Gateway transport seems to start web listening port
Tried to install 3.5 gateway Transport under CentOS 6.x. I can start the process and I see a few items in the list of processes for it, but I see nothing listening on port 80 by looking at the output of netstat and, of course, "nothing to see when you try to access the web gui.
Any ideas?
Make sure that your host name is in your hosts file. The HTTP daemon uses the hosts file to determine what IP address to listen.
Tags: Cisco Services
Similar Questions
-
Cannot start the listening port on Windows 11 GR 2 RAC
I have a cluster 2 node RAC which worked well, until there was a restart of the nodes. Now, when I try to start the listener, I get an error and it does not start.
C:\users\administrator. CARS > srvctl start listener
RPRC-1079: could not start the ora of the resource. LISTENER.lsnr
CRS-5016: process 'C:\app\11.2.0\grid\bin\lsnrctl.exe' created by agent "C:\app\".
11.2.0\grid\bin\oraagent.exe' for 'Start' action failed: details at "(:CLSN00010)"
:))' in 'C:\app\11.2.0\grid\log\node1\agent\crsd\oraagent\oraagent.log '.
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 17-SEP-2013 12:50
: 50
Copyright (c) 1991, 2010, Oracle. All rights reserved.
From tnslsnr: Please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\app\administrator\product\11.2.0\dbhome_1\log\diag\tn
slsnr\NODE1\listener\alert\log. XML
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = NODE1.rac.woracle)(PORT=)
1521)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
CRS-5016: process 'C:\app\11.2.0\grid\bin\lsnrctl.exe' created by agent "C:\app\".
11.2.0\grid\bin\oraagent.exe' for 'Start' action failed: details at "(:CLSN00010)"
:))' in 'C:\app\11.2.0\grid\log\node1\agent\crsd\oraagent\oraagent.log '.
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 17-SEP-2013 12:50
: 57
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
CRS-2674: beginning with ' ora. LISTENER.lsnr' on 'node1' failed
C:\users\administrator. CARS > srvctl status listener
Listener LISTENER is enabled
Earphone HEADSET does not work
Guidance on what might be the problem with the system?
check the id below it will help out you.
-
I had trouble not getting no connection with WiFi, after weeks of allsorts following advice on forums etc, I found that the Wireless Pan DHCP Server does not start with error: Static Interfaces/Listening Ports is not available. my understanding is that the ports UDP 67/68, but when I run a Netstat I don't see them in the list. I checked windows firewall and they seem to be set to DHCP.
Any ideas would be useful.
Win 7 Home Premium 64 - Bit SP1
Please post your request here:
-
Listening port Oracle 11 g Enterprise edition will not start
Hi good morning all, I am a newbie. My interlocutor of oracle11g Enterprise edition cannot start, I tested the status of Auditor, I got information like this:
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 61: unknown error
I installed my oracle 11g enterprise edition only once with success, and I've never uninstalled it. The problem was strange, the day before yesterday that everything worked well, just yesterday morning after I started my computer, then I went to our services in order to start OracleserviceORCL, at the same time I noticed that the listener was not starting. Once I start the listener, it will automaticlly "stop". I couldn't understand why, it was really really frustrated. I googled a lot, but I have some information, but none of them give me a clear answer. I don't know how and what to do.
I use developer sql to access a remote database account, but not my own Oracle database account. I can still access my data back, it means that my oracle database is always good. What happened to the listener? What should I do next? Please help me. Thanks to all in advance and happy Thanksgiving!
BTW, my operating system is windows 7, 64 bit.Your welcome.
The link below describe how to install Oracle XE on Windows:
http://www.DevShed.com/c/a/Oracle/installing-Oracle-database-XE-on-the-Windows-platform/ -
Changing listening Port number Web in EBS
The listening port web of enforcement of BSE (the login page URL) can be changed after the fact using Note ID 760590.1 without affecting the port DB application was initially introduced to listening?
Thank you864641 wrote:
The listening port web of enforcement of BSE (the login page URL) can be changed after the fact using Note ID 760590.1 without affecting the port DB application was initially introduced to listening?Yes. However, should not be used the same pool of port on the nodes of level apps/db.
Thank you
Hussein -
Apex listening port Configuration problem.
Hello
I wanted to try the latest Restful services in apex 4.2, I decided to install 2.0 listener Apex. I downloaded the file and followed the steps in the installation notes. As a sine qua non, I configured Restful services with success in the apex 4.2 with Oracle 11 g Express Edition. However, the installation of listener seems to be not correctly complete the following installation feed back.
Simply, it crashes in the last line, and I couldn't make any progress.D:\software\apex_listener>java -jar apex.war This Listener instance has not yet been configured. Please complete the following prompts Enter the location to store configuration data:d:\apexlistnerconf Dec 27, 2012 3:34:47 PM oracle.dbtools.common.config.cmds.ConfigDir execute INFO: Set config.dir to d:\apexlistnerconf in: D:\software\apex_listener\apex.war Dec 27, 2012 3:34:49 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder INFO: Using configuration folder: D:\apexlistnerconf\apex Enter the name of the database server [localhost]: Enter the database listen port [1521]: Enter 1 to specify the database service name, or 2 to specify the database SID [1]:2 Enter the database SID [xe]: Enter the database user name [APEX_PUBLIC_USER]: Enter the database password for APEX_PUBLIC_USER: Password must not be empty Enter the database password for APEX_PUBLIC_USER: Confirm password: Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:3 Dec 27, 2012 3:37:03 PM oracle.dbtools.common.config.file.ConfigurationFiles update INFO: Updated configurations: defaults, apex Enter 1 if you wish to start in standalone mode or 2 to exit [1]: Enter the APEX static resources location or Enter to skip:D:\software\apex42en\apex\images Enter the HTTP port [8080]: Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Standalone execute INFO: NOTE: Standalone mode is designed for use in development and test environments. It isnot supported for use in production environments. Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Standalone execute INFO: Starting standalone Web Container in: d:\apexlistnerconf\apex Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Deployer deploy INFO: Will deploy application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Deployer deploy INFO: Deployed application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml Dec 27, 2012 3:41:18 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder INFO: Using configuration folder: D:\apexlistnerconf\apex Default Database connection not configured properly Dec 27, 2012 3:41:20 PM oracle.dbtools.rt.web.SCListener contextInitialized INFO: Oracle Application Express Listener initialized Application Express Listener version : 2.0.0.354.17.06 Application Express Listener server info: Grizzly/1.9.49 Dec 27, 2012 3:41:20 PM com.sun.grizzly.Controller logVersion INFO: GRIZZLY0001: Starting Grizzly Framework 1.9.49 - 12/27/12 3:41 PM Dec 27, 2012 3:41:20 PM com.sun.grizzly.SelectorHandlerRunner handleSelectException SEVERE: doSelect IOException java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3 at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432) at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378) at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188) at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Dec 27, 2012 3:41:20 PM com.sun.grizzly.http.SelectorThread$3 onException SEVERE: Exception during starting the controller java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3 at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432) at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378) at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188) at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source) java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3 at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432) at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378) at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188) at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Dec 27, 2012 3:41:20 PM oracle.dbtools.standalone.Standalone execute INFO: http://localhost:8080/apex started.
Can you please help to find out what was wrong?
Thanks in advance.
Kind regards
NatarajanHello
I updated the apex listener port 8080 and it does not give this error now.
However, he always says "Database connection by default not configured correctly"
I gave the name of SID as xe, which is the default value and that the correct SID for my DB also.
>SID = xe is correct since you are using 11g XE.
What is more important, is that you may be able to access the Apex Application Builder via the ApexListener or not.
If Apex is not accessible, then the thing to check would be the Apex_Public_user password. Can you connect to XE using Apex_Public_user with the password that you provided when setting up the ApexListener?
Also make sure the Apex_Public_user and 2 other users ApexListener 2.0EA, are UNLOCKED.See you soon,.
-
APEX does not open after you have created the new Oracle listening port
Hi guys,.
I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
I use Oracle XE 11 g and APEX 4.2
C:\Windows\System32 > sqlplus sys as sysdba
SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter the password:
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
GETHTTPPORT
-----------
8080
SQL >
so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
Kind regards
Marie Claire
Published by: 1004608 on May 7, 2013 14:40Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)
It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.
(DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW) )
-
Cannot start web server on the executable file
Hello
We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.
As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.
I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.
When executing:
- The code will sit in the while loop until I press stop.
- Web server: Active Server = FALSE
- Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">50ms>
It's the ini file to the executable file:
[WebTest]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
server.tcp.serviceName = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.Enabled = True
WebServer.TcpAccess = "' + * '"
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAnd it is the Web server configuration file:
ErrorLog "$LVSERVER_ROOT/logs/error.log".
LogLevel 3
The default server name
DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
Listen 8000
ThreadLimit 10
TypesConfig "$LVSERVER_ROOT/mime.types»
DirectoryIndex index.html
LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule dir libdirModule
LoadModule copy libcopyModuleAddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandlerAddHandler dirHandler
AddHandler copyHandler"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
KeepAlive on
KeepAliveTimeout 60
Timeout 60As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?
I tried the things:
- Copy a new default configuration file before the entry into force
- Writing a predefined file (encoded) before initializing config
- Definition to root before initializing directory (it actually generates an error because the server is not active...)
- Set WebServer.Active = TRUE several times inside the while loop
- Toggle the web server in the ini file
System:
- LabVIEW 2010
- PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!
Ben
Hi Marco, thanks for the reply.
I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!
If anyone is interested, here's the problem:
The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!
This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.
AND
You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.
The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup
-
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 2 November 2015 13:10:52
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.131) (PORT = 1521)))
AMT-12543: TNS:destination host unreachable
AMT-12560: TNS:protocol adapter error
AMT-00513: Destination unreachable host
Linux error: 101: the network is inaccessible
lsnrctl start $
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 2 November 2015 13:10:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
From /u02/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System settings file is /u02/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u02/app/oracle/diag/tnslsnr/SERVER2/listener/alert/log.xml
Error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.131) (PORT = 1521)))
TNS-12545: Connect failed because target host or object does not exist
AMT-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux error: 99: cannot assign requested address
Listening port could start. See the above error messages...
test if 192.168.1.131 is to ping requests
ping 192.168.1.131
-
Cannot start the listener in Oracle 12 c
Hello
I installed oracle 12 c on windows server 2012. I recently changed the server IP and I encountered a problem in starting the listener. The listener is unable to start services.
When I run the 'stat lsnrctl"I received the following error message:
Started with pid = 2188
Error listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=WIN-IPEC001.lan) (PORT = 1521)))
TNS-12545: Connect failed because target host or object does not exist
AMT-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Windows 64-bit error: 1001: unknown error
Mon at 13:35:41 01 June 2015
System settings file is C:\app\Administrator\product\12.1.0\dbhome_1\network\admin\listener.ora
Log messages written to C:\app\Administrator\diag\tnslsnr\WIN-IPEC001\listener\alert\log.xml
Trace information written to C:\app\Administrator\diag\tnslsnr\WIN-IPEC001\listener\trace\ora_1528_2468.trc
Trace level is currently 0
All nicely experts advise on what I can do to solve this error.
Thanks and greetings
Correct - but the error message is typical of the hostname resolution failed.
-
How to change the default listening port?
Hi all
11.2.0.4
RHEL 6.5
I managed to install Oracle Db 11.2.0.4 on RHEL 6.5
He created a default listener uses port 1521.
With the following entries in listener.ora.
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0.4/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = ip-10-0-0 - 216.ec2.internal)(PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
How can I change the port in 1522? Can I just he replace value of listener.ora?
Should I also change the value of KEY = EXTPROC1521 to KEY = EXTPROC1522?
I tried to change the port in 1522 in the listener.ora but when I start "lsnrctl status".
[oracle@ip-10-0-0-216 admin] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on March 7, 2015 06:19:54
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start date March 7, 2015 06:19:05
Uptime 0 days 0 h 0 min 49 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0.4/db_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/IP-10-0-0-216/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = ip-10-0-0 - 216.ec2.internal)(PORT=1522)))
The listener supports no services
The command completed successfully
Now, it does not support the services ORCL which is the default database installed
I can not connect to the database the string '@orcl' of both connection using the default
[oracle@ip-10-0-0-216 admin] $ sqlplus system/manager@orcl
SQL * more: version 11.2.0.4.0 Production on Sat Mar 7 06:23:50 2015
Copyright (c) 1982, 2013, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Help, please...
Thank you
MK
Hello
As said earlier after which the listening port, you must update the parameter local_listener database as below:
ALTER system set local_listener ='(ADDRESS = (PROTOCOL = TCP) (HOST = ip-10-0-0 - 216.ec2.internal)(PORT=1522))'
editing the system registry;
HTH,
Pradeep
-
I use 10g release 2 under oel 5.5 inside vmware
I want to create multiple listener to my database and aal of them to be registered dynamically
I had created two earphone using netmgr one is by default is not set by default to port 1522
Here is my listener.ora file
AUDITEUR1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = pawii.oraexpert.com))
)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pawii.oraexpert.com) (PORT = 1521))
)
I want to record dynamically
I pulled lsnrctl start
and lsnrctl start (no default listening port) auditeur1
both the listener don't start but the default receiver support no no services
I had bu db start again its not supporting all services why?
and if I specify services database with the help of netmgr then the entry goes in listener.ora and make static recording which always show status unknown
so, how can I do dynamic registration?You must indicate your instance where are listeners. Run these two commands:
alter system set local_listener='(address_list=(ADDRESS = (PROTOCOL = TCP)(HOST = pawii.oraexpert.com)(PORT = 1522))(ADDRESS = (PROTOCOL = TCP)(HOST = pawii.oraexpert.com)(PORT = 1521)))'; alter system register;
and the registration will then be automatic.
-
Cannot start the listener in Oracle 10 g personal edition
Hi all
I'm trying to start the listener on my personal edition of Oracle 10 g. I tried this category ' Windows tools administration, click 'Services '. I also tried the command line. The two methods fail. Here are the error messages for each method:
In "Services" in Windows:
In "Command Line":The OracleOraDB10g_home1TNSListner service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
Ideas have this problem could be solved.D:\oracle\product\10.2.0\db_1\BIN>lsnrctl start LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-MAY-2012 09:47:02 Copyright (c) 1991, 2005, Oracle. All rights reserved. Starting tnslsnr: please wait... TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.ora Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc))) Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ABCDEFG)(PORT=1521))) TNS-12542: TNS:address already in use TNS-12560: TNS:protocol adapter error TNS-00512: Address already in use 32-bit Windows Error: 48: Unknown error Listener failed to start. See the error message(s) above... D:\oracle\product\10.2.0\db_1\BIN>
Thank you in advance,
SeyedSeyed_G wrote:
In the past, I could start the receiver under the heading 'Services', but no more.Listening port Oracle does not start when the OS is down.
Difficulty at the OS level, which has changed or ruptured.
Oracle is a victim; not guilty.
This system gets its # IP via DHCP?
LOOPBACK connector has been installed on this system?
-
Hi, I do not know why the listener is not more work. I tried to start it, but it does not work. There no linux for the listener process.
lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on November 16, 2011 10:55:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
From /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System settings file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/oracle/listener/alert/log.xml
Error listening on: (ADDRESS = (PROTOCOL = ipc)(PARTIAL=yes) (QUEUESIZE = 1))
Is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = oracle. Domain.com) (port = 1521)))
AMT-12557: TNS:protocol adapter not loadable
AMT-12560: TNS:protocol adapter error
AMT-00527: Protocol adapter not loadable
Listening port could start. See the above error messages...
I tried to remove him via netca and redo another but the problem still there...
My environment variables are set correctly.
oracle tnsping. Domain.com 1521
AMT Ping utility for Linux: Version 11.1.0.6.0 - Production on November 16, 2011 10:56:47
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Use settings files:
/U01/app/Oracle/product/11.1.0/Db_1/network/admin/SQLNET.ora
EZCONNECT adapter used to resolve the alias
Try to contact (DESCRIPTION = (CONNECT_DATA = (SERVICE_NAME =)) (ADDRESS = (PROTOCOL = TCP)(HOST=127.0.0.1) (PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST=127.0.0.1) (PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST=127.0.0.1) (PORT = 1521)))
"AMT-12541: TNS:no listener.
the newspaper of xml alerts:
< time msg ='2011 - 11-16T 10: 55:08.236 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > system settings file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.237 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > log messages written to /u01/app/oracle/diag/tnslsnr/oracle1/listener/alert/log.xml
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.237 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > trace information written to /u01/app/oracle/diag/tnslsnr/oracle1/listener/trace/ora_11850_47802449326800.trc
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.237 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > Trace level is currently 0
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.237 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt >
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.238 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > Started with pid = 11850
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.239 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > listens on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = oracle. Domain.com) (port = 1521)))
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.239 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > error listening on: (ADDRESS = (PROTOCOL = ipc)(PARTIAL=yes) (QUEUESIZE = 1))
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.239 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > is no longer listening on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = oracle. Domain.com) (port = 1521)))
< / txt >
< / msg >
< time msg ='2011 - 11-16T 10: 55:08.239 + 01:00 ' org_id = 'oracle' id_comp = 'tnslsnr.
type = 'UNKNOWN' level = host_id '16' ='oracle. Domain.com"
host_addr = '127.0.0.1' >
< txt > TNS-12557: TNS:protocol adapter not loadable
AMT-12560: TNS:protocol adapter error
AMT-00527: Protocol adapter not loadable
< / txt >
< / msg >
RLY thx for the help I'm dsapointed :/
I tried to use a sample listener.ora, but got the same error, the file is not ignored, but it doesn't work.
There is no listener proc, I need to have a process like that, I guess:
/U01/app/Oracle/product/11.1.0/Db_1/bin/tnslsnr inherit LISTENER
I don't see anything on port 1521:
netstat | grep 1521
Did not pass 10g and 11g
Published by: user8833504 on 16 nov. 2011 04:24Set permissions on referenced dir:
sntuscrt: cannot create dir /var/tmp/.oracle
Tip: instead of posting/check together .trc file content, it is often enough to write the article nserror and a few lines before, at least to start with.
Published by: orafad on November 17, 2011 14:36
-
Select <; of the Listener Port number >; in which_table?
I am writing a SQL script which, among other things, disconnects from Oracle and then reconnects to the same instance under a different name. I'm able to query v$ database and v$ instance to get most of the information I need (host, name of service, etc.) for the part of reconnect. The only part that miss me is the listener port number. I could hardcode it 1521, but it's not very flexible. Currently, I am asking the user (who is usually me) for the listening port number in the SQL script, but that just seems a little lame. So my question is this: is there a view or a table somewhere in the schema sys that I could use to display the configuration of the earpiece? I work mainly with the gr 10, 2 + databases.No, I don't think that that is maintained in one of the views and is not soemthing that you should believe would keep have changed (if the implementation of the network people are good). In order to check once and you should be fine.
Aman...
Maybe you are looking for
-
second row of keys not working only not on the apple bluetooth keyboard
The second row of keys keyboard bluetooth of iMac (the Board older with batteries) do not work. Thoughts? Thank you LGS properties
-
Executable VI with Labview 2011
Hello everyone, I'm doing an executable on LabVIEW 2011 SP1. I've never done before, but in my project, I go to tools-> Build Application (EXE) from VI... I check to make sure that all the Sub VI are in the Dependencies tab and I put the way I want t
-
Hello I set my screen resolution of 1440 x 900, which is recommended, but have these problems: -Some programs starts, but doent open window -the mouse disappears outside on the left side of the screen -aero stops working I had this problem before, bu
-
Save the png alpha mask and background color
place vote 0 down vote favoriteMy product uses 100 + white icons on a transparent background. How can I save icons with a color background, so I can see the icons in the folder view - but keep the cutting of the icon? Can I use an alpha matte, or a m
-
Get the Parent for each record in the child
Dear Experts,I have a table that contains the parent and child information. I need to make a request to get the parents of each book of the child table. I tried to write the query but does not get the expected results. Please help me.Table: relations