xlsx export fails to lines 25 526

Similar Questions

• Export Type mismatch failed on line 262

  Hi all
  
  I'm loading inter-company data of FDM 9 x to HFM 9 x.
  
  I have configured successfully FM9i-G4 - A.xml FDM IC adapter.
  
  Can someone advice how I should load the data file between firms with the amount of the transaction and the rate of Conversion of Curr? How can I derive from the principal amount on the fly by multiplying Trans Curr Curr Conversion rate?
  
  ======================
  That's what I tried...
  ======================
  
  My import format contains, entity, account, C1 to C4, Trans amount (mapped with the column amount in FDM) and Currency Conversion rate (CCR)
  
  What I do not give the amount of the entity?
  
  I want to calculate the amount of the entity with the following formula: TN = varvalues entity (9) * varvalues (37)
  
  I tried to give the formula AS mapping, but I get the error type mismatch (not the one I mentioned in the subject). I know it's because of varvalues (37) returns a string. I tried to use the Val() or CDBL() function, but they do not work.
  
  Then I delete the map and tried to export data. However, the export fails before you generate the data file and gives the following error: (error log given)
  
  * Start the journal entry for the Runtime Error FDM [2011-03-26-10: 27:05] *.
  -------------------------------------------------------------
  ERROR:
  Code......................................... 13
  Description... Type mismatch
  Online: 262
  Process... clsBlockProcessor.ActExport
  The component... upsWBlockProcessorDM
  Version...................................... 931
  Thread....................................... 7320

  Hello

  I suggest that join you Oracle. There are severe design considerations when you use the HFM - IC adapter, but also bugs in version 9 x. I should know... I have written/discovered them when I worked there.

  That being said... you get this error on line 262 is because it expects a 'Double' value... and FDM is passing as a "string". You will need to change the Action to export the IC card and wrap the value in a statement CDBL().

  Hope this helps...

• I get this error message at Windows startup upward: ' failed 'on line 80"value creation".

  original title: failed on line, 80 of value creation

  The following parser message appears at startup:

  (Value creation failed "to line 80).

  The message is displayed each time you start. Did all possible system restores. The system is Win XP Pro SP3.

  Anyone had success/experience to deal with it?

  Hello

  ·         How long have you been faced with this problem to?

  ·         Remember to make changes to the system?

  ·         What happens when you try to do a system restore?

  Method 1:

  Check if this article helps you fix the problem

  Error when you open Add or remove programs: ' failed 'at line 410' of value creation.

  http://support.Microsoft.com/kb/823768

  Method 2:

  If the problem persists, we recommend that you try the following steps and check the result.

  a. Click Start, click Run, type cmd and click ok.

  b. at the command prompt, type sfc/scannow and press ENTER.
  c. once the analysis is complete, restart the computer and check if the problem persists.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Export failed: file not found (< path of the VM folder > \autoinst.flp).

  I'm trying to export server Ubuntu LTS 64 14.04 OVF format and I get the following error:

  Export failed: file not found (< path of the VM folder > \autoinst.flp).

  It works for my other OS as well as Ubuntu LTS Desktop 14.04.  I have a 10 Workstation on a windows machine 7 and 11 of the workstation with the latest patch on 14 Ubuntu LTS Desktop and get the same error when you try to export the specific operating system.

  I solved this problem myself.  The original virtual machine had its hardware settings pointing to autoinst.iso.  She does not have this file and when I ran the error did not prevent the virtual machine to boot the system.  I cloned VM and the setting of the material had the floppy pointing to autoinst.flp.  I removed this material setting and now I can create an OVF file for it.

• Windows 7 64-bit Lightroom CC Web export fails - message says "the original file is missing.  It is a nonsense.  If I use an excerpt from browser, the web page is created without any problem.  I use page preview created as a round work but why don't web

  Trying to export a web page standard, as I have many times before with LR 5.  Now with Lightroom CC web export fails, with a list of images, each original saying file is missing.  They don't miss - all other types of export work OK.  The overview of the web browser works well and I use it as a round piece for the moment.  Please Adobe sort this issue!

  Hugh Letheren

  This problem has resolved itself.  The export feature now works as it should.  I not did something to fix the problem - very strange - but thanks for trying to help everyone!

• DCP export fails

  Hello!

  I can't export with the new STC Wraptor plugin, for what I saw am not alone, but I have seen no response on the subject after a lot of research, so I post here:

  Since the beginning of the SOUL export fails:

  "A low-level exception occurred in: Wraptor DCP (Export).

  Error during export

  Video compilation error.

  Unknown error. "

  So I'm a little lost, such error encrypted can not help me find the source of the problem

  my video is 4 ' 43, so I don't think there is a time limit.

  It is square pixels 1080p25, 48 kHz stereo sound

  For my setup: 4790K i7 CPU; RAM16Go 1.6 Ghz; 256 GB SSD HARD DRIVE. Win7 64-bit. First CC

  Thanks to you all!

  Tom

  If you are lining up at the SOUL of the Organization, please try to disable the option "Import sequences in native mode" in the preferences of the SOUL before queuing your project.

  Also, I hear some reports that STC fails over a period of time.  If you change the duration of your export, do you still see the problem?  Or you can try some different sources for code to see if this problem is specific to a given substance?

• Export failed, where is the temp file?

  I'm on version 6 of first.  An export of media has failed in the Middle due to lack of space.  Before export, the hard disk has about 1 GB of free space.  After export failed, the player ends up with 10MB of free space.  I suspect that there might be some temporary files and intermediaries created during the export process.  I checked the output folder and deleted the temp file. But the space has not been recovered.  Anyone else where I should check?

  You work with a single hard drive?

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 see answer 4 for the parameter that you must manually change... and then delete the old temporary files

• OIM 11 g Deployment Manager Export - Export failed

  Hello
  
  I'm trying to export the files to the Deployment Manager using the "Deployment Manager export file". The popup loads fine and it Let's select me the objects without any problem. In the last step when he asks where do I want to save the file after entering the file name and a path on my local computer, automatic export fails an "Export failed" error on the screen.
  
  I checked the logs of IOM field, there are no errors/warnings lifted in the diagnosis or regular newspapers. Has anyone ever encountered this problem?

  Try changing your version of java running in your browser.

  -Kevin

• Rendering and export failed with an unknown error because of the color of Lumetri?

  I am rendering & export failures with an 'unknown error' code within Premiere Pro and Media Encoder.  I think that the problem is related to the Lumetri color filter that is widely used in all of the timeline.  There are hundreds of clips and each clip has 2-4 color filters Lumetri applied.  Each clip also has the red giant Cosmo and filter FilmConvert Pro 2.36.1 coming to overlap (visually underneath by order of effects filters Panel) all filters from Lumetri.  The reason why I believe that the problem is related to the Lumetri color filter is that it is the first time that I use.  Previously, I used the filter red giant Colorista III coloring, but last week decided to try using the Lumetri color for the same effect.

  Please let me know if anyone has had similar experiences, what were their solutions, or if someone has some ideas on how to solve this problem.  I would really appreciate the help!

  System details:

  Windows Pro 64-bit 10

  Intel i7 5960 X 8-core 3.0GHz (cooled water and too quick to 4.2 GHz)

  64GB 2133 MHz DRAM (non-ECC)

  2 x Nvidia GTX 980 4 GB GPUs (not in SLI)

  Intel 750 PCIe 400 GB SSD (for BONES)

  SSD Pro 1 TB Samsung 840 (for Adobe Cache)

  SSD Pro 1 TB Samsung 840 (for export)

  Matrix RAID 5 of 48 TB (eight 6 TB HDs with MegaRAID, LSI 9361-8i card) (for media)

  Information on the timeline:

  1920 x 1080 (original video files are MP4 UHD scaled down by 50% in the timeline)

  23.976 fps

  CUDA Mercury Render Engine

  Length of the sequence: 14:30

  I have discovered a workaround of sorts.  I noticed that when rendered in PP he would make progress before a failure (the green line that precedes the timeline would get a little longer).  If I saved this progress and rebooted the system, then tried to make it again, it would make a little further.  I've done this dozens of times for 4 hours make completely a 14:30 long sequence.

  I noticed doing this routine that my CPU was maxxed on all rendered.  Resource monitor reported the use of CPU to 143% continuous (all other indicators RAM, disk speed, etc. were well under their maximums).  This brings me to suspect that maybe there is a problem with overheating of the CPU.  But who would be closed for the entire system, correct?

  Once the entire sequence has been made (all the green lines above clips) I tried export by using the "Use preview files" option enabled.  Failure again.  I tried export uncompressed AVI, Quicktimes and PNG sequences.  All have failed.  I tried to export to PP as well as TEA.  The two have not.  I tried to export with option 'To make maximum quality' is enabled.  Surprisingly, this product the longest time encoding managed (32 minutes before failure).  As by chance, using the option of MRQ kept my CPU loads sawtoothing between 100% and 75%, then maybe there's something to the CPU overheating theory?

  In an ultimate attempt desperate to save my video project (looming deadlines!) I divided the sequence of Assembly in five servings (I cut on the melted white or fade-to-black transitions) and exported to each of them.  This copy export times within 20 minutes.  It worked.

  I noticed this another Adobe Forums thread that seems to speak of the similar difficulties with effects of Lumetri in Creative Cloud 2015.  Perhaps the Lumetri effects are not ready for prime time?

  https://forums.Adobe.com/thread/1236018?start=0 & tstart = 0

  Please let me know if anyone has any ideas on this.  In the meantime, I'll wind up this project and never use Lumetri effects again.

  Hello Kevin,

  Thank you for offering help to solve this problem.

  I was able to export the majority of the sequence with all the Lumetri effects, red giant and FilmConvert mixed in clips.  After the sequence using the tedious method described above I segmented the sequence in the quarterfinals; all exported except one.  I divided it into two; Another exported doesn't have.  I cut half too, once again only half exported without failure.  I finally reduced the embarrassing part until a second sequence clips 35; an interview with green screen with superimposed titles and superposition of b-roll clips.

  I removed all the effects of the Lumetri of these clips and replaced by Red Giant Colorista III effects, which are very similar to the effect of Lumetri in the GUI and application.  The sequence made completely without "unknown error."  Then it was exported successfully (and used about 70% when compared to more CPU activity 110% with the Lumetri to export).

  The difference would be that the effect of color of Lumetri has this YUV icon next to it in the effect controls panel?  Which means that YUV?

  The problem is perhaps not totally related to the color of Lumetri effect (as I said, I was able to export the majority of the 14:30 sequences use, although gradually by segmentation of the sequence into smaller portions), but if the move is a solution then I'll use it.

  I lost a day to fix this.  If this thread is useful to someone else, then it was worthwhile.

• Export failed PP and encoder

  I export a file which lasts three minutes. He linked files HAVE and an export of Alpha effects. When I try to export to Vimeo, it fails, saying that the user stop the export (when I did obviously not). I get the same error that I go through PP or encode. When I delete all files HAVE and Alpha, the same problem occurs. I was able to export from a different project file no problem, so with encoder and the PP seems to work very well. There is no multicam sequences and there is no nested sequences. Here's the exact error (file directories have been changed to protect the customer.

  -------------------------------------------------------

  -Source file: /Users/User/Library/Caches/TemporaryItems/Client.prproj

  -File output: / Volumes/LaCie 4TB /-/ Client/composite/Module/Module 0 0 Composite.mp4

  -Preset used: Custom

  -Video: 1280 x 720 (1.0), 23.976 fps, Progressive, 00:03:00:11

  -Audio: AAC, 320 kbps, 48 kHz, stereo

  -Bitrate: VBR, 1 package, target 8,00 Mbps, Max 10.00 MB/s

  -Encoding Time: 00:00:02

  07/08/2015 09:29:22: encoding failed

  -------------------------------------

  The operation was interrupted by the user

  -------------------------------------

  -Encoding Time: 00:01:02

  07/08/2015 09:30:36: encoding failed

  -------------------------------------------------------

  Export error

  Movie compilation error.

  Unknown error.

  -------------------------------------------------------.

  Anyone have any ideas?

  Just thought about it, if someone else has this problem. I was in a cup of morph. In the timeline panel, I noticed, there was a red line where everything was yellow (rendering). When I tried to make just this little part, it did not. Remove this transition has allowed me to export without problem.

• Error exporting Excel selected lines

  Hello

  I work at an application in ADF 12.1.3.0.0

  I have a table and I would like to export to excel with lines of all lines and Selected options.

  I created a menu with two options. I added an export Collection Action Listener for menus, for all lines works fine but the selected lines does not find because it shows only a last selected row.

  Initially, the selection of rows in table property was one, but later I changed to the multiple. I see on the table of buttom that I selected several lines, but when I press the button "Exportar an Excel columns Seleccionadas" (Export to Excel columns selected) the downloaded file has only the last column selected.

  What is going on?

  Code:

  ...

  < f: facet = 'menu' name >

  < text af:menu = 'File' id = 'm2 '.

  Binding = "#{backingBeanScope.backing_cabeceraRecepcion.m2}" >

  < af:commandMenuItem text = "Exportar an Excel all columns" id = "cmi1.

  Binding = "#{backingBeanScope.backing_cabeceraRecepcion.cmi1}" >

  < af:exportCollectionActionListener type = "excelHTML".

  exportedId = "resId1".

  filename = "TodosPedidosRecepcionar.xls"

  title = "Todos los orders a Recepcionar" / >

  < / af:commandMenuItem >

  < af:commandMenuItem text = "Exportar an Excel columns Seleccionadas.

  ID = "cmi3.

  Binding = "#{backingBeanScope.backing_cabeceraRecepcion.cmi3} '"

  immediate = "true" >

  < af:exportCollectionActionListener type = "excelHTML".

  exportedId = "resId1".

  exportedRows = "selected".

  filename = "PedidosRecepcionarSeleccionados.xls"

  title = "orders a Recepcionar became" / >

  < / af:commandMenuItem >

  < af:commandMenuItem text = "Show in una page" id = "cmi2.

  Binding = "#{backingBeanScope.backing_cabeceraRecepcion.cmi2}" >

  < af:showPrintablePageBehavior / >

  < / af:commandMenuItem >

  < / af:menu >

  < / f: facet >

  < name f: facet = "toolbar" / >

  < name f: facet = 'bar of Θtat' / >

  < af:table value = "#{bindings." F4311_Recepcion_Group_queryVO1.collectionModel}.

  var = "row".

  lines = ' #{bindings. " F4311_Recepcion_Group_queryVO1.rangeSize}.

  emptyText = "#{bindings." F4311_Recepcion_Group_queryVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  selectedRowKeys = ' #{bindings. " F4311_Recepcion_Group_queryVO1.collectionModel.selectedRow}.

  selectionListener = "#{bindings." F4311_Recepcion_Group_queryVO1.collectionModel.makeCurrent}.

  rowSelection = "multiple".

  fetchSize = "#{bindings." F4311_Recepcion_Group_queryVO1.rangeSize}.

  filterModel = "#{bindings." ImplicitViewCriteriaQuery.queryDescriptor}.

  queryListener = ' #{bindings. " ImplicitViewCriteriaQuery.processQuery}.

  varStatus = 'vs' id = 'resId1 '.

  Binding = "#{backingBeanScope.backing_cabeceraRecepcion.resId1} '"

  columnBandingInterval = '0' scrollPolicy = "scroll".

  autoHeightRows = "10" filterVisible = "true".

  columnStretching = "multiple" styleClass = "AFStretchWidth" >

  < af:column sortProperty = "#{bindings." F4311_Recepcion_Group_queryVO1.hints.Pdkcoo.name}.

  filterable = "true" sortable = "true".

  headerText = "#{bindings." F4311_Recepcion_Group_queryVO1.hints.Pdkcoo.label}.

  ID = "resId1c1" minimumWidth = "12" width = "100" >

  < af:outputText value = "#{rank." Pdkcoo}.

  shortDesc = "#{bindings." F4311_Recepcion_Group_queryVO1.hints.Pdkcoo.ToolTip}.

  ID = "ot1" / >

  < / af:column >

  ...

  Thank you

  Alfre.

  Alfre,

  Remove the line below and see if it is and no difference.

  selectedRowKeys = ' #{bindings. " F4311_Recepcion_Group_queryVO1.collectionModel.selectedRow}.

  Check out the link for more details below:

  https://blogs.Oracle.com/ADF/entry/getting_all_selected_rows_in_adf_table_with_multiple_rows_selection_enabled

  See you soon

  AJ

• Why keep MXF OP1a export fails?

  Hey geniuses! Got a puzzle for you brain game. I'm trying to export our first episode of graveyard Carz by using the network card: MXF OP1a XAVC I Class300 QFHD 50 p.

  This is the error I get inside media encoder:

  Movie compilation error.

  Import error

  Importer returned wrong result.

  Writing with the exporter: MXF OP1a

  Writing to the file: X:\S06_GRAVEYARD_CARZ\06_DELIVERY\FINAL UHD RENDERS\EPISODE_01\GYC_S06_E01_160709.mxf

  Around the time code: 00:00:21:20 - 00:00:21:24

  Reading with the importer: CFHD_MOV_Importer

  Reading file: X:\S06_GRAVEYARD_CARZ\02_ASSETS\1. PROGRAM GRAPHICS\LOWERTHIRDS\MARK WORMAN.mov

  Reading file type: MooV

  Rendering at offset: 21,400 seconds

  Component: CFHD_MOV_Importer of importing type

  Selector: 47

  Error code: 2

  According to the approximate time code that it fails, we have a lowerthird pre-rendered placed on top of the timeline. It is made with Cineform 4444 for alpha.

  My system:

  HP Z820 with 2 x E5-2670, 64 GB RAM, GeForce GTX 960, Windows Professional 10.

  All content source existing on the network fed by the little tree drive and is related to my system with a 10 Gbit Ethernet Adapter.

  And for the sake of clarity, this issue took place in the market. For example, two days ago, we were able to make the episode without any problem. This morning, fails every time in the same place.

  This happens if I mercury software read-only or if I use the GPU support.

  It also happens if I return on first or if I do inside Media Encoder.

  Finally, don't know if it's related, yesterday, first stopped to read some of my Quicktime rendered using PNG. He said that they did not have the audio or video stream. Quicktime reinstalling does not fix the problem. And cleaning of data bases and the cache has not solved the problem either. Strangely, Adobe After Effect could read and I re-renderings using Cineform and they charge very well.

  Hope you guys have answers. Thank you very much for your time.

  Seems that the problem has been resolved.

  It turns out that earlier I have had emptied my cache of media, first had not yet finished create new cache files and therefore could not make files that had no cache files created, causing Media Encoder crashing.

  Now that the media has be cached, it seems to be very well made.

  It is a real disappointment that I had to wait two hours for the cache of media fill.

• Sort to create the total columns to XLS/XLSX exported reports?

  I have a script which extracts VM information for several different clients and exports separate worksheets for each client to a single worksheet. The columns include CPU, memory, DiskGB, etc.. I'm trying to figure out if there is a way to add a line as the total of the values of specific columns in the report. I did a lot of research and did not have much luck. Any suggestions?

  Thank you

  Trevor

  Something like that?

  $report = @)

  Get - VM | %{

  $row = "| Select Name, NumCpu, memory

  $row. Name = $_. Name

  $row. NumCpu = $_. NumCpu

  $row. Memory = $_. MemoryMB

  $report += $row

  }

  $total = "| Select Name, NumCpu, memory

  $total. Name = "totals".

  $total. NumCpu = $report | Measure-object-property NumCpu-sum | Select sum - ExpandProperty

  $total. Memory = $report | Measure-object-property-memory-amount | Select sum - ExpandProperty

  $report += $total

  $report

• export with the line of the spine

  I can't understand how to export the pdf file with a line of the spine along the "spreads". I see an option under "marks and bleed.

  You must draw manually. (I hope you did your layout with unique pages).

• Can I export/share a line of CC free file in pdf or illus cs2 so customer can view/edit?

  I can't find a clear answer to this question very simple, so I hope someone here can help me.

  I didn't buy my ink and drag, or used the software creative cloud. Before that I want to ensure that I understand what I can share with line and free level of CC. I want to use for a particular client who is still old school. Then... If I have a drawing created online on my ipad and a customer with an older macbook pro, always running CS2 (if OS x 10.6.8), and I have an ipad with line and a free creative cloud (but not CC versions of the Adobe software other lines), is it possible to:

  send a pdf can open and print?

  send him a file, it can open/edit/print in CS2?

  send her anything she can open, edit or print?

  Print something that I can post to it.

  I guess I'm basically wondering: what are my limits for printing/sharing of the line drawings, with only the free accession of CC?

  The short answer is no.

  Don't forget the free level of CC for CCStorage only. Although they do not mention you need a creative cloud (including all their desktop pro applications) subscription to export vectors.

  If your friend has a subscription of the CC you could ask him to sign with its details and transfer the files this way