XML Core Services 4.0 Service Pack 2 KB936181 update every night before closing.

I don't understand why the KB936181 above keeps saying that it needs to be updated and will update every night before closing. It's very annoying. It is said that it successfully updated each time but not go away and comes back. If you look at the history of the update, it updates every night. Can someone please?

Thank you

Hello

I suggest you follow the steps in troubleshooting section below and check if it helps:

Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

http://support.Microsoft.com/kb/910339

Hope this helps,

Tags: Windows

Similar Questions

  • Update of security for the Microsoft XML Core Service Pack 2 (KB954430)

    A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)

    Download size: 5.4 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    A security issue has been identified in Microsoft XML Core Services (MSXML) that could allow a malicious user to compromise your Windows system and take control. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. Once you have installed this item, it cannot be deleted.

    http://support.Microsoft.com
    The update above has been repeatedly updated on my computer. Is there a way to stop this and make sure that it is installed on my computer?

    Hi Eubenne,

    Please use the Community Forums for Vista.

    Try the following steps to solve the problem,

    Step 1: uninstall the update of the Panel-> programs-> programs and features-> uninstall a program-> view installed updates.

    Step 2: Download MSXML 4.0 Service Pack 2 (KB954430) security update manually and save it to the desktop http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=96a4413c-5261-4f69-83d0-932c430abd14

    Step 3: disable your antivirus software.

    Step 4: right click on the update and select the run as administratoroption.

    Step 5: complete the installation, restart the computer and updates.

    Please let us know if this was helpful.

    -------------------------------------------------------------------
    Naveen
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install XML Core Services 4.0 Service Pack 2 (KB954430)

    Have tried to install the update of security for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) since Nov 08 and it continues to fail; Microsoft .NET Framework 3.5 Service Pack 1 for .NET Framework 3.5 Family Update (KB951847) x 86 as well as two more security for Microsoft Works 8 update continues to fail also.  Receive the error Code 641 and 80070641 Code.  I submitted by e-mail to Microsoft and they tried to help, but none of their suggestions have helped solve this problem.   Would appreciate any help for this to be the problem, it prevents me to install other software such as Turbo tax and even new security software (Webroot).

    HI jroller

    Here is the link where to look some information useful http://support.microsoft.com/kb/954430 .
    This article describes information about the problems that the update for the .NET Framework 3.5 SP1: http://support.microsoft.com/kb/959209/ and just make sure you choose the link appropriate to your version of computers.

    Let us know how it works for you

    Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

  • The installation of 'Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) continues to repeat

    The installation of 'Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) continues to repeat
    I get "new updates available" icon in my toolbar, I install the update, but when I restart my computer the next day it's back. Check the update history and it shows that it has been installed successfully. It passed since the 16/05/2009 my computer does not show any major symptoms except sometimes slow downs (nothing serious or constant) I tried to delete the msxml4.dll file, but it is said that the action can not be performed. I also see the msxm4r.dll file and wonder if it is also a cause for concern.

    If you get the error 643 read this thread.  It covers this error code and the ways to address them.

    If you get a different error while you should start a new thread with your system information and the wire that you get.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

    A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

    Download size: 5.4 MB

    Whenever I start my laptop he wants to re-enstall service pack 2. How can I fix it?

    Glen Yoder

    Hi Gyoder,

    Thank you for visiting the forums!

    To resolve this issue, follow these steps:

    1. Click Start , click run , type cmd and press ENTER.
    2. At the command prompt, type ren %windir%\System32\msxml4.dll msxml4.old, and then press ENTER.

    Note When you press ENTER, you may receive the following error message.

    Cannot find the specified file.

    Ignore this message and proceed to step 3.

    3. At the command prompt, type exit and press ENTER.
    4. Visit the Microsoft Web site at the following address:

    5. Download and install the latest MSXML security update.

    For more information about this problem, go to

    http://VisualKB/VKBWebService/viewContent.aspx?scid=KB; EN-US; 941729 & PortalId = 1

    I hope this helps. Let us know.

    Dave D

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • A security update for Microsoft XML Core Services 4.0 Service Pack 2 for systems x 64 (KB954430) is not installed!

    A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64-based systems (KB954430) is not installed. Windows Update fails to install this update and error reports: 64 C code. The off button displays an alert and when you place the mouse over it it shows "installs the updates and then shuts your computer." When I press it it says is to install the update and my computer shuts down and when I restart it it shows it is update and configuration of the update but when loading Windows Vista, in windows update, it shows that updated security for Microsoft XML Core Services 4.0 Service Pack 2 for systems x 64 (KB954430) becomes available again. I tried to manually install the update by downloading, but when trying to install windows install indicates: "the feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder containing the installation package ' msxml.msi in the box below. »

    MSXML 4.0 SP2 (KB954430) and MSXML 4.0 SP2 appear in Control Panel programs and features. When I click on them the only option is 'an install. When I try to UN install these the same message appears when you try to install this update manually: "the feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder containing the installation package ' msxml.msi in the box below. »

    To try to solve this problem, I emptied historical Windows Update. I tried Windows Installer Cleanup to remove MSXML 4.0 SP2 (KB954430) and MSXML 4.0 SP2 so I can reinstall it but Windows Installer Cleanup crashes and displays a command prompt with a lot of text.

    If Windows Update has found that you don't need, you don't have to worry about this. They probably have fixed an error in the update system.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Constant Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) and updates (KB973688)

    I am running XP Professional 2002 SP3 on an Intel Core 2 T5500 @ 1.66 GHz Sony Vaio laptop. I have Windows Firewall turned on and I have BitDefender Total Security 2010 installed. I use the Mozilla Firefox browser and I have no problems connecting to the internet or to any other software.

    Whenever I start my laptop I'm invited to download 2 updates and every time I stop I'm invited to click to install downloads. It's always the same downloads, which are:

    Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)

    A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)

    Even after downloading and installing successfully these updates immediately get the yellow shield on the task bar telling me: "updates are ready for my computer 'if I click on install these updates, it is exactly the same updates again!

    See the "How to get help" and "Known issues" section of http://support.microsoft.com/kb/954430

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Security update for Microsoft XML Core Services 4.0 service pack 2 for x 64 systems (kb954430) _

    Tried to update the computer and this error came, help please

    For Microsoft XML Core Services 4.0 Service Pack 2 security updates may repeatedly appear in the update on Microsoft Update or Windows Update list

    See http://support.microsoft.com/default.aspx/kb/941729/> for possible help.

    If you cannot rename msxml4.dll in normal Windows mode, the http://support.microsoft.com/kb/315222Safe Mode start > and do it from there:

    How to get help and support for this update954430 Microsoft XML Core Services 4.0 Service Pack 2 KB

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International Support Web site:

    http://support.Microsoft.com/common/international.aspx?rdpath=4>

    North American customers can also obtain instant access to unlimited support free of charge e-mail or unlimited individual chat support by visiting the Microsoft Web site at the following address:

    http://support.Microsoft.com/OAS/default.aspx?&PRID=7552>

    For enterprise customers, support for security updates is available through your usual support contacts.

    Source: http://support.microsoft.com/kb/954430>

  • Update xml Core Services 4.0 Service pack 2 (KB954430)

    This update was automatic. Downloaded 32 times since 6 to date.

    I don't understand why.

    I don't know how to remove them.

    I have Windows 8.

    Windows 8?

    http://support.Microsoft.com/kb/941729/

    For Microsoft XML Core Services 4.0 Service Pack 2 security updates may repeatedly appear in the update on Microsoft Update or Windows Update list

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430) do not install it?

    Hello

    I was on this site throughout the morning looking for a solution to this issue.  I have a laptop running windows, op system 7 (do not know if it is 32 or 64 bit).  It came with software anti-virus free trial pre-installed on it (Norton).  This morning, I noticed that the update history showed a lot of failed attempts to install this update.  I clicked for more details on this topic, and this is the error message I get, "" WindowsUpdate_0000064C""WindowsUpdate_dt000".  Looks like a lot of people have problems with this.

    I tried the fixes of a message on this forum (see below):

    I tried to use the MS TOOL of DIFFICULTY, which has not helped in the installation of the update successfully

    I then downloaded KB954430 and saved on my hard drive and run it in safe mode, only to have and the following error message will appear, "ERROR OPENING INSTALLATION LOGFILE VERIFY THE SPECIFIC LOG FILE LOCATION EXISTS AND IS writable."

    What I am doing wrong?

    This error occurs with a particular update?

    1. reset the component of windows update and then try to install the updates, check if the problem is resolved. It has Fix tool link below will help you with the same

    How to reset the Windows Update components:http://support.microsoft.com/kb/971058

    If the patch tool does not help, you can follow the procedure manually.

    2 if the steps above does not resolve, then please note the updates listed in the updated view. Steps to follow:

    i. Click Start, in the search box, type in update

    II. click on windows Update

    III. click view update history

    Try to download the standalone version of the update and I install in safe mode. You can download the stand-alone version of the below link with number: http://www.microsoft.com/downloads

    You can check the link for the procedure to start your computer in SafeMode below:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    3 disable any third-party antivirus installed on your computer protection software and check if this is useful, if the problem is resolved, then you will need to uninstall the antivirus software and install it or change the settings of the same return.

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Install Sp3 (which already includes this fix)

    MSXML 4.0 Service Pack 3 (Microsoft XML Core Services)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7f6c0cb4-7a5e-4790-a7cf-9e139e6819c0&displaylang=en

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Microsoft XML Core Services 4.0 Service Pack 2 for x 64 (KB954430) & Code error 652 systems _

    I have a windows 7 Home Premium 64 - bit operating system and need to update security update for Microsoft XML Core Services 4.0 Service Pack 2 for systems x 64 (KB954430) but I keep getting these error code messages.
    "WindowsUpdate_00000652""WindowsUpdate_dt000"
    Please be advise. Moreover, it is an original windows 7 & Norton 360

    Please be advise. Moreover, it is an original windows 7 & Norton 360

    @Michael of New York: Please do not edit a post once someone has replied to it or a post later in the thread: we are not alerted of all the changes make you so I didn't added you to the above to your original post. Thank you.

    What is a Win7 64 bit computer?

    You have bought Norton 360?

    Was a Norton 360 (or any other application Norton) free trial or a free trial McAfee preinstalled on your Win7 computer when you bought it?

    The above, see if resetting Windows Update corrects the problem:

    How to reset the Windows Update components?
    [Ignore if APPLIED; KB971058 access via IE8 32 bit only. [Run the difficulty in the default and aggressive modes, and then restart your computer.
    http://support.Microsoft.com/kb/971058

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • A security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)

    HELP! Whenever I turn my laptop HP Windows Update keeps saying that I have an "update important' to be installed. For the first two times I installed it, and the Windows Update thing always tells me that it was "installed successfully" but everytime I turn on my CPU it keeps saying I need to install the a security update for Microsoft XML Core Services 4.0 Service Pack 2 (KB954430)!

    Why he does this. It automatically installed this 75 times UPDATE... What is going on! Help, please!

    http://support.Microsoft.com/kb/954430
    08-069: description of the update of security for XML Core Services 4.0: November 11, 2008

    See the known issues section and if it is of any help, see "where to find the section of assistance" for this update.

    K TaurArian [MVP] 2005-2010 - Update Services

  • Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) __Is anyone having trouble installing this download 'important '? Mine keeps failing and I think it's to make my computer. __

    Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)

    Hello

    Check if the update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) is already installed on your Windows from the Windows Update history. If it is installed go to programs and features, see installed updates and uninstall the update.

    Once it is removed, restart the computer and try to install the update even manually http://support.microsoft.com/kb/973688.

    Kind regards.

  • Windows Update Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)

    I have windows XP and I have had this for over a week, it fails to install, always I update shield on my lower riht had corner to this day he does not update whne I click it, someone out there - can help me please!
    Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)
    Update for Windows XP (KB976098) kiko * address email is removed from the privacy *.

    Hello kikocal,

    This might help: http://support.microsoft.com/kb/971058 for advice on all XP themes, visit the http://www.annoyances.org/exec/forum/winxp

  • Error 80004005 code update to Vista (KB972036) and Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) 643 error code.

    The first update (KB972036):

    During the restart process, after the message "do not turn off your computer", the following message (Please note that I use the Slovak version of Windows Vista, so I tried to translate the message to my knowledge):

    "Update has not been configured correctly, cancelling the changes.

    I tried to install it manually, I downloaded "Windows6. 0-KB972036-v2-x 86.msu", but the result is exactly the same.

    ------------------------------------------------------

    The other (KB973688) update:

    When installing it via windows update, there seems to be no problem, but it is not settled.

    So I checked c:\windows\system32\msxml4.dll and he says it's MS XML 4.0 SP2, version 4.20.9876.0

    I tried to install it manually as well, I downloaded "msxml4-KB973688 - enu.exe", but when I try to install, it comes up with the error message (screenshot below).

    http://img20.imageshack.us/img20/3381/msxml4error.jpg

    --------------------------------------

    Here's what I'm running:

    Windows Vista Edition Home Premium SP2 32-bit

    I'm just having trouble installing these two updates, everything else is pretty much installs ok, but whenever I update via windows update, I have to leave out both for the aforementioned reasons.

    I created my updates so that the system warns me of new updates are available, but I decide to download them and install them.

    I tried to change this setting to a State, where Windows automatically downloads and installs the updates by itself, but there was no difference and these two updates are always a pain in my virtual neck.

    Help, please! Thank you

    Hi ozziebabyxxx,


    Check the following services and ensure that they are running.
    1. Click Start , Type "services" in the search box
     
    Background Intelligent Transfer Service
    Cryptographic services
    Windows Update
     
     
    error code 643

    Follow the methods below to solve the problem:
     
    Method 1:
     
    This problem occurs when Windows Setup encounters an error. Error code 0 x 643 is provided by Windows Installer. These error codes are generic errors that basically indicate that an error has been detected by the Windows Installer.
     
    Check out the link for more details below:
     
    You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
     
    Method 2:
     
    Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Click on the link below and follow the instructions.
     
    How to reset the Windows Update components?
     
     
    Method 3:
     
    Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.
     
    You cannot install some programs or updates

    After you perform the methods stated above, you can download the standalone package for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) from the link below.
     
     

    Aziz Nadeem - Microsoft Support

Maybe you are looking for

  • Downloaded Firefox but the folder of the application icon does not appear

    I downloaded Firefox on my new Mac, but the icon which is supposed to show up to move to a folder of application does not appear.

  • Cannot set control schedule relative time

    Hi all I'm pretty new to LabVIEW, and I'm trying to set a time stamp time related. I put the control on the form, and then right-click and choose the display format. I have chosen Date unused, advanced editing. The control has a box with this in it:

  • Chrome blackBerry smartphones

    Another of the problems of signature in chrome.  I am stuck at the login page.  I rebooted and updated all my apps but I'm stuck.  I have the new DTEK50.  FYI, I have a business account and a Google account.  The account of Corp. uses OKTA sure on si

  • Gateway transport seems to start web listening port

    Tried to install 3.5 gateway Transport under CentOS 6.x. I can start the process and I see a few items in the list of processes for it, but I see nothing listening on port 80 by looking at the output of netstat and, of course, "nothing to see when yo

  • frm-10142 http listener does not

    Hi allI am unable to run any form of generator of forms, I get the error frm-10142 (http listener does not)tried different ports (8888, 9001, 7001)When I connect to the console like this:http://127.0.0.1:7001 / consoleand click on deployments (11.1.2