The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

Similar Questions

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• For Windows 7 and Server 2008 Windows Firewall

  Hello

  I have a Server 2008 R2 as a DC and four workstations to Windows 7 (32).  I have a requirement to have the windows firewall on the computers of Windows7 desktop and Server 2008 R2 domain controller.

  At the level of the Windows 7 Desktop, I can GPEDIT. MSC and manually add a firewall

  On the DC 2008 Server, I can add to

  1. Group Policy Management, default domain policy, firewall
  2. Group Policy Management, default domain controller policy, firewall

  But I can't get Windows 7 and Server 2008 Firewall work, 'Domain' under the network profile retains by default "Public" or "not identified."

  Any Suggestions?

  Thank you

  B

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• HP Pavilion 15-E007TU Windows 7 and Server 2008 windows - drivers please

  Hi team,

  Could you please help me about windows 7 and windows server 2008 drivers for the HP Pavilion 15-E007TU.

  Kind regards

  Sri.

  Hello:

  You can use the W7 64 bit drivers for the 4540 s of HP Probook except audio and card reader drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio:

  Accept the agreement, download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  This model card reader driver should also work on your.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Windows 7 and server 2008

  Two weeks ago, that I update 25 laptop from XP to Windows 7. They were already joined to the domain on the server with a given name. When I upgraded, I appointed the namesake. I saw that there were names duplicated in Active Directory, so I deleted the duplicate name. Should reflect on the early naming scheme. So now I get this error when you try to connect to the domain account:

  The database of security on the server doesn't have a computer account for this workstation trust relationship

  However, I can sign in for the computer account. Is there to remedy this?

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• What version of esxi supports Windows 8 and Server 2012

  We have ESXi 5.0 and vSphere 5.0.

  I want to make the smallest upgrade for our VMware supports Windows 8 and Server 2012.

  What upgrade do I do?

  According to the matrix of product interoperability VMwarevCenter Server 5.0 (without update) supports ESXi 5.0 Update 1 guests too.

  André

• How can I get my Calendar.exe program works in Windows 7?

  Calendar.exe worked with all Windows OS since windows 3.1.  It is easy to use, no problem at all.  It gives me the schedule for the day in 15 minute increments and has an alarm when arrives the time of appointment.  I can't find a program to replace what is simple and allows me to do what I was.  I tried to use the tool that is supposed to allow it in the Control Panel, but it does not work.  Can someone help me?

  Thank you

  Paul Staples
  E-mail address is removed from the privacy *.

  16-bit support unfortunately finished in Windows 7.  It's a shame, because some of these old Win 3.x programs were surprisingly useful even today.  They were written with an effective coding because they had to settle for less at a time where 4 MB (megabytes) of memory was the norm.  They rarely fell down, too.

  The only way to solve what I see is to download and install Microsoft Virtual PC (free from Microsoft) and set up a virtual PC for Windows 3.1.  I guess that you can configure a virtual XP instead, it should work also, since Win 3.x software runs on XP 32-bit.

  I hope this helps.  I used Word 6.0 forever, until I finally made the leap to Office 365.

• Manually install the update on the Server 2008 R2 - FATAL: unable to connect to service (hr = 80004002)

  When you manually install Windows updates on our server, we get the following error message:

  Setup Windows Update Standalone - Setup has encountered an error 0 x 80004002 - no such interface taken in charge.

  What follows is also found in windowsupdate.log

  2016-01-26 21:26:47:489 8340 1 b 10 Misc = process: C:\Windows\system32\wusa.exe
  2016-01-26 21:26:47:489 8340 1 b 10 Misc = Module: C:\Windows\system32\wuapi.dll
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - COMAPI: IUpdateServiceManager::AddScanPackageService -.
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ServiceName = Windows Update stand-alone installation
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ScanFileLocation = C:\97a2ae7429fcb9d0e21f1eb1a047983b\wsusscan.cab
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI FATALE: unable to connect to service (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI WARNING: failed to connect to the service. (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - exit code = 0 x 80004002

  Is there a way to repair the wusa.exe?

  Sorry, evil forums. Server issues are better managed on Technet. TechNet - Microsoft forums

• Install PeopleTools 8,53 Linux question: Windows Client and server Linux

  People,

  
  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  Now, I'm going to implement database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually using Starter named PT853 Oracle database instance. We need run Data Mover script in a Windows Client computer to populate the PeopleSoft database instance in Linux Sever machine.

  Suppose that:

  VM1: Server - Oracle Linux 5 Machine
  VM2: Client - Windows XP

  Nicolas has this tutorial:

  http://Gasparotto.blogspot.com/2008/01/on-PeopleSoft-road-PeopleSoft-database_10.html

  Step 15 to step 23, Nicolas does not explain how to connect VM2 (client) with VM1 (server) and load some data from to VM1 VM2.

  My questions are:

  First of all, we need to install PeopleTools 8.53 Windows version on the Client Windows XP when installing PeopleTools 8,53 Linux version on the machine Oracle Linux 5 Server?

  Second, how to connect with VM1 VM2, and then load to VM1 VM2 data?

  
  Thank you.

  My computer's processor 64-bit, so 32-bit install PeopleTools or Oracle database server, there must be some mistakes!

  No errors. 32 applications and processes will be running on 64-bit Windows. PeopleTools client programs (PSIDE, etc.) require the Oracle 32-bit client

  What are the 'Oracle customer' in Windows machine?

  'Oracle customer' is the "connectedness agenda" used by Oracle to connect to the Oracle database.

  You mean besides install PeopleTools 8.53 in the Windows client computer, still need to install the Oracle database server in Windows client machine?

  No, not the database server Oracle, just the Oracle client. You can download it separately from delivery for your client operating system.

• How to set the time between workstations and Server 2008 R2

  Hello world

  I have problem with my Server 2008 R2

  all the workstations on my company doesn't synchronize the time on the domain controller

  I tried many ways to set up automatic synchronization via command prompt (Net time) and its does not work

  Please help me configure the time between the DC and the workstations

  Thank you

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• CS5 Windows 7 or Server 2008 and memory Question

  Hi guys,.

  I will get CS5 with the first, but before I do that I want to make sure that my computer has configured it optimal for her.

  I have a Toshiba Satellite with iCore 3 and 2 GB of ram. So to start than I did today, I ordered 8 GB of ram for it because it's maximum, but.

  My next step is the choice of OS, I have Win7 32 bit installed which I want to replace with Win7 64 bit, but I'll be better with Windows Server 2008 R2 for example?

  Thank you very much

  I don't want to violate your closing the thread but didn't you know "because I heard that CS5 is very quick about it (Server 2008) because he did not get the apps Windows 7 for"the masses"works in the background." All you have to do is follow any good guide adjustment to get rid of all the fluff of Windows 7.  Here is a starting point, it is a first draft that I use.

• Message... BRS .exe program cannot start because msvcp71.dll missing. pls help.

  am under win 7, 64 bit. had something to do with HP 3 in 1 printer to the PC by using remove normal within devices/printers, as it had played all of a sudden, with difficulty (failed) reinstall removed!  a centuries-old HP drive for my system!, costumes to previous win and also not taken in charge now.

  also ran a file temporary cleaning via system tools and defragmented.  wake up message now on start... as above.  a scanner sfc, not found any internal breach. What is brs exe? and the dll file can be found somewhere in the SP and installed, which it is, why it is absent? reviewed 1 addictivetips.com solution proposal.  also found 1 suggestion to peer into MS Visual C ++ redistributable. Looks like once your out of warranty free very little real bug and help $free is available.

  Thank you.

  MG.

  msvcp71.dll is not a Windows file, it is a Visual Studio .net file and it is distributed by software vendors, you can have different versions of the file in the directories of different programs.

  John

• Windows Small Business Server 2008 starts after the full restoration of the PC

  I need help URGENT here. My company has a HP Vantage 2 hard drives with Windows 2008 Server. C and D, both have important data on them. D drive has become corrupted over the last weekend, and as a result, the server was very slow and data on the d drive was inaccessible. Unfortunately, D drive was somehow part of the boot sequence, and when I took it out, the computer would not start at all.

  Well made to purchase two new drives of 1 TB and replace the old records with them (we need the extra space anyway) and I did a complete system restore by booting from the windows installation CD and choose the external USB hard drive, we had that we were using for daily backups. Restore seemed to be going great, it took almost 3 hours and when he was done he had some problems.

  1 when the external USB drive was plugged and the system tried to start, it would give an error message and would not continue even if the BIOS was said to NOT boot from the USB key.

  2. when the drive has been disconnected, windows seems to start normally, I would still get up to a point where I had a mouse cursor that I could move on a black screen, but then the computer would suddenly reboot! Like someone hitting the reset button. I can hear the drives stop when it happens. The same thing happens with no failure or last known good configuration mode.

  It is a major problem because we do not have Internet or files. I wish there was a phone number that I can call for assistance. I would be happy to pay for it! even if it is a third party.

  I saw that Microsoft had "pay per incident" support but it just says: it is $ 260, what for? An hour? A case? A month?

  Any help would be appreciated

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/