XB270HU light I have tasks "frequented".

Similar Questions

• And how does one remove Christmas lights that have been offered as a decoration for the top and shifts of the screen. They tend to hide the navigation bar.

  And how one removes the Christmas lights that have been offered as a decoration for the top and bottom of the screen. They tend to hide the navigation bar. Several days ago Firefox gave the 'dress-up' in a message.

  It seems that https://addons.mozilla.org/firefox/addon/christmas-lights/ is added as an extension, but is categorized as a character (lightweight themes). Go to tools > Modules then check extensions and themes, and then uninstall it.

  Now that the status bar is now the toolbar addons that I see those that are listed are all personas and they do not affect the toolbar addons you would also find a theme, and think that it must be very confused now that I no longer able to filter topics with a Google addons research - phooey.

  Extensions can be identified with intitle: Add - ons and have changed my research of extension add-ons accordingly.

• cDAQ HAVE task using external clock

  Hi, I am trying to use a clock signal on a line of PFI in order to generate a clock, but at a lower rate, for a task to HAVE.  I run into many issues that I can't explain.

  I have a cDAQ-9172 with an entrance module analog (9225) in the Groove 3 and a digital input module (9411 - 2 MHz DI) into the slot 6 (where the PFI lines are accessible).  I want to use an external signal on et0/PFI0 to act as the clock for an analog input on the 9225 task.  This signal comes from the cDAQ anothr chassis and is too fast for the task to HAVE it, so I intend to use the time base entrance and the divider to clock (as shown on page 31 of the cDAQ-9172 manual).  See picture attached for a graphical representation of my problem.

  If I have the wiring from the signal "/ cDAQ2Mod6/PFI0" in the DAQmx timing VI, get the error 200414 saying that "required sample clock source is not valid."  It is strange because it is listed as "Direct route" in Max (the VI of polymorphic DAQmx Timing is configured as 'Sample clock') Q: why this route is not suitable for the task?

  If I use DAQmx Timing property node and change the Source 'Sample clock Timebase' to ' / cDAQ2Mod6/PFI0 ", the task starts without error, but the separation seems to be forced to 256.  If I try to change the properties of the separation of the time base, I get error-201100.  Try to change the 'sample clock rate"doesn't have any impact on the task and the remains of divider"256 ".  Q: why the 'Programmable clock divider"locked to 256 when using the PFI line or can you just not program directly?

  I came across another error is the minimum speed on the PFI line.  If I have the wiring (for the SamplClock Timebase) lower at 1 MHz, LabVIEW returns error-200077.  The error message indicates that the minimum value is 1 MHz.  9172 manual shows the clock 100 kHz is an option for the time base, certainly less than 1 MHz.  Q: What are the limits of upper and lower frequency for a clock signal on the line PFI for the ' Timebase AI/SampleClock "?

  I looked on the site and in the DAQmx documentation for further explanation, but I have been unable to explain these strange behaviors.  What are the barriers to entry of Timebase PFI and the time base "Programmable clock divider" preventing me to reach my goal here?  If I can't do it directly, can I use the PFIn signal to feed an internal counter (to act as the clock divider) which could then generate the clock WAS at the rate I want?  This method would allow me to perform a division arbitrary clock (unlike the ' 256', which seems to be forced on the PFI as a Timebase SampleClock.)

  Finally, something seems odd that I can make an acquisition to 10Sa/s max but when I start a task using an internal timers of the cDAQ9172 and ask a 10Sa/s rate, the task really gives me a rate of 1612.9 sample/s while using the 12.8 MHz clock and a divider 7936 timebase.  Q: Why can't the task to 10Sa/s?

  I use DAQmx 9.7.0 and LV2012 SP1 (and I tried with 9.7.5 but I got the same results)

  Thank you

  Olivier

  I got additional help Friday in another engineer at NEITHER and the solution to my original problem is actually very simple to get the clock from an external source path:

  

  The idea of picking a PFI line for the basis of 'time' and the 'Programmable clock divider"(in fact, DAQmx calculate this number based on"HAVE sample time clock"and"Sample clock HAVE") works by using the node property below:

  

  (SampleClock.Source cannot be resolved until the task is clerks/reserved, but the default option seems to be the time base that works well in this case.)

  The question that I described earlier with the 9225 comes the module properties and the fact that it is a "Module of Sigma - Delta".  That the module usually generates its own time of 12.8 MHz base clock (page 14 of the document 9225 # 374707) and the clock divisor is much less possible values than the other modules (must be a multiple of 256). It may use a different time basis from a PFI line, but it must be between 1 MHz and 13.15 MHz.

  So a main clock between two chassis and tasks running at different rates of sharing should be easy and simple with most of the modules.  With AI modules with Sigma-Delta converters add additional limitations and the master clock for the time base frequency must be selected to accommodate these module as well.

  Another good news is that the Simulator seems to bear all these details and DAQmx (9.7.0 in my case) generates the same errors when you use a simulated chassis if you use real body.  Play well!

• Please I have task manager does not work on my system

  problem: the Task Manager

  error message: your task manager is disabled, contact the administrator

  Hello

  Please see here: http://support.microsoft.com/kb/555480

  In this case, after the changes, this message comes back, then it means that you're dealing with malware that defines this new policy.

  In this case, please perform a scan with your antivirus software (make sure it is up-to-date before you scan with it).

• I have to frequently restart WRT54G to re-establish the connection

  I've had my WRT54G for about 3 years now. It is connected to my cable modem and my desktop PC running Windows XP.

  I use the wireless router to connect my laptop and my roommate to sound (both running Windows XP).

  I'm encounteringa problem of not being able to get on the Internet. My laptop says that I'm connected to my wireless network, but still no Internet. I also had the same problem (no Internet) with the desktop PC.

  I end up having to do is restart my wireless router and that immediately solved the problem. I am then back up on the Internet.

  This happens at least once a day, sometimes 2 or 3 times a day I have to do this. It is very annoying, not being able to depend on my Internet connectability. Sometimes I can get right away, other times I do the router restarts.

  This is especially a problem when I'm not home and my roommate can't get online (it's all in my locked room).

  I went through the process of resetting the configuration of my WRT54G so reinstall completely altogether. Yet, this problem happens again.

  Please notify.

  I think that you need to update / re Flash the firmware of the router.

• I just bought an Airport Extreme and try to put in place.  I have Fios cable with a router.  I can not get anything except a blinking orange light.  After reading the instructions, it seems that the problem with the ethernet cable but I

  Must not exceed the flashing orange light.  have tried three ethernet cables to the Fios router.  All thoughts

  What extreme version do you have?

  Test the cables connecting the airport to your Mac with them and see if the ethernet works on Mac. Green connectivity light should go... If it fails, then the AE died.

  Please do a factory reset, then try again.

  Sometimes Mac airport utility works well... If you have the preference or iphone ipad, download and use iOS version airport utility and try it for configuration... It is much less awkward.

• Frequent crashes - using 900, 00 k + memory, multiple tabs open - is the memory use a problem?

  I have a frequent crashing Firefox, several times a day.

  I have several tabs open, 100 +, and the memory usage is around 900 000 and more.

  I wonder if the memory usage is the origin of the crash, or something I can fix it?

  My task manager says that I use 67 percent of the available memory.

  Total: 2941

  Caching: 1202

  Free: 74

  Total: 207

  Paginated: 153

  No paged: 53

  Pagefile 2981M / 6116M

  This is the id of the 10 reports last crash:

  BP-c79bc97e-D502-4319-a49e-7bc0b2130917 9/16/201311:38 PM
  BP-19f60b05-F268-4693-B622-066f42130917 9/16/20139:59 PM
  BP-f43d9597-9023-487A-90d4-994d32130916 9/16/20137:15 PM
  BP-b552cdc4-6920-4EED-bff7-cb7cf2130916 9/16 / 20136:16:00
  BP-b62272cb-f4ef-4F30-ACC9-4a1752130916 9/16 / 20135:14:00
  BP-f4bebdd3-20f9-4444-8245-520c42130916 9/16 / 20133:20:00
  BP-bad99992-5b2b-4ac1-96bc-e03812130915 9/14/201311:31 PM
  962c451e-DC19-4707-9def-b2dd5cd4caed 9/14 / 201310:19:00
  BP-8de4bc69-0f86-417A-9727-e88622130914 9/14/20132:29 AM
  BP-6ae9815f-1472-492d-8738-1cd842130914 9/14 / 20131:01:00

  Where can I set preferences for dom.ipc.plugins. *? (I see no plugins or extensions of Tools-Addons that resemble a dom.ipc.plugins?)

  Extensions I have are:

  AddBlock

  Protection of navigation

  Troubleshooter

  YesScript

  PLugins:
  
  
  

  Java

  Shock wave

  Could you point me to where in mozilla crash reports that I would find the number of open tabs and memory as being the cause of the accident? (just so I can check after I have try to reset that plugin.exe run to start again I can take a look and see if the memory usage is better - or should I look at the Task Manager for that information also)?

  I noted the crush in the report was "EXCEPTION_BREAKPOINT", I guess that's a reason for exception error due to many different causes?

  I also noticed a report of incidents listed:

  Total virtual memory: 2147352576

  Available virtual memory: 533061632

  System Memory use Percentage: 72

  Available page file: 3324129280

  Physical memory available: 852447232

  What is the indication of memory, you see?

  Are these 'bad' (high usage) values of memory?

• My iPhone hangs very frequently

  I have very frequently hangs pl help

  Have you tried the basics of manual?

  Reboot, reset, restore

• I have to zoom out new tab to see then the 4 sites, new tabs still has 3.

  I recently updated my firefox. My tab used to have 6 boxes, among these 4had sites I have visited frequently.
  There are 3 now instead of 6. I can zoomout to find my 4th, but the next time I open a tab his 3 again. is there a topic: config option that set the size of the new tab?

  Hi, you can keep the same zoom setting by: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

  It is also possible about: config to change the maximum number of tiles by scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Omen of HP: HP keyboard light Isuues Omen

  Hello

  Recently bought a harbinger of HP, in the first few weeks of use worked fine but recently the backlit keyboard stopped ligting upward, the only lights that work now are the power button and animated speakers all keys, including the macro keys now have no backlight. First, I tried to find out if it was a problem with the control center of HP Omen, but all that happens is when changing the color, it turns on for a matter of half a second, then the blip again, I have the LED on its maximum intensity and have tried all of the colors, the fact that it lights up for a split second then off again makes me doubt is a problem with the lighting system and well more still to do with windows. I tried to uninstall the control center of Omen and reinstall it but that had no effect at all. I was wondering if anyone had suggestions for a way to fix it because it is an important part of the laptop that is not working and a major inconvenience for me as I play in a room with a very low light, so have a backlit keyboard for me is essential. Any help would be appreciated!

  Dear Harrycypress101-

  I understand that the backlit keyboard of your new HARBINGER does not work.  I did a little research and apparently, after a BIOS update, the keypad backlight turns off.  I don't know if you have made an update of the BIOS, but by pressing F5 to turn it back on.

  If F5 does not resolve the problem, then check that your OMEN is updated using the document Support from HP using HP Support Assistant (Windows 8).

  If none of these suggestions resolve the issue, you may contact HP to service. Since your OMEN is new, it is still under warranty. Check the status of your warranty by going to check the status of your warranty.

  Good luck

  DHTP

• Qosmio X 870 - 13v - graphic problem steam L4D game - black shadow on the light

  Hello

  I play this game using 2 PC Toshiba laptop.

  A Satellite L670-1KZ: 2.67 Ghz - Radeon Mobility HD5650 - RAM 6 GB i5.
  A Qosmio X 870 - 13v: i7-3630QM 2.4 Ghz - GeForce GTX 670 M & Intel HD Graphics 4000 - 32 GB of RAM.

  On the 1st, I have no graphic problem.
  On the Qosmio, I have a BIG problem with little light that have large black stain on it.

  You can see the 'bug' on YT here below:

  https://www.YouTube.com/watch?v=c4E2DFScyfU&feature=youtu.be

  The configuration of the game is the same on both machines with the exception of the resolution.
  My drivers are up to date (GeForce & Intel).
  I uninstalled the game twice only = no results.
  Settings, to control panel Nvidia, I changed several times (Note option shadows cache) no = no results.
  I played with game config below only = no results.

  I posted on the forum of steam only = no response.
  I posted on the forum of Nvidia only = no response.

  So, can you help me solve this problem?

  With our thanks,
  Guillaume.

  You have any other graphic matter using this Qosmio X 870 - 13v?
  I mean other problems related to the image to appear in other games and other applications running?

  Otherwise I n t think that there is something wrong with the laptop.
  In this case, it looks like very specific issues between this game and probably the graphics driver.

  It turns out that you won't encounter problems under this game the Satellite L670 with ATI driver.
  The Qosmio is supported by the nVidia GPU

  I think there must be a link any between the nVidia GPU and this game.
  In my opinion you should look for the solution in the steam forums or nvidia even if you have not received answer yet.

• The Airport Extreme 2 to died (light orange) 5 years

  A few days ago my MacBook pro let me know he could ' t locate the time capsule and hand't stored in more than a week.  I checked the other computers in the House, I discovered that they were all not finding time capsule not more.  When I checked the device the light was green, and all machines were connected to the wifi signal that he died.  I unplugged the Airport Extreme and gave him a minute or two and it reconnected.  I never heard the spin drive up so I guess the hard drive should have failed a few weeks ago.  After power cycling the light remains orange solid, and wifi no longer works.  Airport utility will not find the device.

  My questions are:

  Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

  Should I just install a new hard drive, if so where can I get the disk image format?

  Thank you for reading this!

  Why if the wifi work until it's the power to bike after the hard drive failed?  The fact that the wifi does not work now shows that I should just trash and get a new one?

  It worked because the TC was functional, even if the hard drive was not... If you open airport utility you should have seen a hard drive error, but he might have ignored, so... in fact the main light must have been orange flashing not green.

  The TC is designed to test the hard drive when starting... If it fails the TC does not start.

  You will have an indicators of solid orange color which is hard drive failure.

  If you open the TC you can replace the drive. See https://www.ifixit.com/Device/Apple_Time_Capsule

  Should I just install a new hard drive, if so where can I get the disk image format?

  Once you install the disk simply go to the tab of disc airport utility and erase the drive... which will set it up properly.

  One thing to consider is the economy... a TC 5 years really may not be worth a repair... power supplies can also go wrong.

  If it's a Gen3 and when you open it is brand Delta power, then it might be interesting to replace the drive... a Gen4 usually also would be worthwhile. Disk 4 Gen is WD green... and he might have lost format rather that died... you could so be able to simply delete it.

  Tell me the A1xxx of the base model and I can help you understand what to do... I've fixed hundreds of them.

• receiving exception "resource requested by this task has already been used by another task' for unknown reason

  Hi people.

  I am running in a bazaar error I'm not around.  I have a series of cDAQ chassis (9188) with a number of NOR 9208 each.  Everything I'm doing is the simplest of the simple acquisition of VI to extract data from each of the 16 channels of each 9208 and push values for the configuration UI.

  NOTE: the material is SIMULATED in MAX.

  I'm trying to create a task for each 9208, but DAQmx start Task.vi bombs out after the code creates the first few tasks successfully.  The exception:

  "Error occurred 200022 DAQmx = begin Task.vi; "Possible reasons: resource requested by this task has already been reserved by another task."

  Please see the attached screenshot.  I have provided two tables of physical constants Channel. Bombs currently wired table on 'AI_Module_07 '.  The unwired table bombs on the last "AI_Module_08".  It seems that I can move these constants in the table, so there is little or no motive behind the order.

  There are also segments of screenshot of MAX and the exception in the block diagram.

  Thanks to a bouquet.

  -Chris

  Hello Chris,

  Based on the screenshot you provided, it looks like you use too many independent tasks in a single chassis - I think that the timing engine can handle three (four memory), but based on this knowledge basethree simultaneous HAVE tasks - you can certainly use all eight locations to HAVE, but they will need to be divided into synchronized subsets.

  That said, if it is in fact the problem is that I feel, a more specific error would appropriate the "resource" referred in the present case is ostensibly the timing engine, but further clarification would be useful.

  Best regards

• Parallel tasks within the Vision of script Wizard

  Hello

  I am new to the wizard of vision of NOR, I think I can miss a clear interface tool, but I can does not seem to find anything.

  I need to have parallel tasks in a script to identify a certain area. Basically I want to reuse a result of intermediate treatment several times before taking the lines together for the answer.

  That is to say to have task 3 then Task4, 5 in the other branch.

  Task 1-> task 2-> task-> task-> response 6 3

  Task 1-> task 2-> Task 4-> task-> task-> response 6 5

  Hey Mike,

  You might go on your application is to use the image in the buffer stage. The basic idea of this method would be as follows:

  1.) your image

  (2.) your first steps

  (3.) your image to a buffer store

  4.) take next steps on the image

  5.) performs the logical comparison between your current image and the image contained in the buffer.

  This method is not necessarily parallel treatment, but would be a way to accomplish what it seems you are trying to do in NI Vision Assistant. See the attached example for some clarification on the method, I proposed.

  Hope this helps,

  -Ben

  (The sample script is in vision) 3.6 So also attached is a screenshot of the steps. Is also attached the image of the sample used for the script)

• darkness in the light of print on each page

  Printer HP 4200, had notification of low ink level and pages were dark to light printing, have installed new ink cartridge, alignment page printed correctly, scanned that prompted, test page prints the dark of light as well as all other pages the same as with the old cartridge.

  Hello

  What is the operating system installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Updated the printer driver and check if that helps.

  Updated a hardware driver that is not working properly

  Method 2: Clean the print head by referring to the manual of the printer and check if it helps.

  If the problem persists, contact HP support, and check to see if it helps.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413