colorTransform = cTrans;

  This is what I get in windowed mode (expected behavior):

  It's the same sprite full screen:

  I can switch between windowed mode and full screen and the text gets colorful or not, as stated above.

  Anyone got clues about what's going on? I mean that's not supposed to probably not be that way...

  No solution (easy) workaround?

  Thank you very much

  Mike

  Well I tried to make a projector and do not see with it, but then again my install puts 10.0.22.87 in the projector.

  I could try changing the Sprite to a MovieClip and see if that helps.

• Connecting the thin client to the virtual desktop

  Guys, I'm looking to provide some knowledge of locations to my current View 4 implementation. I need essentially allow thin clients in the room for a particular virtual desktop access, but the user access to all other workstations when they are in a different room\different thin client.

  At the present time, it seems possible to connect a desktop computer to an end user and not a customer light name or address etc.

  Is there anyway that I can link a pool of funds or office to a lightweight client device so that the bureau is only launched from this location?

  Thank you

  We are able to do something like that today.  Serve us our Wyse thin client and when the thin clients boot they go to an ftp site to obtain their configuration files.  The configuration file can be modified to configure how clients view client work light linux.  So, to process your request, we would put in class A on a network that has a config file that will automatically connect to a certain pool of virtual desktops.  In all networks, they would receive a configuration file that allows them to get the menu and choose what desktop Pool to connect to.

  I don't know what light supplier customer, you have, but I'm assuming that Wyse is not the only one with a certain type of configuration like this.

• I can not re - set the option full screen to normal.

  I put the screen in full-screen, and now I can't re - set as a normal screen. How can I cancel my mistake?

  Firefox uses the F11 function key to switch between normal and full screen. Or, if you drag the mouse all the way to the top of the screen and right click, you should get the option to exit full-screen. Do any of these work?

• After the update Firefox 25 tabs "will return" 2 to 3 pages, when switching tab or exit full-screen.

  It happens more frequently when you exit the full screen of a video. for example, youtube, dailymotion, nbc.com - the entire site with embedded video players.

  When you exit the full screen, the page goes back 2-3 pages. And no, I'm not clicking on videos related everything fullscreen all the time: that's all by launching full-screen and full-screen, all on the same page of output video.

  This happens less frequently during the passage of the tabs - but if I switch to another tab, then return, the first tab will load the page that I've been there are 2 pages.

  More information: when this happens, the "arrow" is grayed out and the page that loads is on the list of the "arrow" twice - lower in the list where it should be, as well as the top of the list, as if I had clicked on a link to this page.

  All this started immediately after restart Firefox after updating to version 25 - no other changes have been made to my computer.

  The problems were with HTML5

  Subject: config > media.webm.enabled > false

  Problem solved! BY ME!

  (Attached picture is a screen CAP that shows up if HTML5 is disabled. I had noticed before the update of Firefox, but it was never enough to the top of long to actually read, and I didn't really like. When she returned immediately after the deactivation of HTML5, I did a screen CAP to see what has increased. Oh I see... something worked, so some fool decided to fix it... Genius!)