XML - rpc Server 2008

Similar Questions

• Problem with Server 2008 window after delete "pending.xml" not a good way.

  Hello

  Actually, I was stuck at stage 3 of 3 window 2008 Server Update. I solved this problem by performed only "del c:\windows\winsxs\pending.xml" on the installation disc - invite to dot. After that, I could access my desktop. But there was another problem occur as shown below:

  (1) I could update the file in the window, but I could not update the last update file that is the window Server 2008 previously stuck.

  (2) network icon shows no internet connection, but I have always seen my ip address in internet explore and remote computer could still connected, but displays error cannot access the office. I double click on the network icon, it shows "Unknow" "the dependency service or group could start. I can't not verification of diagnosis. It shows me start "policy and network access Service" in the Services. I try but pop up error message.

  (3) in the Server Manager, role summary shows Red Cross serving files, network and Access Services, Terminal Server Services strategy and the Web

  Server (IIS).

  (4) antivirus software cannot start properly.

  You have an idea to solve my problem?

  Thank you very much and best regards, Teresa.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• Server 2008 R2 Active Directory Certificate Services does not start

  Hello

  I had a power failure on both of my units of WD Sentinel DX4000 running Windows Server 2008 r2. Come to fine and checked the integrity but now a unit gives me an error and does not start the Active Directory Certificate Services. I checked google and read where I need to run the eseutil.exe on the CA database, but discovered that utility is provided only with the server Exchange that I'm not running. Is there another utility that allows you to defragment and correct the Microsoft database. Here is the error I get when you try to start it:

  Log name: Application
  Source: Microsoft-Windows-CertificationAuthority
  Date: 28/07/2014 06:01:39
  Event ID: 17
  Task category: no
  Level: error
  Keywords: Classic
  User: SYSTEM
  Computer: WDOffice
  Description:
  Certificate Services Active Directory did not start: could not initialize the connection of database for WDOFFICE-CA.  Error 0xc8000147 (SEE:-327).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      17
      0
      2
      0
      0
      0 x 80000000000000
     
      40337
     
     
      Application
      WDOffice
     
   
   
      WDOFFICE-CA
      Error 0xc8000147 (ESE:-327)
   
  

  Any help would be greatly appreciated,

  Thank you

  Bob

  BBob

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Difficult communication between Windows Server 2008 R2 and Windows Server 2008 R2

  I have a client-server application. The application server is installed (Jboss 4.2) on a computer that uses Windows 2003. The Jboss does not have Local system, but a user who has administrator rights. Among other features, this application communicates with other servers that use Windows Server 2008 R2, to find all the services of Jboss that are installed on these machines, their status, the databases that are connected to them, the ports (by checking the file jboss - service.xml, oracle - ds.xml). This communication is done by sending orders sc, as (and other controls to start and stop services):

  Status of request \\server SC = all | find/i 'jboss ' | find/i 'service_name ' | find/i "_q".

  My problem is that I have to migrate this application from Windows 2003 to Windows 2008 R2.  After I installed it on my new machine, I saw that the application is not behavies as it should. I managed to observe that the response time to send the same command (the one above) to Windows 2008 R2 to Windows 2008 R2 takes more time that sending the same command from Windows 2003 to Windows 2008 R2.

  Is something changed in the sc command or there's a problem with the security rights?

  If you have an idea, please give me a feedback.  This problem is beyond my knowledge.

  You can find server gurus in the following forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  This forum deals with domestic users of questions, so using Server forums you will get a much better response.

• We hit our internal certificate ceiling Windows Server 2008 R2. How many certificates can be triggered?

  We hit our internal certificate ceiling Windows Server 2008 R2.  How many certificates can be triggered?  Here's the error received:

  Log name: Application

  Source: Microsoft-Windows-CertificateServicesClient-registration auto

  Date: 24/09/2012 10:31:16

  Event ID: 64

  Task category: no

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: xxxxxxxx.dot.com

  Description:

  Certificate for the local system with footprint 0e ee 1 c 61 33 56 d6 d7 14 37 22 59 66 2 c 1f be 71 9f 6 b 6F is about to expire or already expired.

  The event XML:

  http://schemas.Microsoft.com/win/2004/08/events/event">

  64

  0

  3

  0

  0

  0 x 80000000000000

  21262

  Application

  XXXXXX

  local system

  0E ee 1 c 61 33 56 d6 d7 14 37 22 59 66 2 c 1f be 71 6F 6B 9f

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• DotNetFramework error when I try to install SQL Server 2008 R2

  When I try to install SQL Server 2008 R2 I get a dotnetframwork below. If I click on continue some of the façade of the database will not install no and if I left it stop the installation.

  I tried to install dotnetframework 3.5 on my computer of 32-bit windows 7, but when I run the exe file it will extract the file, but then won't do anything else. I currently have dotnetframework 4.0 and I do not know if this does not prevent installation of 3.5, which could be the origin of the error with the SQL installation.

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings Manager: could not load file or assembly 'System, Version = 4.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089' or one of its dependencies. The system cannot find the specified file. (C:\Users\Tremec\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config, line 5)---> System.IO.FileNotFoundException: could not load file or Assembly 'System, Version = 4.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089' or one of its dependencies. The system cannot find the specified file.
  ' File name: ' System, Version = 4.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089 '.
  to System.Configuration.TypeUtil.GetTypeWithReflectionPermission (host IInternalConfigHost, String typeString, Boolean throwOnError)
  to System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init (configRecord, SignatureStruct SignatureStruct RuntimeConfigurationRecord)
  to System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions (configRecord, SignatureStruct SignatureStruct RuntimeConfigurationRecord)
  to System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory... ctor (configRecord, SignatureStruct SignatureStruct RuntimeConfigurationRecord)
  at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory (SignatureStruct SignatureStruct)
  at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord (String configKey, Boolean & isRootDeclaredHere)

  WRN: Assembly binding logging is disabled.
  To enable the failure of link Assembly record, set the registry value [HKLM\Software\Microsoft\Fusion! EnableLog] (DWORD) to 1.
  Note: There is some pain associated with a record of failure performance link Assembly.
  To disable this feature, remove the registry value [HKLM\Software\Microsoft\Fusion! EnableLog].

  -End of the exception stack trace internal-
  at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord (String configKey, Boolean & isRootDeclaredHere)
  at System.Configuration.BaseConfigurationRecord.GetSectionRecursive (String configKey, Boolean getLkg, Boolean checkPermission, getRuntimeObject Boolean, Boolean requestIsHere, object & result, object & resultRuntimeObject)
  at System.Configuration.BaseConfigurationRecord.GetSection (String configKey, Boolean getLkg, Boolean checkPermission)
  at System.Configuration.BaseConfigurationRecord.GetSection (String configKey)
  at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection (String sectionName)
  at System.Configuration.ConfigurationManager.GetSection (String sectionName)
  at System.Configuration.ClientSettingsStore.ReadSettings (String sectionName, Boolean bool)
  to System.Configuration.LocalFileSettingsProvider.GetPropertyValues (SettingsContext context, Properties SettingsPropertyCollection)
  to System.Configuration.SettingsBase.GetPropertiesFromProvider (SettingsProvider provider)
  at System.Configuration.SettingsBase.GetPropertyValueByName (String propertyName)
  at System.Configuration.SettingsBase.get_Item (String propertyName)
  at System.Configuration.ApplicationSettingsBase.GetPropertyValue (String propertyName)
  at System.Configuration.ApplicationSettingsBase.get_Item (String propertyName)
  at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement)
  to Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Form.OnCreateControl)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.ScrollableControl.WndProc (Message & m)
  at System.Windows.Forms.ContainerControl.WndProc (Message & m)
  at System.Windows.Forms.Form.WmShowWindow (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5448 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
  ----------------------------------------
  LandingPage
  Assembly version: 10.0.0.0
  Win32 Version: 10.50.1600.1 ((KJ_RTM). 100402-1540)
  Code: file:///D:/x86/LandingPage.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5446 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5442 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  Microsoft.SqlServer.Configuration.Sco
  Assembly version: 10.0.0.0
  Win32 Version: 10.50.1600.1 ((KJ_RTM). 100402-1540)
  Code: file:///D:/x86/Microsoft.SqlServer.Configuration.Sco.DLL
  ----------------------------------------
  Microsoft.SqlServer.Chainer.Infrastructure
  Assembly version: 10.0.0.0
  Win32 Version: 10.50.1600.1 ((KJ_RTM). 100402-1540)
  Code: file:///D:/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  Accessibility
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4927 (NetFXspW7.050727 - 4900)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
  ----------------------------------------
  Microsoft.SqlServer.Management.Controls
  Assembly version: 10.0.0.0
  Win32 Version: 10.50.1600.1 ((KJ_RTM). 100402-1540)
  Code: file:///D:/x86/Microsoft.SqlServer.Management.Controls.DLL
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Your problem is better solved if you post to the forum Pro TechNet: http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itproinstall

  J W Stuart: http://www.pagestart.com

• Consume a Web service using javax.microedition.xml.rpc.Operation

  Requirement. Consume a Web Service using native libraries of Blackberry.

  Target WebService: http://ws.cdyne.com/WeatherWS/Weather.asmx

  WebService of the operation: http://ws.cdyne.com/WeatherWS/Weather.asmx?op=GetCityWeatherByZIP

  Environment: Eclipse JDE 1.3.0 with BB SDK Enterprise Server BB 5.0.0

  First Guide of: http://blog.bayestech.com/?tag=blackberry

  1 Java Stub

  public interface IWeatherServiceZip
  {
      public String getWeatherServiceByZip(String zipCode) throws java.rmi.RemoteException;
  
  }
  

  2. Service Java class

  import java.rmi.RemoteException;
  import javax.microedition.xml.rpc.ComplexType;
  import javax.microedition.xml.rpc.Element;
  import javax.microedition.xml.rpc.Operation;
  import javax.microedition.xml.rpc.Type;
  import javax.xml.namespace.QName;
  import javax.xml.rpc.JAXRPCException;
  
  import com.lm.bb.ws.interfaces.IWeatherServiceZip;
  
  /**
   * @author lmo0
   *
   */
  public class WeatherServiceZip implements IWeatherServiceZip, javax.xml.rpc.Stub
  {
      protected static final QName _qname_operation_GetCityWeatherByZIP = new QName("http://ws.cdyne.com/WeatherWS", "GetCityWeatherByZIP");
      protected static final QName _qname_GetCityWeatherByZIPResponse = new QName("http://ws.cdyne.com/WeatherWS", "GetCityWeatherByZIPResponse");
      protected static final QName _qname_GetCityWeatherByZIP = new QName("http://ws.cdyne.com/WeatherWS", "GetCityWeatherByZIP");
      protected static final Element _type_GetCityWeatherByZIP;
      protected static final Element _type_GetCityWeatherByZIPResponse;
  
      private String[] _propertyNames;
      private Object[] _propertyValues;
  
      public WeatherServiceZip()
      {
          _propertyNames = new String[]
          { ENDPOINT_ADDRESS_PROPERTY };
          _propertyValues = new Object[]
          { "http://ws.cdyne.com/WeatherWS/Weather.asmx" };
      }
  
      public void _setProperty(String name, Object value)
      {
          int size = _propertyNames.length;
          for (int i = 0; i < size; ++i)
          {
              if (_propertyNames[i].equals(name))
              {
                  _propertyValues[i] = value;
                  return;
              }
          }
          String[] newPropNames = new String[size + 1];
          System.arraycopy(_propertyNames, 0, newPropNames, 0, size);
          _propertyNames = newPropNames;
          Object[] newPropValues = new Object[size + 1];
          System.arraycopy(_propertyValues, 0, newPropValues, 0, size);
          _propertyValues = newPropValues;
  
          _propertyNames[size] = name;
          _propertyValues[size] = value;
      }
  
      public Object _getProperty(String name)
      {
          for (int i = 0; i < _propertyNames.length; ++i)
          {
              if (_propertyNames[i].equals(name))
              {
                  return _propertyValues[i];
              }
          }
          if (ENDPOINT_ADDRESS_PROPERTY.equals(name)
                  || USERNAME_PROPERTY.equals(name)
                  || PASSWORD_PROPERTY.equals(name))
          {
              return null;
          }
          if (SESSION_MAINTAIN_PROPERTY.equals(name))
          {
              return new Boolean(false);
          }
          throw new JAXRPCException("Stub does not recognize property: " + name);
      }
  
      protected void _prepOperation(Operation op)
      {
          for (int i = 0; i < _propertyNames.length; ++i)
          {
              op.setProperty(_propertyNames[i], _propertyValues[i].toString());
          }
      }
  
      public String getWeatherServiceByZip(String zipCode) throws RemoteException
      {
          Object inputObject[] = new Object[]
          { zipCode };
  
          Operation op = Operation.newInstance(_qname_operation_GetCityWeatherByZIP,    _type_GetCityWeatherByZIP, _type_GetCityWeatherByZIPResponse);
          _prepOperation(op);
          op.setProperty(Operation.SOAPACTION_URI_PROPERTY,"http://ws.cdyne.com/WeatherWS/GetCityWeatherByZIP");//SOAP Action
          Object resultObj;
          try
          {
          resultObj = op.invoke(inputObject);
          System.out.print(resultObj.toString());
          } catch (JAXRPCException e)
          {
          e.printStackTrace();
          Throwable cause = e.getLinkedCause();
          if (cause instanceof java.rmi.RemoteException)
          {
          throw (java.rmi.RemoteException) cause;
          }
          throw e;
          }
          return (String) ((Object[]) resultObj)[0];
      }
  
      static
      {
          _type_GetCityWeatherByZIPResponse = new Element(_qname_GetCityWeatherByZIPResponse,_complexType(new Element[]
                  { new Element(new QName("http://ws.cdyne.com/WeatherWS","GetCityWeatherByZIPResult"), Type.STRING, 0, 1, false) }), 1, 1,false);
          _type_GetCityWeatherByZIP = new Element(_qname_GetCityWeatherByZIP,_complexType(new Element[]
                  { new Element(new QName("http://ws.cdyne.com/WeatherWS","ZIP"), Type.STRING, 0, 1, false) }), 1, 1, false);
          }
  
      private static ComplexType _complexType(Element[] elements)
      {
          ComplexType result = new ComplexType();
          result.elements = elements;
          return result;
      }
  }
  

  3 problem

  There is no information about the exception that occurs when I try to debug my Application actually when you call the Web Service to:

  resultObj = op.invoke (inputObject);

  Any help.  If you have any other suggestions on how to consume a web service using BB. I don't want to use KSOAP2 because the source code is not updated more and prefer the native BB mode without using the 3rd party jars.

  Thank you

  How do you generate the stub class? Have you used Sun's Wireless Toolkit?

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Activation of Windows 8 on the domain network with the VAMT 3 (v6.2.9200.0) tool hosted on Server 2008 R2.

  Hello

  I am trying to activate a Windows 8 Pro machine on the network of our field.
  In preparation to win 8, I had already discovered the obligation to upgrade VAMT 2 to 3 and I downloaded the ADK and installed 3 VAMT (v6.2.9200.0) on the necessary 2008 R2 server with SQL 2008.
  It's a simple process and the service of the VAMT tool is running. I have installed all required keys, whose VAMT is quite satisfied.
  I also installed KB2757817, which is required when you run VAMT 3 tool on 2008 R2.
  I run slmgr /dlv to verify that the server is functioning properly and that he got an active response.
  VAMT found many existing PC to Windows 7 and Office 14, which have been established against the keys KMS we received an envelope. That tells me that the KMS service is running with happiness.
  
  To make sure I looked at the Server Manager event logs. KMS watch log many event 12290, where the server is conclusion machines on the network, however the PC Windows 8 in these events will return an 0xC004F042 error code in their data, but Windows 7 PCs return 0x0 in their data.
  The VAMT tool on the server log shows an error event 1000 VAMT Runtime.
  To do this, the data are:
  Error when update products: System.Runtime.InteropServices.COMException (0x800706BA): the RPC server is unavailable. (Exception from HRESULT: 0x800706BA) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal (Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementScope.InitializeGuts (Object o) at System.Management.ManagementScope.Initialize () at System.Management.ManagementScope.Connect () at Microsoft.Licensing.VolumeActivation.WmiConnection.Connect () at Microsoft.Licensing.VolumeActivation.UpdateProductsProvider.RefreshMachineGenericInformation () at Microsoft.Licensing.VolumeActivation.UpdateProductsProvider.UpdateProducts () on the machine using credentials
  On the pc of Windows 8, I ran the slmgr /dlv, that tells me as the ends of product key: J8CK4, however my KMS - keys on the ends of the server: FKQW7. This report also says that I need to run slmgr /ato to activate the machine? (Isn't this defeat the point of a KMS server if each machine must be activated in the personalized decoration?)
  The KMS on the PC log is empty. The application log howerver, contains the following: -.
  Information event ID 12288 - the client sent an activation request. (The data for this show the IP address of the server VAMT, so his attempts to connect with the right server.)
  Information event ID 1003 - software protection service has completed to verify the license status.
  ID 8198 error event - Activation of licenses (slui.exe) failed with the following error code: hr = 0xC004F074.
  As our network has its own firewall, I have disabled the firewall on all internal machines on the field so there should not be any restrictions on network services or protocols.
  The RPC service is running on the server and the computer of Windows 8.
  As you can see, this becomes a bit frustrating, especially as the server of the VAMT tool works very well with all Windows 7 and 2008 machines on the field.
  I looked on the internet for all existing media or documents in this regard, but most point to upgrade to the 6.2.9200 version of the VAMT tool, which I am already running.
  You may be able to offer any assistance would be much appreciated.
  Thank you
  Barry.

  TammyGPV,

  I suggest you to report your query in the TechNet forums to improve the assistance on server problems. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc

  Hope this information helps.

• 11g Enterprise Edition Release 11.2.0.1.0 to Microsoft SQL Server 2008 R2 (RTM)

  
  Good day to all,

  I think that I followed all the correct steps to establish connectivity, still nothing does not. Before launching the "bang-head-against_wall" sequence, I'm reaching for assistance.

  I appreciate all orientations.

  Here are the details:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  PL/SQL Release 11.2.0.1.0 - Production

  CORE 11.2.0.1.0 Production

  AMT for 32-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X 64)
  April 2, 2010 15:48:46
  Copyright (c) Microsoft Corporation

  Standard Edition (64-bit) on Windows NT 6.1 < X 64 >
  (Build 7601: Service Pack 1)
  (Hypervisor)

  Microsoft SQL Server ODBC Driver Version 06.01.7601

  Data Source name: GMEXCH
  Description of Data Source: GMEXCH
  Server: INFWDCSWNSERD01v
  Database: March
  Language: (default)
  Translate character data: Yes
  Log long-running queries: No.
  Log driver statistics: No.
  Use locale: No.
  Prepared statements option: drop temporary procedures on disconnect
  Use the failover server: No.
  Use ANSI quoted identifiers: Yes
  Use ANSI Null, fillings and warnings: Yes
  Data encryption: No.

  Microsoft SQL Server ODBC Driver Version 06.01.7601

  Running connectivity tests...

  Connection attempt
  Connection established
  Checking the option settings
  Disconnecting from the server

  TESTS COMPLETED SUCCESSFULLY!

  initGMEXCH.ora
  HS_FDS_CONNECT_INFO = GMEXCH
  HS_FDS_TRACE_LEVEL = 0
  HS_AUTOREGISTER = TRUE

  
  Listener.ora
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = GMSERV)
  (ORACLE_HOME=C:\app\LOGIX\product\11.2.0\dbhome_1)
  (PROGRAM = hsodbc)
  )
  )

  tnsnames.ora
  GMOTD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (Address = (PROTOCOL = TCP)
  (HOST = 10.94.34.124)
  (PORT = 1521)))
  (CONNECT_DATA = (SID = GMSERV))
  (HS = OK)
  )

  SQLNET.ora
  SQLNET. AUTHENTICATION_SERVICES = (NONE)

  LSNRCTL > status
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Prod
  ction
  Start date February 10, 2014 15:40:01
  Uptime 0 days 0 h 18 min 39 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\app\LOGIX\product\11.2.0\dbhome_1\network\admin\lis
  Tener.ora
  C:\app\logix\diag\tnslsnr\WVHUNTID0017\listener\alert\ log listener
  log. XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=WVHUNTID0017) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=WVHUNTID0017) (PORT = 8080)) (picked
  (on = http)(session=RAW))
  Summary of services...
  Service 'GMSERV' has 1 instance (s).
  Instance of 'GMSERV', status UNKNOWN, has 1 operation for this service...
  Service 'LOGIXFTRXDB' has 1 instance (s).
  'Logixftr' instance, State LOAN, has 1 operation for this service...
  Service 'logixftr' has 1 instance (s).
  'Logixftr' instance, State LOAN, has 1 operation for this service...
  The command completed successfully

  C:\Windows\System32 > tnsping GMOTD

  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 10-FEB-2
  014 15:48:25

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:
  C:\app\LOGIX\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS_LIST = (Address = (PROTOCOL = TCP) (HOST
  = 10.94.34.124) (PORT = 1521))) (CONNECT_DATA = (SID = GMSERV)) (HS = OK))
  OK (20 ms)

  SQL > show parameter global_names;

  VALUE OF TYPE NAME
  ------------------------------------ ----------- -------
  global_names boolean FALSE

  
  SQL > create database GM link to connect to "agaf_dhdhd", identified by
  2 'xhxhxhxh!' using 'GMOTD ';

  Database link created.

  
  SQL > select * from wirecenters_web@GM;
  Select * from wirecenters_web@GM
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of GM

  The executable in the listener is called dg4odbc not hsodbc when you use 11.2. Please change: (PROGRAM = hsodbc) (program = dg4odbc). Then stop and restart the listener

  -Klaus

• vCenter 4.1, Server 2008 R2, the Webservices omitting management

  I googled my face and looking here as well but I did find something that exactly matches my screenplay, so here go us.

  vCenter System: new installation vCenter 4.1 on Server 2008 R2 with SQL SERVER 2005 Express.   IIS is not installed.

  Guests: 4 ESX 4.0

  Symptom 1: vCenter plugins customer will not activate, mistake of not being able to access the url for the xml files.

  Cause 1: Management Service of the Webservices guard fails with the following error (in the Windows event log):

  Log name: System

  Source: Service Control Manager

  Date: 2010-08-09 10:21:28

  Event ID: 7031

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: USBOSA00.americas.munters.com

  Description:

  The service of VMware VirtualCenter Management Webservices ended unexpectedly.  He did this 3 times.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  The event XML:

  -Josh.

  not the error of exact event IDS, but it may be useful

  http://KB.VMware.com/kb/1009168

• Manager of customization with Server 2008?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  Does anyone know if the specification of customization Manager will work with Server 2008 model?

  Yes, he does.

  When I create a new set of specifications through the wizard, there is no option to choose anything other than "windows" or "Linux".  The section below these options makes reference to a custom sysprep answer file that let me hear XP/2000/2003. Bascially Microsoft has deleted with Sysprep in 2008 (you can run a very simple, no custom version to change the SID and do an OOBE) or create an XML part that is personalized through Windows AIK. So I am wondering if it is supposed to be for 2008 too? I have a feeling that it is not. How do others are 2008 deployment models?

  It's the same as it was never really.  The only difference is that now you don't have to have the sysprep files copied in prior vCenter.  I have specificaitons of customization for 32-bit and 64-bit 2008 and 2008 R2.  Everything works fine.

  Good luck!

• Process of generation of Server 2008 crashes to the product key screen

  I am trying to build a device using media Server 2008 and the possibility to leave the product key blank in profile construction (for KMS activation later).

  The installation of the operating system hangs at the screen of product keys and all the ends of progress.

  I tried to jump the key entry of product at the level of the console (which usually works) and it keeps just backspace.

  Any ideas?

  You can try to use a different installation media by manually changing the xml file to build the profile and changing the name of OSImage used to install the operating system. The OSImage name indicates the catalog file on the installation media to use for the installation. This customization was mainly intended for users to create their own installation media, for example installation media patched with latest security updates.

  The following xml elements contain the parameters of installation media (look for "Windows Longhorn"). Update the settings as needed for the correct catalog file.

  "< vadk: ISO vadk:path="file:///opt/vmware/www/ISV/ISO/en_windows_server_2008_datacenter_enterprise_standard_without_hyperv_x64_dvd.iso "vadk:md5sum =" "vadk:containFiles =" sources/install_Windows Longhorn SERVERENTERPRISEV.clg"/ >"

  The element of vadk: ISO xml contains an vadk:containFiles attribute

  with a reference to the catalog file, it is used to validate the

  installation media.

  < vadk:UnattendedInstallVariables >

  < vadk:Variable vadk:name 'OSImage' = > Windows Longhorn SERVERENTERPRISEV < / vadk:Variable >

  The vadk:Variable/@vadk:name='OSImage' item store the OSImage

  name (catalogue) to use for this installation. It is usually the

  name of the catalog (clg file) without the prefix 'install_' and ".clg" file suffix.

• SQL for SQL Server 2008 Developer Data Modeler

  I am not able to connect to my SQL Server 2008 since the SQL Developer Data Modeler. Although I jtds - 1.2.jar my machine and I can connect SQL server through the SQL Developer, but still I am not able to connect through the Data Modeler. I need to rethink and to generate the data model for some existing patterns.
  
  Here's what I'm following: -.
  
  File Data-> shape-> import-> data dictionary-> add-> new JDBC, ODBC Bridge connection-> other third-party driver
  
  now when I give driver and the JDBC URL, it throws an error message indicating that the driver is not found.
  
  Please let me know what I can do to fix this problem, any help would be appreciated.
  
  Kind regards
  AVA

  I would try 1 to connect to the db of sqldeveloper (by jtds - uninvolved to ODBC) and see if you can browse your sql db queries and question in a worksheet. Export this connection to xml format, and then import that Modeler.